/*
 * Author: Jon Trulson <jtrulson@ics.com>
 * Copyright (c) 2016-2017 Intel Corporation.
 *
 * The MIT License
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */
#pragma once

#include <string>
#include <vector>

#include <mraa/gpio.hpp>
#include "bma250e.h"

namespace upm {

    /**
     * @brief Bosch 3-axis Accelerometer
     * @defgroup bma250e libupm-bma250e
     * @ingroup i2c spi gpio bosch accelerometer
     */

    /**
     * @library bma250e
     * @sensor bma250e
     * @comname Digital Triaxial Acceleration Sensor
     * @type accelerometer
     * @man bosch
     * @con i2c spi gpio
     * @web https://www.bosch-sensortec.com/bst/products/all_products/bma250e
     *
     * @brief API for the BMA250E 10 bit Triaxial Accelerometer
     *
     * The BMA250E is a triaxial, low-g acceleration sensor with digital
     * output for consumer applications. It allows measurements of
     * acceleration in three perpendicular axes. An evaluation circuitry
     * (ASIC) converts the output of a micromechanical
     * acceleration-sensing structure (MEMS) that works according to the
     * differential capacitance principle.
     *
     * Not all functionality of this chip has been implemented in this
     * driver, however all the pieces are present to add any desired
     * functionality.  This driver supports both I2C (default) and SPI
     * operation.
     *
     * This driver attempts to support verious flavors of this chip,
     * such as the version on the BMX050, BMI050 (chipid 0xfa) and the
     * version on the bmc050 (chipid 0x03).  Not all functionality is
     * appropriate, or even present on all chips.  Consult the relevant
     * datasheets.
     *
     * This device requires 3.3v operation.
     *
     * @snippet bma250e.cxx Interesting
     */

    class BMA250E {
    public:

        /**
         * BMA250E constructor.
         *
         * This device can support both I2C and SPI. For SPI, set the addr
         * to -1, and specify a positive integer representing the Chip
         * Select (CS) pin for the cs argument.  If you are using a
         * hardware CS pin (like edison with arduino breakout), then you
         * can connect the proper pin to the hardware CS pin on your MCU
         * and supply -1 for cs.  The default operating mode is I2C.
         *
         * @param bus I2C or SPI bus to use.
         * @param addr The address for this device.  -1 for SPI.
         * @param cs The gpio pin to use for the SPI Chip Select.  -1 for
         * I2C or for SPI with a hardware controlled pin.
         * @throws std::runtime_error on initialization failure.
         */
        BMA250E(int bus=BMA250E_DEFAULT_I2C_BUS,
                int addr=BMA250E_DEFAULT_ADDR,
                int cs=-1);

        /**
         * BMA250E Destructor.
         */
        ~BMA250E();

        /**
         * Update the internal stored values from sensor data.
         *
         * @throws std::runtime_error on failure.
         */
        void update();

        /**
         * Return the chip ID.
         *
         * @return The chip ID.
         */
        uint8_t getChipID();

        /**
         * Return accelerometer data in gravities.  update() must have
         * been called prior to calling this method.
         *
         * @param x Pointer to a floating point value that will have the
         * current x component placed into it.
         * @param y Pointer to a floating point value that will have the
         * current y component placed into it.
         * @param z Pointer to a floating point value that will have the
         * current z component placed into it.
         */
        void getAccelerometer(float *x, float *y, float *z);

        /**
         * Return accelerometer data in gravities in the form of a
         * floating point vector.  update() must have been called
         * prior to calling this method.
         *
         * @return A floating point vector containing x, y, and z in
         * that order.
         */
        std::vector<float> getAccelerometer();

        /**
         * Return the current measured temperature.  Note, this is not
         * ambient temperature.  update() must have been called prior to
         * calling this method.
         *
         * @param fahrenheit true to return data in Fahrenheit, false for
         * Celicus.  Celsius is the default.
         * @return The temperature in degrees Celsius or Fahrenheit.
         */
        float getTemperature(bool fahrenheit=false);

        /**
         * Initialize the device and start operation.  This function is
         * called from the constructor so will not typically need to be
         * called by a user unless the device is reset.
         *
         * @param pwr One of the BMA250E_POWER_MODE_T values.  The default is
         * BMA250E_POWER_MODE_NORMAL.
         * @param range One of the BMA250E_RANGE_T values.  The default is
         * BMA250E_RANGE_2G.
         * @param bw One of the filtering BMA250E_BW_T values.  The default is
         * BMA250E_BW_250.
         * @throws std::runtime_error on failure.
         */
        void init(BMA250E_POWER_MODE_T pwr=BMA250E_POWER_MODE_NORMAL,
                  BMA250E_RANGE_T range=BMA250E_RANGE_2G,
                  BMA250E_BW_T bw=BMA250E_BW_250);

        /**
         * Reset the device as if during a power on reset.  All configured
         * values are lost when this happens.  You should call init()
         * afterwards, or at least perform the same initialization init()
         * does before continuing.
         *
         * @throws std::runtime_error on failure.
         */
        void reset();

        /**
         * Set the acceleration scaling range.  This device supports 2, 4,
         * 8, and 16g ranges.
         *
         * @param range One of the BMA250E_RANGE_T values.
         * @throws std::runtime_error on failure.
         */
        void setRange(BMA250E_RANGE_T range);

        /**
         * Set the output filtering bandwidth of the device.
         *
         * @param bw One of the BMA250E_BW_T values.
         * @throws std::runtime_error on failure.
         */
        void setBandwidth(BMA250E_BW_T bw);

        /**
         * Set the power mode of the device.  Care must be taken when
         * setting a low power or suspend mode.  By default init() calls
         * setLowPowerMode2() to ensure that if any of these modes are
         * entered we can still talk to the device.  The default low power
         * mode is LPM1, which requires slowing down register writes,
         * which we cannot support.  setLowPowerMode2() enables LPM2 which
         * keeps the digital interface operational in low power or suspend
         * modes.  See the datasheet for details.
         *
         * So if you reset your device and don't call init() or
         * setLowPowerMode2(), you could lose control of the device by
         * calling this function with anything other than
         * POWER_MODE_NORMAL.  You've been warned :)
         *
         * @param power One of the BMA250E_POWER_MODE_T values.
         * @throws std::runtime_error on failure.
         */
        void setPowerMode(BMA250E_POWER_MODE_T power);

        /**
         * Enable update() to read from the FIFO rather than the
         * acceleration axis registers directly.  init() enables this mode
         * by default if the chip variant supports a FIFO.  An advantage
         * to this mode that all axis data is sampled from the same
         * timeslice.  When reading directly from the acceleration output
         * registers, it's possible for one axis to be updated while
         * another is being read, causing a temporal anomaly that even
         * Captain Picard can't resolve.  If there is no FIFO present,
         * this call is ignored.
         *
         * Using the FIFO removes this problem.
         *
         * @param useFIFO True to enable update() to read from the FIFO.
         * When false, update will read from the acceleration output
         * registers directly.
         */
        void enableFIFO(bool useFIFO);

        /**
         * Set the FIFO watermark.  When the watermark is reached an
         * interrupt (if enabled) will be generated.  If there is no FIFO
         * present, this call is ignored.
         *
         * @param wm The FIFO watermark to use.  The maximum value is 63.
         * @throws std::runtime_error on failure.
         */
        void fifoSetWatermark(int wm);

        /**
         * Set the FIFO configuration.  init() uses the FIFO_MODE_BYPASS
         * mode with axes set to FIFO_DATA_SEL_XYZ by default.  If there
         * is no FIFO present, this call is ignored.
         *
         * @param mode One of the BMA250E_FIFO_MODE_T values.
         * @param axes One of the BMA250E_FIFO_DATA_SEL_T values.
         * @throws std::runtime_error on failure.
         */
        void fifoConfig(BMA250E_FIFO_MODE_T mode,
                        BMA250E_FIFO_DATA_SEL_T axes);

        /**
         * Enable, disable, and configure the built in self test on a per
         * axis basis.  See the datasheet for details.
         *
         * @param sign True for a positive deflection, false for negative
         * @param amp True for a high deflection, false for a low deflection
         * @param axis One of the BMA250E_SELFTTEST_AXIS_T values.
         * Note, only one axis at a time can be tested.  Accelerometer
         * output for other axes should be ignored.
         * @throws std::runtime_error on failure.
         */
        void setSelfTest(bool sign, bool amp, BMA250E_SELFTTEST_AXIS_T axis);

        /**
         * Return the Interrupt Enables 0 register.  These registers
         * allow you to enable various interrupt conditions.  See the
         * datasheet for details.
         *
         * @return A bitmask of BMA250E_INT_EN_0_BITS_T bits.
         */
        uint8_t getInterruptEnable0();

        /**
         * Set the Interrupt Enables 0 register.  See the datasheet for
         * details.
         *
         * @param bits A bitmask of BMA250E_INT_EN_0_BITS_T bits.
         * @throws std::runtime_error on failure.
         */
        void setInterruptEnable0(uint8_t bits);

        /**
         * Return the Interrupt Enables 1 register.  See the datasheet for
         * details.
         *
         * @return A bitmask of BMA250E_INT_EN_1_BITS_T bits.
         */
        uint8_t getInterruptEnable1();

        /**
         * Set the Interrupt Enables 1 register.  See the datasheet for
         * details.
         *
         * @param bits A bitmask of BMA250E_INT_EN_1_BITS_T bits.
         * @throws std::runtime_error on failure.
         */
        void setInterruptEnable1(uint8_t bits);

        /**
         * Return the Interrupt Enables 2 register.  See the datasheet for
         * details.
         *
         * @return A bitmask of BMA250E_INT_EN_2_BITS_T bits.
         */
        uint8_t getInterruptEnable2();

        /**
         * Set the Interrupt Enables 2 register.  See the datasheet for
         * details.
         *
         * @param bits A bitmask of BMA250E_INT_EN_2_BITS_T bits.
         * @throws std::runtime_error on failure.
         */
        void setInterruptEnable2(uint8_t bits);

        /**
         * Return the Interrupt Map 0 register.  These registers allow you
         * to map specific interrupts to the interrupt 1 or interrupt 2
         * pin.  See the datasheet for details.
         *
         * @return A bitmask of BMA250E_INT_MAP_0_BITS_T bits.
         */
        uint8_t getInterruptMap0();

        /**
         * Set the Interrupt Map 0 register.  These registers allow you
         * to map specific interrupts to the interrupt 1 or interrupt 2
         * pin.  See the datasheet for details.
         *
         * @param bits A bitmask of BMA250E_INT_MAP_0_BITS_T bits.
         * @throws std::runtime_error on failure.
         */
        void setInterruptMap0(uint8_t bits);

        /**
         * Return the Interrupt Map 1 register.  See the datasheet for
         * details.
         *
         * @return A bitmask of BMA250E_INT_MAP_1_BITS_T bits.
         */
        uint8_t getInterruptMap1();

        /**
         * Set the Interrupt Map 1 register.  See the datasheet for
         * details.
         *
         * @param bits A bitmask of BMA250E_INT_MAP_1_BITS_T bits.
         * @throws std::runtime_error on failure.
         */
        void setInterruptMap1(uint8_t bits);

        /**
         * Return the Interrupt Map 2 register.  See the datasheet for
         * details.
         *
         * @return A bitmask of BMA250E_INT_MAP_2_BITS_T bits.
         */
        uint8_t getInterruptMap2();

        /**
         * Set the Interrupt Map 2 register.  See the datasheet for
         * details.
         *
         * @param bits A bitmask of BMA250E_INT_MAP_2_BITS_T bits.
         * @throws std::runtime_error on failure.
         */
        void setInterruptMap2(uint8_t bits);

        /**
         * Return the Interrupt source register.  This register allows
         * determining where data comes from (filtered/unfiltered) for
         * those interrupt sources where this is selectable.  See the
         * datasheet for details.
         *
         * @return A bitmask of BMA250E_INT_SRC_BITS_T bits.
         */
        uint8_t getInterruptSrc();

        /**
         * Set the Interrupt source register.  This register allows
         * determining where data comes from (filtered/unfiltered) for
         * those interrupt sources where this is selectable.  See the
         * datasheet for details.
         *
         * @param bits A bitmask of BMA250E_INT_SRC_BITS_T bits.
         * @throws std::runtime_error on failure.
         */
        void setInterruptSrc(uint8_t bits);

        /**
         * Return the Interrupt output control register.  This register
         * allows determining the electrical characteristics of the 2
         * interrupt pins (open-drain/push-pull and level/edge
         * triggering).  See the datasheet for details.
         *
         * @return A bitmask of BMA250E_INT_OUT_CTRL_BITS_T bits.
         */
        uint8_t getInterruptOutputControl();

        /**
         * Set the Interrupt output control register.  This register
         * allows determining the electrical characteristics of the 2
         * interrupt pins (open-drain/push-pull and level/edge
         * triggering).  See the datasheet for details.
         *
         * @param bits A bitmask of BMA250E_INT_OUT_CTRL_BITS_T bits.
         * @throws std::runtime_error on failure.
         */
        void setInterruptOutputControl(uint8_t bits);

        /**
         * Clear all latched interrupts.  See the datasheet for details.
         *
         * @throws std::runtime_error on failure.
         */
        void clearInterruptLatches();

        /**
         * Return the current interrupt latching behavior.  See the
         * datasheet for details.
         *
         * @return One of the BMA250E_RST_LATCH_T values.
         */
        BMA250E_RST_LATCH_T getInterruptLatchBehavior();

        /**
         * Set the current interrupt latching behavior.  See the datasheet
         * for details.
         *
         * @param latch One of the BMA250E_RST_LATCH_T values.
         * @throws std::runtime_error on failure.
         */
        void setInterruptLatchBehavior(BMA250E_RST_LATCH_T latch);

        /**
         * Return the interrupt status 0 register.  These registers
         * indicate which interrupts have been triggered.  See the
         * datasheet for details.
         *
         * @return A bitmask of BMA250E_INT_STATUS_0_BITS_T bits.
         */
        uint8_t getInterruptStatus0();

        /**
         * Return the interrupt status 1 register.  See the datasheet for
         * details.
         *
         * @return A bitmask of BMA250E_INT_STATUS_1_BITS_T bits.
         */
        uint8_t getInterruptStatus1();

        /**
         * Return the interrupt status 2 register.  See the datasheet for
         * details.
         *
         * @return A bitmask of BMA250E_INT_STATUS_2_BITS_T bits.
         */
        uint8_t getInterruptStatus2();

        /**
         * Return the interrupt status 3 register bitfields.  See the
         * datasheet for details.  The Orientation value is not returned by
         * this function, see getInterruptStatus3Orientation() for that
         * information.
         *
         * @return A bitmask of BMA250E_INT_STATUS_3_BITS_T bits ONLY.
         */
        uint8_t getInterruptStatus3Bits();

        /**
         * Return the interrupt status 3 register Orientation value.  See the
         * datasheet for details.
         *
         * @return One of the BMA250E_ORIENT_T values.
         */
        BMA250E_ORIENT_T getInterruptStatus3Orientation();

        /**
         * Enable shadowing of the accelerometer output registers.  When
         * enabled, a read of an axis LSB register automatically locks the
         * MSB register of that axis until it has been read.  This is
         * usually a good thing to have enabled.  init() enables this by
         * default.  If disabled, then it becomes possible for part of an
         * axis value to change while another part is being read, causing
         * inconsistent data.
         *
         * @param shadow True to enable axis register shadowing, false
         * otherwise.
         * @throws std::runtime_error on failure.
         */
        void enableRegisterShadowing(bool shadow);

        /**
         * Enable filtering of the accelerometer axis data.  init()
         * enables this by default.  If disabled, then accelerometer data
         * that is read will be raw and unfiltered (rated R).  See the
         * datasheet for details.
         *
         * @param filter True to enable filtering, false to disable.
         * @throws std::runtime_error on failure.
         */
        void enableOutputFiltering(bool filter);

        /**
         * Make sure low power mode config (LPM2) is set in case we later
         * go into the low power or suspend power modes.  LPM1 mode (the
         * default) requires drastically slowed register writes which we
         * cannot handle.
         *
         * @throws std::runtime_error on failure.
         */
        void setLowPowerMode2();


    /**
         * install an interrupt handler.
         *
         * @param intr One of the BMA250E_INTERRUPT_PINS_T values
         * specifying which interrupt pin you are installing.
         * @param gpio GPIO pin to use as interrupt pin.
         * @param level The interrupt trigger level (one of mraa::Edge
         * values).  Make sure that you have configured the interrupt pin
         * properly for whatever level you choose.
         * @param isr The interrupt handler, accepting a void * argument.
         * @param arg The argument to pass the the interrupt handler.
         * @throws std::runtime_error on failure.
         */
        void installISR(BMA250E_INTERRUPT_PINS_T intr, int gpio,
                        mraa::Edge level,
                        void (*isr)(void *), void *arg);

        /**
         * uninstall a previously installed interrupt handler
         *
         * @param intr One of the BMA250E_INTERRUPT_PINS_T values
         * specifying which interrupt pin you are removing.
         */
        void uninstallISR(BMA250E_INTERRUPT_PINS_T intr);

        /**
         * Read a register.
         *
         * @param reg The register to read.
         * @return The value of the register.
         */
        uint8_t readReg(uint8_t reg);

        /**
         * Read contiguous registers into a buffer.
         *
         * @param buffer The buffer to store the results.
         * @param len The number of registers to read.
         * @return The number of bytes read.
         * @throws std::runtime_error on failure.
         */
        int readRegs(uint8_t reg, uint8_t *buffer, int len);

        /**
         * Write to a register.
         *
         * @param reg The register to write to.
         * @param val The value to write.
         * @throws std::runtime_error on failure.
         */
        void writeReg(uint8_t reg, uint8_t val);

    protected:
        bma250e_context m_bma250e;

    private:
        /* Disable implicit copy and assignment operators */
        BMA250E(const BMA250E&) = delete;
        BMA250E &operator=(const BMA250E&) = delete;
        
    };
}