| @@ -165,7 +165,7 Enable onboard Bluetooth interface on the RPi0/3/3P. See: https://spellfoundry.c | |||
|
|
165 | 165 | Enable Bluetooth to use this. Adds overlay to swap UART0 with UART1. Enabling (slower) Bluetooth and full speed serial console. - RPI `0` `3` `3P` have a fast `hardware UART0` (ttyAMA0) and a `mini UART1` (ttyS0)! RPI `1` `1P` `2` only have a `hardware UART0`. `UART0` is considered better, because is faster and more stable than `mini UART1`. By default the Bluetooth modem is mapped to the `hardware UART0` and `mini UART` is used for console. The `mini UART` is a problem for the serial console, because its baudrate depends on the cpu frequency, which is changing on runtime. Resulting in a volatile baudrate and thus in an unusable serial console. |
|
|
166 | 166 | |
|
|
167 | 167 | ##### `ENABLE_TURBO`=false |
|
|
168 | Enable Turbo mode. This setting locks cpu at highest frequency. As setting ENABLE_CONSOLE=true locks RPI to lowest CPU speed, this is can be used additionally to lock cpu hat max speed. Need a good power supply and probably cooling for the Raspberry PI. | |
|
|
168 | VOIDS WARRANTY! Enable Turbo mode - NO overclocking. This setting locks cpu at highest frequency. As setting ENABLE_CONSOLE=true locks RPI to lowest CPU speed, this is can be used additionally to lock cpu hat max speed. Need a good power supply and probably cooling for the Raspberry PI. | |
|
|
169 | 169 | |
|
|
170 | 170 | ##### `ENABLE_I2C`=false |
|
|
171 | 171 | Enable I2C interface on the RPi2/3. Please check the [RPi2/3 pinout diagrams](https://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins. |
| @@ -113,6 +113,7 if [ "$BUILD_KERNEL" = true ] ; then | |||
|
|
113 | 113 | set_kernel_config CONFIG_IP_NF_TARGET_SYNPROXY m |
|
|
114 | 114 | set_kernel_config CONFIG_NETFILTER_XT_MATCH_CGROUP m |
|
|
115 | 115 | set_kernel_config CONFIG_NETFILTER_XT_MATCH_IPCOMP m |
|
|
116 | set_kernel_config CONFIG_NETFILTER_XT_MATCH_SOCKET m | |
|
|
116 | 117 | set_kernel_config CONFIG_NFT_FIB_INET m |
|
|
117 | 118 | set_kernel_config CONFIG_NFT_FIB_IPV4 m |
|
|
118 | 119 | set_kernel_config CONFIG_NFT_FIB_IPV6 m |
| @@ -120,7 +121,7 if [ "$BUILD_KERNEL" = true ] ; then | |||
|
|
120 | 121 | set_kernel_config CONFIG_NFT_OBJREF m |
|
|
121 | 122 | set_kernel_config CONFIG_NFT_RT m |
|
|
122 | 123 | set_kernel_config CONFIG_NFT_SET_BITMAP m |
|
|
123 |
set_kernel_config CONFIG_NF_CONNTRACK_TIMEOUT |
|
|
|
124 | set_kernel_config CONFIG_NF_CONNTRACK_TIMEOUT y | |
|
|
124 | 125 | set_kernel_config CONFIG_NF_LOG_ARP m |
|
|
125 | 126 | set_kernel_config CONFIG_NF_SOCKET_IPV4 m |
|
|
126 | 127 | set_kernel_config CONFIG_NF_SOCKET_IPV6 m |
| @@ -67,6 +67,9 fi | |||
|
|
67 | 67 | #locks cpu at max frequency |
|
|
68 | 68 | if [ "$ENABLE_TURBO" = true ] ; then |
|
|
69 | 69 | echo "force_turbo=1" >> "${BOOT_DIR}/config.txt" |
|
|
70 | # helps to avoid sdcard corruption when force_turbo is enabled. | |
|
|
71 | echo "boot_delay=1" >> "${BOOT_DIR}/config.txt" | |
|
|
72 | ||
|
|
70 | 73 | fi |
|
|
71 | 74 | |
|
|
72 | 75 | if [ "$ENABLE_PRINTK" = true ] ; then |
| @@ -21,7 +21,7 if [ "$ENABLE_NEXMON" = true ] && [ "$ENABLE_WIRELESS" = true ]; then | |||
|
|
21 | 21 | chown -R root:root "${R}"/tmp/nexmon |
|
|
22 | 22 | |
|
|
23 | 23 | # Set script Root |
|
|
24 | NEXMON_ROOT="${R}"/tmp/nexmon | |
|
|
24 | export NEXMON_ROOT="${R}"/tmp/nexmon | |
|
|
25 | 25 | |
|
|
26 | 26 | # Remove temporary directory for nexmon sources |
|
|
27 | 27 | rm -fr "${temp_dir}" |
| @@ -35,14 +35,16 if [ "$ENABLE_NEXMON" = true ] && [ "$ENABLE_WIRELESS" = true ]; then | |||
|
|
35 | 35 | # Setup Enviroment: see https://github.com/NoobieDog/nexmon/blob/master/setup_env.sh |
|
|
36 | 36 | #ARCH="${KERNEL_ARCH}" |
|
|
37 | 37 | #SUBARCH="${KERNEL_ARCH}" |
|
|
38 | KERNEL="${KERNEL_IMAGE}" | |
|
|
39 | ARCH=arm | |
|
|
40 | SUBARCH=arm | |
|
|
41 | CC="${NEXMON_ROOT}"/buildtools/gcc-arm-none-eabi-5_4-2016q2-linux-x86/bin/arm-none-eabi- | |
|
|
42 | CCPLUGIN="${NEXMON_ROOT}"/buildtools/gcc-nexmon-plugin/nexmon.so | |
|
|
43 | ZLIBFLATE="zlib-flate -compress" | |
|
|
44 | Q=@ | |
|
|
45 | NEXMON_SETUP_ENV=1 | |
|
|
38 | export KERNEL="${KERNEL_IMAGE}" | |
|
|
39 | export ARCH=arm | |
|
|
40 | export SUBARCH=arm | |
|
|
41 | export CC="${NEXMON_ROOT}"/buildtools/gcc-arm-none-eabi-5_4-2016q2-linux-x86/bin/arm-none-eabi- | |
|
|
42 | export CCPLUGIN="${NEXMON_ROOT}"/buildtools/gcc-nexmon-plugin/nexmon.so | |
|
|
43 | export ZLIBFLATE="zlib-flate -compress" | |
|
|
44 | export Q=@ | |
|
|
45 | export NEXMON_SETUP_ENV=1 | |
|
|
46 | export HOSTUNAME=$(uname -s) | |
|
|
47 | export PLATFORMUNAME=$(uname -m) | |
|
|
46 | 48 | #. ./setup_env.sh |
|
|
47 | 49 | |
|
|
48 | 50 | # Make nexmon |
| @@ -81,7 +83,25 if [ "$ENABLE_NEXMON" = true ] && [ "$ENABLE_WIRELESS" = true ]; then | |||
|
|
81 | 83 | cp -f "${NEXMON_ROOT}"/patches/bcm43455c0/7_45_154/nexmon/brcmfmac43455-sdio.bin "${WLAN_FIRMWARE_DIR}"/brcmfmac43455-sdio.bin |
|
|
82 | 84 | fi |
|
|
83 | 85 | |
|
|
86 | # Install kernel module | |
|
|
87 | "${LIB_DIR}"/modules/${KERNEL_VERSION}/ | |
|
|
88 | ||
|
|
84 | 89 | #Revert to previous directory |
|
|
85 | 90 | cd "${WORKDIR}" || exit |
|
|
86 | 91 | |
|
|
87 | 92 | fi |
|
|
93 | ||
|
|
94 | ## To make the RPi load the modified driver after reboot | |
|
|
95 | # Find the path of the default driver at reboot | |
|
|
96 | # e.g. '/lib/modules/4.14.71-v7+/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko' | |
|
|
97 | PATH_OF_DEFAULT_DRIVER_AT_REBOOT=$(modinfo brcmfmac | grep -m 1 -oP "^filename:(\s*?)(.*)$" | sed -e 's/^filename:\(\s*\)\(.*\)$/\2/g') | |
|
|
98 | # Backup the original driver | |
|
|
99 | mv $PATH_OF_DEFAULT_DRIVER_AT_REBOOT "$PATH_OF_DEFAULT_DRIVER_AT_REBOOT.orig" | |
|
|
100 | # Copy the modified driver (Kernel 4.14) | |
|
|
101 | if is_pizero ; then | |
|
|
102 | cp ./patches/bcm43430a1/7_45_41_46/nexmon/brcmfmac_4.14.y-nexmon/brcmfmac.ko $PATH_OF_DEFAULT_DRIVER_AT_REBOOT | |
|
|
103 | else | |
|
|
104 | cp ./patches/bcm43455c0/7_45_154/nexmon/brcmfmac_4.14.y-nexmon/brcmfmac.ko $PATH_OF_DEFAULT_DRIVER_AT_REBOOT | |
|
|
105 | fi | |
|
|
106 | # Probe all modules and generate new dependency | |
|
|
107 | depmod -a No newline at end of file | |
| @@ -80,7 +80,7 chroot_remove_cc() { | |||
|
|
80 | 80 | #https://github.com/sakaki-/bcmrpi3-kernel-bis/blob/master/conform_config.sh |
|
|
81 | 81 | set_kernel_config() { |
|
|
82 | 82 | # flag as $1, value to set as $2, config must exist at "./.config" |
|
|
83 | TGT="${1}" | |
|
|
83 | TGT="CONFIG_${1#CONFIG_}" | |
|
|
84 | 84 | REP="${2}" |
|
|
85 | 85 | if grep -q "^${TGT}[^_]" .config; then |
|
|
86 | 86 | sed -i "s/^\(${TGT}=.*\|# ${TGT} is not set\)/${TGT}=${REP}/" .config |
General Comments 0
Vous devez vous connecter pour laisser un commentaire.
Se connecter maintenant
