Raspberries/mraa
Private
Public Access
2
0
Fork 0
Code Activity

edison.md: minor fixes in Edison boards docs

Browse Source 
Some typo, letter case and formatting fixes.

Signed-off-by: Jakub Kramarz <jakub@hackerspace-krk.pl>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
This commit is contained in:
Jakub Kramarz
2015-05-06 02:36:36 +02:00
committed by Brendan Le Foll
parent 8e2ec01b61
commit f4d67b5f53
1 changed files with 15 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

30
docs/edison.md
View File

@@ -1,44 +1,44 @@
Intel Edison {#edison} Intel Edison {#edison}
============= =============
Intel(R) Edison is a dual core Silvermont Atom(TM) clocked at 500MHz. The Intel(R) Edison is a dual-core Silvermont Atom(TM) clocked at 500MHz. The
Edison also features 4GB of storage, 1GB ram and onboard wifi and bluetooth. Edison also features 4GB of storage, 1GB ram and on-board WiFi and Bluetooth.
Currently Supported boards: Currently supported boards:
- Intel Arduino board - Intel Arduino board
- Intel breakout board - Intel breakout board
UART UART
---- ----
On both the Arduino board and the breakout board, The avaible UART interface is on /dev/ttyMFD1 On both the Arduino board and the breakout board, The available UART interface is on /dev/ttyMFD1
Intel Arduino board Intel Arduino board
------------------- -------------------
The Edison used with the Arduino board has the following limitations The Edison used with the Arduino board has the following limitations
in libmraa: in libmraa:
- i2c is exposed on i2c-6, therfore you must use bus 6 and not bus 0 - I2C is exposed on i2c-6, therefore you must use bus 6 and not bus 0
- PWM avaible on default swizzler postions. (3,5,6,9) - PWM available on default swizzler positions. (3,5,6,9)
- SPI exposed is also used for the ADC. Try not to use your own CS. - SPI exposed is also used for the ADC. Try not to use your own CS.
- Max SPI speed is 25Mhz/4 ~6.25Mhz - Max SPI speed is 25Mhz/4 ~6.25Mhz
- SPI PM can sometimes do weird things you can disable it with: - SPI PM can sometimes do weird things you can disable it with:
echo on > /sys/devices/pci0000\:00/0000\:00\:07.1/power/control `echo on > /sys/devices/pci0000\:00/0000\:00\:07.1/power/control`
- ADC kernel module will return 12bit number but the ADC itself only has an - ADC kernel module will return 12bit number but the ADC itself only has an
accuracy of 10bits. This ADC is only included on the arduino board. accuracy of 10bits. This ADC is only included on the Arduino board.
- AIO pins are treated as 0-5 in mraa_aio_init() but as 14-19 for everything - AIO pins are treated as 0-5 in `mraa_aio_init()` but as 14-19 for everything
else. Therefore use mraa_gpio_init(14) to use A0 as a Gpio else. Therefore use `mraa_gpio_init(14)` to use A0 as a GPIO
- Arduino pin 7 can sometimes negatively impact the wifi capability, if using - Arduino pin 7 can sometimes negatively impact the WiFi capability, if using
wifi avoid using this pin WiFi avoid using this pin
Because of the way IO is setup with the tristate on the arduino breakout board Because of the way IO is setup with the tristate on the Arduino breakout board
IO will be flipped as it is setup. It's recommended to setup IO pins & IO will be flipped as it is setup. It's recommended to setup IO pins &
direction before using them in a setup() method or similar. It's impossible on direction before using them in a `setup()` method or similar. It's impossible on
this platform to avoid some GPIOs flipping on setup. this platform to avoid some GPIOs flipping on setup.
Intel(R) breakout board Intel(R) breakout board
----------------------- -----------------------
- Both I2C buses are avaible 1 & 6 - Both I2C buses are available 1 & 6
- IO on the miniboard is 1.8V - IO on the miniboard is 1.8V
Please see the following table on how the physical pins map to mraa pin numbers Please see the following table on how the physical pins map to mraa pin numbers