src/e50hx/CMakeLists.txt

if (BACNET_FOUND)
  set (libname "e50hx")
  set (libdescription "Module for the Veris E50HX (E50H2/E50H5)Energy Meters")
  set (module_src ${libname}.cxx)
  set (module_hpp ${libname}.hpp)

  upm_module_init(bacnetmstp)
endif ()
e50hx: Initial implementation This driver requires the UPM BACNETMSTP driver (PR #385) to be merged first. This module implements support for the Veris E50H2 and E50H5 BACnet Energy Meters. From the datasheet: The E50H5 BACnet MS/TP DIN Rail Meter with Data Logging combines exceptional performance and easy installation to deliver a cost-effective solution for power monitoring applications. Native serial communication via BACnet MS/TP provides complete accessibility of all measurements to your Building Automation System. The data logging capability protects data in the event of a power failure. The E50H5 can be easily installed on standard DIN rail, surface mounted or contained in an optional NEMA 4 enclosure, as needed. The front-panel LCD display makes device installation and setup easy and provides local access to the full set of detailed measurements. This module was developed using the upm::BACNETMSTP module, based on libbacnet-stack 0.8.3. Both libbacnet 0.8.3 and the upm::BACNETMSTP libraries must be present in order to build this module. This driver was developed on the E50H5. The Trend Log functionality is not currently supported. The Binary Input Objects are also not supported as these are only used for the Alarm bits which are already available from Analog Input Object 52 as an alarm bitfield incorporating all of the supported alarm indicators. It was connected using an RS232->RS485 interface. You cannot use the built in MCU TTL UART pins for accessing this device -- you must use a full Serial RS232->RS485 or USB-RS485 interface connected via USB. Signed-off-by: Jon Trulson <jtrulson@ics.com> Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com> 2016-04-01 17:29:48 -06:00			`if (BACNET_FOUND)`
cmake: Dependency refactoring for includes and libs This commit attempts to use a more cmake-friendly approach when handling inter-target dependencies. A combination of macros and include_directories usage provided overzealous compile -I/blah entries which equates to large catch-all build commands. For example, the last CXX target contains include directories for nearly all preceeding targets (~190). Library dependencies were also often wrong or missing. * Removed nearly all used of include_directories (swig cmake commands still appear to need these for generating the swig command line) * Updated usage of target_link_libraries in upm_module_init, also changed to using target_include_directories per target. This greatly simplifies upm/mixed_module_init usage for libraries which depend on other libraries (in this project). example (src/tb7300/CMakeLists.txt) old: # upm-libbacnetmstp will bring in libbacnet, I hope set (reqlibname "upm-bacnetmstp") include_directories(${BACNET_INCLUDE_DIRS}) include_directories("../bacnetmstp") upm_module_init() upm_target_link_libraries(${libname} bacnetmstp) new: upm_module_init(bacnetmstp) The reason here, is that tb7300 depends on bacnetmstp, which depends on BACNET includes/libs, so tb7300 gets the headers and libraries transitively via its dependency on bacnetmstp. * Updated pkg-config .pc file generation flow to reflect changes with dependencies. * Create a real target for the interfaces (CXX abstract sensor classes). Renamed the directory from 'upm/src/upm' to 'upm/src/interfaces' Also changed the install location of the interface headers to include/upm/interfaces. Updated interface header usage to reflect this. * Updated a few sensor libs to use fwd declarations for mraa. Ideally the UPM libs would do more of this which eases the burden on anyone building on top of the sensor libraries since they would not need to know about mraa headers. * Fixed examples which use symbols not defined in local includes Signed-off-by: Noel Eck <noel.eck@intel.com> 2017-01-30 18:14:48 -08:00			`set (libname "e50hx")`
			`set (libdescription "Module for the Veris E50HX (E50H2/E50H5)Energy Meters")`
			`set (module_src ${libname}.cxx)`
			`set (module_hpp ${libname}.hpp)`

			`upm_module_init(bacnetmstp)`
e50hx: Initial implementation This driver requires the UPM BACNETMSTP driver (PR #385) to be merged first. This module implements support for the Veris E50H2 and E50H5 BACnet Energy Meters. From the datasheet: The E50H5 BACnet MS/TP DIN Rail Meter with Data Logging combines exceptional performance and easy installation to deliver a cost-effective solution for power monitoring applications. Native serial communication via BACnet MS/TP provides complete accessibility of all measurements to your Building Automation System. The data logging capability protects data in the event of a power failure. The E50H5 can be easily installed on standard DIN rail, surface mounted or contained in an optional NEMA 4 enclosure, as needed. The front-panel LCD display makes device installation and setup easy and provides local access to the full set of detailed measurements. This module was developed using the upm::BACNETMSTP module, based on libbacnet-stack 0.8.3. Both libbacnet 0.8.3 and the upm::BACNETMSTP libraries must be present in order to build this module. This driver was developed on the E50H5. The Trend Log functionality is not currently supported. The Binary Input Objects are also not supported as these are only used for the Alarm bits which are already available from Analog Input Object 52 as an alarm bitfield incorporating all of the supported alarm indicators. It was connected using an RS232->RS485 interface. You cannot use the built in MCU TTL UART pins for accessing this device -- you must use a full Serial RS232->RS485 or USB-RS485 interface connected via USB. Signed-off-by: Jon Trulson <jtrulson@ics.com> Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com> 2016-04-01 17:29:48 -06:00			`endif ()`