src/cwlsxxa/pyupm_cwlsxxa.i

// Include doxygen-generated documentation
%include "pyupm_doxy2swig.i"
%module pyupm_cwlsxxa
%include "../upm.i"
%include "std_string.i"

%{
    #include "cwlsxxa.hpp"
%}
%include "cwlsxxa.hpp"
cwlsxxa: Initial implementation The driver was developed using the Veris CWLSHTA CO2 Gas sensor. The 'T' variant supports a temperature sensor, and the 'H' variant supports a humidity sensor. All 3 signals are provided by the device as analog 0-5Vdc, 0-10Vdc, or 4-20ma loop current outputs. For devices supporting temperature, the valid temperature range is 10C to 50C. The humidity ranges from 0% to 100% (non-condensing). The CO2 sensor ranges from 0 to 2000 ppm. This driver was developed using the 5Vdc outputs and the 4-20ma outputs. For voltage outputs, your MCU must be configured for 5V operation. In addition, you must configure the sensor (via it's configuration switches) to output 0-5VDC only. Using any other analog reference voltage will require the appropriate external circuitry (such as a voltage divider) in order to interface safely with your MCU. In addition, the sensor can be configured for 4-20ma usage, by specifying the correct receiver resistance (in ohms) in the constructor. This sensor was tested with a Cooking Hacks (Libelium) 4-channel 4-20ma Arduino interface shield. For this interface, the receiver resistance was specified as 165.0 ohms. Signed-off-by: Jon Trulson <jtrulson@ics.com> Signed-off-by: Abhishek Malik <abhishek.malik@intel.com> 2016-02-19 17:58:44 -07:00			`// Include doxygen-generated documentation`
			`%include "pyupm_doxy2swig.i"`
			`%module pyupm_cwlsxxa`
			`%include "../upm.i"`
			`%include "std_string.i"`

			`%{`
cpp_headers: Renamed C++ headers from .h -> .hpp To make room for UPM C and C++ sensor code to coexist, all UPM C++ headers have been renamed from h -> hpp. This commit contains updates to documentation, includes, cmake collateral, examples, and swig interface files. * Renamed all cxx/cpp header files which contain the string 'copyright intel' from .h -> .hpp (if not already hpp). * Replaced all references to .h with .hpp in documentation, source files, cmake collateral, example code, and swig interface files. * Replaced cmake variable module_h with module_hpp. * Intentionally left upm.h since this file currently does not contain code (documentation only). Signed-off-by: Noel Eck <noel.eck@intel.com> 2016-04-25 14:27:51 -07:00			`#include "cwlsxxa.hpp"`
cwlsxxa: Initial implementation The driver was developed using the Veris CWLSHTA CO2 Gas sensor. The 'T' variant supports a temperature sensor, and the 'H' variant supports a humidity sensor. All 3 signals are provided by the device as analog 0-5Vdc, 0-10Vdc, or 4-20ma loop current outputs. For devices supporting temperature, the valid temperature range is 10C to 50C. The humidity ranges from 0% to 100% (non-condensing). The CO2 sensor ranges from 0 to 2000 ppm. This driver was developed using the 5Vdc outputs and the 4-20ma outputs. For voltage outputs, your MCU must be configured for 5V operation. In addition, you must configure the sensor (via it's configuration switches) to output 0-5VDC only. Using any other analog reference voltage will require the appropriate external circuitry (such as a voltage divider) in order to interface safely with your MCU. In addition, the sensor can be configured for 4-20ma usage, by specifying the correct receiver resistance (in ohms) in the constructor. This sensor was tested with a Cooking Hacks (Libelium) 4-channel 4-20ma Arduino interface shield. For this interface, the receiver resistance was specified as 165.0 ohms. Signed-off-by: Jon Trulson <jtrulson@ics.com> Signed-off-by: Abhishek Malik <abhishek.malik@intel.com> 2016-02-19 17:58:44 -07:00			`%}`
cpp_headers: Renamed C++ headers from .h -> .hpp To make room for UPM C and C++ sensor code to coexist, all UPM C++ headers have been renamed from h -> hpp. This commit contains updates to documentation, includes, cmake collateral, examples, and swig interface files. * Renamed all cxx/cpp header files which contain the string 'copyright intel' from .h -> .hpp (if not already hpp). * Replaced all references to .h with .hpp in documentation, source files, cmake collateral, example code, and swig interface files. * Replaced cmake variable module_h with module_hpp. * Intentionally left upm.h since this file currently does not contain code (documentation only). Signed-off-by: Noel Eck <noel.eck@intel.com> 2016-04-25 14:27:51 -07:00			`%include "cwlsxxa.hpp"`
cwlsxxa: Initial implementation The driver was developed using the Veris CWLSHTA CO2 Gas sensor. The 'T' variant supports a temperature sensor, and the 'H' variant supports a humidity sensor. All 3 signals are provided by the device as analog 0-5Vdc, 0-10Vdc, or 4-20ma loop current outputs. For devices supporting temperature, the valid temperature range is 10C to 50C. The humidity ranges from 0% to 100% (non-condensing). The CO2 sensor ranges from 0 to 2000 ppm. This driver was developed using the 5Vdc outputs and the 4-20ma outputs. For voltage outputs, your MCU must be configured for 5V operation. In addition, you must configure the sensor (via it's configuration switches) to output 0-5VDC only. Using any other analog reference voltage will require the appropriate external circuitry (such as a voltage divider) in order to interface safely with your MCU. In addition, the sensor can be configured for 4-20ma usage, by specifying the correct receiver resistance (in ohms) in the constructor. This sensor was tested with a Cooking Hacks (Libelium) 4-channel 4-20ma Arduino interface shield. For this interface, the receiver resistance was specified as 165.0 ohms. Signed-off-by: Jon Trulson <jtrulson@ics.com> Signed-off-by: Abhishek Malik <abhishek.malik@intel.com> 2016-02-19 17:58:44 -07:00