imraa.md: Added building imraa

Signed-off-by: Houman Brinjcargorabi <houman.brinjcargorabi@intel.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>

docs/building.md

@@ -1,10 +1,10 @@
 Building libmraa                         {#building}
 ===============
-
 libmraa uses cmake in order to make compilation relatively painless. CMake runs
 build out of tree so the recommended way is to clone from git and make a `build/`
 directory inside the clone directory.
 
+For building imraa check [building imraa](../master/docs/imraa.md)
 ## Build dependencies
 Not all these are required but if you're unsure of what you're doing this is
 what you'll need:

docs/imraa.md

@@ -0,0 +1,63 @@
+# Building mraa with imraa	{#buildingimraa}
+Imraa allows seamless communication between the Arduino101 and your mraa
+projects. Imraa will flash an arduino101 and allow automatic loading of the
+MRAA_GENERIC_FIRMATA subplatform to the first process that calls imraa_init
+(done through mraa_init automatically)
+
+## Build dependencies
+To build imraa, you'll need to build mraa with -DIMRAA=ON and all the normal
+dependencies for build mraa, see [Building mraa](../master/docs/building.md).
+You'll also need the following:
+* [dfu-utils-cross](https://github.com/arduino/dfu-utils-cross) or dfu 0.8 (0.9
+  does not work well with the 101). Precompiled binaries can be found on
+  [here](https://github.com/01org/intel-arduino-tools)
+* [json-c](https://github.com/json-c/json-c): likely called libjson-c-dev or
+  json-c-devel
+* libudev: likely called libudev-dev or libudev-devel
+
+## Basic build steps
+This will build mraa with imraa for the local default path. To build mraa for
+the system add `-DCMAKE_INSTALL_PREFIX=/usr` to the cmake command before
+running it.
+
+```bash
+mkdir build
+cd build
+cmake -DIMRAA=ON -DFIRMATA=ON ..
+make
+```
+
+After you've built mraa you can install using `make install`.
+
+## Running Imraa
+
+Before being able to use mraa to program the Arduino101 you will need to run
+imraa to flash the sketch file onto the board. The sketch file that imraa will
+look for is located here: [Arduino101 Sketch](http://iotdk.intel.com/misc/ConfigurableFirmataCurieImu.ino.bin).
+Once downloaded the file needs to be renamed and moved to the where mraa was
+installed. This is dependant on whether you installed locally or for the
+system. The example below is for a locally installed copy. Note this sketch is
+using ConfigurableFirmata + the [CurieIMU plugin](https://github.com/intel-iot-devkit/FirmataCurieIMU).
+
+
+```bash
+$ mv ConfigurableFirmataCurieImu.ino.bin firmata101.ino.bin
+$ mv firmata101.ino.bin /usr/local/share/mraa
+```
+
+You will also need to move the imraa config so that imraa can find it.
+```bash
+$ mv mraa/imraa/imraa.conf /etc/
+```
+
+To flash the board run imraa and it will create the lockfile and flash the
+Arduino101. You may need root permissions or to add yourself to the uucp or
+modem group to access the device node (typically /dev/ttyACM0).
+```
+$ imraa
+```
+
+After this is successful you will be able to use mraa like normal, in the
+background mraa will handle talking to the arduino101 by creating
+/tmp/imraa.lock which imraa_init() will parse on startup.
+