Raspi2-3_GenImage Files · bootstrap.d/15-rpi-config.sh · Collaboration Tremplin des Sciences

Typing errors and changes on README file

vidal - - Load All Authors

Fichier de la dernière révision:

r758:cbd6423e90b0


                r759:7588b4f62cfa

Download file

             15-rpi-config.sh
        
                    334 lines
            
             | 12.9 KiB
            
                | application/x-sh
            
             |
                BashLexer
            
             / bootstrap.d / 15-rpi-config.sh
          
                    Historique
                
                 |
                  Source
                 | Brut
                 |Copy content
                 |Copy permalink

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      #

        vidal
    
Added "4" in comments to indicate tha raspi4 is treated

              r712
            
      # Setup RPi2/3/4 config and cmdline

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      #

      # Load utility functions

      . ./functions.sh

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
      if [ -n "$RPI_FIRMWARE_DIR" ] && [ -d "$RPI_FIRMWARE_DIR" ] ; then

        # Install boot binaries from local directory

        cp "${RPI_FIRMWARE_DIR}"/boot/bootcode.bin "${BOOT_DIR}"/bootcode.bin

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup.dat "${BOOT_DIR}"/fixup.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup_cd.dat "${BOOT_DIR}"/fixup_cd.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup_x.dat "${BOOT_DIR}"/fixup_x.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/start.elf "${BOOT_DIR}"/start.elf

        cp "${RPI_FIRMWARE_DIR}"/boot/start_cd.elf "${BOOT_DIR}"/start_cd.elf

        cp "${RPI_FIRMWARE_DIR}"/boot/start_x.elf "${BOOT_DIR}"/start_x.elf

        vidal
    
proposal to add copy of fixup4*  and start4* from firmware repository...

              r710
            
        cp "${RPI_FIRMWARE_DIR}"/boot/fixup4cd.dat "${BOOT_DIR}"/fixup4cd.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup4.dat "${BOOT_DIR}"/fixup4.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup4db.dat "${BOOT_DIR}"/fixup4db.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup4x.dat "${BOOT_DIR}"/fixup4x.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/start4cd.elf "${BOOT_DIR}"/start4cd.elf

        cp "${RPI_FIRMWARE_DIR}"/boot/start4db.elf "${BOOT_DIR}"/start4db.elf

        vidal
    
Error correction on  start4.elf copies...

              r756
            
        cp "${RPI_FIRMWARE_DIR}"/boot/start4.elf "${BOOT_DIR}"/start4.elf

        vidal
    
proposal to add copy of fixup4*  and start4* from firmware repository...

              r710
            
        cp "${RPI_FIRMWARE_DIR}"/boot/start4x.elf "${BOOT_DIR}"/start4x.elf

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
      else

        # Create temporary directory for boot binaries

        temp_dir=$(as_nobody mktemp -d)

        # Install latest boot binaries from raspberry/firmware github

        as_nobody wget -q -O "${temp_dir}/bootcode.bin" "${FIRMWARE_URL}/bootcode.bin"

        as_nobody wget -q -O "${temp_dir}/fixup.dat" "${FIRMWARE_URL}/fixup.dat"

        as_nobody wget -q -O "${temp_dir}/fixup_cd.dat" "${FIRMWARE_URL}/fixup_cd.dat"

        as_nobody wget -q -O "${temp_dir}/fixup_x.dat" "${FIRMWARE_URL}/fixup_x.dat"

        as_nobody wget -q -O "${temp_dir}/start.elf" "${FIRMWARE_URL}/start.elf"

        as_nobody wget -q -O "${temp_dir}/start_cd.elf" "${FIRMWARE_URL}/start_cd.elf"

        as_nobody wget -q -O "${temp_dir}/start_x.elf" "${FIRMWARE_URL}/start_x.elf"

        vidal
    
proposal to add copy of fixup4*  and start4* from firmware repository...

              r710
            
        as_nobody wget -q -O "${temp_dir}/fixup4cd.dat" "${FIRMWARE_URL}/fixup4cd.dat"

        as_nobody wget -q -O "${temp_dir}/fixup4.dat" "${FIRMWARE_URL}/fixup4.dat"

        as_nobody wget -q -O "${temp_dir}/fixup4db.dat" "${FIRMWARE_URL}/fixup4db.dat"

        as_nobody wget -q -O "${temp_dir}/fixup4x.dat" "${FIRMWARE_URL}/fixup4x.dat"

        as_nobody wget -q -O "${temp_dir}/start4cd.elf" "${FIRMWARE_URL}/start4cd.elf"

        as_nobody wget -q -O "${temp_dir}/start4db.elf" "${FIRMWARE_URL}/start4db.elf"

        vidal
    
Error correction on  start4.elf copies...

              r756
            
        as_nobody wget -q -O "${temp_dir}/start4.elf" "${FIRMWARE_URL}/start4.elf"

        vidal
    
proposal to add copy of fixup4*  and start4* from firmware repository...

              r710
            
        as_nobody wget -q -O "${temp_dir}/start4x.elf" "${FIRMWARE_URL}/start4x.elf"

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        # Move downloaded boot binaries

        mv "${temp_dir}/"* "${BOOT_DIR}/"

        # Remove temporary directory for boot binaries

        rm -fr "${temp_dir}"

        # Set permissions of the boot binaries

        chown -R root:root "${BOOT_DIR}"

        chmod -R 600 "${BOOT_DIR}"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

      # Setup firmware boot cmdline

        Unknown
    
USBBOOT is Back...

              r568
            
      if [ "$ENABLE_USBBOOT" = true ] ; then

        CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      else

        Unknown
    
USBBOOT is Back...

              r568
            
        if [ "$ENABLE_SPLITFS" = true ] ; then

          CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda1 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"

        else

          CMDLINE="dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"

        fi

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

      # Add encrypted root partition to cmdline.txt

      if [ "$ENABLE_CRYPTFS" = true ] ; then

        if [ "$ENABLE_SPLITFS" = true ] ; then

        Unknown
    
https://www.shellcheck.net/...

              r336
            
          CMDLINE=$(echo "${CMDLINE}" | sed "s/sda1/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda1:${CRYPTFS_MAPPING}/")

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
        else

        Unknown
    
USBBOOT is Back...

              r568
            
          if [ "$ENABLE_USBBOOT" = true ] ; then

            CMDLINE=$(echo "${CMDLINE}" | sed "s/sda2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda2:${CRYPTFS_MAPPING}/")

          else

            CMDLINE=$(echo "${CMDLINE}" | sed "s/mmcblk0p2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/mmcblk0p2:${CRYPTFS_MAPPING}/")

          fi

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
        fi

      fi

        Unknown
    
Dropbear initramfs...

              r501
            
      # Enable Kernel messages on standard output

        Unknown
    
Bluetooth and serial...

              r451
            
      if [ "$ENABLE_PRINTK" = true ] ; then

        install_readonly files/sysctl.d/83-rpi-printk.conf "${ETC_DIR}/sysctl.d/83-rpi-printk.conf"

      fi

        Unknown
    
USBBOOT is Back...

              r568
            
      # Enable Kernel messages on standard output

      if [ "$KERNEL_SECURITY" = true ] ; then

        install_readonly files/sysctl.d/84-rpi-ASLR.conf "${ETC_DIR}/sysctl.d/84-rpi-ASLR.conf"

      fi

        Unknown
    
Dropbear initramfs...

              r501
            
      # Install udev rule for serial alias - serial0 = console serial1=bluetooth

        Unknown
    
Bluetooth and serial...

              r451
            
      install_readonly files/etc/99-com.rules "${LIB_DIR}/udev/rules.d/99-com.rules"

        Unknown
    
Dropbear initramfs...

              r501
            
      # Remove IPv6 networking support

      if [ "$ENABLE_IPV6" = false ] ; then

        CMDLINE="${CMDLINE} ipv6.disable=1"

      fi

      # Automatically assign predictable network interface names

      if [ "$ENABLE_IFNAMES" = false ] ; then

        CMDLINE="${CMDLINE} net.ifnames=0"

      else

        CMDLINE="${CMDLINE} net.ifnames=1"

      fi

        drtyhlpr
    
Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT

              r539
            
      # Disable Raspberry Pi console logo

      if [ "$ENABLE_LOGO" = false ] ; then

        CMDLINE="${CMDLINE} logo.nologo"

      fi

      # Strictly limit verbosity of boot up console messages

      if [ "$ENABLE_SILENT_BOOT" = true ] ; then

        CMDLINE="${CMDLINE} quiet loglevel=0 rd.systemd.show_status=auto rd.udev.log_priority=0"

      fi

        Unknown
    
Dropbear initramfs...

              r501
            
      # Install firmware config

      install_readonly files/boot/config.txt "${BOOT_DIR}/config.txt"

        drtyhlpr
    
Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT

              r539
            
      # Disable Raspberry Pi console logo

        Vincent KULAK
    
Fix #218 typo

              r740
            
      if [ "$ENABLE_SPLASH" = false ] ; then

        drtyhlpr
    
Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT

              r539
            
        echo "disable_splash=1" >> "${BOOT_DIR}/config.txt"

      fi

        Unknown
    
Dropbear initramfs...

              r501
            
      # Locks CPU frequency at maximum

      if [ "$ENABLE_TURBO" = true ] ; then

        echo "force_turbo=1" >> "${BOOT_DIR}/config.txt"

        # helps to avoid sdcard corruption when force_turbo is enabled.

        echo "boot_delay=1" >> "${BOOT_DIR}/config.txt"

      fi

        Unknown
    
PATCHES for:...

              r665
            
      if [ "$RPI_MODEL" = 0 ] || [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ] || [ "$RPI_MODEL" = 4 ]; then

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Bluetooth and serial...

              r451
            
        # Bluetooth enabled

        if [ "$ENABLE_BLUETOOTH" = true ] ; then

          # Create temporary directory for Bluetooth sources

          temp_dir=$(as_nobody mktemp -d)

          # Fetch Bluetooth sources

          as_nobody git -C "${temp_dir}" clone "${BLUETOOTH_URL}"

          # Copy downloaded sources

          mv "${temp_dir}/pi-bluetooth" "${R}/tmp/"

          # Set permissions

          chown -R root:root "${R}/tmp/pi-bluetooth"

        Unknown
    
PATCHES for:...

              r665
            
          # Bluetooth firmware from arch aur https://aur.archlinux.org/packages/pi-bluetooth/

          wget -q -O "${R}/tmp/pi-bluetooth/LICENCE.broadcom_bcm43xx" https://aur.archlinux.org/cgit/aur.git/plain/LICENCE.broadcom_bcm43xx?h=pi-bluetooth

          wget -q -O "${R}/tmp/pi-bluetooth/BCM43430A1.hcd" https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/master/broadcom/BCM43430A1.hcd

        Unknown
    
Bluetooth and serial...

              r451
            
          # Install tools

          install_readonly "${R}/tmp/pi-bluetooth/usr/bin/btuart" "${R}/usr/bin/btuart"

          install_readonly "${R}/tmp/pi-bluetooth/usr/bin/bthelper" "${R}/usr/bin/bthelper"

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Dropbear initramfs...

              r501
            
      	# make scripts executable

      	chmod +x "${R}/usr/bin/bthelper"

      	chmod +x "${R}/usr/bin/btuart"

        Unknown
    
Bluetooth and serial...

              r451
            
          # Install bluetooth udev rule

          install_readonly "${R}/tmp/pi-bluetooth/lib/udev/rules.d/90-pi-bluetooth.rules" "${LIB_DIR}/udev/rules.d/90-pi-bluetooth.rules"

          # Install Firmware Flash file and apropiate licence

          mkdir -p "$BLUETOOTH_FIRMWARE_DIR"

          install_readonly "${R}/tmp/pi-bluetooth/LICENCE.broadcom_bcm43xx" "${BLUETOOTH_FIRMWARE_DIR}/LICENCE.broadcom_bcm43xx"

        Michał Ciołek
    
Fix filename for BCM43430A1.hcd

              r587
            
          install_readonly "${R}/tmp/pi-bluetooth/BCM43430A1.hcd" "${BLUETOOTH_FIRMWARE_DIR}/BCM43430A1.hcd"

        Unknown
    
Bluetooth and serial...

              r451
            
          install_readonly "${R}/tmp/pi-bluetooth/debian/pi-bluetooth.bthelper@.service" "${ETC_DIR}/systemd/system/pi-bluetooth.bthelper@.service"

          install_readonly "${R}/tmp/pi-bluetooth/debian/pi-bluetooth.hciuart.service" "${ETC_DIR}/systemd/system/pi-bluetooth.hciuart.service"

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Dropbear initramfs...

              r501
            
          # Remove temporary directories

        Unknown
    
Bluetooth and serial...

              r451
            
          rm -fr "${temp_dir}"

        Unknown
    
Dropbear initramfs...

              r501
            
      	rm -fr "${R}"/tmp/pi-bluetooth

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Bluetooth and serial...

              r451
            
          # Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 & 15. Slow Bluetooth and slow cpu. Use /dev/ttyS0 instead of /dev/ttyAMA0

          if [ "$ENABLE_MINIUART_OVERLAY" = true ] ; then

      	  # set overlay to swap ttyAMA0 and ttyS0

            echo "dtoverlay=pi3-miniuart-bt" >> "${BOOT_DIR}/config.txt"

      	  if [ "$ENABLE_TURBO" = false ] ; then 

        Unknown
    
formating and dropbear fix for static ip

              r569
            
              echo "core_freq=250" >> "${BOOT_DIR}/config.txt"

            fi 

        Unknown
    
Bluetooth and serial...

              r451
            
      	fi

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Dropbear initramfs...

              r501
            
      	# Activate services

      	chroot_exec systemctl enable pi-bluetooth.hciuart.service

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Bluetooth and serial...

              r451
            
        else # if ENABLE_BLUETOOTH = false

        	# set overlay to disable bluetooth

          echo "dtoverlay=pi3-disable-bt" >> "${BOOT_DIR}/config.txt"

        fi # ENABLE_BLUETOOTH end

      fi

      # may need sudo systemctl disable hciuart

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      if [ "$ENABLE_CONSOLE" = true ] ; then

        Unknown
    
-Enable_nonfree no longer enables non-free packages while install. now it enables non free packacges in sources.list...

              r732
            
        echo "enable_uart=1"  >> "${BOOT_DIR}/config.txt"

        #More debug output on early but with serial console

        echo "uart_2ndstage=1"  >> "${BOOT_DIR}/config.txt" 

        Unknown
    
Bluetooth and serial...

              r451
            
        # add string to cmdline

        CMDLINE="${CMDLINE} console=serial0,115200"

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        if [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ]|| [ "$RPI_MODEL" = 0 ]; then

          # if force_turbo didn't lock cpu at high speed, lock it at low speed (XOR logic) or miniuart will be broken

          if [ "$ENABLE_TURBO" = false ] ; then 

            echo "core_freq=250" >> "${BOOT_DIR}/config.txt"

          fi 

        fi

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Bluetooth and serial...

              r451
            
        # Enable serial console systemd style

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        chroot_exec systemctl enable serial-getty@serial0.service

        Unknown
    
Bluetooth and serial...

              r451
            
      else

        echo "enable_uart=0"  >> "${BOOT_DIR}/config.txt"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

        Yannick Schinko
    
Disable dphys-swapfile for the first boot

              r577
            
      # Disable dphys-swapfile service. Will get enabled on first boot

      if [ "$ENABLE_DPHYSSWAP" = true ] ; then

        chroot_exec systemctl disable dphys-swapfile

      fi

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
      if [ "$ENABLE_SYSTEMDSWAP" = true ] ; then

        # Create temporary directory for systemd-swap sources

        temp_dir=$(as_nobody mktemp -d)

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        # Fetch systemd-swap sources

        as_nobody git -C "${temp_dir}" clone "${SYSTEMDSWAP_URL}"

        # Copy downloaded systemd-swap sources

        mv "${temp_dir}/systemd-swap" "${R}/tmp/"

        # Change into downloaded src dir

        cd "${R}/tmp/systemd-swap" || exit

        Unknown
    
PATCHES for:...

              r665
            
        # Get Verion

        VERSION=$(git tag | tail -n 1)

        #sed -i "s/DEB_NAME=.*/DEB_NAME=systemd-swap_all/g" "${R}/tmp/systemd-swap/package.sh"

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        # Build package

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        bash ./package.sh debian

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        Unknown
    
formating and dropbear fix for static ip

              r569
            
        # Change back into script root dir

        cd "${WORKDIR}" || exit

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        Unknown
    
formating and dropbear fix for static ip

              r569
            
        # Set permissions of the systemd-swap sources

        chown -R root:root "${R}/tmp/systemd-swap"

        # Install package - IMPROVE AND MAKE IT POSSIBLE WITHOUT VERSION NR.

        Unknown
    
PATCHES for:...

              r665
            
        chroot_exec dpkg -i /tmp/systemd-swap/systemd-swap_"$VERSION"_all.deb

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        # Enable service

        chroot_exec systemctl enable systemd-swap

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        # Remove temporary directory for systemd-swap sources

        rm -fr "${temp_dir}"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      else

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        # Enable ZSWAP in cmdline if systemd-swap is not used

        if [ "$KERNEL_ZSWAP" = true ] ; then

        Unknown
    
formating and dropbear fix for static ip

              r569
            
          CMDLINE="${CMDLINE} zswap.enabled=1 zswap.max_pool_percent=25 zswap.compressor=lz4"

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        fi

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        if [ "$KERNEL_SECURITY" = true ] ; then

          CMDLINE="${CMDLINE} apparmor=1 security=apparmor" 

        fi

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      # Install firmware boot cmdline

      echo "${CMDLINE}" > "${BOOT_DIR}/cmdline.txt"

      # Setup minimal GPU memory allocation size: 16MB (no X)

        vidal
    
enble to add graphics acceleration for Pi4

              r758
            
      if [ "$ENABLE_MINGPU" = true ] && [ "$ENABLE_GR_ACCEL" = false ]  ; then

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
        echo "gpu_mem=16" >> "${BOOT_DIR}/config.txt"

      fi

      # Setup boot with initramfs

      if [ "$ENABLE_INITRAMFS" = true ] ; then

        echo "initramfs initramfs-${KERNEL_VERSION} followkernel" >> "${BOOT_DIR}/config.txt"

      fi

      # Create firmware configuration and cmdline symlinks

      ln -sf firmware/config.txt "${R}/boot/config.txt"

      ln -sf firmware/cmdline.txt "${R}/boot/cmdline.txt"

      # Install and setup kernel modules to load at boot

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
      mkdir -p "${LIB_DIR}/modules-load.d/"

      install_readonly files/modules/rpi2.conf "${LIB_DIR}/modules-load.d/rpi2.conf"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      # Load hardware random module at boot

      if [ "$ENABLE_HWRANDOM" = true ] && [ "$BUILD_KERNEL" = false ] ; then

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
        sed -i "s/^# bcm2708_rng/bcm2708_rng/" "${LIB_DIR}/modules-load.d/rpi2.conf"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

      # Load sound module at boot

      if [ "$ENABLE_SOUND" = true ] ; then

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
        sed -i "s/^# snd_bcm2835/snd_bcm2835/" "${LIB_DIR}/modules-load.d/rpi2.conf"

        drtyhlpr
    
Updated: Dropping privileges, chroot compiler install, dropbear sshd config

              r142
            
      else

        echo "dtparam=audio=off" >> "${BOOT_DIR}/config.txt"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

      # Enable I2C interface

      if [ "$ENABLE_I2C" = true ] ; then

        echo "dtparam=i2c_arm=on" >> "${BOOT_DIR}/config.txt"

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
        sed -i "s/^# i2c-bcm2708/i2c-bcm2708/" "${LIB_DIR}/modules-load.d/rpi2.conf"

        sed -i "s/^# i2c-dev/i2c-dev/" "${LIB_DIR}/modules-load.d/rpi2.conf"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

      # Enable SPI interface

      if [ "$ENABLE_SPI" = true ] ; then

        echo "dtparam=spi=on" >> "${BOOT_DIR}/config.txt"

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
        echo "spi-bcm2708" >> "${LIB_DIR}/modules-load.d/rpi2.conf"

        Unknown
    
Fixing SPI on RPI 3B+

              r274
            
        if [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ]; then

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
          sed -i "s/spi-bcm2708/spi-bcm2835/" "${LIB_DIR}/modules-load.d/rpi2.conf"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
        fi

      fi

        vidal
    
enble to add graphics acceleration for Pi4

              r758
            
      #Enable graphics acceleration for Model 4

      if [ "$RPI_MODEL" = 4 ] && [ "$ENABLE_GR_ACCEL" = true ] ; then

        echo "max_framebuffers=2" >> "${BOOT_DIR}/config.txt"

        echo "arm_64bit=1" >> "${BOOT_DIR}/config.txt"

        echo "cmdline=cmdline.txt" >> "${BOOT_DIR}/config.txt"

        echo "dtparam=audio=on" >> "${BOOT_DIR}/config.txt"

        echo "gpu_mem=128" >> "${BOOT_DIR}/config.txt"

        echo "dtoverlay=vc4-fkms-v3d, cma-128" >> "${BOOT_DIR}/config.txt"

      fi

        drtyhlpr
    
Added: Disable RPi2/3 under-volt warnings (from michaelfranzl PR)

              r130
            
      # Disable RPi2/3 under-voltage warnings

        Unknown
    
https://www.shellcheck.net/...

              r336
            
      if [ -n "$DISABLE_UNDERVOLT_WARNINGS" ] ; then

        drtyhlpr
    
Added: Disable RPi2/3 under-volt warnings (from michaelfranzl PR)

              r130
            
        echo "avoid_warnings=${DISABLE_UNDERVOLT_WARNINGS}" >> "${BOOT_DIR}/config.txt"

      fi

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      # Install kernel modules blacklist

      mkdir -p "${ETC_DIR}/modprobe.d/"

      install_readonly files/modules/raspi-blacklist.conf "${ETC_DIR}/modprobe.d/raspi-blacklist.conf"

      # Install sysctl.d configuration files

      install_readonly files/sysctl.d/81-rpi-vm.conf "${ETC_DIR}/sysctl.d/81-rpi-vm.conf"

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Dépôts
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages

drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	#
vidal Added "4" in comments to indicate tha raspi4 is treated	r712	# Setup RPi2/3/4 config and cmdline
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	#

		# Load utility functions
		. ./functions.sh

Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	if [ -n "$RPI_FIRMWARE_DIR" ] && [ -d "$RPI_FIRMWARE_DIR" ] ; then
		# Install boot binaries from local directory
		cp "${RPI_FIRMWARE_DIR}"/boot/bootcode.bin "${BOOT_DIR}"/bootcode.bin
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup.dat "${BOOT_DIR}"/fixup.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup_cd.dat "${BOOT_DIR}"/fixup_cd.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup_x.dat "${BOOT_DIR}"/fixup_x.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/start.elf "${BOOT_DIR}"/start.elf
		cp "${RPI_FIRMWARE_DIR}"/boot/start_cd.elf "${BOOT_DIR}"/start_cd.elf
		cp "${RPI_FIRMWARE_DIR}"/boot/start_x.elf "${BOOT_DIR}"/start_x.elf
vidal proposal to add copy of fixup4* and start4* from firmware repository...	r710	cp "${RPI_FIRMWARE_DIR}"/boot/fixup4cd.dat "${BOOT_DIR}"/fixup4cd.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup4.dat "${BOOT_DIR}"/fixup4.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup4db.dat "${BOOT_DIR}"/fixup4db.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup4x.dat "${BOOT_DIR}"/fixup4x.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/start4cd.elf "${BOOT_DIR}"/start4cd.elf
		cp "${RPI_FIRMWARE_DIR}"/boot/start4db.elf "${BOOT_DIR}"/start4db.elf
vidal Error correction on start4.elf copies...	r756	cp "${RPI_FIRMWARE_DIR}"/boot/start4.elf "${BOOT_DIR}"/start4.elf
vidal proposal to add copy of fixup4* and start4* from firmware repository...	r710	cp "${RPI_FIRMWARE_DIR}"/boot/start4x.elf "${BOOT_DIR}"/start4x.elf
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	else
		# Create temporary directory for boot binaries
		temp_dir=$(as_nobody mktemp -d)

		# Install latest boot binaries from raspberry/firmware github
		as_nobody wget -q -O "${temp_dir}/bootcode.bin" "${FIRMWARE_URL}/bootcode.bin"
		as_nobody wget -q -O "${temp_dir}/fixup.dat" "${FIRMWARE_URL}/fixup.dat"
		as_nobody wget -q -O "${temp_dir}/fixup_cd.dat" "${FIRMWARE_URL}/fixup_cd.dat"
		as_nobody wget -q -O "${temp_dir}/fixup_x.dat" "${FIRMWARE_URL}/fixup_x.dat"
		as_nobody wget -q -O "${temp_dir}/start.elf" "${FIRMWARE_URL}/start.elf"
		as_nobody wget -q -O "${temp_dir}/start_cd.elf" "${FIRMWARE_URL}/start_cd.elf"
		as_nobody wget -q -O "${temp_dir}/start_x.elf" "${FIRMWARE_URL}/start_x.elf"
vidal proposal to add copy of fixup4* and start4* from firmware repository...	r710	as_nobody wget -q -O "${temp_dir}/fixup4cd.dat" "${FIRMWARE_URL}/fixup4cd.dat"
		as_nobody wget -q -O "${temp_dir}/fixup4.dat" "${FIRMWARE_URL}/fixup4.dat"
		as_nobody wget -q -O "${temp_dir}/fixup4db.dat" "${FIRMWARE_URL}/fixup4db.dat"
		as_nobody wget -q -O "${temp_dir}/fixup4x.dat" "${FIRMWARE_URL}/fixup4x.dat"
		as_nobody wget -q -O "${temp_dir}/start4cd.elf" "${FIRMWARE_URL}/start4cd.elf"
		as_nobody wget -q -O "${temp_dir}/start4db.elf" "${FIRMWARE_URL}/start4db.elf"
vidal Error correction on start4.elf copies...	r756	as_nobody wget -q -O "${temp_dir}/start4.elf" "${FIRMWARE_URL}/start4.elf"
vidal proposal to add copy of fixup4* and start4* from firmware repository...	r710	as_nobody wget -q -O "${temp_dir}/start4x.elf" "${FIRMWARE_URL}/start4x.elf"
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502
		# Move downloaded boot binaries
		mv "${temp_dir}/"* "${BOOT_DIR}/"

		# Remove temporary directory for boot binaries
		rm -fr "${temp_dir}"

		# Set permissions of the boot binaries
		chown -R root:root "${BOOT_DIR}"
		chmod -R 600 "${BOOT_DIR}"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

		# Setup firmware boot cmdline
Unknown USBBOOT is Back...	r568	if [ "$ENABLE_USBBOOT" = true ] ; then
		CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	else
Unknown USBBOOT is Back...	r568	if [ "$ENABLE_SPLITFS" = true ] ; then
		CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda1 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"
		else
		CMDLINE="dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"
		fi
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

		# Add encrypted root partition to cmdline.txt
		if [ "$ENABLE_CRYPTFS" = true ] ; then
		if [ "$ENABLE_SPLITFS" = true ] ; then
Unknown https://www.shellcheck.net/...	r336	CMDLINE=$(echo "${CMDLINE}" \| sed "s/sda1/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda1:${CRYPTFS_MAPPING}/")
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	else
Unknown USBBOOT is Back...	r568	if [ "$ENABLE_USBBOOT" = true ] ; then
		CMDLINE=$(echo "${CMDLINE}" \| sed "s/sda2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda2:${CRYPTFS_MAPPING}/")
		else
		CMDLINE=$(echo "${CMDLINE}" \| sed "s/mmcblk0p2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/mmcblk0p2:${CRYPTFS_MAPPING}/")
		fi
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi
		fi

Unknown Dropbear initramfs...	r501	# Enable Kernel messages on standard output
Unknown Bluetooth and serial...	r451	if [ "$ENABLE_PRINTK" = true ] ; then
		install_readonly files/sysctl.d/83-rpi-printk.conf "${ETC_DIR}/sysctl.d/83-rpi-printk.conf"
		fi

Unknown USBBOOT is Back...	r568	# Enable Kernel messages on standard output
		if [ "$KERNEL_SECURITY" = true ] ; then
		install_readonly files/sysctl.d/84-rpi-ASLR.conf "${ETC_DIR}/sysctl.d/84-rpi-ASLR.conf"
		fi

Unknown Dropbear initramfs...	r501	# Install udev rule for serial alias - serial0 = console serial1=bluetooth
Unknown Bluetooth and serial...	r451	install_readonly files/etc/99-com.rules "${LIB_DIR}/udev/rules.d/99-com.rules"

Unknown Dropbear initramfs...	r501	# Remove IPv6 networking support
		if [ "$ENABLE_IPV6" = false ] ; then
		CMDLINE="${CMDLINE} ipv6.disable=1"
		fi

		# Automatically assign predictable network interface names
		if [ "$ENABLE_IFNAMES" = false ] ; then
		CMDLINE="${CMDLINE} net.ifnames=0"
		else
		CMDLINE="${CMDLINE} net.ifnames=1"
		fi

drtyhlpr Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT	r539	# Disable Raspberry Pi console logo
		if [ "$ENABLE_LOGO" = false ] ; then
		CMDLINE="${CMDLINE} logo.nologo"
		fi

		# Strictly limit verbosity of boot up console messages
		if [ "$ENABLE_SILENT_BOOT" = true ] ; then
		CMDLINE="${CMDLINE} quiet loglevel=0 rd.systemd.show_status=auto rd.udev.log_priority=0"
		fi

Unknown Dropbear initramfs...	r501	# Install firmware config
		install_readonly files/boot/config.txt "${BOOT_DIR}/config.txt"

drtyhlpr Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT	r539	# Disable Raspberry Pi console logo
Vincent KULAK Fix #218 typo	r740	if [ "$ENABLE_SPLASH" = false ] ; then
drtyhlpr Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT	r539	echo "disable_splash=1" >> "${BOOT_DIR}/config.txt"
		fi

Unknown Dropbear initramfs...	r501	# Locks CPU frequency at maximum
		if [ "$ENABLE_TURBO" = true ] ; then
		echo "force_turbo=1" >> "${BOOT_DIR}/config.txt"
		# helps to avoid sdcard corruption when force_turbo is enabled.
		echo "boot_delay=1" >> "${BOOT_DIR}/config.txt"
		fi

Unknown PATCHES for:...	r665	if [ "$RPI_MODEL" = 0 ] \|\| [ "$RPI_MODEL" = 3 ] \|\| [ "$RPI_MODEL" = 3P ] \|\| [ "$RPI_MODEL" = 4 ]; then
Unknown - remove some whitespace...	r521
Unknown Bluetooth and serial...	r451	# Bluetooth enabled
		if [ "$ENABLE_BLUETOOTH" = true ] ; then
		# Create temporary directory for Bluetooth sources
		temp_dir=$(as_nobody mktemp -d)

		# Fetch Bluetooth sources
		as_nobody git -C "${temp_dir}" clone "${BLUETOOTH_URL}"

		# Copy downloaded sources
		mv "${temp_dir}/pi-bluetooth" "${R}/tmp/"

		# Set permissions
		chown -R root:root "${R}/tmp/pi-bluetooth"
Unknown PATCHES for:...	r665
		# Bluetooth firmware from arch aur https://aur.archlinux.org/packages/pi-bluetooth/
		wget -q -O "${R}/tmp/pi-bluetooth/LICENCE.broadcom_bcm43xx" https://aur.archlinux.org/cgit/aur.git/plain/LICENCE.broadcom_bcm43xx?h=pi-bluetooth
		wget -q -O "${R}/tmp/pi-bluetooth/BCM43430A1.hcd" https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/master/broadcom/BCM43430A1.hcd
Unknown Bluetooth and serial...	r451
		# Install tools
		install_readonly "${R}/tmp/pi-bluetooth/usr/bin/btuart" "${R}/usr/bin/btuart"
		install_readonly "${R}/tmp/pi-bluetooth/usr/bin/bthelper" "${R}/usr/bin/bthelper"
Unknown - remove some whitespace...	r521
Unknown Dropbear initramfs...	r501	# make scripts executable
		chmod +x "${R}/usr/bin/bthelper"
		chmod +x "${R}/usr/bin/btuart"
Unknown Bluetooth and serial...	r451
		# Install bluetooth udev rule
		install_readonly "${R}/tmp/pi-bluetooth/lib/udev/rules.d/90-pi-bluetooth.rules" "${LIB_DIR}/udev/rules.d/90-pi-bluetooth.rules"

		# Install Firmware Flash file and apropiate licence
		mkdir -p "$BLUETOOTH_FIRMWARE_DIR"
		install_readonly "${R}/tmp/pi-bluetooth/LICENCE.broadcom_bcm43xx" "${BLUETOOTH_FIRMWARE_DIR}/LICENCE.broadcom_bcm43xx"
Michał Ciołek Fix filename for BCM43430A1.hcd	r587	install_readonly "${R}/tmp/pi-bluetooth/BCM43430A1.hcd" "${BLUETOOTH_FIRMWARE_DIR}/BCM43430A1.hcd"
Unknown Bluetooth and serial...	r451	install_readonly "${R}/tmp/pi-bluetooth/debian/pi-bluetooth.bthelper@.service" "${ETC_DIR}/systemd/system/pi-bluetooth.bthelper@.service"
		install_readonly "${R}/tmp/pi-bluetooth/debian/pi-bluetooth.hciuart.service" "${ETC_DIR}/systemd/system/pi-bluetooth.hciuart.service"
Unknown - remove some whitespace...	r521
Unknown Dropbear initramfs...	r501	# Remove temporary directories
Unknown Bluetooth and serial...	r451	rm -fr "${temp_dir}"
Unknown Dropbear initramfs...	r501	rm -fr "${R}"/tmp/pi-bluetooth
Unknown - remove some whitespace...	r521
Unknown Bluetooth and serial...	r451	# Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 & 15. Slow Bluetooth and slow cpu. Use /dev/ttyS0 instead of /dev/ttyAMA0
		if [ "$ENABLE_MINIUART_OVERLAY" = true ] ; then
		# set overlay to swap ttyAMA0 and ttyS0
		echo "dtoverlay=pi3-miniuart-bt" >> "${BOOT_DIR}/config.txt"

		if [ "$ENABLE_TURBO" = false ] ; then
Unknown formating and dropbear fix for static ip	r569	echo "core_freq=250" >> "${BOOT_DIR}/config.txt"
		fi

Unknown Bluetooth and serial...	r451	fi
Unknown - remove some whitespace...	r521
Unknown Dropbear initramfs...	r501	# Activate services
		chroot_exec systemctl enable pi-bluetooth.hciuart.service
Unknown - remove some whitespace...	r521
Unknown Bluetooth and serial...	r451	else # if ENABLE_BLUETOOTH = false
		# set overlay to disable bluetooth
		echo "dtoverlay=pi3-disable-bt" >> "${BOOT_DIR}/config.txt"
		fi # ENABLE_BLUETOOTH end
		fi

		# may need sudo systemctl disable hciuart
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	if [ "$ENABLE_CONSOLE" = true ] ; then
Unknown -Enable_nonfree no longer enables non-free packages while install. now it enables non free packacges in sources.list...	r732	echo "enable_uart=1" >> "${BOOT_DIR}/config.txt"
		#More debug output on early but with serial console
		echo "uart_2ndstage=1" >> "${BOOT_DIR}/config.txt"

Unknown Bluetooth and serial...	r451	# add string to cmdline
		CMDLINE="${CMDLINE} console=serial0,115200"
Unknown formating and dropbear fix for static ip	r569
		if [ "$RPI_MODEL" = 3 ] \|\| [ "$RPI_MODEL" = 3P ]\|\| [ "$RPI_MODEL" = 0 ]; then
		# if force_turbo didn't lock cpu at high speed, lock it at low speed (XOR logic) or miniuart will be broken
		if [ "$ENABLE_TURBO" = false ] ; then
		echo "core_freq=250" >> "${BOOT_DIR}/config.txt"
		fi
		fi
Unknown - remove some whitespace...	r521
Unknown Bluetooth and serial...	r451	# Enable serial console systemd style
Unknown formating and dropbear fix for static ip	r569	chroot_exec systemctl enable serial-getty@serial0.service
Unknown Bluetooth and serial...	r451	else
		echo "enable_uart=0" >> "${BOOT_DIR}/config.txt"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

Yannick Schinko Disable dphys-swapfile for the first boot	r577	# Disable dphys-swapfile service. Will get enabled on first boot
		if [ "$ENABLE_DPHYSSWAP" = true ] ; then
		chroot_exec systemctl disable dphys-swapfile
		fi

Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	if [ "$ENABLE_SYSTEMDSWAP" = true ] ; then
		# Create temporary directory for systemd-swap sources
		temp_dir=$(as_nobody mktemp -d)
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	# Fetch systemd-swap sources
		as_nobody git -C "${temp_dir}" clone "${SYSTEMDSWAP_URL}"

		# Copy downloaded systemd-swap sources
		mv "${temp_dir}/systemd-swap" "${R}/tmp/"

		# Change into downloaded src dir
		cd "${R}/tmp/systemd-swap" \|\| exit
Unknown PATCHES for:...	r665
		# Get Verion
		VERSION=$(git tag \| tail -n 1)
		#sed -i "s/DEB_NAME=.*/DEB_NAME=systemd-swap_all/g" "${R}/tmp/systemd-swap/package.sh"

Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	# Build package
Unknown formating and dropbear fix for static ip	r569	bash ./package.sh debian
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502
Unknown formating and dropbear fix for static ip	r569	# Change back into script root dir
		cd "${WORKDIR}" \|\| exit
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502
Unknown formating and dropbear fix for static ip	r569	# Set permissions of the systemd-swap sources
		chown -R root:root "${R}/tmp/systemd-swap"

		# Install package - IMPROVE AND MAKE IT POSSIBLE WITHOUT VERSION NR.
Unknown PATCHES for:...	r665	chroot_exec dpkg -i /tmp/systemd-swap/systemd-swap_"$VERSION"_all.deb
Unknown formating and dropbear fix for static ip	r569
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	# Enable service
		chroot_exec systemctl enable systemd-swap

Unknown formating and dropbear fix for static ip	r569	# Remove temporary directory for systemd-swap sources
		rm -fr "${temp_dir}"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	else
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	# Enable ZSWAP in cmdline if systemd-swap is not used
		if [ "$KERNEL_ZSWAP" = true ] ; then
Unknown formating and dropbear fix for static ip	r569	CMDLINE="${CMDLINE} zswap.enabled=1 zswap.max_pool_percent=25 zswap.compressor=lz4"
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	fi
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi
Unknown formating and dropbear fix for static ip	r569	if [ "$KERNEL_SECURITY" = true ] ; then
		CMDLINE="${CMDLINE} apparmor=1 security=apparmor"
		fi
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128
		# Install firmware boot cmdline
		echo "${CMDLINE}" > "${BOOT_DIR}/cmdline.txt"

		# Setup minimal GPU memory allocation size: 16MB (no X)
vidal enble to add graphics acceleration for Pi4	r758	if [ "$ENABLE_MINGPU" = true ] && [ "$ENABLE_GR_ACCEL" = false ] ; then
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	echo "gpu_mem=16" >> "${BOOT_DIR}/config.txt"
		fi

		# Setup boot with initramfs
		if [ "$ENABLE_INITRAMFS" = true ] ; then
		echo "initramfs initramfs-${KERNEL_VERSION} followkernel" >> "${BOOT_DIR}/config.txt"
		fi

		# Create firmware configuration and cmdline symlinks
		ln -sf firmware/config.txt "${R}/boot/config.txt"
		ln -sf firmware/cmdline.txt "${R}/boot/cmdline.txt"

		# Install and setup kernel modules to load at boot
Unknown add bluetooth firmware and systemd service...	r368	mkdir -p "${LIB_DIR}/modules-load.d/"
		install_readonly files/modules/rpi2.conf "${LIB_DIR}/modules-load.d/rpi2.conf"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128
		# Load hardware random module at boot
		if [ "$ENABLE_HWRANDOM" = true ] && [ "$BUILD_KERNEL" = false ] ; then
Unknown add bluetooth firmware and systemd service...	r368	sed -i "s/^# bcm2708_rng/bcm2708_rng/" "${LIB_DIR}/modules-load.d/rpi2.conf"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

		# Load sound module at boot
		if [ "$ENABLE_SOUND" = true ] ; then
Unknown add bluetooth firmware and systemd service...	r368	sed -i "s/^# snd_bcm2835/snd_bcm2835/" "${LIB_DIR}/modules-load.d/rpi2.conf"
drtyhlpr Updated: Dropping privileges, chroot compiler install, dropbear sshd config	r142	else
		echo "dtparam=audio=off" >> "${BOOT_DIR}/config.txt"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

		# Enable I2C interface
		if [ "$ENABLE_I2C" = true ] ; then
		echo "dtparam=i2c_arm=on" >> "${BOOT_DIR}/config.txt"
Unknown add bluetooth firmware and systemd service...	r368	sed -i "s/^# i2c-bcm2708/i2c-bcm2708/" "${LIB_DIR}/modules-load.d/rpi2.conf"
		sed -i "s/^# i2c-dev/i2c-dev/" "${LIB_DIR}/modules-load.d/rpi2.conf"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

		# Enable SPI interface
		if [ "$ENABLE_SPI" = true ] ; then
		echo "dtparam=spi=on" >> "${BOOT_DIR}/config.txt"
Unknown add bluetooth firmware and systemd service...	r368	echo "spi-bcm2708" >> "${LIB_DIR}/modules-load.d/rpi2.conf"
Unknown Fixing SPI on RPI 3B+	r274	if [ "$RPI_MODEL" = 3 ] \|\| [ "$RPI_MODEL" = 3P ]; then
Unknown add bluetooth firmware and systemd service...	r368	sed -i "s/spi-bcm2708/spi-bcm2835/" "${LIB_DIR}/modules-load.d/rpi2.conf"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi
		fi

vidal enble to add graphics acceleration for Pi4	r758	#Enable graphics acceleration for Model 4
		if [ "$RPI_MODEL" = 4 ] && [ "$ENABLE_GR_ACCEL" = true ] ; then
		echo "max_framebuffers=2" >> "${BOOT_DIR}/config.txt"
		echo "arm_64bit=1" >> "${BOOT_DIR}/config.txt"
		echo "cmdline=cmdline.txt" >> "${BOOT_DIR}/config.txt"
		echo "dtparam=audio=on" >> "${BOOT_DIR}/config.txt"
		echo "gpu_mem=128" >> "${BOOT_DIR}/config.txt"
		echo "dtoverlay=vc4-fkms-v3d, cma-128" >> "${BOOT_DIR}/config.txt"
		fi


drtyhlpr Added: Disable RPi2/3 under-volt warnings (from michaelfranzl PR)	r130	# Disable RPi2/3 under-voltage warnings
Unknown https://www.shellcheck.net/...	r336	if [ -n "$DISABLE_UNDERVOLT_WARNINGS" ] ; then
drtyhlpr Added: Disable RPi2/3 under-volt warnings (from michaelfranzl PR)	r130	echo "avoid_warnings=${DISABLE_UNDERVOLT_WARNINGS}" >> "${BOOT_DIR}/config.txt"
		fi

drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	# Install kernel modules blacklist
		mkdir -p "${ETC_DIR}/modprobe.d/"
		install_readonly files/modules/raspi-blacklist.conf "${ETC_DIR}/modprobe.d/raspi-blacklist.conf"

		# Install sysctl.d configuration files
		install_readonly files/sysctl.d/81-rpi-vm.conf "${ETC_DIR}/sysctl.d/81-rpi-vm.conf"