Raspberries/mraa
Private
Public Access
2
0
Fork 0
Code Activity

src/x86/up2.c: Add UP^2 EVT3 support

Browse Source 
This commit adds a MRAA platform for the UP Squared board, EVT3 revision.
It handles the relevant FPGA configuration updates when using MRAA to
change pin modes or toggle GPIO directions.

Signed-off-by: Javier Arteaga <javier@emutex.com>
Signed-off-by: Nicola Lunghi <nicola.lunghi@emutex.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
This commit is contained in:
Javier Arteaga
2017-09-08 12:06:33 +01:00
committed by Brendan Le Foll
parent 6fad8d9888
commit 04a40ed63f
10 changed files with 409 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
docs/index.md
View File

@@ -48,6 +48,7 @@ Specific platform information for supported platforms is documented here:
- @ref phyboard-wega
- @ref nuc5
- @ref up
- @ref up2
- @ref joule
- @ref ft4222

86
docs/up2.md Normal file
View File

@@ -0,0 +1,86 @@
UP Squared Board {#up2}
================================
UP Squared is based on the Intel&reg; Celeron&trade; N3350 or the Intel&reg; Pentium&trade; N4200, formerly Skylake&trade;.
For the full specification please refer to the main specification page here:
http://www.up-board.org/upsquared/specifications-up2
Interface notes
-----------------------
The Up Squared present one Raspberry Pi compatible HAT connector and a 60 pin exHAT connector. Currently this implementation only support the interfaces through the HAT connector.
**I2C**
- 2 channels
- support: standard-mode (100kHz), fast-mode (400kHz) , Fast-mode plus (1MHz), High-speed mode (3.4MHz)
- bus frequency can be selected in BIOS settings.
- the default i2c channel is the one connected to the pin 3,5 of the hat
**SPI**
- Bus frequencies up to 10MHz are supported.
- 3 chip-selects.
**PWM**
- up to 3 channel of PWM
**UART**
- 1 high-speed UART is available
- supporting baud rates up to 3686400 baud.
- Hardware flow-control signals are available on pins 11/36 (RTS/CTS).
Please note that a kernel with UP board support is required to enable the I/O
interfaces above.
Refer to http://www.up-community.org for more information.
Pin Mapping
--------------------
The GPIO numbering in the following pin mapping is based on the Raspberry Pi
model 2 and B+ numbering scheme.
NOTE: the i2c device numbering depend on various factor and cannot be trusted:
the right way of determining i2c (and other devices) numbering is through PCI
physical device names. See the source code in src/x86/up2.c for details.
| MRAA no. | Function | Rpi GPIO | Sysfs GPIO | Notes |
|----------|--------------|------------|------------|--------------------------------|
| 1 | 3V3 VCC | | | |
| 2 | 5V VCC | | | |
| 3 | I2C1_SDA | 2 | 462 | I2C1 (/dev/i2c-1) |
| 4 | 5V VCC | | | |
| 5 | I2C1_SCL | 3 | 463 | I2C1 (/dev/i2c-1) |
| 6 | GND | | | |
| 7 | GPIO(4) | 4 | 433 | |
| 8 | UART1_TX | 14 | 477 | UART1 (/dev/ttyS1) |
| 9 | GND | | | |
| 10 | UART1_RX | 15 | 476 | UART1 (/dev/ttyS1) |
| 11 | UART1_RTS | 17 | 478 | |
| 12 | I2S_CLK | 18 | 326 | I2S0 (PCM Audio) |
| 13 | GPIO(27) | 27 | 432 | |
| 14 | GND | | | |
| 15 | GPIO(22) | 22 | 431 | |
| 16 | PWM3 | 23 | 471 | PWM Chip 0 Channel 4 |
| 17 | 3V3 VCC | | | |
| 18 | GPIO(24) | 24 | 405 | |
| 19 | SPI0_MOSI | 10 | 422 | SPI2 (/dev/spidev1.x) |
| 20 | GND | | | |
| 21 | SPI0_MISO | 9 | 421 | SPI2 (/dev/spidev1.x) |
| 22 | GPIO(25) | 25 | 402 | |
| 23 | SPI0_SCL | 11 | 418 | SPI2 (/dev/spidev1.x) |
| 24 | SPI0_CS0 | 8 | 419 | SPI2 (/dev/spidev1.0) |
| 25 | GND | | | |
| 26 | SPI0_CS1 | 7 | 420 | SPI2 (/dev/spidev1.1) |
| 27 | I2C0_SDA | 0 | 464 | I2C0 (/dev/i2c-0) |
| 28 | I2C0_SCL | 1 | 465 | I2C0 (/dev/i2c-0) |
| 29 | GPIO(5) | 5 | 430 | |
| 30 | GND | | | |
| 31 | GPIO(6) | 6 | 404 | |
| 32 | PWM0 | 12 | 468 | PWM Chip 0 Channel 0 |
| 33 | PWM1 | 13 | 469 | PWM Chip 1 Channel 0 |
| 34 | GND | | | |
| 35 | I2S_FRM | 19 | 327 | I2S0 (PCM Audio) |
| 36 | UART1_CTS | 16 | 479 | |
| 37 | GPIO(26) | 26 | 403 | |
| 38 | I2S_DIN | 20 | 328 | I2S0 (PCM Audio) |
| 39 | GND | | | |
| 40 | I2S_DOUT | 21 | 329 | I2S0 (PCM Audio) |