Raspberries/upm
Public Access
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

zfm20: Initial implementation

Browse Source 
This driver implements support for the ZFM20 fingerprint module.  It
was tested on a Grove Fingerprint Sensor.

Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Zion Orent <zorent@ics.com>
Signed-off-by: John Van Drasek <john.r.van.drasek@intel.com>
This commit is contained in:
Jon Trulson
2015-03-30 18:02:08 -06:00
committed by John Van Drasek
parent bdaf952e91
commit 8bf92be1ab
12 changed files with 1818 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

377
src/zfm20/zfm20.h Normal file
View File

@@ -0,0 +1,377 @@
/*
* Author: Jon Trulson <jtrulson@ics.com>
* Copyright (c) 2015 Intel Corporation.
*
* Thanks to Adafruit for supplying a google translated version of the
* Chinese datasheet and some clues in their code.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
* LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
* OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#pragma once
#include <string>
#include <iostream>
#include <stdint.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
#include <errno.h>
#include <termios.h>
#include <sys/time.h>
#include <sys/select.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <mraa/uart.h>
#define ZFM20_DEFAULT_UART 0
// protocol start codes
#define ZFM20_START1 0xef
#define ZFM20_START2 0x01
#define ZFM20_MAX_PKT_LEN 256
#define ZFM20_TIMEOUT 5000 // in ms
#define ZFM20_DEFAULT_PASSWORD 0x00000000
#define ZFM20_DEFAULT_ADDRESS 0xffffffff
namespace upm {
/**
* @brief UPM library for the ZFM-20 fingerprint sensor module
* @defgroup zfm20 libupm-zfm20
* @ingroup seeed serial gas
*/
/**
* @sensor zfm20
* @library zfm20
* @comname ZFM-20 Fingerprint Sensor Module
* @category other
* @manufacturer seeed
* @connection uart
*
* @brief C++ API for the ZFM-20 fingerprint sensor module
*
* This class was tested on the Grove Fingerprint Sensor
* Module. It can store up to 163 fingerprints.
*
* It is connected via a UART at 57600 baud.
*
* This example demonstrates how to register and store a new fingerprint
* @snippet zfm20-register.cxx Interesting
* This example demonstrates reading a fingerprint and locating it in the DB
* @snippet zfm20.cxx Interesting
*/
class ZFM20 {
public:
// commands
typedef enum {
CMD_GEN_IMAGE = 0x01,
CMD_IMG2TZ = 0x02,
CMD_MATCH = 0x03,
CMD_SEARCH = 0x04,
CMD_REGMODEL = 0x05,
CMD_STORE = 0x06,
CMD_LOAD_TMPL = 0x07,
CMD_UPLOAD_TMPL = 0x08,
CMD_DOWNLOAD_TMPL = 0x09,
CMD_UPLOAD_IMAGE = 0x0a,
CMD_DOWNLOAD_IMAGE = 0x0b,
CMD_DELETE_TMPL = 0x0c,
CMD_EMPTYDB = 0x0d,
CMD_SET_SYSPARAMS = 0x0e,
CMD_GET_SYSPARAMS = 0x0f,
CMD_SET_PASSWORD = 0x12,
CMD_VERIFY_PASSWORD = 0x13,
CMD_GET_RANDOM_NUMBER = 0x14,
CMD_SET_ADDRESS = 0x15,
CMD_GET_TMPL_COUNT = 0x1d,
CMD_GET_INDEX_TABLE = 0x1f
} ZFM20_COMMAND_T;
// Error response codes
typedef enum {
ERR_OK = 0x00,
ERR_PACKET_RX_ERROR = 0x01,
ERR_NO_FINGER = 0x02,
ERR_FP_IMAGE_FAILED = 0x03,
ERR_FP_TOO_MESSY = 0x06,
ERR_FP_IMAGE_FEW_FEATURES = 0x07,
ERR_FP_NOMATCH = 0x08,
ERR_FP_NOTFOUND = 0x09,
ERR_FP_ENROLLMISMATCH = 0x0a,
ERR_BAD_LOCATION = 0x0b,
ERR_DB_ERROR = 0x0c,
ERR_UPLOAD_FEAT_FAILED = 0x0d,
ERR_NO_MORE_PACKETS = 0x0e,
ERR_UPLOAD_IMG_FAILED = 0x0f,
ERR_RM_TMPL_FAILED = 0x10,
ERR_EMPTY_DB_FAILED = 0x11,
ERR_INVALID_PWD = 0x13,
ERR_INVALID_IMAGE = 0x15,
ERR_RW_FLASH_ERROR = 0x18,
ERR_INVALID_REG = 0x1a,
ERR_INVALID_ADDR = 0x20,
ERR_NEEDS_PWD = 0x21,
// end of module specific errors
ERR_INTERNAL_ERR = 0xff // API internal error
} ZFM20_ERRORS_T;
typedef enum {
PKT_COMMAND = 0x01,
PKT_DATA = 0x02,
PKT_ACK = 0x07,
PKT_END_DATA = 0x08
} ZFM20_PKTCODES_T;
/**
* ZFM20 module constructor
*
* @param uart default uart to use (0 or 1)
*/
ZFM20(int uart);
/**
* ZFM20 module Destructor
*/
~ZFM20();
/**
* check to see if there is data available for reading
*
* @param millis number of milliseconds to wait, 0 means no wait.
* @return true if there is data available to be read
*/
bool dataAvailable(unsigned int millis);
/**
* read any available data into a user-supplied buffer. Note, the
* call will block until data is available to be read. Use
* dataAvailable() to determine whether there is data available
* beforehand, to avoid blocking.
*
* @param buffer the buffer to hold the data read
* @param len the length of the buffer
* @return the number of bytes read
*/
int readData(char *buffer, size_t len);
/**
* write the data in buffer to the device
*
* @param buffer the buffer to hold the data read
* @param len the length of the buffer
* @return the number of bytes written
*/
int writeData(char *buffer, size_t len);
/**
* setup the proper tty i/o modes and the baudrate. The default
* baud rate is 57600 (B57600) for this device.
*
* @param baud the desired baud rate.
* @return true if successful
*/
bool setupTty(speed_t baud=B57600);
/**
* compose and write a command packet
*
* @param pkt the packet
* @param len length of packet
* @return the number of bytes written
*/
int writeCmdPacket(unsigned char *pkt, int len);
/**
* verify the packet header and indicate it's validity
*
* @param pkt the packet to check
* @return true if valid checksum, false otherwise
*/
bool verifyPacket(unsigned char *pkt);
/**
* Return the number of milliseconds elapsed since initClock()
* was last called.
*
* @return elapsed milliseconds
*/
uint32_t getMillis();
/**
* Reset the Clock
*
*/
void initClock();
/**
* set the address that should be used to access the module
*
* @param addr the address to use
*/
void setAddress(uint32_t addr) { m_address = addr; };
/**
* set the password that should be used to access the module
*
* @param pw password to use
*/
void setPassword(uint32_t pw) { m_password = pw; };
/**
* get the returned data from a request
*
* @param pkt the buffer to store the returned data into
* @param len the expected response length. pkt should be at least this
* big.
* @return true if successful
*/
bool getResponse(unsigned char *pkt, int len);
/**
* verify and authenticate to the module. The password used is
* the one last set by setPassword().
*
* @return true if successful
*/
bool verifyPassword();
/**
* query the module for the number of stored templates
* (fingerprints).
*
* @return the number of currently stored templates
*/
int getNumTemplates();
/**
* set a new password for the module. This passowrd will be
* stored on the module, and will be required in order to access
* the module in the future.
*
* @param pwd the new password to set on the module
* @return true if successful
*/
bool setNewPassword(uint32_t pwd);
/**
* set a new address for the module. This address will be
* stored on the module, and will be required in order to access
* the module in the future.
*
* @param addr the new address to set on the module
* @return true if successful
*/
bool setNewAddress(uint32_t addr);
/**
* generate a new fingerprint image (scan a fingerprint)
*
* @return one of the ZFM20_ERRORS_T values
*/
uint8_t generateImage();
/**
* convert the image in the image buffer (generated by
* generateImage()) and store it in one of the two characteristics
* buffers, 1 or 2
*
* @param slot the characteristics buffer to use. Must be 1 or 2.
* @return one of the ZFM20_ERRORS_T values
*/
uint8_t image2Tz(int slot);
/**
* based on the two characteristics bufferes (1 & 2), create a
* fingerprint model. Once a model has been successfully created,
* it can be stored in the module with storeModel().
*
* @return one of the ZFM20_ERRORS_T values
*/
uint8_t createModel();
/**
* once a fingerprint model has been created, this method can be
* used to store it (via one of the characteristics buffers) in a
* given location.
*
* @param slot the characteristics buffer to store (1 or 2)
* @param id the location in which to store the model
* @return one of the ZFM20_ERRORS_T values
*/
uint8_t storeModel(int slot, uint16_t id);
/**
* delete a stored model.
*
* @param id the location containing the model to delete
* @return one of the ZFM20_ERRORS_T values
*/
uint8_t deleteModel(uint16_t id);
/**
* delete the model database
*
* @return one of the ZFM20_ERRORS_T values
*/
uint8_t deleteDB();
/**
* search the fingerprint DB and return the id and score, if found
*
*
* @param slot the slot containing a converted image to search for
* @param id the returned id if found, 0 otherwise
* @param score the returned score if found, 0 otherwise
* @return one of the ZFM20_ERRORS_T values
*/
uint8_t search(int slot, uint16_t *id, uint16_t *score);
/**
* compares the features in characteristic buffers 1 and 2 and
* returns a score if they match
*
* @param score the returned score
* @return one of the ZFM20_ERRORS_T values
*/
uint8_t match(uint16_t *score);
protected:
int ttyFd() { return m_ttyFd; };
int setTtyFd(int fd) { m_ttyFd = fd; };
private:
mraa_uart_context m_uart;
int m_ttyFd;
uint32_t m_password;
uint32_t m_address;
struct timeval m_startTime;
};
}