src/tb7300/CMakeLists.txt

if (BACNET_FOUND)
  set (libname "tb7300")
  set (libdescription "Module for the TB7300 Fan Coil Thermostat")
  set (module_src ${libname}.cxx)
  set (module_hpp ${libname}.hpp)

  upm_module_init(bacnetmstp)
endif ()
tb7300: Initial implementation This module implements support for the Honeywell TB7300 Communicating Fan Coil Thermostat. It may also support the TB7200, though only the TB7300 was available for development of this driver. The TB7200 Series PI thermostats are designed for zoning applications, and the TB7300 Series PI thermostats are designed for fan coil control. Both Series are communicating thermostats with models available in BACnet® MS/TP protocol and can be easily integrated into a WEBs-AX building automation system based on the NiagaraAX® platform. TB7200 and TB7300 Series thermostats are compatible with the Honeywell Occupancy Sensor Cover. Thermostats equipped with an occupancy sensor cover provide advanced active occupancy logic, which will automatically switch occupancy levels from Occupied to Stand-By and Unoccupied as required by local activity being present or not. This advanced occupancy functionality provides advantageous energy savings during occupied hours without sacrificing occupant comfort. All thermostats can be ordered with or without a factory installed PIR cover. Signed-off-by: Jon Trulson <jtrulson@ics.com> 2016-06-10 13:05:46 -06:00			`if (BACNET_FOUND)`
cmake: Dependency refactoring for includes and libs This commit attempts to use a more cmake-friendly approach when handling inter-target dependencies. A combination of macros and include_directories usage provided overzealous compile -I/blah entries which equates to large catch-all build commands. For example, the last CXX target contains include directories for nearly all preceeding targets (~190). Library dependencies were also often wrong or missing. * Removed nearly all used of include_directories (swig cmake commands still appear to need these for generating the swig command line) * Updated usage of target_link_libraries in upm_module_init, also changed to using target_include_directories per target. This greatly simplifies upm/mixed_module_init usage for libraries which depend on other libraries (in this project). example (src/tb7300/CMakeLists.txt) old: # upm-libbacnetmstp will bring in libbacnet, I hope set (reqlibname "upm-bacnetmstp") include_directories(${BACNET_INCLUDE_DIRS}) include_directories("../bacnetmstp") upm_module_init() upm_target_link_libraries(${libname} bacnetmstp) new: upm_module_init(bacnetmstp) The reason here, is that tb7300 depends on bacnetmstp, which depends on BACNET includes/libs, so tb7300 gets the headers and libraries transitively via its dependency on bacnetmstp. * Updated pkg-config .pc file generation flow to reflect changes with dependencies. * Create a real target for the interfaces (CXX abstract sensor classes). Renamed the directory from 'upm/src/upm' to 'upm/src/interfaces' Also changed the install location of the interface headers to include/upm/interfaces. Updated interface header usage to reflect this. * Updated a few sensor libs to use fwd declarations for mraa. Ideally the UPM libs would do more of this which eases the burden on anyone building on top of the sensor libraries since they would not need to know about mraa headers. * Fixed examples which use symbols not defined in local includes Signed-off-by: Noel Eck <noel.eck@intel.com> 2017-01-30 18:14:48 -08:00			`set (libname "tb7300")`
			`set (libdescription "Module for the TB7300 Fan Coil Thermostat")`
			`set (module_src ${libname}.cxx)`
			`set (module_hpp ${libname}.hpp)`

			`upm_module_init(bacnetmstp)`
tb7300: Initial implementation This module implements support for the Honeywell TB7300 Communicating Fan Coil Thermostat. It may also support the TB7200, though only the TB7300 was available for development of this driver. The TB7200 Series PI thermostats are designed for zoning applications, and the TB7300 Series PI thermostats are designed for fan coil control. Both Series are communicating thermostats with models available in BACnet® MS/TP protocol and can be easily integrated into a WEBs-AX building automation system based on the NiagaraAX® platform. TB7200 and TB7300 Series thermostats are compatible with the Honeywell Occupancy Sensor Cover. Thermostats equipped with an occupancy sensor cover provide advanced active occupancy logic, which will automatically switch occupancy levels from Occupied to Stand-By and Unoccupied as required by local activity being present or not. This advanced occupancy functionality provides advantageous energy savings during occupied hours without sacrificing occupant comfort. All thermostats can be ordered with or without a factory installed PIR cover. Signed-off-by: Jon Trulson <jtrulson@ics.com> 2016-06-10 13:05:46 -06:00			`endif ()`