9bc91f4b12
This also adds the 2 LEDs on the 8260 radio to the mapping Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
4.1 KiB
4.1 KiB
Intel Joule
The Joule Board with the daughterboard (Tuchuck) board is supported by Mraa
Revision Support
Tuchuck
Interface notes
SPI Currently not working
UART Some pins are labelled as UARTs but are not configured in BIOS as UART so only available UART is on the FTDI header
Pin Mapping
Tuchuck has two breakouts, breakout #1 is 1-40 whilst breakout2 is 41-80. The LEDs are numbered from 100-103.
| MRAA Number | Physical Pin | Function |
|---|---|---|
| 1 | GPIO | GPIO |
| 2 | SPP1RX | GPIO |
| 3 | PMICRST | NONE |
| 4 | SPP1TX | GPIO |
| 5 | 19.2mhz | GPIO |
| 6 | SPP1FS0 | GPIO |
| 7 | UART0TX | GPIO |
| 8 | SPP1FS2 | GPIO |
| 9 | PWRGD | NONE |
| 10 | SPP1CLK | GPIO |
| 11 | I2C0SDA | I2C |
| 12 | I2S1SDI | GPIO |
| 13 | I2C0SCL | I2C |
| 14 | I2S1SDO | GPIO |
| 15 | I2C1SDA | I2C |
| 16 | I2S1WS | GPIO |
| 17 | I2C1SCL | I2C |
| 18 | I2S1CLK | GPIO |
| 19 | I2C2SDA | I2C |
| 20 | I2S1MCL | GPIO |
| 21 | I2C2SCL | I2CO |
| 22 | UART1TX | UART |
| 23 | I2S4SDO | NONE |
| 24 | UART1RX | UART |
| 25 | I2S4SDI | NONE |
| 26 | PWM0 | GPIO PWM |
| 27 | I2S4BLK | GPIO |
| 28 | PWM1 | GPIO PWM |
| 29 | I2S4WS | NONE |
| 30 | PWM2 | GPIO PWM |
| 31 | I2S3SDO | NONE |
| 32 | PWM3 | GPIO PWM |
| 33 | I2S3SDI | NONE |
| 34 | 1.8V | NONE |
| 35 | I2S4BLK | GPIO |
| 36 | GND | NONE |
| 37 | GND | NONE |
| 38 | GND | NONE |
| 39 | GND | NONE |
| 40 | 3.3V | NONE |
| 41 | GND | NONE |
| 42 | 5V | NONE |
| 43 | GND | NONE |
| 44 | 5V | NONE |
| 45 | GND | NONE |
| 46 | 3.3V | NONE |
| 47 | GND | NONE |
| 48 | 3.3V | NONE |
| 49 | GND | NONE |
| 50 | 1.8V | NONE |
| 51 | GPIO | GPIO |
| 52 | 1.8V | NONE |
| 53 | PANEL | GPIO |
| 54 | GND | NONE |
| 55 | PANEL | GPIO |
| 56 | CAMERA | NONE |
| 57 | PANEL | GPIO |
| 58 | CAMERA | NONE |
| 59 | SPP0FS0 | GPIO |
| 60 | CAMERA | NONE |
| 61 | SPP0FS1 | GPIO |
| 62 | SPI_DAT | SPI |
| 63 | SPP0FS2 | GPIO |
| 64 | SPICLKB | GPIO SPI |
| 65 | SPP0FS3 | GPIO |
| 66 | SPICLKA | GPIO SPI |
| 67 | SPP0TX | GPIO |
| 68 | UART0RX | GPIO UART |
| 69 | SPP0RX | GPIO |
| 70 | UART0RT | GPIO UART |
| 71 | I2C1SDA | GPIO I2C |
| 72 | UART0CT | GPIO UART |
| 73 | I2C1SCL | GPIO I2C |
| 74 | UART1TX | GPIO UART |
| 75 | I2C2SDA | GPIO I2C |
| 76 | UART1RX | GPIO UART |
| 77 | I2C1SCL | GPIO I2C |
| 78 | UART1RT | GPIO UART |
| 79 | RTC_CLK | GPIO |
| 80 | UART1CT | GPIO UART |
| 100 | LED100 | GPIO |
| 101 | LED101 | GPIO |
| 102 | LED102 | GPIO |
| 103 | LED103 | GPIO |
| 104 | LEDWIFI | GPIO |
| 105 | LEDBT | GPIO |
To see a live pin mapping use the command: $ mraa-gpio list