| @@ -0,0 +1,1 | |||
|
|
1 | Acquire::http:Proxy ""; | |
| @@ -0,0 +1,3 | |||
|
|
1 | Package: flash-kernel | |
|
|
2 | Pin: origin repositories.collabora.co.uk | |
|
|
3 | Pin-Priority: 1000 | |
| @@ -0,0 +1,10 | |||
|
|
1 | deb http://ftp.debian.org/debian jessie main contrib | |
|
|
2 | #deb-src http://ftp.debian.org/debian jessie main contrib | |
|
|
3 | ||
|
|
4 | deb http://ftp.debian.org/debian/ jessie-updates main contrib | |
|
|
5 | #deb-src http://ftp.debian.org/debian/ jessie-updates main contrib | |
|
|
6 | ||
|
|
7 | deb http://security.debian.org/ jessie/updates main contrib | |
|
|
8 | #deb-src http://security.debian.org/ jessie/updates main contrib | |
|
|
9 | ||
|
|
10 | deb https://repositories.collabora.co.uk/debian jessie rpi2 | |
| @@ -0,0 +1,11 | |||
|
|
1 | # Tell Linux that it is booting on a Raspberry Pi2 | |
|
|
2 | setenv machid 0x00000c42 | |
|
|
3 | ||
|
|
4 | # Save these changes to u-boot's environment | |
|
|
5 | saveenv | |
|
|
6 | ||
|
|
7 | # Load the existing Linux kernel into RAM | |
|
|
8 | fatload mmc 0:1 ${kernel_addr_r} kernel7.img | |
|
|
9 | ||
|
|
10 | # Boot the kernel we have just loaded | |
|
|
11 | bootz ${kernel_addr_r} | |
| @@ -0,0 +1,1 | |||
|
|
1 | rpi2-jessie | |
| @@ -0,0 +1,2 | |||
|
|
1 | # Debian switched to systemd-networkd configuration files. | |
|
|
2 | # please configure your networks in '/etc/systemd/network/' | |
| @@ -0,0 +1,6 | |||
|
|
1 | Section "Device" | |
|
|
2 | Identifier "Allwinner A10/A13 FBDEV" | |
|
|
3 | Driver "fbturbo" | |
|
|
4 | Option "fbdev" "/dev/fb0" | |
|
|
5 | Option "SwapbuffersWait" "true" | |
|
|
6 | EndSection | |
| @@ -18,7 +18,8 ENABLE_WM=xfce4 ENABLE_FBTURBO=true ENABLE_MINBASE=true ./rpi2-gen-image.sh | |||
|
|
18 | 18 | ENABLE_HARDNET=true ENABLE_IPTABLES=true /rpi2-gen-image.sh |
|
|
19 | 19 | APT_SERVER=ftp.de.debian.org APT_PROXY="http://127.0.0.1:3142/" ./rpi2-gen-image.sh |
|
|
20 | 20 | ENABLE_MINBASE=true ./rpi2-gen-image.sh |
|
|
21 | ``` | |
|
|
21 | BUILD_KERNEL=true ENABLE_MINBASE=true ENABLE_IPV6=false ./rpi2-gen-image.sh | |
|
|
22 | ``` | |
|
|
22 | 23 | |
|
|
23 | 24 | #### APT settings: |
|
|
24 | 25 | ##### `APT_SERVER`="ftp.debian.org" |
| @@ -49,25 +50,25 Expand the root partition and filesystem automatically on first boot. | |||
|
|
49 | 50 | #### Keyboard settings: |
|
|
50 | 51 | These options are used to configure keyboard layout in `/etc/default/keyboard` for console and Xorg. These settings can also be changed inside the running OS using the `dpkg-reconfigure keyboard-configuration` command. |
|
|
51 | 52 | |
|
|
52 | ##### `XKBMODEL`="" | |
|
|
53 | ##### `XKB_MODEL`="" | |
|
|
53 | 54 | Set the name of the model of your keyboard type. |
|
|
54 | 55 | |
|
|
55 | ##### `XKBLAYOUT`="" | |
|
|
56 | ##### `XKB_LAYOUT`="" | |
|
|
56 | 57 | Set the supported keyboard layout(s). |
|
|
57 | 58 | |
|
|
58 | ##### `XKBVARIANT`="" | |
|
|
59 | ##### `XKB_VARIANT`="" | |
|
|
59 | 60 | Set the supported variant(s) of the keyboard layout(s). |
|
|
60 | 61 | |
|
|
61 | ##### `XKBOPTIONS`="" | |
|
|
62 | ##### `XKB_OPTIONS`="" | |
|
|
62 | 63 | Set extra xkb configuration options. |
|
|
63 | 64 | |
|
|
64 | #### Networking settings (DHCP) | |
|
|
65 | #### Networking settings (DHCP): | |
|
|
65 | 66 | This setting is used to set up networking auto configuration in `/etc/systemd/network/eth.network`. |
|
|
66 | 67 | |
|
|
67 | 68 | #####`ENABLE_DHCP`=true |
|
|
68 | 69 | Set the system to use DHCP. This requires an DHCP server. |
|
|
69 | 70 | |
|
|
70 | #### Networking settings (static) | |
|
|
71 | #### Networking settings (static): | |
|
|
71 | 72 | These settings are used to set up a static networking configuration in /etc/systemd/network/eth.network. The following static networking settings are only supported if `ENABLE_DHCP` was set to `false`. |
|
|
72 | 73 | |
|
|
73 | 74 | #####`NET_ADDRESS`="" |
| @@ -156,8 +157,14 Path to a directory with scripts that should be run in the chroot before the ima | |||
|
|
156 | 157 | ##### `BUILD_KERNEL`=false |
|
|
157 | 158 | Build and install the latest RPi2 linux kernel. Currently only the default RPi2 kernel configuration is used. Detailed configuration parameters for customizing the kernel and minor bug fixes still need to get implemented. feel free to help. |
|
|
158 | 159 | |
|
|
160 | ##### `KERNEL_THREADS`=1 | |
|
|
161 | Number of parallel kernel building threads. If the parameter is left untouched the script will automatically determine the number of CPU cores to set the number of parallel threads to speed the kernel compilation. | |
|
|
162 | ||
|
|
159 | 163 | ##### `KERNEL_HEADERS`=true |
|
|
160 |
I |
|
|
|
164 | Install kernel headers with built kernel. | |
|
|
165 | ||
|
|
166 | ##### `KERNEL_RMSRC`=true | |
|
|
167 | Remove all kernel sources from the generated OS image after building. | |
|
|
161 | 168 | |
|
|
162 | 169 | ## Understanding the script |
|
|
163 | 170 | The functions of this script that are required for the different stages of the bootstrapping are split up into single files located inside the `bootstrap.d` directory. During the bootstrapping every script in this directory gets executed in lexicographical order: |
| @@ -169,11 +176,11 The functions of this script that are required for the different stages of the b | |||
|
|
169 | 176 | | `12-locale.sh` | Setup Locales and keyboard settings | |
|
|
170 | 177 | | `13-kernel.sh` | Build and install RPi2 Kernel | |
|
|
171 | 178 | | `20-networking.sh` | Setup Networking | |
|
|
172 |
| `21-firewall.sh` | Setup |
|
|
|
173 |
| `30-security.sh` | Setup |
|
|
|
174 |
| `31-logging.sh` | Setup |
|
|
|
179 | | `21-firewall.sh` | Setup Firewall | | |
|
|
180 | | `30-security.sh` | Setup Users and Security settings | | |
|
|
181 | | `31-logging.sh` | Setup Logging | | |
|
|
175 | 182 | | `41-uboot.sh` | Build and Setup Uboot | |
|
|
176 | | `42-fbturbo.sh` | Buld and Setup fbturbo Xorg driver | | |
|
|
183 | | `42-fbturbo.sh` | Build and Setup fbturbo Xorg driver | | |
|
|
177 | 184 | | `50-firstboot.sh` | First boot actions | |
|
|
178 | 185 | |
|
|
179 | 186 | All the required configuration files that will be copied to the generated OS image are located inside the `files` directory. It is not recommended to modify these configuration files manually. |
| @@ -183,6 +190,7 All the required configuration files that will be copied to the generated OS ima | |||
|
|
183 | 190 | | `boot` | Boot and RPi2 configuration files | |
|
|
184 | 191 | | `firstboot` | Scripts that get executed on first boot | |
|
|
185 | 192 | | `iptables` | Firewall configuration files | |
|
|
193 | | `locales` | Locales configuration | | |
|
|
186 | 194 | | `modprobe.d` | Kernel Module Blacklist configuration | |
|
|
187 | 195 | | `mount` | Fstab configuration | |
|
|
188 | 196 | | `network` | Networking configuration files | |
| @@ -2,6 +2,7 | |||
|
|
2 | 2 | # Debootstrap basic system |
|
|
3 | 3 | # |
|
|
4 | 4 | |
|
|
5 | # Load utility functions | |
|
|
5 | 6 | . ./functions.sh |
|
|
6 | 7 | |
|
|
7 | 8 | # Base debootstrap (unpack only) |
| @@ -2,19 +2,17 | |||
|
|
2 | 2 | # Setup APT repositories |
|
|
3 | 3 | # |
|
|
4 | 4 | |
|
|
5 | # Load utility functions | |
|
|
5 | 6 | . ./functions.sh |
|
|
6 | 7 | |
|
|
7 | 8 | # Use proxy inside chroot |
|
|
8 | 9 | if [ -z "$APT_PROXY" ] ; then |
|
|
9 | echo "Acquire::http::Proxy \"$APT_PROXY\";" >> $R/etc/apt/apt.conf.d/10proxy | |
|
|
10 | install_readonly files/apt/10proxy $R/etc/apt/apt.conf.d/10proxy | |
|
|
11 | sed -i -e "s/\"\"/\"${APT_PROXY}\"/" $R/etc/apt/apt.conf.d/10proxy | |
|
|
10 | 12 | fi |
|
|
11 | 13 | |
|
|
12 | 14 | # Pin package flash-kernel to repositories.collabora.co.uk |
|
|
13 |
|
|
|
|
14 | Package: flash-kernel | |
|
|
15 | Pin: origin repositories.collabora.co.uk | |
|
|
16 | Pin-Priority: 1000 | |
|
|
17 | EOM | |
|
|
15 | install_readonly files/apt/flash-kernel $R/etc/apt/preferences.d/flash-kernel | |
|
|
18 | 16 | |
|
|
19 | 17 | # Upgrade collabora package index and install collabora keyring |
|
|
20 | 18 | echo "deb https://repositories.collabora.co.uk/debian ${RELEASE} rpi2" >$R/etc/apt/sources.list |
| @@ -22,18 +20,9 chroot_exec apt-get -qq -y update | |||
|
|
22 | 20 | chroot_exec apt-get -qq -y --force-yes install collabora-obs-archive-keyring |
|
|
23 | 21 | |
|
|
24 | 22 | # Set up initial sources.list |
|
|
25 | cat <<EOM >$R/etc/apt/sources.list | |
|
|
26 | deb http://${APT_SERVER}/debian ${RELEASE} main contrib | |
|
|
27 | #deb-src http://${APT_SERVER}/debian ${RELEASE} main contrib | |
|
|
28 | ||
|
|
29 | deb http://${APT_SERVER}/debian/ ${RELEASE}-updates main contrib | |
|
|
30 | #deb-src http://${APT_SERVER}/debian/ ${RELEASE}-updates main contrib | |
|
|
31 | ||
|
|
32 | deb http://security.debian.org/ ${RELEASE}/updates main contrib | |
|
|
33 | #deb-src http://security.debian.org/ ${RELEASE}/updates main contrib | |
|
|
34 | ||
|
|
35 | deb https://repositories.collabora.co.uk/debian ${RELEASE} rpi2 | |
|
|
36 | EOM | |
|
|
23 | install_readonly files/apt/sources.list $R/etc/apt/sources.list | |
|
|
24 | sed -i -e "s/\/ftp.debian.org\//\/${APT_SERVER}\//" $R/etc/apt/sources.list | |
|
|
25 | sed -i -e "s/ jessie/ ${RELEASE}/" $R/etc/apt/sources.list | |
|
|
37 | 26 | |
|
|
38 | 27 | # Upgrade package index and update all installed packages and changed dependencies |
|
|
39 | 28 | chroot_exec apt-get -qq -y update |
| @@ -1,7 +1,8 | |||
|
|
1 | 1 | # |
|
|
2 |
# Setup |
|
|
|
2 | # Setup Locales and keyboard settings | |
|
|
3 | 3 | # |
|
|
4 | 4 | |
|
|
5 | # Load utility functions | |
|
|
5 | 6 | . ./functions.sh |
|
|
6 | 7 | |
|
|
7 | 8 | # Set up timezone |
| @@ -20,25 +21,27 if [ "$ENABLE_MINBASE" = false ] ; then | |||
|
|
20 | 21 | chroot_exec echo "locales locales/locales_to_be_generated multiselect en_US.UTF-8 UTF-8, ${DEFLOCAL} UTF-8" | debconf-set-selections |
|
|
21 | 22 | chroot_exec sed -i "/en_US.UTF-8/s/^#//" /etc/locale.gen |
|
|
22 | 23 | fi |
|
|
24 | ||
|
|
23 | 25 | chroot_exec sed -i "/${DEFLOCAL}/s/^#//" /etc/locale.gen |
|
|
24 | 26 | chroot_exec echo "locales locales/default_environment_locale select ${DEFLOCAL}" | debconf-set-selections |
|
|
25 | 27 | chroot_exec locale-gen |
|
|
26 | 28 | chroot_exec update-locale LANG=${DEFLOCAL} |
|
|
27 | 29 | |
|
|
28 | 30 | # Keyboard configuration, if requested |
|
|
29 | if [ "$XKBMODEL" != "" ] ; then | |
|
|
30 | chroot_exec sed -i "s/^XKBMODEL.*/XKBMODEL=\"${XKBMODEL}\"/" /etc/default/keyboard | |
|
|
31 | if [ "$XKB_MODEL" != "" ] ; then | |
|
|
32 | chroot_exec sed -i "s/^XKBMODEL.*/XKBMODEL=\"${XKB_MODEL}\"/" /etc/default/keyboard | |
|
|
31 | 33 | fi |
|
|
32 | if [ "$XKBLAYOUT" != "" ] ; then | |
|
|
33 | chroot_exec sed -i "s/^XKBLAYOUT.*/XKBLAYOUT=\"${XKBLAYOUT}\"/" /etc/default/keyboard | |
|
|
34 | if [ "$XKB_LAYOUT" != "" ] ; then | |
|
|
35 | chroot_exec sed -i "s/^XKBLAYOUT.*/XKBLAYOUT=\"${XKB_LAYOUT}\"/" /etc/default/keyboard | |
|
|
34 | 36 | fi |
|
|
35 | if [ "$XKBVARIANT" != "" ] ; then | |
|
|
36 | chroot_exec sed -i "s/^XKBVARIANT.*/XKBVARIANT=\"${XKBVARIANT}\"/" /etc/default/keyboard | |
|
|
37 | if [ "$XKB_VARIANT" != "" ] ; then | |
|
|
38 | chroot_exec sed -i "s/^XKBVARIANT.*/XKBVARIANT=\"${XKB_VARIANT}\"/" /etc/default/keyboard | |
|
|
37 | 39 | fi |
|
|
38 | if [ "$XKBOPTIONS" != "" ] ; then | |
|
|
39 | chroot_exec sed -i "s/^XKBOPTIONS.*/XKBOPTIONS=\"${XKBOPTIONS}\"/" /etc/default/keyboard | |
|
|
40 | if [ "$XKB_OPTIONS" != "" ] ; then | |
|
|
41 | chroot_exec sed -i "s/^XKBOPTIONS.*/XKBOPTIONS=\"${XKB_OPTIONS}\"/" /etc/default/keyboard | |
|
|
40 | 42 | fi |
|
|
41 | 43 | chroot_exec dpkg-reconfigure -f noninteractive keyboard-configuration |
|
|
44 | ||
|
|
42 | 45 | # Set up font console |
|
|
43 | 46 | case "${DEFLOCAL}" in |
|
|
44 | 47 | *UTF-8) |
| @@ -49,4 +52,7 if [ "$ENABLE_MINBASE" = false ] ; then | |||
|
|
49 | 52 | ;; |
|
|
50 | 53 | esac |
|
|
51 | 54 | chroot_exec dpkg-reconfigure -f noninteractive console-setup |
|
|
55 | else | |
|
|
56 | # Set POSIX default locales | |
|
|
57 | install_readonly files/locales/locale $R/etc/default/locale | |
|
|
52 | 58 | fi |
| @@ -1,43 +1,56 | |||
|
|
1 | 1 | # |
|
|
2 | # Kernel installation | |
|
|
2 | # Build and Setup RPi2 Kernel | |
|
|
3 | 3 | # |
|
|
4 | 4 | |
|
|
5 | # Load utility functions | |
|
|
5 | 6 | . ./functions.sh |
|
|
6 | 7 | |
|
|
7 | 8 | # Fetch and build latest raspberry kernel |
|
|
8 | 9 | if [ "$BUILD_KERNEL" = true ] ; then |
|
|
9 | 10 | # Fetch current raspberrypi kernel sources |
|
|
10 |
git -C $R/usr/ |
|
|
|
11 | git -C $R/usr/src clone --depth=1 https://github.com/raspberrypi/linux | |
|
|
11 | 12 | |
|
|
12 | 13 | # Load default raspberry kernel configuration |
|
|
13 |
make -C $R/usr/ |
|
|
|
14 | make -C $R/usr/src/linux ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- bcm2709_defconfig | |
|
|
15 | ||
|
|
16 | # Calculate optimal number of kernel building threads | |
|
|
17 | if [ "KERNEL_THREADS" = 1 ] ; then | |
|
|
18 | if [ -f /proc/cpuinfo ] ; then | |
|
|
19 | KERNEL_THREADS=$(grep -c processor /proc/cpuinfo) | |
|
|
20 | fi | |
|
|
21 | fi | |
|
|
14 | 22 | |
|
|
15 | 23 | # Cross compile kernel and modules |
|
|
16 |
make -C $R/usr/ |
|
|
|
24 | make -C $R/usr/src/linux -j${KERNEL_THREADS} ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- zImage modules dtbs | |
|
|
17 | 25 | |
|
|
18 | 26 | # Install kernel modules |
|
|
19 |
make -C $R/usr/ |
|
|
|
27 | make -C $R/usr/src/linux ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- INSTALL_MOD_PATH=../../.. modules_install | |
|
|
20 | 28 | |
|
|
21 | 29 | # Install kernel headers |
|
|
22 | 30 | if [ "$KERNEL_HEADERS" = true ]; then |
|
|
23 |
make -C $R/usr/ |
|
|
|
31 | make -C $R/usr/src/linux ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- INSTALL_HDR_PATH=../.. headers_install | |
|
|
24 | 32 | fi |
|
|
25 | 33 | |
|
|
26 | 34 | # Copy and rename compiled kernel to boot directory |
|
|
27 | 35 | mkdir $R/boot/firmware/ |
|
|
28 |
$R/usr/ |
|
|
|
36 | $R/usr/src/linux/scripts/mkknlimg $R/usr/src/linux/arch/arm/boot/zImage $R/boot/firmware/kernel7.img | |
|
|
29 | 37 | |
|
|
30 | 38 | # Copy dts and dtb device definitions |
|
|
31 | 39 | mkdir $R/boot/firmware/overlays/ |
|
|
32 |
cp $R/usr/ |
|
|
|
33 |
cp $R/usr/ |
|
|
|
34 |
cp $R/usr/ |
|
|
|
40 | cp $R/usr/src/linux/arch/arm/boot/dts/*.dtb $R/boot/firmware/ | |
|
|
41 | cp $R/usr/src/linux/arch/arm/boot/dts/overlays/*.dtb* $R/boot/firmware/overlays/ | |
|
|
42 | cp $R/usr/src/linux/arch/arm/boot/dts/overlays/README $R/boot/firmware/overlays/ | |
|
|
43 | ||
|
|
44 | # Remove kernel sources | |
|
|
45 | if [ "$KERNEL_RMSRC" = true ]; then | |
|
|
46 | rm -fr $R/usr/src/linux | |
|
|
47 | fi | |
|
|
35 | 48 | |
|
|
36 | 49 | # Install raspberry bootloader and flash-kernel |
|
|
37 | 50 | chroot_exec apt-get -qq -y --no-install-recommends install raspberrypi-bootloader-nokernel |
|
|
38 | 51 | else |
|
|
39 | 52 | # Kernel installation |
|
|
40 | chroot_exec apt-get -qq -y --no-install-recommends install linux-image-${KERNEL} raspberrypi-bootloader-nokernel | |
|
|
53 | chroot_exec apt-get -qq -y --no-install-recommends install linux-image-${COLLABORA_KERNEL} raspberrypi-bootloader-nokernel | |
|
|
41 | 54 | |
|
|
42 | 55 | # Install flash-kernel last so it doesn't try (and fail) to detect the platform in the chroot |
|
|
43 | 56 | chroot_exec apt-get -qq -y install flash-kernel |
| @@ -63,7 +76,7 fi | |||
|
|
63 | 76 | echo "${CMDLINE}" >$R/boot/firmware/cmdline.txt |
|
|
64 | 77 | |
|
|
65 | 78 | # Set up firmware config |
|
|
66 |
install |
|
|
|
79 | install_readonly files/boot/config.txt $R/boot/firmware/config.txt | |
|
|
67 | 80 | |
|
|
68 | 81 | # Load snd_bcm2835 kernel module at boot time |
|
|
69 | 82 | if [ "$ENABLE_SOUND" = true ] ; then |
| @@ -93,10 +106,10 fi | |||
|
|
93 | 106 | mkdir -p $R/etc/modprobe.d/ |
|
|
94 | 107 | |
|
|
95 | 108 | # Blacklist sound modules |
|
|
96 |
install |
|
|
|
109 | install_readonly files/modprobe.d/raspi-blacklist.conf $R/etc/modprobe.d/raspi-blacklist.conf | |
|
|
97 | 110 | |
|
|
98 | 111 | # Create default fstab |
|
|
99 |
install |
|
|
|
112 | install_readonly files/mount/fstab $R/etc/fstab | |
|
|
100 | 113 | |
|
|
101 | 114 | # Avoid swapping and increase cache sizes |
|
|
102 |
install |
|
|
|
115 | install_readonly files/sysctl.d/81-rpi-vm.conf $R/etc/sysctl.d/81-rpi-vm.conf | |
| @@ -1,24 +1,25 | |||
|
|
1 | 1 | # |
|
|
2 |
# Setup |
|
|
|
2 | # Setup Networking | |
|
|
3 | 3 | # |
|
|
4 | 4 | |
|
|
5 | # Load utility functions | |
|
|
5 | 6 | . ./functions.sh |
|
|
6 | 7 | |
|
|
7 | 8 | # Set up IPv4 hosts |
|
|
8 | echo ${HOSTNAME} >$R/etc/hostname | |
|
|
9 | cat <<EOM >$R/etc/hosts | |
|
|
10 | 127.0.0.1 localhost | |
|
|
11 | 127.0.1.1 ${HOSTNAME} | |
|
|
12 | EOM | |
|
|
9 | install_readonly files/network/hostname $R/etc/hostname | |
|
|
10 | sed -i -e "s/^rpi2-jessie/${HOSTNAME}/" $R/etc/hostname | |
|
|
11 | ||
|
|
12 | install_readonly files/network/hosts $R/etc/hosts | |
|
|
13 | sed -i -e "s/rpi2-jessie/${HOSTNAME}/" $R/etc/hosts | |
|
|
13 | 14 | |
|
|
14 | 15 | if [ "$NET_ADDRESS" != "" ] ; then |
|
|
15 | NET_IP=$(echo ${NET_ADDRESS} | cut -f 1 -d'/') | |
|
|
16 | sed -i "s/^127.0.1.1/${NET_IP}/" $R/etc/hosts | |
|
|
16 | NET_IP=$(echo ${NET_ADDRESS} | cut -f 1 -d'/') | |
|
|
17 | sed -i "s/^127.0.1.1/${NET_IP}/" $R/etc/hosts | |
|
|
17 | 18 | fi |
|
|
18 | 19 | |
|
|
19 | 20 | # Set up IPv6 hosts |
|
|
20 | 21 | if [ "$ENABLE_IPV6" = true ] ; then |
|
|
21 | cat <<EOM >>$R/etc/hosts | |
|
|
22 | cat <<EOM >>$R/etc/hosts | |
|
|
22 | 23 | |
|
|
23 | 24 | ::1 localhost ip6-localhost ip6-loopback |
|
|
24 | 25 | ff02::1 ip6-allnodes |
| @@ -27,28 +28,18 EOM | |||
|
|
27 | 28 | fi |
|
|
28 | 29 | |
|
|
29 | 30 | # Place hint about network configuration |
|
|
30 | cat <<EOM >$R/etc/network/interfaces | |
|
|
31 | # Debian switched to systemd-networkd configuration files. | |
|
|
32 | # please configure your networks in '/etc/systemd/network/' | |
|
|
33 | source /etc/interfaces.d/*.conf | |
|
|
34 | EOM | |
|
|
31 | install_readonly files/network/interfaces $R/etc/network/interfaces | |
|
|
35 | 32 | |
|
|
36 | 33 | if [ "$ENABLE_DHCP" = true ] ; then |
|
|
37 | 34 | # Enable systemd-networkd DHCP configuration for interface eth0 |
|
|
38 |
|
|
|
|
39 | [Match] | |
|
|
40 | Name=eth0 | |
|
|
41 | ||
|
|
42 | [Network] | |
|
|
43 | DHCP=yes | |
|
|
44 | EOM | |
|
|
35 | install_readonly files/network/eth.network $R/etc/systemd/network/eth.network | |
|
|
45 | 36 | |
|
|
46 | 37 | # Set DHCP configuration to IPv4 only |
|
|
47 | if [ "$ENABLE_IPV6" = false ] ; then | |
|
|
48 | sed -i "s/^DHCP=yes/DHCP=v4/" $R/etc/systemd/network/eth.network | |
|
|
49 | fi | |
|
|
38 | if [ "$ENABLE_IPV6" = false ] ; then | |
|
|
39 | sed -i "s/^DHCP=yes/DHCP=v4/" $R/etc/systemd/network/eth.network | |
|
|
40 | fi | |
|
|
50 | 41 | else # ENABLE_DHCP=false |
|
|
51 | cat <<EOM >$R/etc/systemd/network/eth.network | |
|
|
42 | cat <<EOM >$R/etc/systemd/network/eth.network | |
|
|
52 | 43 | [Match] |
|
|
53 | 44 | Name=eth0 |
|
|
54 | 45 | |
| @@ -69,7 +60,7 chroot_exec systemctl enable systemd-networkd | |||
|
|
69 | 60 | |
|
|
70 | 61 | # Enable network stack hardening |
|
|
71 | 62 | if [ "$ENABLE_HARDNET" = true ] ; then |
|
|
72 |
install |
|
|
|
63 | install_readonly files/sysctl.d/81-rpi-net-hardening.conf $R/etc/sysctl.d/81-rpi-net-hardening.conf | |
|
|
73 | 64 | |
|
|
74 | 65 | # Enable resolver warnings about spoofed addresses |
|
|
75 | 66 | cat <<EOM >>$R/etc/host.conf |
| @@ -1,7 +1,8 | |||
|
|
1 | 1 | # |
|
|
2 | # Enable firewall based on iptables started by systemd service | |
|
|
2 | # Setup Firewall | |
|
|
3 | 3 | # |
|
|
4 | 4 | |
|
|
5 | # Load utility functions | |
|
|
5 | 6 | . ./functions.sh |
|
|
6 | 7 | |
|
|
7 | 8 | if [ "$ENABLE_IPTABLES" = true ] ; then |
| @@ -9,13 +10,13 if [ "$ENABLE_IPTABLES" = true ] ; then | |||
|
|
9 | 10 | mkdir -p "$R/etc/iptables" |
|
|
10 | 11 | |
|
|
11 | 12 | # Create iptables systemd service |
|
|
12 |
install |
|
|
|
13 | install_readonly files/iptables/iptables.service $R/etc/systemd/system/iptables.service | |
|
|
13 | 14 | |
|
|
14 | 15 | # Create flush-table script called by iptables service |
|
|
15 |
install |
|
|
|
16 | install_exec files/iptables/flush-iptables.sh $R/etc/iptables/flush-iptables.sh | |
|
|
16 | 17 | |
|
|
17 | 18 | # Create iptables rule file |
|
|
18 |
install |
|
|
|
19 | install_readonly files/iptables/iptables.rules $R/etc/iptables/iptables.rules | |
|
|
19 | 20 | |
|
|
20 | 21 | # Reload systemd configuration and enable iptables service |
|
|
21 | 22 | chroot_exec systemctl daemon-reload |
| @@ -23,12 +24,12 if [ "$ENABLE_IPTABLES" = true ] ; then | |||
|
|
23 | 24 | |
|
|
24 | 25 | if [ "$ENABLE_IPV6" = true ] ; then |
|
|
25 | 26 | # Create ip6tables systemd service |
|
|
26 |
install |
|
|
|
27 | install_readonly files/iptables/ip6tables.service $R/etc/systemd/system/ip6tables.service | |
|
|
27 | 28 | |
|
|
28 | 29 | # Create ip6tables file |
|
|
29 |
install |
|
|
|
30 | install_exec files/iptables/flush-ip6tables.sh $R/etc/iptables/flush-ip6tables.sh | |
|
|
30 | 31 | |
|
|
31 |
install |
|
|
|
32 | install_readonly files/iptables/ip6tables.rules $R/etc/iptables/ip6tables.rules | |
|
|
32 | 33 | |
|
|
33 | 34 | # Reload systemd configuration and enable iptables service |
|
|
34 | 35 | chroot_exec systemctl daemon-reload |
| @@ -2,6 +2,7 | |||
|
|
2 | 2 | # Setup users and security settings |
|
|
3 | 3 | # |
|
|
4 | 4 | |
|
|
5 | # Load utility functions | |
|
|
5 | 6 | . ./functions.sh |
|
|
6 | 7 | |
|
|
7 | 8 | # Generate crypt(3) password string |
| @@ -1,7 +1,8 | |||
|
|
1 | 1 | # |
|
|
2 |
# Setup |
|
|
|
2 | # Setup Logging | |
|
|
3 | 3 | # |
|
|
4 | 4 | |
|
|
5 | # Load utility functions | |
|
|
5 | 6 | . ./functions.sh |
|
|
6 | 7 | |
|
|
7 | 8 | # Disable rsyslog |
| @@ -1,7 +1,8 | |||
|
|
1 | 1 | # |
|
|
2 | # Setup Uboot | |
|
|
2 | # Build and Setup Uboot | |
|
|
3 | 3 | # |
|
|
4 | 4 | |
|
|
5 | # Load utility functions | |
|
|
5 | 6 | . ./functions.sh |
|
|
6 | 7 | |
|
|
7 | 8 | # Install gcc/c++ build environment inside the chroot |
| @@ -22,23 +23,9 if [ "$ENABLE_UBOOT" = true ] ; then | |||
|
|
22 | 23 | printf "\n# boot u-boot kernel\nkernel=u-boot.bin\n" >> $R/boot/firmware/config.txt |
|
|
23 | 24 | |
|
|
24 | 25 | # Set U-Boot command file |
|
|
25 | cat <<EOM >$R/boot/firmware/uboot.mkimage | |
|
|
26 | # Tell Linux that it is booting on a Raspberry Pi2 | |
|
|
27 | setenv machid 0x00000c42 | |
|
|
28 | ||
|
|
29 | # Set the kernel boot command line | |
|
|
30 | setenv bootargs "earlyprintk ${CMDLINE}" | |
|
|
31 | ||
|
|
32 | # Save these changes to u-boot's environment | |
|
|
33 | saveenv | |
|
|
34 | ||
|
|
35 | # Load the existing Linux kernel into RAM | |
|
|
36 | fatload mmc 0:1 \${kernel_addr_r} kernel7.img | |
|
|
37 | ||
|
|
38 | # Boot the kernel we have just loaded | |
|
|
39 | bootz \${kernel_addr_r} | |
|
|
40 | EOM | |
|
|
26 | install_readonly files/boot/uboot.mkimage $R/boot/firmware/uboot.mkimage | |
|
|
27 | printf "# Set the kernel boot command line\nsetenv bootargs \"earlyprintk ${CMDLINE}\"\n\n$(cat $R/boot/firmware/uboot.mkimage)" > $R/boot/firmware/uboot.mkimage | |
|
|
41 | 28 | |
|
|
42 | 29 | # Generate U-Boot image from command file |
|
|
43 |
chroot_exec mkimage -A arm -O linux -T script -C none -a 0x00000000 -e 0x00000000 -n |
|
|
|
30 | chroot_exec /tmp/u-boot/tools/mkimage -A arm -O linux -T script -C none -a 0x00000000 -e 0x00000000 -n RPi2 -d /boot/firmware/uboot.mkimage /boot/firmware/boot.scr | |
|
|
44 | 31 | fi |
| @@ -1,7 +1,8 | |||
|
|
1 | 1 | # |
|
|
2 |
# |
|
|
|
2 | # Build and Setup fbturbo Xorg driver | |
|
|
3 | 3 | # |
|
|
4 | 4 | |
|
|
5 | # Load utility functions | |
|
|
5 | 6 | . ./functions.sh |
|
|
6 | 7 | |
|
|
7 | 8 | if [ "$ENABLE_FBTURBO" = true ] ; then |
| @@ -12,17 +13,16 if [ "$ENABLE_FBTURBO" = true ] ; then | |||
|
|
12 | 13 | chroot_exec apt-get install -q -y --no-install-recommends xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev |
|
|
13 | 14 | |
|
|
14 | 15 | # Build and install fbturbo driver inside chroot |
|
|
15 | chroot_exec /bin/bash -c "cd /tmp/xf86-video-fbturbo; autoreconf -vi; ./configure --prefix=/usr; make; make install" | |
|
|
16 | chroot_exec /bin/bash -x <<'EOF' | |
|
|
17 | cd /tmp/xf86-video-fbturbo | |
|
|
18 | autoreconf -vi | |
|
|
19 | ./configure --prefix=/usr | |
|
|
20 | make | |
|
|
21 | make install | |
|
|
22 | EOF | |
|
|
16 | 23 | |
|
|
17 | 24 | # Add fbturbo driver to Xorg configuration |
|
|
18 |
|
|
|
|
19 | Section "Device" | |
|
|
20 | Identifier "Allwinner A10/A13 FBDEV" | |
|
|
21 | Driver "fbturbo" | |
|
|
22 | Option "fbdev" "/dev/fb0" | |
|
|
23 | Option "SwapbuffersWait" "true" | |
|
|
24 | EndSection | |
|
|
25 | EOM | |
|
|
25 | install_readonly files/xorg/99-fbturbo.conf $R/usr/share/X11/xorg.conf.d/99-fbturbo.conf | |
|
|
26 | 26 | |
|
|
27 | 27 | # Remove Xorg build dependencies |
|
|
28 | 28 | chroot_exec apt-get -q -y purge --auto-remove xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev |
| @@ -2,8 +2,10 | |||
|
|
2 | 2 | # First boot actions |
|
|
3 | 3 | # |
|
|
4 | 4 | |
|
|
5 | # Load utility functions | |
|
|
5 | 6 | . ./functions.sh |
|
|
6 | 7 | |
|
|
8 | # Prepare rc.firstboot script | |
|
|
7 | 9 | cat files/firstboot/10-begin.sh > $R/etc/rc.firstboot |
|
|
8 | 10 | |
|
|
9 | 11 | # Ensure openssh server host keys are regenerated on first boot |
| @@ -12,13 +14,16 if [ "$ENABLE_SSHD" = true ] ; then | |||
|
|
12 | 14 | rm -f $R/etc/ssh/ssh_host_* |
|
|
13 | 15 | fi |
|
|
14 | 16 | |
|
|
17 | # Prepare filesystem auto expand | |
|
|
15 | 18 | if [ "$EXPANDROOT" = true ] ; then |
|
|
16 | 19 | cat files/firstboot/22-expandroot.sh >> $R/etc/rc.firstboot |
|
|
17 | 20 | fi |
|
|
18 | 21 | |
|
|
22 | # Finalize rc.firstboot script | |
|
|
19 | 23 | cat files/firstboot/99-finish.sh >> $R/etc/rc.firstboot |
|
|
20 | 24 | chmod +x $R/etc/rc.firstboot |
|
|
21 | 25 | |
|
|
26 | # Add rc.firstboot script to rc.local | |
|
|
22 | 27 | sed -i '/exit 0/d' $R/etc/rc.local |
|
|
23 | 28 | echo /etc/rc.firstboot >> $R/etc/rc.local |
|
|
24 | 29 | echo exit 0 >> $R/etc/rc.local |
|
|
1 | NO CONTENT: file renamed from files/config.txt to files/boot/config.txt |
|
|
1 | NO CONTENT: file renamed from files/fstab to files/mount/fstab |
| @@ -1,11 +1,16 | |||
|
|
1 | # This file contains utility functions used by rpi2-gen-image.sh | |
|
|
2 | ||
|
|
1 | 3 | cleanup (){ |
|
|
2 | # Clean up all temporary mount points | |
|
|
3 | 4 |
|
|
|
4 | 5 | set +e |
|
|
6 | ||
|
|
7 | # Identify and kill all processes still using files | |
|
|
5 | 8 | echo "killing processes using mount point ..." |
|
|
6 | 9 | fuser -k $R |
|
|
7 | 10 | sleep 3 |
|
|
8 | 11 | fuser -9 -k -v $R |
|
|
12 | ||
|
|
13 | # Clean up all temporary mount points | |
|
|
9 | 14 | echo "removing temporary mount points ..." |
|
|
10 | 15 | umount -l $R/proc 2> /dev/null |
|
|
11 | 16 | umount -l $R/sys 2> /dev/null |
| @@ -21,3 +26,13 chroot_exec() { | |||
|
|
21 | 26 | # Exec command in chroot |
|
|
22 | 27 | LANG=C LC_ALL=C DEBIAN_FRONTEND=noninteractive chroot $R $* |
|
|
23 | 28 | } |
|
|
29 | ||
|
|
30 | install_readonly() { | |
|
|
31 | # Install file with user read-only permissions | |
|
|
32 | install -o root -g root -m 644 $* | |
|
|
33 | } | |
|
|
34 | ||
|
|
35 | install_exec() { | |
|
|
36 | # Install file with root exec permissions | |
|
|
37 | install -o root -g root -m 744 $* | |
|
|
38 | } | |
| @@ -15,14 +15,16 | |||
|
|
15 | 15 | # Copyright (C) 2015 Luca Falavigna <dktrkranz@debian.org> |
|
|
16 | 16 | ######################################################################## |
|
|
17 | 17 | |
|
|
18 | source ./functions.sh | |
|
|
18 | # Load utility functions | |
|
|
19 | . ./functions.sh | |
|
|
19 | 20 | |
|
|
20 | 21 | set -e |
|
|
22 | echo -n -e "\n#\n# RPi2 Bootstrap Settings\n#\n" | |
|
|
21 | 23 | set -x |
|
|
22 | 24 | |
|
|
23 | 25 | # Debian release |
|
|
24 | 26 | RELEASE=${RELEASE:=jessie} |
|
|
25 | KERNEL=${KERNEL:=3.18.0-trunk-rpi2} | |
|
|
27 | COLLABORA_KERNEL=${COLLABORA_KERNEL:=3.18.0-trunk-rpi2} | |
|
|
26 | 28 | |
|
|
27 | 29 | # Build settings |
|
|
28 | 30 | BASEDIR=$(pwd)/images/${RELEASE} |
| @@ -33,16 +35,19 HOSTNAME=${HOSTNAME:=rpi2-${RELEASE}} | |||
|
|
33 | 35 | PASSWORD=${PASSWORD:=raspberry} |
|
|
34 | 36 | DEFLOCAL=${DEFLOCAL:="en_US.UTF-8"} |
|
|
35 | 37 | TIMEZONE=${TIMEZONE:="Europe/Berlin"} |
|
|
36 | XKBMODEL=${XKBMODEL:=""} | |
|
|
37 | XKBLAYOUT=${XKBLAYOUT:=""} | |
|
|
38 | XKBVARIANT=${XKBVARIANT:=""} | |
|
|
39 | XKBOPTIONS=${XKBOPTIONS:=""} | |
|
|
40 | 38 | EXPANDROOT=${EXPANDROOT:=true} |
|
|
41 | 39 | |
|
|
42 |
# |
|
|
|
40 | # Keyboard settings | |
|
|
41 | XKB_MODEL=${XKB_MODEL:=""} | |
|
|
42 | XKB_LAYOUT=${XKB_LAYOUT:=""} | |
|
|
43 | XKB_VARIANT=${XKB_VARIANT:=""} | |
|
|
44 | XKB_OPTIONS=${XKB_OPTIONS:=""} | |
|
|
45 | ||
|
|
46 | # Network settings (DHCP) | |
|
|
43 | 47 | ENABLE_DHCP=${ENABLE_DHCP:=true} |
|
|
44 | # NET_* settings are ignored when ENABLE_DHCP=true | |
|
|
45 | # NET_ADDRESS is an IPv4 or IPv6 address and its prefix, separated by "/" | |
|
|
48 | ||
|
|
49 | # Network settings (static) | |
|
|
50 | # only used on ENABLE_DHCP=false | |
|
|
46 | 51 | NET_ADDRESS=${NET_ADDRESS:=""} |
|
|
47 | 52 | NET_GATEWAY=${NET_GATEWAY:=""} |
|
|
48 | 53 | NET_DNS_1=${NET_DNS_1:=""} |
| @@ -79,7 +84,9 ENABLE_IPTABLES=${ENABLE_IPTABLES:=false} | |||
|
|
79 | 84 | |
|
|
80 | 85 | # Kernel compilation settings |
|
|
81 | 86 | BUILD_KERNEL=${BUILD_KERNEL:=false} |
|
|
87 | KERNEL_THREADS=${KERNEL_THREADS:=1} | |
|
|
82 | 88 | KERNEL_HEADERS=${KERNEL_HEADERS:=true} |
|
|
89 | KERNEL_RMSRC=${KERNEL_RMSRC:=true} | |
|
|
83 | 90 | |
|
|
84 | 91 | # Image chroot path |
|
|
85 | 92 | R=${BUILDDIR}/chroot |
| @@ -206,6 +213,7 fi | |||
|
|
206 | 213 | |
|
|
207 | 214 | ## Main bootstrap |
|
|
208 | 215 | for i in bootstrap.d/*.sh; do |
|
|
216 | head -n 3 $i | |
|
|
209 | 217 | . $i |
|
|
210 | 218 | done |
|
|
211 | 219 | |
| @@ -298,7 +306,7 rsync -a "$R/" "$BUILDDIR/mount/" | |||
|
|
298 | 306 | # Unmount all temporary loop devices and mount points |
|
|
299 | 307 | cleanup |
|
|
300 | 308 | |
|
|
301 |
# |
|
|
|
309 | # Create block map file for "bmaptool" | |
|
|
302 | 310 | bmaptool create -o "$BASEDIR/${DATE}-debian-${RELEASE}.bmap" "$BASEDIR/${DATE}-debian-${RELEASE}.img" |
|
|
303 | 311 | |
|
|
304 | 312 | # Image was successfully created |
General Comments 0
Vous devez vous connecter pour laisser un commentaire.
Se connecter maintenant
