Raspi2-3_GenImage Commit - r363:0f037155f0ec · Collaboration Tremplin des Sciences

Merge pull request #4 from drtyhlpr/master...

burnbabyburn -

r363:0f037155f0ec

parent child

Context file:

r363:0f037155f0ec

Collapse all files

bootstrap.d/16-videocore.sh created 644 +33 0

@@ -0,0 +1,33
	1	#
	2	# Setup videocore - Raspberry Userland
	3	#
	4
	5	# Load utility functions
	6	. ./functions.sh
	7
	8	if [ "$ENABLE_VIDEOCORE" = true ] ; then
	9	# Copy existing videocore sources into chroot directory
	10	if [ -n "$VIDEOCORESRC_DIR" ] && [ -d "$VIDEOCORESRC_DIR" ] ; then
	11	# Copy local U-Boot sources
	12	cp -r "${VIDEOCORESRC_DIR}" "${R}/tmp"
	13	else
	14	# Create temporary directory for U-Boot sources
	15	temp_dir=$(as_nobody mktemp -d)
	16
	17	# Fetch U-Boot sources
	18	as_nobody git -C "${temp_dir}" clone "${VIDEOCORE_URL}"
	19
	20	# Copy downloaded U-Boot sources
	21	mv "${temp_dir}/userland" "${R}/tmp/"
	22
	23	# Set permissions of the U-Boot sources
	24	chown -R root:root "${R}/tmp/userland"
	25
	26	# Remove temporary directory for U-Boot sources
	27	rm -fr "${temp_dir}"
	28	fi
	29
	30	cmake -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_BUILD_TYPE=release -DARM64=ON -DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc -DCMAKE_CXX_COMPILER=aarch64-linux-gnu-g++ -DCMAKE_ASM_COMPILER=aarch64-linux-gnu-gcc -DVIDEOCORE_BUILD_DIR="${R}"/opt/vc
	31	make -j "$(nproc)"
	32	chroot_exec PATH="${PATH}":/opt/vc/bin
	33	fi

README.md +6 0

             ##### `FBTURBOSRC_DIR`=""
             Path to a directory (`xf86-video-fbturbo`) of [hardware accelerated Xorg video driver sources](https://github.com/ssvb/xf86-video-fbturbo) that will be copied, configured, build and installed inside the chroot.
+            ##### `ENABLE_VIDEOCORE`=false
+            Install and enable the [Source code for ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) `vcgencmd`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling.
+            ##### `VIDEOCORESRC_DIR`=""
+            Path to a directory (`userland`) of [Source code for ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) that will be copied, configured, build and installed inside the chroot.
             ##### `ENABLE_IPTABLES`=false
             Enable iptables IPv4/IPv6 firewall. Simplified ruleset: Allow all outgoing connections. Block all incoming connections except to OpenSSH service.

bootstrap.d/10-bootstrap.sh +1 -1

             fi
             # Base debootstrap (unpack only)
-            http_proxy=${APT_PROXY} debootstrap ${APT_EXCLUDES} --arch="${RELEASE_ARCH}" --foreign ${VARIANT} --components="${COMPONENTS}" --include="${APT_INCLUDES}" "${RELEASE}" "${R}" "http://${APT_SERVER}/debian"
+            http_proxy=${APT_PROXY} debootstrap "${APT_EXCLUDES}" --arch="${RELEASE_ARCH}" --foreign ${VARIANT} --components="${COMPONENTS}" --include="${APT_INCLUDES}" "${RELEASE}" "${R}" "http://${APT_SERVER}/debian"
             # Copy qemu emulator binary to chroot
             install -m 755 -o root -g root "${QEMU_BINARY}" "${R}${QEMU_BINARY}"

bootstrap.d/11-apt.sh +3 -3

             chroot_exec apt-get -qq -y -u dist-upgrade
             if [ "$APT_INCLUDES_LATE" ] ; then
-              chroot_exec apt-get -qq -y install $(echo $APT_INCLUDES_LATE |tr , ' ')
+              chroot_exec apt-get -qq -y install "$(echo "$APT_INCLUDES_LATE" |tr , ' ')"
             fi
             if [ -d packages ] ; then
               for package in packages/*.deb ; do
-                cp $package ${R}/tmp
+                cp "$package" "${R}"/tmp
-                chroot_exec dpkg --unpack /tmp/$(basename $package)
+                chroot_exec dpkg --unpack /tmp/"$(basename "$package")"
               done
             fi
             chroot_exec apt-get -qq -y -f install

bootstrap.d/12-locale.sh +2 -2

             . ./functions.sh
             # Install and setup timezone
-            echo ${TIMEZONE} > "${ETC_DIR}/timezone"
+            echo "${TIMEZONE}" > "${ETC_DIR}/timezone"
             chroot_exec dpkg-reconfigure -f noninteractive tzdata
             # Install and setup default locale and keyboard configuration
-            if [ $(echo "$APT_INCLUDES" | grep ",locales") ] ; then
+            if [ "$(echo "$APT_INCLUDES" | grep ",locales")" ] ; then
               # Set locale choice in debconf db, even though dpkg-reconfigure ignores and overwrites them due to some bug
               # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=684134 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=685957
               # ... so we have to set locales manually

bootstrap.d/13-kernel.sh +33 -31

             # Fetch and build latest raspberry kernel
             if [ "$BUILD_KERNEL" = true ] ; then
               # Setup source directory
-              mkdir -p "${R}/usr/src/linux"
+              mkdir -p "${KERNEL_DIR}"
               # Copy existing kernel sources into chroot directory
               if [ -n "$KERNELSRC_DIR" ] && [ -d "$KERNELSRC_DIR" ] ; then
                 # Copy kernel sources and include hidden files
-                cp -r "${KERNELSRC_DIR}/". "${R}/usr/src/linux"
+                cp -r "${KERNELSRC_DIR}/". "${KERNEL_DIR}"
                 # Clean the kernel sources
                 if [ "$KERNELSRC_CLEAN" = true ] && [ "$KERNELSRC_PREBUILT" = false ] ; then
                 fi
                 # Copy downloaded kernel sources
-                cp -r "${temp_dir}/linux/"* "${R}/usr/src/linux/"
+                cp -r "${temp_dir}/linux/"* "${KERNEL_DIR}"
                 # Remove temporary directory for kernel sources
                 rm -fr "${temp_dir}"
                   # Set kernel configuration parameters to enable qemu emulation
                   if [ "$ENABLE_QEMU" = true ] ; then
-                    echo "CONFIG_FHANDLE=y" >> ${KERNEL_DIR}/.config
+                    echo "CONFIG_FHANDLE=y" >> "${KERNEL_DIR}"/.config
-                    echo "CONFIG_LBDAF=y" >> ${KERNEL_DIR}/.config
+                    echo "CONFIG_LBDAF=y" >> "${KERNEL_DIR}"/.config
                     if [ "$ENABLE_CRYPTFS" = true ] ; then
-                      echo "CONFIG_EMBEDDED=y" >> ${KERNEL_DIR}/.config
-                      echo "CONFIG_EXPERT=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_EMBEDDED=y"
-                      echo "CONFIG_DAX=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_EXPERT=y"
-                      echo "CONFIG_MD=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_DAX=y"
-                      echo "CONFIG_BLK_DEV_MD=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_MD=y"
-                      echo "CONFIG_MD_AUTODETECT=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_BLK_DEV_MD=y"
-                      echo "CONFIG_BLK_DEV_DM=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_MD_AUTODETECT=y"
-                      echo "CONFIG_BLK_DEV_DM_BUILTIN=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_BLK_DEV_DM=y"
-                      echo "CONFIG_DM_CRYPT=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_BLK_DEV_DM_BUILTIN=y"
-                      echo "CONFIG_CRYPTO_BLKCIPHER=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_DM_CRYPT=y"
-                      echo "CONFIG_CRYPTO_CBC=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_CRYPTO_BLKCIPHER=y"
-                      echo "CONFIG_CRYPTO_XTS=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_CRYPTO_CBC=y"
-                      echo "CONFIG_CRYPTO_SHA512=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_CRYPTO_XTS=y"
-                      echo "CONFIG_CRYPTO_MANAGER=y" >> ${KERNEL_DIR}/.config
+                        echo "CONFIG_CRYPTO_SHA512=y"
+                        echo "CONFIG_CRYPTO_MANAGER=y"
+                      } >> ${KERNEL_DIR}/.config
                     fi
                   fi
                   # Copy custom kernel configuration file
-                  if [ ! -z "$KERNELSRC_USRCONFIG" ] ; then
+                  if [ -n "$KERNELSRC_USRCONFIG" ] ; then
-                    cp $KERNELSRC_USRCONFIG ${KERNEL_DIR}/.config
+                    cp "$KERNELSRC_USRCONFIG" "${KERNEL_DIR}"/.config
                   fi
                   # Set kernel configuration parameters to their default values
                 fi
                 # Cross compile kernel and dtbs
-                make -C "${KERNEL_DIR}" -j${KERNEL_THREADS} ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" CC="${cc}" "${KERNEL_BIN_IMAGE}" dtbs
+                make -C "${KERNEL_DIR}" -j"${KERNEL_THREADS}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" CC="${cc}" "${KERNEL_BIN_IMAGE}" dtbs
                 # Cross compile kernel modules
-                if [ $(grep "CONFIG_MODULES=y" "${KERNEL_DIR}/.config") ] ; then
+                if [ "$(grep "CONFIG_MODULES=y" "${KERNEL_DIR}/.config")" ] ; then
-                  make -C "${KERNEL_DIR}" -j${KERNEL_THREADS} ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" CC="${cc}" modules
+                  make -C "${KERNEL_DIR}" -j"${KERNEL_THREADS}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" CC="${cc}" modules
                 fi
               fi
               # Install kernel modules
               if [ "$ENABLE_REDUCE" = true ] ; then
-                if [ $(grep "CONFIG_MODULES=y" "${KERNEL_DIR}/.config") ] ; then
+                if [ "$(grep "CONFIG_MODULES=y" "${KERNEL_DIR}/.config")" ] ; then
                   make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=../../.. modules_install
                 fi
               else
-                if [ $(grep "CONFIG_MODULES=y" "${KERNEL_DIR}/.config") ] ; then
+                if [ "$(grep "CONFIG_MODULES=y" "${KERNEL_DIR}/.config")" ] ; then
                   make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" INSTALL_MOD_PATH=../../.. modules_install
                 fi
                 # Install kernel firmware
-                if [ $(grep "^firmware_install:" "${KERNEL_DIR}/Makefile") ] ; then
+                if [ "$(grep "^firmware_install:" "${KERNEL_DIR}/Makefile")" ] ; then
                   make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" INSTALL_FW_PATH=../../../lib firmware_install
                 fi
               fi
               mkdir "${BOOT_DIR}"
               # Get kernel release version
-              KERNEL_VERSION=`cat "${KERNEL_DIR}/include/config/kernel.release"`
+              KERNEL_VERSION=$(cat "${KERNEL_DIR}/include/config/kernel.release")
               # Copy kernel configuration file to the boot directory
               install_readonly "${KERNEL_DIR}/.config" "${R}/boot/config-${KERNEL_VERSION}"
                 rm -fr "${KERNEL_DIR}"
               else
                 # Prepare compiled kernel modules
-                if [ $(grep "CONFIG_MODULES=y" "${KERNEL_DIR}/.config") ] ; then
+                if [ "$(grep "CONFIG_MODULES=y" "${KERNEL_DIR}/.config")" ] ; then
-                  if [ $(grep "^modules_prepare:" "${KERNEL_DIR}/Makefile") ] ; then
+                  if [ "$(grep "^modules_prepare:" "${KERNEL_DIR}/Makefile")" ] ; then
                     make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" modules_prepare
                   fi
               chroot_exec apt-get -qq -y install flash-kernel
               # Check if kernel installation was successful
-              VMLINUZ="$(ls -1 ${R}/boot/vmlinuz-* | sort | tail -n 1)"
+              VMLINUZ="$(ls -1 "${R}"/boot/vmlinuz-* | sort | tail -n 1)"
               if [ -z "$VMLINUZ" ] ; then
                 echo "error: kernel installation failed! (/boot/vmlinuz-* not found)"
                 cleanup

bootstrap.d/14-fstab.sh +1 -1

                 printf "#\n# CRYPTSETUP: [ y | n ]\n#\n\nCRYPTSETUP=y\n" >> "${ETC_DIR}/initramfs-tools/conf-hook"
                 # Dummy mapping required by mkinitramfs
-                echo "0 1 crypt $(echo ${CRYPTFS_CIPHER} | cut -d ':' -f 1) ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff 0 7:0 4096" | chroot_exec dmsetup create "${CRYPTFS_MAPPING}"
+                echo "0 1 crypt $(echo "${CRYPTFS_CIPHER}" | cut -d ':' -f 1) ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff 0 7:0 4096" | chroot_exec dmsetup create "${CRYPTFS_MAPPING}"
                 # Generate initramfs with encrypted root partition support
                 chroot_exec mkinitramfs -o "/boot/firmware/initramfs-${KERNEL_VERSION}" "${KERNEL_VERSION}"

bootstrap.d/15-rpi-config.sh +10 -10

             if [ "$BUILD_KERNEL" = true ] ; then
               if [ -n "$RPI_FIRMWARE_DIR" ] && [ -d "$RPI_FIRMWARE_DIR" ] ; then
                 # Install boot binaries from local directory
-                cp ${RPI_FIRMWARE_DIR}/boot/bootcode.bin ${BOOT_DIR}/bootcode.bin
+                cp "${RPI_FIRMWARE_DIR}"/boot/bootcode.bin "${BOOT_DIR}"/bootcode.bin
-                cp ${RPI_FIRMWARE_DIR}/boot/fixup.dat ${BOOT_DIR}/fixup.dat
+                cp "${RPI_FIRMWARE_DIR}"/boot/fixup.dat "${BOOT_DIR}"/fixup.dat
-                cp ${RPI_FIRMWARE_DIR}/boot/fixup_cd.dat ${BOOT_DIR}/fixup_cd.dat
+                cp "${RPI_FIRMWARE_DIR}"/boot/fixup_cd.dat "${BOOT_DIR}"/fixup_cd.dat
-                cp ${RPI_FIRMWARE_DIR}/boot/fixup_x.dat ${BOOT_DIR}/fixup_x.dat
+                cp "${RPI_FIRMWARE_DIR}"/boot/fixup_x.dat "${BOOT_DIR}"/fixup_x.dat
-                cp ${RPI_FIRMWARE_DIR}/boot/start.elf ${BOOT_DIR}/start.elf
+                cp "${RPI_FIRMWARE_DIR}"/boot/start.elf "${BOOT_DIR}"/start.elf
-                cp ${RPI_FIRMWARE_DIR}/boot/start_cd.elf ${BOOT_DIR}/start_cd.elf
+                cp "${RPI_FIRMWARE_DIR}"/boot/start_cd.elf "${BOOT_DIR}"/start_cd.elf
-                cp ${RPI_FIRMWARE_DIR}/boot/start_x.elf ${BOOT_DIR}/start_x.elf
+                cp "${RPI_FIRMWARE_DIR}"/boot/start_x.elf "${BOOT_DIR}"/start_x.elf
               else
                 # Create temporary directory for boot binaries
                 temp_dir=$(as_nobody mktemp -d)
             # Add encrypted root partition to cmdline.txt
             if [ "$ENABLE_CRYPTFS" = true ] ; then
               if [ "$ENABLE_SPLITFS" = true ] ; then
-                CMDLINE=$(echo ${CMDLINE} | sed "s/sda1/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda1:${CRYPTFS_MAPPING}/")
+                CMDLINE=$(echo "${CMDLINE}" | sed "s/sda1/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda1:${CRYPTFS_MAPPING}/")
               else
-                CMDLINE=$(echo ${CMDLINE} | sed "s/mmcblk0p2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/mmcblk0p2:${CRYPTFS_MAPPING}/")
+                CMDLINE=$(echo "${CMDLINE}" | sed "s/mmcblk0p2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/mmcblk0p2:${CRYPTFS_MAPPING}/")
               fi
             fi
             fi
             # Disable RPi2/3 under-voltage warnings
-            if [ ! -z "$DISABLE_UNDERVOLT_WARNINGS" ] ; then
+            if [ -n "$DISABLE_UNDERVOLT_WARNINGS" ] ; then
               echo "avoid_warnings=${DISABLE_UNDERVOLT_WARNINGS}" >> "${BOOT_DIR}/config.txt"
             fi

bootstrap.d/20-networking.sh +3 -3

             fi
             # Enable time sync
-            if [ "NET_NTP_1" != "" ] ; then
+            if [ "$NET_NTP_1" != "" ] ; then
               chroot_exec systemctl enable systemd-timesyncd.service
             fi
             # Download the firmware binary blob required to use the RPi3 wireless interface
             if [ "$ENABLE_WIRELESS" = true ] ; then
-              if [ ! -d ${WLAN_FIRMWARE_DIR} ] ; then
+              if [ ! -d "${WLAN_FIRMWARE_DIR}" ] ; then
-            	mkdir -p ${WLAN_FIRMWARE_DIR}
+            	mkdir -p "${WLAN_FIRMWARE_DIR}"
               fi
               # Create temporary directory for firmware binary blob

bootstrap.d/21-firewall.sh +4 -3

               # Create iptables configuration directory
               mkdir -p "${ETC_DIR}/iptables"
-              # make sure iptables-legacy,iptables-legacy-restore and iptables-legacy-save are the used alternatives
+              # make sure iptables-legacy is the used alternatives
+              #iptables-save and -restore are slaves of iptables and thus are set accordingly
+              if ! [ "$RELEASE" = jessie ] ; then
             	chroot_exec update-alternatives --verbose --set iptables /usr/sbin/iptables-legacy
-              chroot_exec update-alternatives --verbose --set iptables-save /usr/sbin/iptables-legacy-save
+              fi
-              chroot_exec update-alternatives --verbose --set iptables-restore /usr/sbin/iptables-legacy-restore
               # Install iptables systemd service
               install_readonly files/iptables/iptables.service "${ETC_DIR}/systemd/system/iptables.service"

bootstrap.d/30-security.sh +2 -2

             . ./functions.sh
             # Generate crypt(3) password string
-            ENCRYPTED_PASSWORD=`mkpasswd -m sha-512 "${PASSWORD}"`
+            ENCRYPTED_PASSWORD=$(mkpasswd -m sha-512 "${PASSWORD}")
-            ENCRYPTED_USER_PASSWORD=`mkpasswd -m sha-512 "${USER_PASSWORD}"`
+            ENCRYPTED_USER_PASSWORD=$(mkpasswd -m sha-512 "${USER_PASSWORD}")
             # Setup default user
             if [ "$ENABLE_USER" = true ] ; then

bootstrap.d/32-sshd.sh +5 -5

                 fi
                 # Add SSH (v2) public key for user root
-                if [ ! -z "$SSH_ROOT_PUB_KEY" ] ; then
+                if [ -n "$SSH_ROOT_PUB_KEY" ] ; then
                   # Create root SSH config directory
                   mkdir -p "${R}/root/.ssh"
               if [ "$ENABLE_USER" = true ] ; then
                 # Add SSH (v2) public key for user $USER_NAME
-                if [ ! -z "$SSH_USER_PUB_KEY" ] ; then
+                if [ -n "$SSH_USER_PUB_KEY" ] ; then
                   # Create $USER_NAME SSH config directory
                   mkdir -p "${R}/home/${USER_NAME}/.ssh"
                   # Set permissions of $USER_NAME SSH config directory
                   chroot_exec chmod 700 "/home/${USER_NAME}/.ssh"
-                  chroot_exec chown ${USER_NAME}:${USER_NAME} "/home/${USER_NAME}/.ssh"
+                  chroot_exec chown "${USER_NAME}":"${USER_NAME}" "/home/${USER_NAME}/.ssh"
                   # Add SSH (v2) public key(s) to authorized_keys file
                   cat "$SSH_USER_PUB_KEY" >> "${R}/home/${USER_NAME}/.ssh/authorized_keys"
                   # Set permissions of $USER_NAME SSH config directory
                   chroot_exec chmod 600 "/home/${USER_NAME}/.ssh/authorized_keys"
-                  chroot_exec chown ${USER_NAME}:${USER_NAME} "/home/${USER_NAME}/.ssh/authorized_keys"
+                  chroot_exec chown "${USER_NAME}":"${USER_NAME}" "/home/${USER_NAME}/.ssh/authorized_keys"
                   if [ "$ENABLE_REDUCE" = false ] || [ "$REDUCE_SSHD" = false ] ; then
                     # Allow SSH public key authentication
                   allowed_users="${allowed_users} ${USER_NAME}"
                 fi
-                if [ ! -z "$allowed_users" ] ; then
+                if [ -n "$allowed_users" ] ; then
                   echo "AllowUsers ${allowed_users}" >> "${ETC_DIR}/ssh/sshd_config"
                 fi
               fi

bootstrap.d/41-uboot.sh +11 -1

               fi
               # Build and install U-Boot inside chroot
-              chroot_exec make -j${KERNEL_THREADS} -C /tmp/u-boot/ ${UBOOT_CONFIG} all
+              chroot_exec make -j"${KERNEL_THREADS}" -C /tmp/u-boot/ "${UBOOT_CONFIG}" all
               # Copy compiled bootloader binary and set config.txt to load it
               install_exec "${R}/tmp/u-boot/tools/mkimage" "${R}/usr/sbin/mkimage"
                 fi
               fi
+              if [ "$KERNEL_ARCH" = "arm64" ] ; then
+                echo "Setting up config.txt to boot 64bit uboot"
+                printf "\n# 64bit-mode" >> "${BOOT_DIR}/config.txt"
+                printf "\n# arm_control=0x200 is deprecated https://www.raspberrypi.org/documentation/configuration/config-txt/misc.md" >> "${BOOT_DIR}/config.txt"
+                printf "\narm_64bit=1" >> "${BOOT_DIR}/config.txt"
+            	#in 64bit uboot booti is used instead of bootz [like in KERNEL_BIN_IMAGE=zImage (armv7)|| Image(armv8)]
+                sed -i "s|bootz|booti|g" "${BOOT_DIR}/uboot.mkimage"
+              fi
               # Set mkfile to use the correct dtb file
               sed -i "s/^\(setenv dtbfile \).*/\1${DTB_FILE}/" "${BOOT_DIR}/uboot.mkimage"

bootstrap.d/99-reduce.sh +3 -3

               # Remove all doc files
               if [ "$REDUCE_DOC" = true ] ; then
-                find "${R}/usr/share/doc" -depth -type f ! -name copyright | xargs rm || true
+                find "${R}/usr/share/doc" -depth -type f ! -name copyright -print0 | xargs -0 rm || true
-                find "${R}/usr/share/doc" -empty | xargs rmdir || true
+                find "${R}/usr/share/doc" -empty -print0 | xargs -0 rmdir || true
               fi
               # Remove all man pages and info files
               # Remove all locale translation files
               if [ "$REDUCE_LOCALE" = true ] ; then
-                find "${R}/usr/share/locale" -mindepth 1 -maxdepth 1 ! -name 'en' | xargs rm -r
+                find "${R}/usr/share/locale" -mindepth 1 -maxdepth 1 ! -name 'en' -print0 | xargs -0 rm -r
               fi
               # Remove hwdb PCI device classes (experimental)

files/boot/uboot.mkimage +1 0

             saveenv
             # Load the existing Linux kernel into RAM
+            mmc dev 0
             fatload mmc 0:1 ${kernel_addr_r} kernel7.img
             fatload mmc 0:1 ${fdt_addr_r} ${dtbfile}
             fatload mmc 0:1 ${ramdisk_addr_r} ${initramfs}

rpi23-gen-image.sh +45 -32

             . ./functions.sh
             # Load parameters from configuration template file
-            if [ ! -z "$CONFIG_TEMPLATE" ] ; then
+            if [ -n "$CONFIG_TEMPLATE" ] ; then
               use_template
             fi
             COLLABORA_URL=${COLLABORA_URL:=https://repositories.collabora.co.uk/debian}
             FBTURBO_URL=${FBTURBO_URL:=https://github.com/ssvb/xf86-video-fbturbo.git}
             UBOOT_URL=${UBOOT_URL:=https://git.denx.de/u-boot.git}
+            VIDEOCORE_URL=${VIDEOCORE_URL=https://github.com/raspberrypi/userland}
             # Build directories
             BASEDIR=${BASEDIR:=$(pwd)/images/${RELEASE}}
             LIB_DIR="${R}/lib"
             BOOT_DIR="${R}/boot/firmware"
             KERNEL_DIR="${R}/usr/src/linux"
-            WLAN_FIRMWARE_DIR="${R}/lib/firmware/brcm"
+            WLAN_FIRMWARE_DIR="${LIB_DIR}/firmware/brcm"
             # Firmware directory: Blank if download from github
             RPI_FIRMWARE_DIR=${RPI_FIRMWARE_DIR:=""}
             ENABLE_UBOOT=${ENABLE_UBOOT:=false}
             UBOOTSRC_DIR=${UBOOTSRC_DIR:=""}
             ENABLE_FBTURBO=${ENABLE_FBTURBO:=false}
+            ENABLE_VIDEOCORE=${ENABLE_VIDEOCORE:=true}
+            VIDEOCORESRC_DIR=${VIDEOCORESRC_DIR:=""}
             FBTURBOSRC_DIR=${FBTURBOSRC_DIR:=""}
             ENABLE_HARDNET=${ENABLE_HARDNET:=false}
             ENABLE_IPTABLES=${ENABLE_IPTABLES:=false}
             fi
             # Check if DISABLE_UNDERVOLT_WARNINGS parameter value is supported
-            if [ ! -z "$DISABLE_UNDERVOLT_WARNINGS" ] ; then
+            if [ -n "$DISABLE_UNDERVOLT_WARNINGS" ] ; then
               if [ "$DISABLE_UNDERVOLT_WARNINGS" != 1 ] && [ "$DISABLE_UNDERVOLT_WARNINGS" != 2 ] ; then
                 echo "error: DISABLE_UNDERVOLT_WARNINGS=${DISABLE_UNDERVOLT_WARNINGS} is not supported"
                 exit 1
               fi
             fi
+            if [ "$ENABLE_VIDEOCORE" = true ] ; then
+              REQUIRED_PACKAGES="${REQUIRED_PACKAGES} cmake"
+            fi
             # Add libncurses5 to enable kernel menuconfig
             if [ "$KERNEL_MENUCONFIG" = true ] ; then
-              REQUIRED_PACKAGES="${REQUIRED_PACKAGES} libncurses5-dev"
+              REQUIRED_PACKAGES="${REQUIRED_PACKAGES} libncurses-dev"
             fi
             # Add ccache compiler cache for (faster) kernel cross (re)compilation
             fi
             # Check if root SSH (v2) public key file exists
-            if [ ! -z "$SSH_ROOT_PUB_KEY" ] ; then
+            if [ -n "$SSH_ROOT_PUB_KEY" ] ; then
               if [ ! -f "$SSH_ROOT_PUB_KEY" ] ; then
                 echo "error: '$SSH_ROOT_PUB_KEY' specified SSH public key file not found (SSH_ROOT_PUB_KEY)!"
                 exit 1
             fi
             # Check if $USER_NAME SSH (v2) public key file exists
-            if [ ! -z "$SSH_USER_PUB_KEY" ] ; then
+            if [ -n "$SSH_USER_PUB_KEY" ] ; then
               if [ ! -f "$SSH_USER_PUB_KEY" ] ; then
                 echo "error: '$SSH_USER_PUB_KEY' specified SSH public key file not found (SSH_USER_PUB_KEY)!"
                 exit 1
             # Check if all required packages are installed on the build system
             for package in $REQUIRED_PACKAGES ; do
-              if [ "`dpkg-query -W -f='${Status}' $package`" != "install ok installed" ] ; then
+              if [ "$(dpkg-query -W -f='${Status}' $package)" != "install ok installed" ] ; then
                 MISSING_PACKAGES="${MISSING_PACKAGES} $package"
               fi
             done
               echo "the following packages needed by this script are not installed:"
               echo "$MISSING_PACKAGES"
-              echo -n "\ndo you want to install the missing packages right now? [y/n] "
+              printf "\ndo you want to install the missing packages right now? [y/n] "
-              read confirm
+              read -r confirm
               [ "$confirm" != "y" ] && exit 1
               # Make sure all missing required packages are installed
-              apt-get -qq -y install ${MISSING_PACKAGES}
+              apt-get -qq -y install "${MISSING_PACKAGES}"
             fi
             # Check if ./bootstrap.d directory exists
               exit 1
             fi
+            # Check if specified VIDEOCORESRC_DIR directory exists
+            if [ -n "$VIDEOCORESRC_DIR" ] && [ ! -d "$VIDEOCORESRC_DIR" ] ; then
+              echo "error: '${VIDEOCORESRC_DIR}' specified directory not found (VIDEOCORESRC_DIR)!"
+              exit 1
+            fi
             # Check if specified FBTURBOSRC_DIR directory exists
             if [ -n "$FBTURBOSRC_DIR" ] && [ ! -d "$FBTURBOSRC_DIR" ] ; then
               echo "error: '${FBTURBOSRC_DIR}' specified directory not found (FBTURBOSRC_DIR)!"
             mkdir -p "${R}"
             # Check if build directory has enough of free disk space >512MB
-            if [ "$(df --output=avail ${BUILDDIR} | sed "1d")" -le "524288" ] ; then
+            if [ "$(df --output=avail "${BUILDDIR}" | sed "1d")" -le "524288" ] ; then
               echo "error: ${BUILDDIR} not enough space left to generate the output image!"
               exit 1
             fi
               # Add dropbear package instead of openssh-server
               if [ "$REDUCE_SSHD" = true ] ; then
-                APT_INCLUDES="$(echo ${APT_INCLUDES} | sed "s/openssh-server/dropbear/")"
+                APT_INCLUDES="$(echo "${APT_INCLUDES}" | sed "s/openssh-server/dropbear/")"
               fi
             fi
             fi
             # Calculate size of the chroot directory in KB
-            CHROOT_SIZE=$(expr `du -s "${R}" | awk '{ print $1 }'`)
+            CHROOT_SIZE=$(expr "$(du -s "${R}" | awk '{ print $1 }')")
             # Calculate the amount of needed 512 Byte sectors
             TABLE_SECTORS=$(expr 1 \* 1024 \* 1024 \/ 512)
             FRMW_SECTORS=$(expr 64 \* 1024 \* 1024 \/ 512)
-            ROOT_OFFSET=$(expr ${TABLE_SECTORS} + ${FRMW_SECTORS})
+            ROOT_OFFSET=$(expr "${TABLE_SECTORS}" + "${FRMW_SECTORS}")
             # The root partition is EXT4
             # This means more space than the actual used space of the chroot is used.
             # As overhead for journaling and reserved blocks 35% are added.
-            ROOT_SECTORS=$(expr $(expr ${CHROOT_SIZE} + ${CHROOT_SIZE} \/ 100 \* 35) \* 1024 \/ 512)
+            ROOT_SECTORS=$(expr "$(expr "${CHROOT_SIZE}" + "${CHROOT_SIZE}" \/ 100 \* 35)" \* 1024 \/ 512)
             # Calculate required image size in 512 Byte sectors
-            IMAGE_SECTORS=$(expr ${TABLE_SECTORS} + ${FRMW_SECTORS} + ${ROOT_SECTORS})
+            IMAGE_SECTORS=$(expr "${TABLE_SECTORS}" + "${FRMW_SECTORS}" + "${ROOT_SECTORS}")
             # Prepare image file
             if [ "$ENABLE_SPLITFS" = true ] ; then
-              dd if=/dev/zero of="$IMAGE_NAME-frmw.img" bs=512 count=${TABLE_SECTORS}
+              dd if=/dev/zero of="$IMAGE_NAME-frmw.img" bs=512 count="${TABLE_SECTORS}"
-              dd if=/dev/zero of="$IMAGE_NAME-frmw.img" bs=512 count=0 seek=${FRMW_SECTORS}
+              dd if=/dev/zero of="$IMAGE_NAME-frmw.img" bs=512 count=0 seek="${FRMW_SECTORS}"
-              dd if=/dev/zero of="$IMAGE_NAME-root.img" bs=512 count=${TABLE_SECTORS}
+              dd if=/dev/zero of="$IMAGE_NAME-root.img" bs=512 count="${TABLE_SECTORS}"
-              dd if=/dev/zero of="$IMAGE_NAME-root.img" bs=512 count=0 seek=${ROOT_SECTORS}
+              dd if=/dev/zero of="$IMAGE_NAME-root.img" bs=512 count=0 seek="${ROOT_SECTORS}"
               # Write firmware/boot partition tables
               sfdisk -q -L -uS -f "$IMAGE_NAME-frmw.img" 2> /dev/null <<EOM
             EOM
               # Setup temporary loop devices
-              FRMW_LOOP="$(losetup -o 1M --sizelimit 64M -f --show $IMAGE_NAME-frmw.img)"
+              FRMW_LOOP="$(losetup -o 1M --sizelimit 64M -f --show "$IMAGE_NAME"-frmw.img)"
-              ROOT_LOOP="$(losetup -o 1M -f --show $IMAGE_NAME-root.img)"
+              ROOT_LOOP="$(losetup -o 1M -f --show "$IMAGE_NAME"-root.img)"
             else # ENABLE_SPLITFS=false
-              dd if=/dev/zero of="$IMAGE_NAME.img" bs=512 count=${TABLE_SECTORS}
+              dd if=/dev/zero of="$IMAGE_NAME.img" bs=512 count="${TABLE_SECTORS}"
-              dd if=/dev/zero of="$IMAGE_NAME.img" bs=512 count=0 seek=${IMAGE_SECTORS}
+              dd if=/dev/zero of="$IMAGE_NAME.img" bs=512 count=0 seek="${IMAGE_SECTORS}"
               # Write partition table
               sfdisk -q -L -uS -f "$IMAGE_NAME.img" 2> /dev/null <<EOM
             EOM
               # Setup temporary loop devices
-              FRMW_LOOP="$(losetup -o 1M --sizelimit 64M -f --show $IMAGE_NAME.img)"
+              FRMW_LOOP="$(losetup -o 1M --sizelimit 64M -f --show "$IMAGE_NAME".img)"
-              ROOT_LOOP="$(losetup -o 65M -f --show $IMAGE_NAME.img)"
+              ROOT_LOOP="$(losetup -o 65M -f --show "$IMAGE_NAME".img)"
             fi
             if [ "$ENABLE_CRYPTFS" = true ] ; then
               ROOT_LOOP="/dev/mapper/${CRYPTFS_MAPPING}"
               # Wipe encrypted partition (encryption cipher is used for randomness)
-              dd if=/dev/zero of="${ROOT_LOOP}" bs=512 count=$(blockdev --getsz "${ROOT_LOOP}")
+              dd if=/dev/zero of="${ROOT_LOOP}" bs=512 count="$(blockdev --getsz "${ROOT_LOOP}")"
             fi
             # Build filesystems
               bmaptool create -o "$IMAGE_NAME-root.bmap" "$IMAGE_NAME-root.img"
               # Image was successfully created
-              echo "$IMAGE_NAME-frmw.img ($(expr \( ${TABLE_SECTORS} + ${FRMW_SECTORS} \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
+              echo "$IMAGE_NAME-frmw.img ($(expr \( "${TABLE_SECTORS}" + "${FRMW_SECTORS}" \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
-              echo "$IMAGE_NAME-root.img ($(expr \( ${TABLE_SECTORS} + ${ROOT_SECTORS} \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
+              echo "$IMAGE_NAME-root.img ($(expr \( "${TABLE_SECTORS}" + "${ROOT_SECTORS}" \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
             else
               # Create block map file for "bmaptool"
               bmaptool create -o "$IMAGE_NAME.bmap" "$IMAGE_NAME.img"
               # Image was successfully created
-              echo "$IMAGE_NAME.img ($(expr \( ${TABLE_SECTORS} + ${FRMW_SECTORS} + ${ROOT_SECTORS} \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
+              echo "$IMAGE_NAME.img ($(expr \( "${TABLE_SECTORS}" + "${FRMW_SECTORS}" + "${ROOT_SECTORS}" \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
               # Create qemu qcow2 image
               if [ "$ENABLE_QEMU" = true ] ; then
                 QEMU_IMAGE=${QEMU_IMAGE:=${BASEDIR}/qemu/${DATE}-${KERNEL_ARCH}-CURRENT-rpi${RPI_MODEL}-${RELEASE}-${RELEASE_ARCH}}
                 QEMU_SIZE=16G
-                qemu-img convert -f raw -O qcow2 $IMAGE_NAME.img $QEMU_IMAGE.qcow2
+                qemu-img convert -f raw -O qcow2 "$IMAGE_NAME".img "$QEMU_IMAGE".qcow2
-                qemu-img resize $QEMU_IMAGE.qcow2 $QEMU_SIZE
+                qemu-img resize "$QEMU_IMAGE".qcow2 $QEMU_SIZE
                 echo "$QEMU_IMAGE.qcow2 ($QEMU_SIZE)" ": successfully created"
               fi

General Comments 0

Écrire
Preview

Vous devez vous connecter pour laisser un commentaire. Se connecter maintenant

No TODOs yet

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Dépôts
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages