Raspi2-3_GenImage Files · bootstrap.d/15-rpi-config.sh · Collaboration Tremplin des Sciences

Added choice to enable v3d graphics accelerator for Pi4...

Added choice to enable v3d graphics accelerator for Pi4 if true excludes fbturbo for pi4 fbturbo is faulty

vidal - - Load All Authors

Fichier de la dernière révision:

r762:9c40b3f139b8


                r762:9c40b3f139b8

Download file

             15-rpi-config.sh
        
                    341 lines
            
             | 13.1 KiB
            
                | application/x-sh
            
             |
                BashLexer
            
             / bootstrap.d / 15-rpi-config.sh
          
                    Historique
                
                 |
                  Source
                 | Brut
                 |Copy content
                 |Copy permalink

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      #

        vidal
    
Added "4" in comments to indicate tha raspi4 is treated

              r712
            
      # Setup RPi2/3/4 config and cmdline

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      #

      # Load utility functions

      . ./functions.sh

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
      if [ -n "$RPI_FIRMWARE_DIR" ] && [ -d "$RPI_FIRMWARE_DIR" ] ; then

        # Install boot binaries from local directory

        cp "${RPI_FIRMWARE_DIR}"/boot/bootcode.bin "${BOOT_DIR}"/bootcode.bin

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup.dat "${BOOT_DIR}"/fixup.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup_cd.dat "${BOOT_DIR}"/fixup_cd.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup_x.dat "${BOOT_DIR}"/fixup_x.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/start.elf "${BOOT_DIR}"/start.elf

        cp "${RPI_FIRMWARE_DIR}"/boot/start_cd.elf "${BOOT_DIR}"/start_cd.elf

        cp "${RPI_FIRMWARE_DIR}"/boot/start_x.elf "${BOOT_DIR}"/start_x.elf

        vidal
    
proposal to add copy of fixup4*  and start4* from firmware repository...

              r710
            
        cp "${RPI_FIRMWARE_DIR}"/boot/fixup4cd.dat "${BOOT_DIR}"/fixup4cd.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup4.dat "${BOOT_DIR}"/fixup4.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup4db.dat "${BOOT_DIR}"/fixup4db.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/fixup4x.dat "${BOOT_DIR}"/fixup4x.dat

        cp "${RPI_FIRMWARE_DIR}"/boot/start4cd.elf "${BOOT_DIR}"/start4cd.elf

        cp "${RPI_FIRMWARE_DIR}"/boot/start4db.elf "${BOOT_DIR}"/start4db.elf

        cp "${RPI_FIRMWARE_DIR}"/boot/start4.elf "${BOOT_DIR}"/start4x.elf

        cp "${RPI_FIRMWARE_DIR}"/boot/start4x.elf "${BOOT_DIR}"/start4x.elf

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
      else

        # Create temporary directory for boot binaries

        temp_dir=$(as_nobody mktemp -d)

        # Install latest boot binaries from raspberry/firmware github

        as_nobody wget -q -O "${temp_dir}/bootcode.bin" "${FIRMWARE_URL}/bootcode.bin"

        as_nobody wget -q -O "${temp_dir}/fixup.dat" "${FIRMWARE_URL}/fixup.dat"

        as_nobody wget -q -O "${temp_dir}/fixup_cd.dat" "${FIRMWARE_URL}/fixup_cd.dat"

        as_nobody wget -q -O "${temp_dir}/fixup_x.dat" "${FIRMWARE_URL}/fixup_x.dat"

        as_nobody wget -q -O "${temp_dir}/start.elf" "${FIRMWARE_URL}/start.elf"

        as_nobody wget -q -O "${temp_dir}/start_cd.elf" "${FIRMWARE_URL}/start_cd.elf"

        as_nobody wget -q -O "${temp_dir}/start_x.elf" "${FIRMWARE_URL}/start_x.elf"

        vidal
    
proposal to add copy of fixup4*  and start4* from firmware repository...

              r710
            
        as_nobody wget -q -O "${temp_dir}/fixup4cd.dat" "${FIRMWARE_URL}/fixup4cd.dat"

        as_nobody wget -q -O "${temp_dir}/fixup4.dat" "${FIRMWARE_URL}/fixup4.dat"

        as_nobody wget -q -O "${temp_dir}/fixup4db.dat" "${FIRMWARE_URL}/fixup4db.dat"

        as_nobody wget -q -O "${temp_dir}/fixup4x.dat" "${FIRMWARE_URL}/fixup4x.dat"

        as_nobody wget -q -O "${temp_dir}/start4cd.elf" "${FIRMWARE_URL}/start4cd.elf"

        as_nobody wget -q -O "${temp_dir}/start4db.elf" "${FIRMWARE_URL}/start4db.elf"

        as_nobody wget -q -O "${temp_dir}/start4x.elf" "${FIRMWARE_URL}/start4x.elf"

        as_nobody wget -q -O "${temp_dir}/start4x.elf" "${FIRMWARE_URL}/start4x.elf"

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        # Move downloaded boot binaries

        mv "${temp_dir}/"* "${BOOT_DIR}/"

        # Remove temporary directory for boot binaries

        rm -fr "${temp_dir}"

        # Set permissions of the boot binaries

        chown -R root:root "${BOOT_DIR}"

        chmod -R 600 "${BOOT_DIR}"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

      # Setup firmware boot cmdline

        Unknown
    
USBBOOT is Back...

              r568
            
      if [ "$ENABLE_USBBOOT" = true ] ; then

        CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      else

        Unknown
    
USBBOOT is Back...

              r568
            
        if [ "$ENABLE_SPLITFS" = true ] ; then

          CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda1 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"

        else

          CMDLINE="dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"

        fi

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

      # Add encrypted root partition to cmdline.txt

      if [ "$ENABLE_CRYPTFS" = true ] ; then

        if [ "$ENABLE_SPLITFS" = true ] ; then

        Unknown
    
https://www.shellcheck.net/...

              r336
            
          CMDLINE=$(echo "${CMDLINE}" | sed "s/sda1/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda1:${CRYPTFS_MAPPING}/")

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
        else

        Unknown
    
USBBOOT is Back...

              r568
            
          if [ "$ENABLE_USBBOOT" = true ] ; then

            CMDLINE=$(echo "${CMDLINE}" | sed "s/sda2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda2:${CRYPTFS_MAPPING}/")

          else

            CMDLINE=$(echo "${CMDLINE}" | sed "s/mmcblk0p2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/mmcblk0p2:${CRYPTFS_MAPPING}/")

          fi

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
        fi

      fi

        Unknown
    
Dropbear initramfs...

              r501
            
      # Enable Kernel messages on standard output

        Unknown
    
Bluetooth and serial...

              r451
            
      if [ "$ENABLE_PRINTK" = true ] ; then

        install_readonly files/sysctl.d/83-rpi-printk.conf "${ETC_DIR}/sysctl.d/83-rpi-printk.conf"

      fi

        Unknown
    
USBBOOT is Back...

              r568
            
      # Enable Kernel messages on standard output

      if [ "$KERNEL_SECURITY" = true ] ; then

        install_readonly files/sysctl.d/84-rpi-ASLR.conf "${ETC_DIR}/sysctl.d/84-rpi-ASLR.conf"

      fi

        Unknown
    
Dropbear initramfs...

              r501
            
      # Install udev rule for serial alias - serial0 = console serial1=bluetooth

        Unknown
    
Bluetooth and serial...

              r451
            
      install_readonly files/etc/99-com.rules "${LIB_DIR}/udev/rules.d/99-com.rules"

        Unknown
    
Dropbear initramfs...

              r501
            
      # Remove IPv6 networking support

      if [ "$ENABLE_IPV6" = false ] ; then

        CMDLINE="${CMDLINE} ipv6.disable=1"

      fi

      # Automatically assign predictable network interface names

      if [ "$ENABLE_IFNAMES" = false ] ; then

        CMDLINE="${CMDLINE} net.ifnames=0"

      else

        CMDLINE="${CMDLINE} net.ifnames=1"

      fi

        drtyhlpr
    
Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT

              r539
            
      # Disable Raspberry Pi console logo

      if [ "$ENABLE_LOGO" = false ] ; then

        CMDLINE="${CMDLINE} logo.nologo"

      fi

      # Strictly limit verbosity of boot up console messages

      if [ "$ENABLE_SILENT_BOOT" = true ] ; then

        CMDLINE="${CMDLINE} quiet loglevel=0 rd.systemd.show_status=auto rd.udev.log_priority=0"

      fi

        Unknown
    
Dropbear initramfs...

              r501
            
      # Install firmware config

      install_readonly files/boot/config.txt "${BOOT_DIR}/config.txt"

        drtyhlpr
    
Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT

              r539
            
      # Disable Raspberry Pi console logo

        Vincent KULAK
    
Fix #218 typo

              r740
            
      if [ "$ENABLE_SPLASH" = false ] ; then

        drtyhlpr
    
Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT

              r539
            
        echo "disable_splash=1" >> "${BOOT_DIR}/config.txt"

      fi

        Unknown
    
Dropbear initramfs...

              r501
            
      # Locks CPU frequency at maximum

      if [ "$ENABLE_TURBO" = true ] ; then

        echo "force_turbo=1" >> "${BOOT_DIR}/config.txt"

        # helps to avoid sdcard corruption when force_turbo is enabled.

        echo "boot_delay=1" >> "${BOOT_DIR}/config.txt"

      fi

        Unknown
    
PATCHES for:...

              r665
            
      if [ "$RPI_MODEL" = 0 ] || [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ] || [ "$RPI_MODEL" = 4 ]; then

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Bluetooth and serial...

              r451
            
        # Bluetooth enabled

        if [ "$ENABLE_BLUETOOTH" = true ] ; then

          # Create temporary directory for Bluetooth sources

          temp_dir=$(as_nobody mktemp -d)

          # Fetch Bluetooth sources

          as_nobody git -C "${temp_dir}" clone "${BLUETOOTH_URL}"

          # Copy downloaded sources

          mv "${temp_dir}/pi-bluetooth" "${R}/tmp/"

          # Set permissions

          chown -R root:root "${R}/tmp/pi-bluetooth"

        Unknown
    
PATCHES for:...

              r665
            
          # Bluetooth firmware from arch aur https://aur.archlinux.org/packages/pi-bluetooth/

          wget -q -O "${R}/tmp/pi-bluetooth/LICENCE.broadcom_bcm43xx" https://aur.archlinux.org/cgit/aur.git/plain/LICENCE.broadcom_bcm43xx?h=pi-bluetooth

          wget -q -O "${R}/tmp/pi-bluetooth/BCM43430A1.hcd" https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/master/broadcom/BCM43430A1.hcd

        Unknown
    
Bluetooth and serial...

              r451
            
          # Install tools

          install_readonly "${R}/tmp/pi-bluetooth/usr/bin/btuart" "${R}/usr/bin/btuart"

          install_readonly "${R}/tmp/pi-bluetooth/usr/bin/bthelper" "${R}/usr/bin/bthelper"

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Dropbear initramfs...

              r501
            
      	# make scripts executable

      	chmod +x "${R}/usr/bin/bthelper"

      	chmod +x "${R}/usr/bin/btuart"

        Unknown
    
Bluetooth and serial...

              r451
            
          # Install bluetooth udev rule

          install_readonly "${R}/tmp/pi-bluetooth/lib/udev/rules.d/90-pi-bluetooth.rules" "${LIB_DIR}/udev/rules.d/90-pi-bluetooth.rules"

          # Install Firmware Flash file and apropiate licence

          mkdir -p "$BLUETOOTH_FIRMWARE_DIR"

          install_readonly "${R}/tmp/pi-bluetooth/LICENCE.broadcom_bcm43xx" "${BLUETOOTH_FIRMWARE_DIR}/LICENCE.broadcom_bcm43xx"

        Michał Ciołek
    
Fix filename for BCM43430A1.hcd

              r587
            
          install_readonly "${R}/tmp/pi-bluetooth/BCM43430A1.hcd" "${BLUETOOTH_FIRMWARE_DIR}/BCM43430A1.hcd"

        Unknown
    
Bluetooth and serial...

              r451
            
          install_readonly "${R}/tmp/pi-bluetooth/debian/pi-bluetooth.bthelper@.service" "${ETC_DIR}/systemd/system/pi-bluetooth.bthelper@.service"

          install_readonly "${R}/tmp/pi-bluetooth/debian/pi-bluetooth.hciuart.service" "${ETC_DIR}/systemd/system/pi-bluetooth.hciuart.service"

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Dropbear initramfs...

              r501
            
          # Remove temporary directories

        Unknown
    
Bluetooth and serial...

              r451
            
          rm -fr "${temp_dir}"

        Unknown
    
Dropbear initramfs...

              r501
            
      	rm -fr "${R}"/tmp/pi-bluetooth

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Bluetooth and serial...

              r451
            
          # Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 & 15. Slow Bluetooth and slow cpu. Use /dev/ttyS0 instead of /dev/ttyAMA0

          if [ "$ENABLE_MINIUART_OVERLAY" = true ] ; then

      	  # set overlay to swap ttyAMA0 and ttyS0

            echo "dtoverlay=pi3-miniuart-bt" >> "${BOOT_DIR}/config.txt"

      	  if [ "$ENABLE_TURBO" = false ] ; then 

        Unknown
    
formating and dropbear fix for static ip

              r569
            
              echo "core_freq=250" >> "${BOOT_DIR}/config.txt"

            fi 

        Unknown
    
Bluetooth and serial...

              r451
            
      	fi

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Dropbear initramfs...

              r501
            
      	# Activate services

      	chroot_exec systemctl enable pi-bluetooth.hciuart.service

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Bluetooth and serial...

              r451
            
        else # if ENABLE_BLUETOOTH = false

        	# set overlay to disable bluetooth

          echo "dtoverlay=pi3-disable-bt" >> "${BOOT_DIR}/config.txt"

        fi # ENABLE_BLUETOOTH end

      fi

      # may need sudo systemctl disable hciuart

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      if [ "$ENABLE_CONSOLE" = true ] ; then

        Unknown
    
-Enable_nonfree no longer enables non-free packages while install. now it enables non free packacges in sources.list...

              r732
            
        echo "enable_uart=1"  >> "${BOOT_DIR}/config.txt"

        #More debug output on early but with serial console

        echo "uart_2ndstage=1"  >> "${BOOT_DIR}/config.txt" 

        Unknown
    
Bluetooth and serial...

              r451
            
        # add string to cmdline

        CMDLINE="${CMDLINE} console=serial0,115200"

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        if [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ]|| [ "$RPI_MODEL" = 0 ]; then

          # if force_turbo didn't lock cpu at high speed, lock it at low speed (XOR logic) or miniuart will be broken

          if [ "$ENABLE_TURBO" = false ] ; then 

            echo "core_freq=250" >> "${BOOT_DIR}/config.txt"

          fi 

        fi

        Unknown
    
- remove some whitespace...

              r521
            
        Unknown
    
Bluetooth and serial...

              r451
            
        # Enable serial console systemd style

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        chroot_exec systemctl enable serial-getty@serial0.service

        Unknown
    
Bluetooth and serial...

              r451
            
      else

        echo "enable_uart=0"  >> "${BOOT_DIR}/config.txt"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

        Yannick Schinko
    
Disable dphys-swapfile for the first boot

              r577
            
      # Disable dphys-swapfile service. Will get enabled on first boot

      if [ "$ENABLE_DPHYSSWAP" = true ] ; then

        chroot_exec systemctl disable dphys-swapfile

      fi

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
      if [ "$ENABLE_SYSTEMDSWAP" = true ] ; then

        # Create temporary directory for systemd-swap sources

        temp_dir=$(as_nobody mktemp -d)

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        # Fetch systemd-swap sources

        as_nobody git -C "${temp_dir}" clone "${SYSTEMDSWAP_URL}"

        # Copy downloaded systemd-swap sources

        mv "${temp_dir}/systemd-swap" "${R}/tmp/"

        # Change into downloaded src dir

        cd "${R}/tmp/systemd-swap" || exit

        Unknown
    
PATCHES for:...

              r665
            
        # Get Verion

        VERSION=$(git tag | tail -n 1)

        #sed -i "s/DEB_NAME=.*/DEB_NAME=systemd-swap_all/g" "${R}/tmp/systemd-swap/package.sh"

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        # Build package

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        bash ./package.sh debian

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        Unknown
    
formating and dropbear fix for static ip

              r569
            
        # Change back into script root dir

        cd "${WORKDIR}" || exit

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        Unknown
    
formating and dropbear fix for static ip

              r569
            
        # Set permissions of the systemd-swap sources

        chown -R root:root "${R}/tmp/systemd-swap"

        # Install package - IMPROVE AND MAKE IT POSSIBLE WITHOUT VERSION NR.

        Unknown
    
PATCHES for:...

              r665
            
        chroot_exec dpkg -i /tmp/systemd-swap/systemd-swap_"$VERSION"_all.deb

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        # Enable service

        chroot_exec systemctl enable systemd-swap

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        # Remove temporary directory for systemd-swap sources

        rm -fr "${temp_dir}"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      else

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        # Enable ZSWAP in cmdline if systemd-swap is not used

        if [ "$KERNEL_ZSWAP" = true ] ; then

        Unknown
    
formating and dropbear fix for static ip

              r569
            
          CMDLINE="${CMDLINE} zswap.enabled=1 zswap.max_pool_percent=25 zswap.compressor=lz4"

        Unknown
    
kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...

              r502
            
        fi

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

        Unknown
    
formating and dropbear fix for static ip

              r569
            
        if [ "$KERNEL_SECURITY" = true ] ; then

          CMDLINE="${CMDLINE} apparmor=1 security=apparmor" 

        fi

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      # Install firmware boot cmdline

      echo "${CMDLINE}" > "${BOOT_DIR}/cmdline.txt"

      # Setup minimal GPU memory allocation size: 16MB (no X)

      if [ "$ENABLE_MINGPU" = true ] ; then

        vidal
    
Added choice to enable v3d graphics accelerator for Pi4...

              r762
            
        if [ "$ENABLE_GR_ACCEL" = false ]  ; then

          echo "gpu_mem=16" >> "${BOOT_DIR}/config.txt"

        else 

          ### Cannot reduce memory if graphics acceleration is requested

          echo "gpu_mem=128" >> "${BOOT_DIR}/config.txt"

        fi

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

      # Setup boot with initramfs

      if [ "$ENABLE_INITRAMFS" = true ] ; then

        echo "initramfs initramfs-${KERNEL_VERSION} followkernel" >> "${BOOT_DIR}/config.txt"

      fi

      # Create firmware configuration and cmdline symlinks

      ln -sf firmware/config.txt "${R}/boot/config.txt"

      ln -sf firmware/cmdline.txt "${R}/boot/cmdline.txt"

      # Install and setup kernel modules to load at boot

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
      mkdir -p "${LIB_DIR}/modules-load.d/"

      install_readonly files/modules/rpi2.conf "${LIB_DIR}/modules-load.d/rpi2.conf"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      # Load hardware random module at boot

      if [ "$ENABLE_HWRANDOM" = true ] && [ "$BUILD_KERNEL" = false ] ; then

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
        sed -i "s/^# bcm2708_rng/bcm2708_rng/" "${LIB_DIR}/modules-load.d/rpi2.conf"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

      # Load sound module at boot

      if [ "$ENABLE_SOUND" = true ] ; then

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
        sed -i "s/^# snd_bcm2835/snd_bcm2835/" "${LIB_DIR}/modules-load.d/rpi2.conf"

        drtyhlpr
    
Updated: Dropping privileges, chroot compiler install, dropbear sshd config

              r142
            
      else

        echo "dtparam=audio=off" >> "${BOOT_DIR}/config.txt"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

      # Enable I2C interface

      if [ "$ENABLE_I2C" = true ] ; then

        echo "dtparam=i2c_arm=on" >> "${BOOT_DIR}/config.txt"

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
        sed -i "s/^# i2c-bcm2708/i2c-bcm2708/" "${LIB_DIR}/modules-load.d/rpi2.conf"

        sed -i "s/^# i2c-dev/i2c-dev/" "${LIB_DIR}/modules-load.d/rpi2.conf"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      fi

      # Enable SPI interface

      if [ "$ENABLE_SPI" = true ] ; then

        echo "dtparam=spi=on" >> "${BOOT_DIR}/config.txt"

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
        echo "spi-bcm2708" >> "${LIB_DIR}/modules-load.d/rpi2.conf"

        Unknown
    
Fixing SPI on RPI 3B+

              r274
            
        if [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ]; then

        Unknown
    
add bluetooth firmware and systemd service...

              r368
            
          sed -i "s/spi-bcm2708/spi-bcm2835/" "${LIB_DIR}/modules-load.d/rpi2.conf"

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
        fi

      fi

        drtyhlpr
    
Added: Disable RPi2/3 under-volt warnings (from michaelfranzl PR)

              r130
            
      # Disable RPi2/3 under-voltage warnings

        Unknown
    
https://www.shellcheck.net/...

              r336
            
      if [ -n "$DISABLE_UNDERVOLT_WARNINGS" ] ; then

        drtyhlpr
    
Added: Disable RPi2/3 under-volt warnings (from michaelfranzl PR)

              r130
            
        echo "avoid_warnings=${DISABLE_UNDERVOLT_WARNINGS}" >> "${BOOT_DIR}/config.txt"

      fi

        vidal
    
Added choice to enable v3d graphics accelerator for Pi4...

              r762
            
      #Enable graphics acceleration for Model 4

      if [ "$RPI_MODEL" = 4 ] && [ "$ENABLE_GR_ACCEL" = true ] ; then

        echo "max_framebuffers=2" >> "${BOOT_DIR}/config.txt"

        echo "arm_64bit=1" >> "${BOOT_DIR}/config.txt"

        echo "cmdline=cmdline.txt" >> "${BOOT_DIR}/config.txt"

        echo "dtparam=audio=on" >> "${BOOT_DIR}/config.txt"

        if [ "$ENABLE_MINGPU" = false ] ; then

          echo "gpu_mem=128" >> "${BOOT_DIR}/config.txt"

        fi

        echo "dtoverlay=vc4-fkms-v3d, cma-128" >> "${BOOT_DIR}/config.txt"

      fi

        drtyhlpr
    
Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh

              r128
            
      # Install kernel modules blacklist

      mkdir -p "${ETC_DIR}/modprobe.d/"

      install_readonly files/modules/raspi-blacklist.conf "${ETC_DIR}/modprobe.d/raspi-blacklist.conf"

      # Install sysctl.d configuration files

      install_readonly files/sysctl.d/81-rpi-vm.conf "${ETC_DIR}/sysctl.d/81-rpi-vm.conf"

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Dépôts
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages

drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	#
vidal Added "4" in comments to indicate tha raspi4 is treated	r712	# Setup RPi2/3/4 config and cmdline
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	#

		# Load utility functions
		. ./functions.sh

Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	if [ -n "$RPI_FIRMWARE_DIR" ] && [ -d "$RPI_FIRMWARE_DIR" ] ; then
		# Install boot binaries from local directory
		cp "${RPI_FIRMWARE_DIR}"/boot/bootcode.bin "${BOOT_DIR}"/bootcode.bin
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup.dat "${BOOT_DIR}"/fixup.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup_cd.dat "${BOOT_DIR}"/fixup_cd.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup_x.dat "${BOOT_DIR}"/fixup_x.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/start.elf "${BOOT_DIR}"/start.elf
		cp "${RPI_FIRMWARE_DIR}"/boot/start_cd.elf "${BOOT_DIR}"/start_cd.elf
		cp "${RPI_FIRMWARE_DIR}"/boot/start_x.elf "${BOOT_DIR}"/start_x.elf
vidal proposal to add copy of fixup4* and start4* from firmware repository...	r710	cp "${RPI_FIRMWARE_DIR}"/boot/fixup4cd.dat "${BOOT_DIR}"/fixup4cd.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup4.dat "${BOOT_DIR}"/fixup4.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup4db.dat "${BOOT_DIR}"/fixup4db.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/fixup4x.dat "${BOOT_DIR}"/fixup4x.dat
		cp "${RPI_FIRMWARE_DIR}"/boot/start4cd.elf "${BOOT_DIR}"/start4cd.elf
		cp "${RPI_FIRMWARE_DIR}"/boot/start4db.elf "${BOOT_DIR}"/start4db.elf
		cp "${RPI_FIRMWARE_DIR}"/boot/start4.elf "${BOOT_DIR}"/start4x.elf
		cp "${RPI_FIRMWARE_DIR}"/boot/start4x.elf "${BOOT_DIR}"/start4x.elf
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	else
		# Create temporary directory for boot binaries
		temp_dir=$(as_nobody mktemp -d)

		# Install latest boot binaries from raspberry/firmware github
		as_nobody wget -q -O "${temp_dir}/bootcode.bin" "${FIRMWARE_URL}/bootcode.bin"
		as_nobody wget -q -O "${temp_dir}/fixup.dat" "${FIRMWARE_URL}/fixup.dat"
		as_nobody wget -q -O "${temp_dir}/fixup_cd.dat" "${FIRMWARE_URL}/fixup_cd.dat"
		as_nobody wget -q -O "${temp_dir}/fixup_x.dat" "${FIRMWARE_URL}/fixup_x.dat"
		as_nobody wget -q -O "${temp_dir}/start.elf" "${FIRMWARE_URL}/start.elf"
		as_nobody wget -q -O "${temp_dir}/start_cd.elf" "${FIRMWARE_URL}/start_cd.elf"
		as_nobody wget -q -O "${temp_dir}/start_x.elf" "${FIRMWARE_URL}/start_x.elf"
vidal proposal to add copy of fixup4* and start4* from firmware repository...	r710	as_nobody wget -q -O "${temp_dir}/fixup4cd.dat" "${FIRMWARE_URL}/fixup4cd.dat"
		as_nobody wget -q -O "${temp_dir}/fixup4.dat" "${FIRMWARE_URL}/fixup4.dat"
		as_nobody wget -q -O "${temp_dir}/fixup4db.dat" "${FIRMWARE_URL}/fixup4db.dat"
		as_nobody wget -q -O "${temp_dir}/fixup4x.dat" "${FIRMWARE_URL}/fixup4x.dat"
		as_nobody wget -q -O "${temp_dir}/start4cd.elf" "${FIRMWARE_URL}/start4cd.elf"
		as_nobody wget -q -O "${temp_dir}/start4db.elf" "${FIRMWARE_URL}/start4db.elf"
		as_nobody wget -q -O "${temp_dir}/start4x.elf" "${FIRMWARE_URL}/start4x.elf"
		as_nobody wget -q -O "${temp_dir}/start4x.elf" "${FIRMWARE_URL}/start4x.elf"
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502
		# Move downloaded boot binaries
		mv "${temp_dir}/"* "${BOOT_DIR}/"

		# Remove temporary directory for boot binaries
		rm -fr "${temp_dir}"

		# Set permissions of the boot binaries
		chown -R root:root "${BOOT_DIR}"
		chmod -R 600 "${BOOT_DIR}"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

		# Setup firmware boot cmdline
Unknown USBBOOT is Back...	r568	if [ "$ENABLE_USBBOOT" = true ] ; then
		CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	else
Unknown USBBOOT is Back...	r568	if [ "$ENABLE_SPLITFS" = true ] ; then
		CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda1 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"
		else
		CMDLINE="dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"
		fi
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

		# Add encrypted root partition to cmdline.txt
		if [ "$ENABLE_CRYPTFS" = true ] ; then
		if [ "$ENABLE_SPLITFS" = true ] ; then
Unknown https://www.shellcheck.net/...	r336	CMDLINE=$(echo "${CMDLINE}" \| sed "s/sda1/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda1:${CRYPTFS_MAPPING}/")
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	else
Unknown USBBOOT is Back...	r568	if [ "$ENABLE_USBBOOT" = true ] ; then
		CMDLINE=$(echo "${CMDLINE}" \| sed "s/sda2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda2:${CRYPTFS_MAPPING}/")
		else
		CMDLINE=$(echo "${CMDLINE}" \| sed "s/mmcblk0p2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/mmcblk0p2:${CRYPTFS_MAPPING}/")
		fi
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi
		fi

Unknown Dropbear initramfs...	r501	# Enable Kernel messages on standard output
Unknown Bluetooth and serial...	r451	if [ "$ENABLE_PRINTK" = true ] ; then
		install_readonly files/sysctl.d/83-rpi-printk.conf "${ETC_DIR}/sysctl.d/83-rpi-printk.conf"
		fi

Unknown USBBOOT is Back...	r568	# Enable Kernel messages on standard output
		if [ "$KERNEL_SECURITY" = true ] ; then
		install_readonly files/sysctl.d/84-rpi-ASLR.conf "${ETC_DIR}/sysctl.d/84-rpi-ASLR.conf"
		fi

Unknown Dropbear initramfs...	r501	# Install udev rule for serial alias - serial0 = console serial1=bluetooth
Unknown Bluetooth and serial...	r451	install_readonly files/etc/99-com.rules "${LIB_DIR}/udev/rules.d/99-com.rules"

Unknown Dropbear initramfs...	r501	# Remove IPv6 networking support
		if [ "$ENABLE_IPV6" = false ] ; then
		CMDLINE="${CMDLINE} ipv6.disable=1"
		fi

		# Automatically assign predictable network interface names
		if [ "$ENABLE_IFNAMES" = false ] ; then
		CMDLINE="${CMDLINE} net.ifnames=0"
		else
		CMDLINE="${CMDLINE} net.ifnames=1"
		fi

drtyhlpr Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT	r539	# Disable Raspberry Pi console logo
		if [ "$ENABLE_LOGO" = false ] ; then
		CMDLINE="${CMDLINE} logo.nologo"
		fi

		# Strictly limit verbosity of boot up console messages
		if [ "$ENABLE_SILENT_BOOT" = true ] ; then
		CMDLINE="${CMDLINE} quiet loglevel=0 rd.systemd.show_status=auto rd.udev.log_priority=0"
		fi

Unknown Dropbear initramfs...	r501	# Install firmware config
		install_readonly files/boot/config.txt "${BOOT_DIR}/config.txt"

drtyhlpr Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT	r539	# Disable Raspberry Pi console logo
Vincent KULAK Fix #218 typo	r740	if [ "$ENABLE_SPLASH" = false ] ; then
drtyhlpr Added: ENABLE_SPLASH,LOGO, and SILENT_BOOT	r539	echo "disable_splash=1" >> "${BOOT_DIR}/config.txt"
		fi

Unknown Dropbear initramfs...	r501	# Locks CPU frequency at maximum
		if [ "$ENABLE_TURBO" = true ] ; then
		echo "force_turbo=1" >> "${BOOT_DIR}/config.txt"
		# helps to avoid sdcard corruption when force_turbo is enabled.
		echo "boot_delay=1" >> "${BOOT_DIR}/config.txt"
		fi

Unknown PATCHES for:...	r665	if [ "$RPI_MODEL" = 0 ] \|\| [ "$RPI_MODEL" = 3 ] \|\| [ "$RPI_MODEL" = 3P ] \|\| [ "$RPI_MODEL" = 4 ]; then
Unknown - remove some whitespace...	r521
Unknown Bluetooth and serial...	r451	# Bluetooth enabled
		if [ "$ENABLE_BLUETOOTH" = true ] ; then
		# Create temporary directory for Bluetooth sources
		temp_dir=$(as_nobody mktemp -d)

		# Fetch Bluetooth sources
		as_nobody git -C "${temp_dir}" clone "${BLUETOOTH_URL}"

		# Copy downloaded sources
		mv "${temp_dir}/pi-bluetooth" "${R}/tmp/"

		# Set permissions
		chown -R root:root "${R}/tmp/pi-bluetooth"
Unknown PATCHES for:...	r665
		# Bluetooth firmware from arch aur https://aur.archlinux.org/packages/pi-bluetooth/
		wget -q -O "${R}/tmp/pi-bluetooth/LICENCE.broadcom_bcm43xx" https://aur.archlinux.org/cgit/aur.git/plain/LICENCE.broadcom_bcm43xx?h=pi-bluetooth
		wget -q -O "${R}/tmp/pi-bluetooth/BCM43430A1.hcd" https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/master/broadcom/BCM43430A1.hcd
Unknown Bluetooth and serial...	r451
		# Install tools
		install_readonly "${R}/tmp/pi-bluetooth/usr/bin/btuart" "${R}/usr/bin/btuart"
		install_readonly "${R}/tmp/pi-bluetooth/usr/bin/bthelper" "${R}/usr/bin/bthelper"
Unknown - remove some whitespace...	r521
Unknown Dropbear initramfs...	r501	# make scripts executable
		chmod +x "${R}/usr/bin/bthelper"
		chmod +x "${R}/usr/bin/btuart"
Unknown Bluetooth and serial...	r451
		# Install bluetooth udev rule
		install_readonly "${R}/tmp/pi-bluetooth/lib/udev/rules.d/90-pi-bluetooth.rules" "${LIB_DIR}/udev/rules.d/90-pi-bluetooth.rules"

		# Install Firmware Flash file and apropiate licence
		mkdir -p "$BLUETOOTH_FIRMWARE_DIR"
		install_readonly "${R}/tmp/pi-bluetooth/LICENCE.broadcom_bcm43xx" "${BLUETOOTH_FIRMWARE_DIR}/LICENCE.broadcom_bcm43xx"
Michał Ciołek Fix filename for BCM43430A1.hcd	r587	install_readonly "${R}/tmp/pi-bluetooth/BCM43430A1.hcd" "${BLUETOOTH_FIRMWARE_DIR}/BCM43430A1.hcd"
Unknown Bluetooth and serial...	r451	install_readonly "${R}/tmp/pi-bluetooth/debian/pi-bluetooth.bthelper@.service" "${ETC_DIR}/systemd/system/pi-bluetooth.bthelper@.service"
		install_readonly "${R}/tmp/pi-bluetooth/debian/pi-bluetooth.hciuart.service" "${ETC_DIR}/systemd/system/pi-bluetooth.hciuart.service"
Unknown - remove some whitespace...	r521
Unknown Dropbear initramfs...	r501	# Remove temporary directories
Unknown Bluetooth and serial...	r451	rm -fr "${temp_dir}"
Unknown Dropbear initramfs...	r501	rm -fr "${R}"/tmp/pi-bluetooth
Unknown - remove some whitespace...	r521
Unknown Bluetooth and serial...	r451	# Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 & 15. Slow Bluetooth and slow cpu. Use /dev/ttyS0 instead of /dev/ttyAMA0
		if [ "$ENABLE_MINIUART_OVERLAY" = true ] ; then
		# set overlay to swap ttyAMA0 and ttyS0
		echo "dtoverlay=pi3-miniuart-bt" >> "${BOOT_DIR}/config.txt"

		if [ "$ENABLE_TURBO" = false ] ; then
Unknown formating and dropbear fix for static ip	r569	echo "core_freq=250" >> "${BOOT_DIR}/config.txt"
		fi

Unknown Bluetooth and serial...	r451	fi
Unknown - remove some whitespace...	r521
Unknown Dropbear initramfs...	r501	# Activate services
		chroot_exec systemctl enable pi-bluetooth.hciuart.service
Unknown - remove some whitespace...	r521
Unknown Bluetooth and serial...	r451	else # if ENABLE_BLUETOOTH = false
		# set overlay to disable bluetooth
		echo "dtoverlay=pi3-disable-bt" >> "${BOOT_DIR}/config.txt"
		fi # ENABLE_BLUETOOTH end
		fi

		# may need sudo systemctl disable hciuart
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	if [ "$ENABLE_CONSOLE" = true ] ; then
Unknown -Enable_nonfree no longer enables non-free packages while install. now it enables non free packacges in sources.list...	r732	echo "enable_uart=1" >> "${BOOT_DIR}/config.txt"
		#More debug output on early but with serial console
		echo "uart_2ndstage=1" >> "${BOOT_DIR}/config.txt"

Unknown Bluetooth and serial...	r451	# add string to cmdline
		CMDLINE="${CMDLINE} console=serial0,115200"
Unknown formating and dropbear fix for static ip	r569
		if [ "$RPI_MODEL" = 3 ] \|\| [ "$RPI_MODEL" = 3P ]\|\| [ "$RPI_MODEL" = 0 ]; then
		# if force_turbo didn't lock cpu at high speed, lock it at low speed (XOR logic) or miniuart will be broken
		if [ "$ENABLE_TURBO" = false ] ; then
		echo "core_freq=250" >> "${BOOT_DIR}/config.txt"
		fi
		fi
Unknown - remove some whitespace...	r521
Unknown Bluetooth and serial...	r451	# Enable serial console systemd style
Unknown formating and dropbear fix for static ip	r569	chroot_exec systemctl enable serial-getty@serial0.service
Unknown Bluetooth and serial...	r451	else
		echo "enable_uart=0" >> "${BOOT_DIR}/config.txt"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

Yannick Schinko Disable dphys-swapfile for the first boot	r577	# Disable dphys-swapfile service. Will get enabled on first boot
		if [ "$ENABLE_DPHYSSWAP" = true ] ; then
		chroot_exec systemctl disable dphys-swapfile
		fi

Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	if [ "$ENABLE_SYSTEMDSWAP" = true ] ; then
		# Create temporary directory for systemd-swap sources
		temp_dir=$(as_nobody mktemp -d)
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	# Fetch systemd-swap sources
		as_nobody git -C "${temp_dir}" clone "${SYSTEMDSWAP_URL}"

		# Copy downloaded systemd-swap sources
		mv "${temp_dir}/systemd-swap" "${R}/tmp/"

		# Change into downloaded src dir
		cd "${R}/tmp/systemd-swap" \|\| exit
Unknown PATCHES for:...	r665
		# Get Verion
		VERSION=$(git tag \| tail -n 1)
		#sed -i "s/DEB_NAME=.*/DEB_NAME=systemd-swap_all/g" "${R}/tmp/systemd-swap/package.sh"

Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	# Build package
Unknown formating and dropbear fix for static ip	r569	bash ./package.sh debian
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502
Unknown formating and dropbear fix for static ip	r569	# Change back into script root dir
		cd "${WORKDIR}" \|\| exit
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502
Unknown formating and dropbear fix for static ip	r569	# Set permissions of the systemd-swap sources
		chown -R root:root "${R}/tmp/systemd-swap"

		# Install package - IMPROVE AND MAKE IT POSSIBLE WITHOUT VERSION NR.
Unknown PATCHES for:...	r665	chroot_exec dpkg -i /tmp/systemd-swap/systemd-swap_"$VERSION"_all.deb
Unknown formating and dropbear fix for static ip	r569
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	# Enable service
		chroot_exec systemctl enable systemd-swap

Unknown formating and dropbear fix for static ip	r569	# Remove temporary directory for systemd-swap sources
		rm -fr "${temp_dir}"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	else
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	# Enable ZSWAP in cmdline if systemd-swap is not used
		if [ "$KERNEL_ZSWAP" = true ] ; then
Unknown formating and dropbear fix for static ip	r569	CMDLINE="${CMDLINE} zswap.enabled=1 zswap.max_pool_percent=25 zswap.compressor=lz4"
Unknown kernel features + nexmon monitor mode wlan patch(kali-kernel) with RPI3,RPI3B+ firmware patch...	r502	fi
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi
Unknown formating and dropbear fix for static ip	r569	if [ "$KERNEL_SECURITY" = true ] ; then
		CMDLINE="${CMDLINE} apparmor=1 security=apparmor"
		fi
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128
		# Install firmware boot cmdline
		echo "${CMDLINE}" > "${BOOT_DIR}/cmdline.txt"

		# Setup minimal GPU memory allocation size: 16MB (no X)
		if [ "$ENABLE_MINGPU" = true ] ; then
vidal Added choice to enable v3d graphics accelerator for Pi4...	r762	if [ "$ENABLE_GR_ACCEL" = false ] ; then
		echo "gpu_mem=16" >> "${BOOT_DIR}/config.txt"
		else
		### Cannot reduce memory if graphics acceleration is requested
		echo "gpu_mem=128" >> "${BOOT_DIR}/config.txt"
		fi
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

		# Setup boot with initramfs
		if [ "$ENABLE_INITRAMFS" = true ] ; then
		echo "initramfs initramfs-${KERNEL_VERSION} followkernel" >> "${BOOT_DIR}/config.txt"
		fi

		# Create firmware configuration and cmdline symlinks
		ln -sf firmware/config.txt "${R}/boot/config.txt"
		ln -sf firmware/cmdline.txt "${R}/boot/cmdline.txt"

		# Install and setup kernel modules to load at boot
Unknown add bluetooth firmware and systemd service...	r368	mkdir -p "${LIB_DIR}/modules-load.d/"
		install_readonly files/modules/rpi2.conf "${LIB_DIR}/modules-load.d/rpi2.conf"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128
		# Load hardware random module at boot
		if [ "$ENABLE_HWRANDOM" = true ] && [ "$BUILD_KERNEL" = false ] ; then
Unknown add bluetooth firmware and systemd service...	r368	sed -i "s/^# bcm2708_rng/bcm2708_rng/" "${LIB_DIR}/modules-load.d/rpi2.conf"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

		# Load sound module at boot
		if [ "$ENABLE_SOUND" = true ] ; then
Unknown add bluetooth firmware and systemd service...	r368	sed -i "s/^# snd_bcm2835/snd_bcm2835/" "${LIB_DIR}/modules-load.d/rpi2.conf"
drtyhlpr Updated: Dropping privileges, chroot compiler install, dropbear sshd config	r142	else
		echo "dtparam=audio=off" >> "${BOOT_DIR}/config.txt"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

		# Enable I2C interface
		if [ "$ENABLE_I2C" = true ] ; then
		echo "dtparam=i2c_arm=on" >> "${BOOT_DIR}/config.txt"
Unknown add bluetooth firmware and systemd service...	r368	sed -i "s/^# i2c-bcm2708/i2c-bcm2708/" "${LIB_DIR}/modules-load.d/rpi2.conf"
		sed -i "s/^# i2c-dev/i2c-dev/" "${LIB_DIR}/modules-load.d/rpi2.conf"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi

		# Enable SPI interface
		if [ "$ENABLE_SPI" = true ] ; then
		echo "dtparam=spi=on" >> "${BOOT_DIR}/config.txt"
Unknown add bluetooth firmware and systemd service...	r368	echo "spi-bcm2708" >> "${LIB_DIR}/modules-load.d/rpi2.conf"
Unknown Fixing SPI on RPI 3B+	r274	if [ "$RPI_MODEL" = 3 ] \|\| [ "$RPI_MODEL" = 3P ]; then
Unknown add bluetooth firmware and systemd service...	r368	sed -i "s/spi-bcm2708/spi-bcm2835/" "${LIB_DIR}/modules-load.d/rpi2.conf"
drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	fi
		fi

drtyhlpr Added: Disable RPi2/3 under-volt warnings (from michaelfranzl PR)	r130	# Disable RPi2/3 under-voltage warnings
Unknown https://www.shellcheck.net/...	r336	if [ -n "$DISABLE_UNDERVOLT_WARNINGS" ] ; then
drtyhlpr Added: Disable RPi2/3 under-volt warnings (from michaelfranzl PR)	r130	echo "avoid_warnings=${DISABLE_UNDERVOLT_WARNINGS}" >> "${BOOT_DIR}/config.txt"
		fi

vidal Added choice to enable v3d graphics accelerator for Pi4...	r762	#Enable graphics acceleration for Model 4
		if [ "$RPI_MODEL" = 4 ] && [ "$ENABLE_GR_ACCEL" = true ] ; then
		echo "max_framebuffers=2" >> "${BOOT_DIR}/config.txt"
		echo "arm_64bit=1" >> "${BOOT_DIR}/config.txt"
		echo "cmdline=cmdline.txt" >> "${BOOT_DIR}/config.txt"
		echo "dtparam=audio=on" >> "${BOOT_DIR}/config.txt"
		if [ "$ENABLE_MINGPU" = false ] ; then
		echo "gpu_mem=128" >> "${BOOT_DIR}/config.txt"
		fi
		echo "dtoverlay=vc4-fkms-v3d, cma-128" >> "${BOOT_DIR}/config.txt"
		fi


drtyhlpr Updated: Moved RPi2/3 related configs to new file 14-rpi-config.sh	r128	# Install kernel modules blacklist
		mkdir -p "${ETC_DIR}/modprobe.d/"
		install_readonly files/modules/raspi-blacklist.conf "${ETC_DIR}/modprobe.d/raspi-blacklist.conf"

		# Install sysctl.d configuration files
		install_readonly files/sysctl.d/81-rpi-vm.conf "${ETC_DIR}/sysctl.d/81-rpi-vm.conf"