##// END OF EJS Templates
Use 4.14.y as default kernel version...
BrainStone -
r394:5d19d305a4db
parent child
Show More
@@ -1,450 +1,450
1 1 ## 介绍
2 `rpi23-gen-image.sh` 是一个自动生成树莓派2/3系统镜像的脚本工具, 当前支持自动生成32位 armhf 架构的Debian, 发行版本`jessie`, `stretch``buster`. 树莓派3 64位镜像需要使用特定的配置参数 (```templates/rpi3-stretch-arm64-4.11.y```).
2 `rpi23-gen-image.sh` 是一个自动生成树莓派2/3系统镜像的脚本工具, 当前支持自动生成32位 armhf 架构的Debian, 发行版本`jessie`, `stretch``buster`. 树莓派3 64位镜像需要使用特定的配置参数 (```templates/rpi3-stretch-arm64-4.14.y```).
3 3
4 4 ## 构建环境所依赖的包
5 5 一定要安装好下列deb包, 他们是构建过程需要的核心包. 脚本会自动检查, 如果缺少,经用户确认后会自动安装.
6 6
7 7 ```debootstrap debian-archive-keyring qemu-user-static binfmt-support dosfstools rsync bmap-tools whois git bc psmisc dbus sudo```
8 8
9 9 推荐通过配置 `rpi23-gen-image.sh` 脚本编译安装最新的树莓派 Linux 内核, 对于树莓派3, 只能如此. 在构建系统上使用 ARM (armhf) 交叉编译工具链编译内核.
10 10
11 11 脚本已经在Debian Liux `jessie` 和`stretch` 构建系统下使用默认的 `crossbuild-essential-armhf` 工具链进行过测试. 获取更多信息请查看 [Debian 交叉工具链 Wiki](https://wiki.debian.org/CrossToolchains) .
12 12
13 13 如果使用Debian Linux `jessie` 构建系统, 先要添加交叉编译工具链的源 [Debian 交叉工具链仓库](http://emdebian.org/tools/debian/):
14 14
15 15 ```
16 16 echo "deb http://emdebian.org/tools/debian/ jessie main" > /etc/apt/sources.list.d/crosstools.list
17 17 sudo -u nobody wget -O - http://emdebian.org/tools/debian/emdebian-toolchain-archive.key | apt-key add -
18 18 dpkg --add-architecture armhf
19 19 apt-get update
20 20 ```
21 21
22 22 ## 命令行参数
23 23 脚本可以使用特定的命令行参数来允许或禁止操作系统的某些特性、服务和配置信息. 这些参数通过(简单)脚本变量传递给 `rpi23-gen-image.sh`. 不同于环境变量, (简单)脚本变量在调用`rpi23-gen-image.sh`的命令行前面定义.
24 24
25 25 ##### 命令行示例:
26 26 ```shell
27 27 ENABLE_UBOOT=true ./rpi23-gen-image.sh
28 28 ENABLE_CONSOLE=false ENABLE_IPV6=false ./rpi23-gen-image.sh
29 29 ENABLE_WM=xfce4 ENABLE_FBTURBO=true ENABLE_MINBASE=true ./rpi23-gen-image.sh
30 30 ENABLE_HARDNET=true ENABLE_IPTABLES=true /rpi23-gen-image.sh
31 31 APT_SERVER=ftp.de.debian.org APT_PROXY="http://127.0.0.1:3142/" ./rpi23-gen-image.sh
32 32 ENABLE_MINBASE=true ./rpi23-gen-image.sh
33 33 BUILD_KERNEL=true ENABLE_MINBASE=true ENABLE_IPV6=false ./rpi23-gen-image.sh
34 34 BUILD_KERNEL=true KERNELSRC_DIR=/tmp/linux ./rpi23-gen-image.sh
35 35 ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
36 36 ENABLE_CRYPTFS=true CRYPTFS_PASSWORD=changeme EXPANDROOT=false ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
37 37 RELEASE=stretch BUILD_KERNEL=true ./rpi23-gen-image.sh
38 38 RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
39 39 RELEASE=stretch RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
40 40 ```
41 41
42 42 ## 参数模板文件
43 43 为了避免冗长的命令行参数以及存储感兴趣的参数配置, `rpi23-gen-image.sh` 支持所谓的参数模板文件 (`CONFIG_TEMPLATE`=template). 这些文本文件位于 `./templates` 目录, 文件中含有将会使用的配置参数. 新的配置模板文件会被添加到 `./templates` 目录.
44 44
45 45 ##### 命令行示例:
46 46 ```shell
47 47 CONFIG_TEMPLATE=rpi3stretch ./rpi23-gen-image.sh
48 48 CONFIG_TEMPLATE=rpi2stretch ./rpi23-gen-image.sh
49 49 ```
50 50
51 51 ## 支持的参数和设置
52 52 #### APT 设置:
53 53 ##### `APT_SERVER`="ftp.debian.org"
54 54 设置 Debian 仓库地址. 选择一个 [镜像站点](https://www.debian.org/mirror/list). 选一个近的镜像站点会加快镜像生成过程中所需文件的下载速度.
55 55
56 56 ##### `APT_PROXY`=""
57 57 设置代理服务器地址. 使用本地缓存代理, 比如 `apt-cacher-ng` 可以缩短镜像生成时间, 因为所需要的 Debian 包文件只需下载一次.
58 58
59 59 ##### `APT_INCLUDES`=""
60 60 生成镜像过程中最先由debootstrap程序自动安装的附加包, 逗号分隔.
61 61
62 62 ##### `APT_INCLUDES_LATE`=""
63 63 生成镜像过程中最初的debootstrap完成后, 需要的使用apt命令安装的附加包, 逗号分隔. 特别用在含有 pre-depend 依赖关系的包的, 其依赖关系在打包过程中debootstrap程序中无法正确处理.
64 64
65 65 ---
66 66
67 67 #### 通用系统设置:
68 68 ##### `RPI_MODEL`=2
69 69 指定树莓派型号. 当前支持树莓派 `2``3`. 设为 `3``BUILD_KERNEL` 自动设为true .
70 70
71 71 ##### `RELEASE`="jessie"
72 72 设置 Debian 发行版. 脚本当前支持 Debian 发行版 "jessie", "stretch" 和 "buster" 的自动生成. 设为`stretch` 或 `buster``BUILD_KERNEL` 自动设为true.
73 73
74 74 ##### `RELEASE_ARCH`="armhf"
75 75 设置期望的 Debian 发行架构.
76 76
77 77 ##### `HOSTNAME`="rpi$RPI_MODEL-$RELEASE"
78 78 设置主机名称. 建议所在的子网中主机名称是唯一的.
79 79
80 80 ##### `PASSWORD`="raspberry"
81 81 设置系统的 `root` 用户密码. **强烈**建议选择一个自定义密码 .
82 82
83 83 ##### `USER_PASSWORD`="raspberry"
84 84 设置由 `USER_NAME`=pi 参数创建的普通用户的密码. 如果 `ENABLE_USER`=false 则忽略. **强烈**建议选择一个自定义密码.
85 85
86 86 ##### `DEFLOCAL`="en_US.UTF-8"
87 87 设置系统默认 locale. 将来可以在运行的系统中执行 `dpkg-reconfigure locales` 命令更改此项设置. 设置这项脚本会自动安装 `locales`, `keyboard-configuration``console-setup` 三个包.
88 88
89 89 ##### `TIMEZONE`="Europe/Berlin"
90 90 设置系统默认时区. 可以在`/usr/share/zoneinfo/` 目录中找到全部可用时区. 将来可以在运行的系统中执行 `dpkg-reconfigure tzdata` 命令更改此项设置.
91 91
92 92 ##### `EXPANDROOT`=true
93 93 第一次运行时自动扩展根分区和文件系统.
94 94
95 95 ---
96 96
97 97 #### 键盘设置:
98 98 这些选项用来配置键盘布局文件 `/etc/default/keyboard` 影响控制台和X窗口. 将来可以在运行的系统中执行 `dpkg-reconfigure keyboard-configuration` 命令更改此项设置.
99 99
100 100 ##### `XKB_MODEL`=""
101 101 设置键盘类型, 大陆常见pc104.
102 102
103 103 ##### `XKB_LAYOUT`=""
104 104 设置键盘布局, 大陆常见us.
105 105
106 106 ##### `XKB_VARIANT`=""
107 107 设置键盘布局变种.
108 108
109 109 ##### `XKB_OPTIONS`=""
110 110 设置其它 XKB 配置选项.
111 111
112 112 ---
113 113
114 114 #### 网络设置 (动态):
115 115 设置网络为自动获取IP地址. 配置文件位于 `/etc/systemd/network/eth.network`. 在Debian `stretch`中, 默认位置更改为 `/lib/systemd/network`.
116 116
117 117 ##### `ENABLE_DHCP`=true
118 118 设置系统使用 DHCP 获取动态IP. 需要有一个 DHCP 服务器.
119 119
120 120 ---
121 121
122 122 #### 网络设置 (静态):
123 123 设置系统为手动配置IP地址. 配置文件位于 `/etc/systemd/network/eth.network`. 在Debian `stretch` 中, 默认位置更改为 `/lib/systemd/network`.
124 124 `ENABLE_DHCP`=false 时下面这些静态IP设置才起作用.
125 125
126 126 ##### `NET_ADDRESS`=""
127 127 设置静态 IPv4 或 IPv6, 使用CIDR "/"形式, 如 "192.169.0.3/24".
128 128
129 129 ##### `NET_GATEWAY`=""
130 130 设置默认网关的地址.
131 131
132 132 ##### `NET_DNS_1`=""
133 133 设置主域名服务器地址.
134 134
135 135 ##### `NET_DNS_2`=""
136 136 设置辅域名服务器地址.
137 137
138 138 ##### `NET_DNS_DOMAINS`=""
139 139 设置默认的域名搜索后缀, 当主机名称不是一个完整域名(FQDN)时使用.
140 140
141 141 ##### `NET_NTP_1`=""
142 142 设置主时间服务器地址.
143 143
144 144 ##### `NET_NTP_2`=""
145 145 设置辅时间服务器地址.
146 146
147 147 ---
148 148
149 149 #### 基本系统特性:
150 150 ##### `ENABLE_CONSOLE`=true
151 151 允许串行控制台接口. 没有连接显示器键盘的树莓派推荐打开, 此时如果网络无法连接至树莓派, 可以使用串行控制台连至系统.
152 152
153 153 ##### `ENABLE_I2C`=false
154 154 允许树莓派2/3的 I2C 接口. 请对照 [树莓派2/3 引脚示意图](https://elinux.org/RPi_Low-level_peripherals) 正确连接 GPIO 引脚.
155 155
156 156 ##### `ENABLE_SPI`=false
157 157 允许树莓派2/3的 SPI 接口. 请对照 [树莓派2/3 引脚示意图](https://elinux.org/RPi_Low-level_peripherals) 正确连接 GPIO 引脚.
158 158
159 159 ##### `ENABLE_IPV6`=true
160 160 允许 IPv6 . 通过 systemd-networkd 配置管理网络接口.
161 161
162 162 ##### `ENABLE_SSHD`=true
163 163 安装并且允许 OpenSSH 服务. 此服务默认禁止 `root` 用户远程登录. 使用普通用户 `pi` 远程登录然后使用 `su -``sudo` 来取得root权限.
164 164
165 165 ##### `ENABLE_NONFREE`=false
166 166 允许安装仓库中的 non-free 类的软件包. 需要安装闭源的固件, 二进制大对象 blob.
167 167
168 168 ##### `ENABLE_WIRELESS`=false
169 169 下载安装树莓派3无线接口所需要的闭源固件 二进制blob [树莓派3无线接口固件](https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm80211/brcm). 如果 `RPI_MODEL` 不是 `3` 则忽略.
170 170
171 171 ##### `ENABLE_RSYSLOG`=true
172 172 如果设置为 false, 禁用并卸载 rsyslog, 则只能通过日志文件查看logs.
173 173
174 174 ##### `ENABLE_SOUND`=true
175 175 允许声卡并且安装 ALSA.
176 176
177 177 ##### `ENABLE_HWRANDOM`=true
178 178 允许硬件随机数发生器. 强随机数对大多数使用加密的网络通信是非常重要的. 推荐允许此设置.
179 179
180 180 ##### `ENABLE_MINGPU`=false
181 181 最小化显存 (16MB, no X), 目前无法完全禁用GPU.
182 182
183 183 ##### `ENABLE_DBUS`=true
184 184 安装并允许 D-Bus 消息总线. 虽然 systemd 可以在没有 D-bus的情况下工作, 但是推荐允许D-Bus.
185 185
186 186 ##### `ENABLE_XORG`=false
187 187 是否安装 Xorg, 开源 X11 系统.
188 188
189 189 ##### `ENABLE_WM`=""
190 190 安装用户指定的X Window 窗口管理器. 如果设置了`ENABLE_WM`, 系统确定所有被依赖的X11相关软件包都安装好了以后`ENABLE_XORG`会自动设置为true, `rpi23-gen-image.sh` 脚本已经通过下列窗口管理器的测试: `blackbox`, `openbox`, `fluxbox`, `jwm`, `dwm`, `xfce4`, `awesome`.
191 191
192 192 ---
193 193
194 194 #### 高级系统特性:
195 195 ##### `ENABLE_MINBASE`=false
196 196 使用 debootstrap 脚本变量 `minbase`, 只含有必不可少的核心包和apt. 体积大约 65 MB.
197 197
198 198 ##### `ENABLE_REDUCE`=false
199 199 卸载包、删除文件以减小体积 详情查看 `REDUCE_*` 参数.
200 200
201 201 ##### `ENABLE_UBOOT`=false
202 202 使用 [U-Boot 引导器](https://git.denx.de/?p=u-boot.git;a=summary) 替代树莓派2/3 默认的第二阶段引导器(bootcode.bin). U-Boot 可以通过网络使用 BOOTP/TFTP 协议引导镜像文件.
203 203
204 204 ##### `UBOOTSRC_DIR`=""
205 205 存放已下载 [U-Boot 引导器源文件](https://git.denx.de/?p=u-boot.git;a=summary) 的目录(`u-boot`).
206 206
207 207 ##### `ENABLE_FBTURBO`=false
208 208 安装并且允许 [硬件加速的 Xorg 显卡驱动](https://github.com/ssvb/xf86-video-fbturbo) `fbturbo`. 当前仅支持窗口的移动和滚动的硬件加速.
209 209
210 210 ##### `FBTURBOSRC_DIR`=""
211 211 设置存放已下载的 [硬件加速的 Xorg 显卡驱动](https://github.com/ssvb/xf86-video-fbturbo) 的目录 (`xf86-video-fbturbo`) , 可以复制到chroot内配置、构建和安装.
212 212
213 213 ##### `ENABLE_IPTABLES`=false
214 214 允许 iptables 防火墙. 使用最简单的规则集: 允许所有出站连接;禁止除OpenSSH外的所有入站连接.
215 215
216 216 ##### `ENABLE_USER`=true
217 217 创建普通用户, 默认用户名`pi`, 默认密码raspberry. 可以使用 `USER_NAME`=user 更改默认用户名;使用 `USER_PASSWORD`=raspberry 更改默认密码.
218 218
219 219 ##### `USER_NAME`=pi
220 220 创建普通用户pi. 如果`ENABLE_USER`=false 此参数被忽略.
221 221
222 222 ##### `ENABLE_ROOT`=false
223 223 允许root用户登录, 需要设置 root 用户密码.
224 224
225 225 ##### `ENABLE_HARDNET`=false
226 226 允许加固 IPv4/IPv6 协议栈, 防止DoS攻击.
227 227
228 228 ##### `ENABLE_SPLITFS`=false
229 229 允许将根分区放在USB驱动器中. 将会生成两个镜像文件, 一个挂载为 `/boot/firmware` , 另一个挂载为 `/`.
230 230
231 231 ##### `CHROOT_SCRIPTS`=""
232 232 设置自定义脚本目录的路径, 该目录中的脚本在镜像文件构建完成之前在chroot中运行. 这个目录里的可执行文件按着字典序运行.
233 233
234 234 ##### `ENABLE_INITRAMFS`=false
235 235 创建 Linux 启动时加载的 initramfs .如果 `ENABLE_CRYPTFS`=true 那么 `ENABLE_INITRAMFS` 自动设为true . 如果 `BUILD_KERNEL`=false 此参数被忽略.
236 236
237 237 ##### `ENABLE_IFNAMES`=true
238 238 允许一致/可预测网络接口命名, 支持 Debian 发行版 `stretch``buster` .
239 239
240 240 ##### `DISABLE_UNDERVOLT_WARNINGS`=
241 241 禁止树莓派2/3 的低电压警告. 设为 `1` 禁止警告. 设为 `2` 额外允许低电压下的turbo增强模式.
242 242
243 243 ---
244 244
245 245 #### SSH 设置:
246 246 ##### `SSH_ENABLE_ROOT`=false
247 247 允许root通过密码验证方式远程登录系统. 如果没有修改默认密码, 这将是个巨大的安全隐患. `ENABLE_ROOT` 必须设为 `true`.
248 248
249 249 ##### `SSH_DISABLE_PASSWORD_AUTH`=false
250 250 禁用SSH的密码验证方式, 只支持SSH (v2)的公钥认证.
251 251
252 252 ##### `SSH_LIMIT_USERS`=false
253 253 限制通过SSH远程登录的用户. 只允许由 `USER_NAME`=pi 参数创建的普通用户, 以及当 `SSH_ENABLE_ROOT`=true 时 root 用户远程登录. 如果使用的守护程序是 `dropbear` (通过 `REDUCE_SSHD`=true 设置) 则忽略此参数.
254 254
255 255 ##### `SSH_ROOT_PUB_KEY`=""
256 256 从指定文件(可包含多个公钥)添加 SSH (v2) 公钥到 `authorized_keys` 文件, 使得 `root` 用户可以使用SSH (v2)的公钥验证方式远程登录, 不支持SSH (v1). `ENABLE_ROOT` **和** `SSH_ENABLE_ROOT` 必须同时设为 `true`.
257 257
258 258 ##### `SSH_USER_PUB_KEY`=""
259 259 从指定文件(可包含多个公钥)添加 SSH (v2) 公钥到 `authorized_keys` 文件, 使得由 `USER_NAME`=pi 参数创建的普通用户可以使用SSH (v2)的公钥验证方式远程登录, 不支持SSH (v1).
260 260
261 261 ---
262 262
263 263 #### 内核编译:
264 264 ##### `BUILD_KERNEL`=false
265 265 构建安装最新的树莓派 2/3 Linux 内核, 当前只支持默认内核配置. 如果设置为树莓派`3`那么自动设置`BUILD_KERNEL`=true .
266 266
267 267 ##### `CROSS_COMPILE`="arm-linux-gnueabihf-"
268 268 设置交叉编译器.
269 269
270 270 ##### `KERNEL_ARCH`="arm"
271 271 设置内核架构.
272 272
273 273 ##### `KERNEL_IMAGE`="kernel7.img"
274 274 内核镜像名称, 如果没有设置, 编译32位内核默认“kernel7.img” 64位内核默认 "kernel8.img".
275 275
276 276 ##### `KERNEL_BRANCH`=""
277 277 GIT里的树莓派内核源代码分支名称, 默认使用当前默认分支.
278 278
279 279 ##### `QEMU_BINARY`="/usr/bin/qemu-arm-static"
280 280 设置构建系统中的QEMU程序位置. 如果没有设置, 32位内核默认 “/usr/bin/qemu-arm-static” 64位内核默认 "/usr/bin/qemu-aarch64-static".
281 281
282 282 ##### `KERNEL_DEFCONFIG`="bcm2709_defconfig"
283 283 设置编译内核的默认配置. 如果没有设置, 32位内核默认"bcm2709_defconfig" 64位内核默认"bcmrpi3\_defconfig".
284 284
285 285 ##### `KERNEL_REDUCE`=false
286 286 缩小内核体积, 移除不想要的设备驱动、网络驱动和文件系统驱动 (实验性质).
287 287
288 288 ##### `KERNEL_THREADS`=1
289 289 编译内核时的并发线程数量. 如果使用默认设置, 系统会自动检测CPU的内核数量, 设置线程数量, 加速内核编译.
290 290
291 291 ##### `KERNEL_HEADERS`=true
292 292 安装内核相应的头文件.
293 293
294 294 ##### `KERNEL_MENUCONFIG`=false
295 295 运行`make menuconfig`使用菜单界面配置内核. 退出配置菜单后脚本继续运行.
296 296
297 297 ##### `KERNEL_REMOVESRC`=true
298 298 编译安装完成后, 删掉内核源代码, 产生的镜像不含内核源代码.
299 299
300 300 ##### `KERNELSRC_DIR`=""
301 301 已下载好的 [Github上的树莓派官方内核](https://github.com/raspberrypi/linux) 源码所在目录 (`linux`) 的路径, 可以复制到chroot内配置、构建和安装.
302 302
303 303 ##### `KERNELSRC_CLEAN`=false
304 304 当`KERNELSRC_DIR`被复制到 chroot 之后开始编译之前(使用 `make mrproper`)清理内核源代码. 如果 `KERNELSRC_DIR` 没有设置或者 `KERNELSRC_PREBUILT`=true时忽略此设置.
305 305
306 306 ##### `KERNELSRC_CONFIG`=true
307 307 在编译前使用 `make bcm2709_defconfig` (也可以选择 `make menuconfig`) 配置内核源代码. 如果`KERNELSRC_DIR`指定的源码存放目录不存在,这个参数自动设为 `true`. 如果 `KERNELSRC_PREBUILT`=true 忽略此参数.
308 308
309 309 ##### `KERNELSRC_USRCONFIG`=""
310 310 复制自己的配置文件到内核的 `.config`. 如果 `KERNEL_MENUCONFIG`=true 拷贝完成后自动运行 make menuconfig.
311 311
312 312 ##### `KERNELSRC_PREBUILT`=false
313 313 如果这个参数设为true 表示内核源代码目录中包含成功交叉编译好的内核. 忽略 `KERNELSRC_CLEAN`, `KERNELSRC_CONFIG`, `KERNELSRC_USRCONFIG` and `KERNEL_MENUCONFIG` 这四个参数,不再执行交叉编译操作.
314 314
315 315 ##### `RPI_FIRMWARE_DIR`=""
316 316 指定目录 (`firmware`) 含有已经从 [Github上的树莓派官方固件](https://github.com/raspberrypi/firmware)下载到本地的固件. 默认直接从网上下载最新的固件.
317 317
318 318 ---
319 319
320 320 #### 缩小体积:
321 321 如果 `ENABLE_REDUCE`=false 则忽略下列参数.
322 322
323 323 ##### `REDUCE_APT`=true
324 324 配置 APT,压缩仓库文件列表,不缓存下载的包文件.
325 325
326 326 ##### `REDUCE_DOC`=true
327 327 移除所有的doc文档文件(harsh). 配置 APT, 将来使用`apt-get`安装deb包时不包括doc文件.
328 328
329 329 ##### `REDUCE_MAN`=true
330 330 移除所有的man手册页和info文件 (harsh). 配置 APT, 将来使用`apt-get`安装deb包时不包括man手册页.
331 331
332 332 ##### `REDUCE_VIM`=false
333 333 使用vim的小型克隆 `levee` 替代 `vim-tiny`.
334 334
335 335 ##### `REDUCE_BASH`=false
336 336 使用 `dash` 代替 `bash` (实验性质).
337 337
338 338 ##### `REDUCE_HWDB`=true
339 339 移除与 PCI 相关的 hwdb 文件 (实验性质).
340 340
341 341 ##### `REDUCE_SSHD`=true
342 342 使用`dropbear`代替 `openssh-server`.
343 343
344 344 ##### `REDUCE_LOCALE`=true
345 345 移除所有的 `locale` 本地化文件.
346 346
347 347 ---
348 348
349 349 #### 加密根分区:
350 350 ##### `ENABLE_CRYPTFS`=false
351 351 使用dm-crypt进行全盘加密. 创建一个 LUKS 加密根分区 (加密方法 aes-xts-plain64:sha512) 并生成所需要的 initramfs. /boot 目录不会被加密. 当`BUILD_KERNEL`=false时忽略此参数. `ENABLE_CRYPTFS` 这个参数当前是实验性质的. SSH-to-initramfs 当前不支持,正在进行中.
352 352
353 353 ##### `CRYPTFS_PASSWORD`=""
354 354 设置根分区的加密密码. 如果 `ENABLE_CRYPTFS`=true,请务必设置此参数.
355 355
356 356 ##### `CRYPTFS_MAPPING`="secure"
357 357 设置device-mapper映射名称.
358 358
359 359 ##### `CRYPTFS_CIPHER`="aes-xts-plain64:sha512"
360 360 加密算法. 推荐 `aes-xts*`加密法.
361 361
362 362 ##### `CRYPTFS_XTSKEYSIZE`=512
363 363 设置密钥长度,8的倍数,以bit为单位.
364 364
365 365 ---
366 366
367 367 #### Build settings构建设置:
368 368 ##### `BASEDIR`=$(pwd)/images/${RELEASE}
369 369 设置产生镜像的目录.
370 370
371 371 ##### `IMAGE_NAME`=${BASEDIR}/${DATE}-${KERNEL_ARCH}-${KERNEL_BRANCH}-rpi${RPI_MODEL}-${RELEASE}-${RELEASE_ARCH}
372 372 设置镜像文件名. 如果`ENABLE_SPLITFS`=false则文件名$IMAGE_NAME.img 如果`ENABLE_SPLITFS`=true则文件名$IMAGE_NAME-frmw.img 和 $IMAGE_NAME-root.img. 如果没有设置 `KERNEL_BRANCH` 则使用 "CURRENT" .
373 373
374 374 ## 理解脚本
375 375 制作镜像的每个阶段所实现的功能都由各自的脚本完成, 位于 `bootstrap.d` 目录. 按着字典序执行:
376 376
377 377 | 脚本 | 说明 |
378 378 | --- | --- |
379 379 | `10-bootstrap.sh` | 生成基本系统 |
380 380 | `11-apt.sh` | 设置 APT 仓库源 |
381 381 | `12-locale.sh` | 设置 Locales 和 keyboard |
382 382 | `13-kernel.sh` | 编译安装树莓派 2/3 内核 |
383 383 | `14-fstab.sh` | 设置 fstab 和 initramfs |
384 384 | `15-rpi-config.sh` | 设置 RPi2/3 config and cmdline |
385 385 | `20-networking.sh` | 设置网络 |
386 386 | `21-firewall.sh` | 设置防火墙 |
387 387 | `30-security.sh` | 设置用户以及安全相关 |
388 388 | `31-logging.sh` | 设置日志 |
389 389 | `32-sshd.sh` | 设置 SSH 和公钥 |
390 390 | `41-uboot.sh` | 编译设置 U-Boot |
391 391 | `42-fbturbo.sh` | 编译设置 fbturbo Xorg 驱动 |
392 392 | `50-firstboot.sh` | 首次启动执行的任务 |
393 393 | `99-reduce.sh` | 缩小体积 |
394 394
395 395 所有需要拷贝到镜像文件的配置文件都位于 `files` 目录. 最好不要手动更改这些配置文件.
396 396
397 397 | 目录 | 说明 |
398 398 | --- | --- |
399 399 | `apt` | APT 管理配置文件 |
400 400 | `boot` | 引导文件 树莓派2/3配置文件 |
401 401 | `dpkg` | 包管理配置文件 |
402 402 | `etc` | 配置文件以及 rc 启动脚本 |
403 403 | `firstboot` | 首次引导执行的脚本 |
404 404 | `initramfs` | Initramfs 脚本 |
405 405 | `iptables` | 防火墙配置文件 |
406 406 | `locales` | Locales 配置 |
407 407 | `modules` | 内核模块配置 |
408 408 | `mount` | Fstab 配置 |
409 409 | `network` | 网络配置文件 |
410 410 | `sysctl.d` | 交换文件以及IP协议加固配置文件 |
411 411 | `xorg` | fbturbo Xorg 驱动配置 |
412 412
413 413 ## 自定义包和脚本
414 414 `packages` 目录里放置自定义deb包, 比如系统仓库里没有的软件.在安装完系统仓库中的包之后安装. 自定义包所依赖的deb包会自动从系统仓库下载. 不要把自定义包添加到 `APT_INCLUDES` 参数中.
415 415 `custom.d` 目录中的脚本会在其它安装都完成后, 创建镜像文件之前执行.
416 416
417 417 ## 记录镜像产生过程的信息
418 418 所有镜像产生过程的信息、`rpi23-gen-image.sh` 脚本执行的命令都可以通过shell的 `script` 命令保存到日志文件中:
419 419
420 420 ```shell
421 421 script -c 'APT_SERVER=ftp.de.debian.org ./rpi23-gen-image.sh' ./build.log
422 422 ```
423 423
424 424 ## 烧录镜像文件
425 425 `rpi23-gen-image.sh` 所生成的镜像文件需要使用 `bmaptool``dd` 烧录到 microSD 卡. `bmaptool` 速度快比 `dd` 聪明.
426 426
427 427 ##### 烧录示例:
428 428 ```shell
429 429 bmaptool copy ./images/jessie/2017-01-23-rpi3-jessie.img /dev/mmcblk0
430 430 dd bs=4M if=./images/jessie/2017-01-23-rpi3-jessie.img of=/dev/mmcblk0
431 431 ```
432 432 如果设置过 `ENABLE_SPLITFS`, 烧录 `-frmw` 文件到 microSD 卡, 烧录 `-root` 文件到 USB 驱动器:
433 433 ```shell
434 434 bmaptool copy ./images/jessie/2017-01-23-rpi3-jessie-frmw.img /dev/mmcblk0
435 435 bmaptool copy ./images/jessie/2017-01-23-rpi3-jessie-root.img /dev/sdc
436 436 ```
437 437 ## 每周镜像
438 438 这些镜像由JRWR'S I/O PORT提供, 每周日午夜UTC 0点编译!
439 439 * [Debian Stretch Raspberry Pi2/3 周构建镜像](https://jrwr.io/doku.php?id=projects:debianpi)
440 440
441 441 ## External links and references外部链接, 各种资源
442 442 * [Debian 全世界镜像列表](https://www.debian.org/mirror/list)
443 443 * [Debian 树莓派 2 Wiki](https://wiki.debian.org/RaspberryPi2)
444 444 * [Debian 交叉工具链 Wiki](https://wiki.debian.org/CrossToolchains)
445 445 * [Github上的树莓派官方固件](https://github.com/raspberrypi/firmware)
446 446 * [Github上的树莓派官方内核](https://github.com/raspberrypi/linux)
447 447 * [U-BOOT git 仓库](https://git.denx.de/?p=u-boot.git;a=summary)
448 448 * [Xorg DDX fbturbo驱动](https://github.com/ssvb/xf86-video-fbturbo)
449 449 * [树莓派3无线接口固件](https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm80211/brcm)
450 450 * [Collabora 树莓派2预编译内核](https://repositories.collabora.co.uk/debian/)
@@ -1,490 +1,490
1 1 # rpi23-gen-image
2 2 ## Introduction
3 `rpi23-gen-image.sh` is an advanced Debian Linux bootstrapping shell script for generating Debian OS images for Raspberry Pi 2 (RPi2) and Raspberry Pi 3 (RPi3) computers. The script at this time supports the bootstrapping of the Debian (armhf) releases `stretch` and `buster`. Raspberry Pi 3 images are generated for 32-bit mode only. Raspberry Pi 3 64-bit images can be generated using custom configuration parameters (```templates/rpi3-stretch-arm64-4.11.y```).
3 `rpi23-gen-image.sh` is an advanced Debian Linux bootstrapping shell script for generating Debian OS images for Raspberry Pi 2 (RPi2) and Raspberry Pi 3 (RPi3) computers. The script at this time supports the bootstrapping of the Debian (armhf) releases `stretch` and `buster`. Raspberry Pi 3 images are generated for 32-bit mode only. Raspberry Pi 3 64-bit images can be generated using custom configuration parameters (```templates/rpi3-stretch-arm64-4.14.y```).
4 4
5 5 ## Build dependencies
6 6 The following list of Debian packages must be installed on the build system because they are essentially required for the bootstrapping process. The script will check if all required packages are installed and missing packages will be installed automatically if confirmed by the user.
7 7
8 8 ```debootstrap debian-archive-keyring qemu-user-static binfmt-support dosfstools rsync bmap-tools whois git bc psmisc dbus sudo```
9 9
10 10 It is recommended to configure the `rpi23-gen-image.sh` script to build and install the latest Raspberry Pi Linux kernel. For the RPi3 this is mandatory. Kernel compilation and linking will be performed on the build system using an ARM (armhf) cross-compiler toolchain.
11 11
12 12 The script has been tested using the default `crossbuild-essential-armhf` toolchain meta package on Debian Linux `stretch` build systems. Please check the [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains) for further information.
13 13
14 14 ## Command-line parameters
15 15 The script accepts certain command-line parameters to enable or disable specific OS features, services and configuration settings. These parameters are passed to the `rpi23-gen-image.sh` script via (simple) shell-variables. Unlike environment shell-variables (simple) shell-variables are defined at the beginning of the command-line call of the `rpi23-gen-image.sh` script.
16 16
17 17 ##### Command-line examples:
18 18 ```shell
19 19 ENABLE_UBOOT=true ./rpi23-gen-image.sh
20 20 ENABLE_CONSOLE=false ENABLE_IPV6=false ./rpi23-gen-image.sh
21 21 ENABLE_WM=xfce4 ENABLE_FBTURBO=true ENABLE_MINBASE=true ./rpi23-gen-image.sh
22 22 ENABLE_HARDNET=true ENABLE_IPTABLES=true /rpi23-gen-image.sh
23 23 APT_SERVER=ftp.de.debian.org APT_PROXY="http://127.0.0.1:3142/" ./rpi23-gen-image.sh
24 24 ENABLE_MINBASE=true ./rpi23-gen-image.sh
25 25 BUILD_KERNEL=true ENABLE_MINBASE=true ENABLE_IPV6=false ./rpi23-gen-image.sh
26 26 BUILD_KERNEL=true KERNELSRC_DIR=/tmp/linux ./rpi23-gen-image.sh
27 27 ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
28 28 ENABLE_CRYPTFS=true CRYPTFS_PASSWORD=changeme EXPANDROOT=false ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
29 29 RELEASE=stretch BUILD_KERNEL=true ./rpi23-gen-image.sh
30 30 RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
31 31 RELEASE=stretch RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
32 32 ```
33 33
34 34 ## Configuration template files
35 35 To avoid long lists of command-line parameters and to help to store the favourite parameter configurations the `rpi23-gen-image.sh` script supports so called configuration template files (`CONFIG_TEMPLATE`=template). These are simple text files located in the `./templates` directory that contain the list of configuration parameters that will be used. New configuration template files can be added to the `./templates` directory.
36 36
37 37 ##### Command-line examples:
38 38 ```shell
39 39 CONFIG_TEMPLATE=rpi3stretch ./rpi23-gen-image.sh
40 40 CONFIG_TEMPLATE=rpi2stretch ./rpi23-gen-image.sh
41 41 ```
42 42
43 43 ## Supported parameters and settings
44 44 #### APT settings:
45 45 ##### `APT_SERVER`="ftp.debian.org"
46 46 Set Debian packages server address. Choose a server from the list of Debian worldwide [mirror sites](https://www.debian.org/mirror/list). Using a nearby server will probably speed-up all required downloads within the bootstrapping process.
47 47
48 48 ##### `APT_PROXY`=""
49 49 Set Proxy server address. Using a local Proxy-Cache like `apt-cacher-ng` will speed-up the bootstrapping process because all required Debian packages will only be downloaded from the Debian mirror site once. If `apt-cacher-ng` is running on default `http://127.0.0.1:3142` it is autodetected and you don't need to set this.
50 50
51 51 ##### `APT_INCLUDES`=""
52 52 A comma separated list of additional packages to be installed by debootstrap during bootstrapping.
53 53
54 54 ##### `APT_INCLUDES_LATE`=""
55 55 A comma separated list of additional packages to be installed by apt after bootstrapping and after APT sources are set up. This is useful for packages with pre-depends, which debootstrap do not handle well.
56 56
57 57 ---
58 58
59 59 #### General system settings:
60 60 ##### `SET_ARCH`=32
61 61 Set Architecture to default 32bit. If you want to to compile 64bit (RPI3 or RPI3+) set it to `64`. This option will set every needed crosscompiler or boeard specific option for a successful build.
62 62 If you want to change e.g. cross-compiler -> Templates always override defaults
63 63
64 64 ##### `RPI_MODEL`=2
65 65 Specifiy the target Raspberry Pi hardware model. The script at this time supports the following Raspberry Pi models:
66 66 `0` = Used for Raspberry Pi 0 and Raspberry Pi 0 W
67 67 `1` = Used for Pi 1 model A and B
68 68 `1P` = Used for Pi 1 model B+ and A+
69 69 `2` = Used for Pi 2 model B
70 70 `3` = Used for Pi 3 model B
71 71 `3P` = Used for Pi 3 model B+
72 72 `BUILD_KERNEL`=true will automatically be set if the Raspberry Pi model `3` or `3P` is used.
73 73
74 74 ##### `RELEASE`="buster"
75 75 Set the desired Debian release name. The script at this time supports the bootstrapping of the Debian releases `stretch` and `buster`.
76 76
77 77 ##### `RELEASE_ARCH`="armhf"
78 78 Set the desired Debian release architecture.
79 79
80 80 ##### `HOSTNAME`="rpi$RPI_MODEL-$RELEASE"
81 81 Set system host name. It's recommended that the host name is unique in the corresponding subnet.
82 82
83 83 ##### `PASSWORD`="raspberry"
84 84 Set system `root` password. It's **STRONGLY** recommended that you choose a custom password.
85 85
86 86 ##### `USER_PASSWORD`="raspberry"
87 87 Set password for the created non-root user `USER_NAME`=pi. Ignored if `ENABLE_USER`=false. It's **STRONGLY** recommended that you choose a custom password.
88 88
89 89 ##### `DEFLOCAL`="en_US.UTF-8"
90 90 Set default system locale. This setting can also be changed inside the running OS using the `dpkg-reconfigure locales` command. Please note that on using this parameter the script will automatically install the required packages `locales`, `keyboard-configuration` and `console-setup`.
91 91
92 92 ##### `TIMEZONE`="Europe/Berlin"
93 93 Set default system timezone. All available timezones can be found in the `/usr/share/zoneinfo/` directory. This setting can also be changed inside the running OS using the `dpkg-reconfigure tzdata` command.
94 94
95 95 ##### `EXPANDROOT`=true
96 96 Expand the root partition and filesystem automatically on first boot.
97 97
98 98 ##### `ENABLE_QEMU`=false
99 99 Generate kernel (`vexpress_defconfig`), file system image (`qcow2`) and DTB files that can be used for QEMU full system emulation (`vexpress-A15`). The output files are stored in the `$(pwd)/images/qemu` directory. You can find more information about running the generated image in the QEMU section of this readme file.
100 100
101 101 ---
102 102
103 103 #### Keyboard settings:
104 104 These options are used to configure keyboard layout in `/etc/default/keyboard` for console and Xorg. These settings can also be changed inside the running OS using the `dpkg-reconfigure keyboard-configuration` command.
105 105
106 106 ##### `XKB_MODEL`=""
107 107 Set the name of the model of your keyboard type.
108 108
109 109 ##### `XKB_LAYOUT`=""
110 110 Set the supported keyboard layout(s).
111 111
112 112 ##### `XKB_VARIANT`=""
113 113 Set the supported variant(s) of the keyboard layout(s).
114 114
115 115 ##### `XKB_OPTIONS`=""
116 116 Set extra xkb configuration options.
117 117
118 118 ---
119 119
120 120 #### Networking settings (DHCP):
121 121 This parameter is used to set up networking auto configuration in `/etc/systemd/network/eth.network`. The default location of network configuration files in the Debian `stretch` release was changed to `/lib/systemd/network`.`
122 122
123 123 ##### `ENABLE_DHCP`=true
124 124 Set the system to use DHCP. This requires an DHCP server.
125 125
126 126 ---
127 127
128 128 #### Networking settings (static):
129 129 These parameters are used to set up a static networking configuration in `/etc/systemd/network/eth.network`. The following static networking parameters are only supported if `ENABLE_DHCP` was set to `false`. The default location of network configuration files in the Debian `stretch` release was changed to `/lib/systemd/network`.
130 130
131 131 ##### `NET_ADDRESS`=""
132 132 Set a static IPv4 or IPv6 address and its prefix, separated by "/", eg. "192.169.0.3/24".
133 133
134 134 ##### `NET_GATEWAY`=""
135 135 Set the IP address for the default gateway.
136 136
137 137 ##### `NET_DNS_1`=""
138 138 Set the IP address for the first DNS server.
139 139
140 140 ##### `NET_DNS_2`=""
141 141 Set the IP address for the second DNS server.
142 142
143 143 ##### `NET_DNS_DOMAINS`=""
144 144 Set the default DNS search domains to use for non fully qualified host names.
145 145
146 146 ##### `NET_NTP_1`=""
147 147 Set the IP address for the first NTP server.
148 148
149 149 ##### `NET_NTP_2`=""
150 150 Set the IP address for the second NTP server.
151 151
152 152 ---
153 153
154 154 #### Basic system features:
155 155 ##### `ENABLE_CONSOLE`=true
156 156 Enable serial console interface. Recommended if no monitor or keyboard is connected to the RPi2/3. In case of problems fe. if the network (auto) configuration failed - the serial console can be used to access the system.
157 157
158 158 ##### `ENABLE_I2C`=false
159 159 Enable I2C interface on the RPi2/3. Please check the [RPi2/3 pinout diagrams](https://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins.
160 160
161 161 ##### `ENABLE_SPI`=false
162 162 Enable SPI interface on the RPi2/3. Please check the [RPi2/3 pinout diagrams](https://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins.
163 163
164 164 ##### `ENABLE_IPV6`=true
165 165 Enable IPv6 support. The network interface configuration is managed via systemd-networkd.
166 166
167 167 ##### `ENABLE_SSHD`=true
168 168 Install and enable OpenSSH service. The default configuration of the service doesn't allow `root` to login. Please use the user `pi` instead and `su -` or `sudo` to execute commands as root.
169 169
170 170 ##### `ENABLE_NONFREE`=false
171 171 Allow the installation of non-free Debian packages that do not comply with the DFSG. This is required to install closed-source firmware binary blobs.
172 172
173 173 ##### `ENABLE_WIRELESS`=false
174 174 Download and install the [closed-source firmware binary blob](https://github.com/RPi-Distro/firmware-nonfree/raw/master/brcm) that is required to run the internal wireless interface of the Raspberry Pi model `3`. This parameter is ignored if the specified `RPI_MODEL` is not `3`.
175 175
176 176 ##### `ENABLE_RSYSLOG`=true
177 177 If set to false, disable and uninstall rsyslog (so logs will be available only
178 178 in journal files)
179 179
180 180 ##### `ENABLE_SOUND`=true
181 181 Enable sound hardware and install Advanced Linux Sound Architecture.
182 182
183 183 ##### `ENABLE_HWRANDOM`=true
184 184 Enable Hardware Random Number Generator. Strong random numbers are important for most network based communications that use encryption. It's recommended to be enabled.
185 185
186 186 ##### `ENABLE_MINGPU`=false
187 187 Minimize the amount of shared memory reserved for the GPU. It doesn't seem to be possible to fully disable the GPU.
188 188
189 189 ##### `ENABLE_DBUS`=true
190 190 Install and enable D-Bus message bus. Please note that systemd should work without D-bus but it's recommended to be enabled.
191 191
192 192 ##### `ENABLE_XORG`=false
193 193 Install Xorg open-source X Window System.
194 194
195 195 ##### `ENABLE_WM`=""
196 196 Install a user defined window manager for the X Window System. To make sure all X related package dependencies are getting installed `ENABLE_XORG` will automatically get enabled if `ENABLE_WM` is used. The `rpi23-gen-image.sh` script has been tested with the following list of window managers: `blackbox`, `openbox`, `fluxbox`, `jwm`, `dwm`, `xfce4`, `awesome`.
197 197
198 198 ##### `ENABLE_SYSVINIT`=false
199 199 Support for halt,init,poweroff,reboot,runlevel,shutdown,telinit commands
200 200
201 201 ---
202 202
203 203 #### Advanced system features:
204 204 ##### `ENABLE_MINBASE`=false
205 205 Use debootstrap script variant `minbase` which only includes essential packages and apt. This will reduce the disk usage by about 65 MB.
206 206
207 207 ##### `ENABLE_REDUCE`=false
208 208 Reduce the disk space usage by deleting packages and files. See `REDUCE_*` parameters for detailed information.
209 209
210 210 ##### `ENABLE_UBOOT`=false
211 211 Replace the default RPi2/3 second stage bootloader (bootcode.bin) with [U-Boot bootloader](https://git.denx.de/?p=u-boot.git;a=summary). U-Boot can boot images via the network using the BOOTP/TFTP protocol.
212 212
213 213 ##### `UBOOTSRC_DIR`=""
214 214 Path to a directory (`u-boot`) of [U-Boot bootloader sources](https://git.denx.de/?p=u-boot.git;a=summary) that will be copied, configured, build and installed inside the chroot.
215 215
216 216 ##### `ENABLE_FBTURBO`=false
217 217 Install and enable the [hardware accelerated Xorg video driver](https://github.com/ssvb/xf86-video-fbturbo) `fbturbo`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling.
218 218
219 219 ##### `FBTURBOSRC_DIR`=""
220 220 Path to a directory (`xf86-video-fbturbo`) of [hardware accelerated Xorg video driver sources](https://github.com/ssvb/xf86-video-fbturbo) that will be copied, configured, build and installed inside the chroot.
221 221
222 222 ##### `ENABLE_VIDEOCORE`=false
223 223 Install and enable the [Source code for ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) `vcgencmd`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling.
224 224
225 225 ##### `VIDEOCORESRC_DIR`=""
226 226 Path to a directory (`userland`) of [Source code for ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) that will be copied, configured, build and installed inside the chroot.
227 227
228 228 ##### `ENABLE_IPTABLES`=false
229 229 Enable iptables IPv4/IPv6 firewall. Simplified ruleset: Allow all outgoing connections. Block all incoming connections except to OpenSSH service.
230 230
231 231 ##### `ENABLE_USER`=true
232 232 Create non-root user with password `USER_PASSWORD`=raspberry. Unless overridden with `USER_NAME`=user, username will be `pi`.
233 233
234 234 ##### `USER_NAME`=pi
235 235 Non-root user to create. Ignored if `ENABLE_USER`=false
236 236
237 237 ##### `ENABLE_ROOT`=false
238 238 Set root user password so root login will be enabled
239 239
240 240 ##### `ENABLE_HARDNET`=false
241 241 Enable IPv4/IPv6 network stack hardening settings.
242 242
243 243 ##### `ENABLE_SPLITFS`=false
244 244 Enable having root partition on an USB drive by creating two image files: one for the `/boot/firmware` mount point, and another for `/`.
245 245
246 246 ##### `CHROOT_SCRIPTS`=""
247 247 Path to a directory with scripts that should be run in the chroot before the image is finally built. Every executable file in this directory is run in lexicographical order.
248 248
249 249 ##### `ENABLE_INITRAMFS`=false
250 250 Create an initramfs that that will be loaded during the Linux startup process. `ENABLE_INITRAMFS` will automatically get enabled if `ENABLE_CRYPTFS`=true. This parameter will be ignored if `BUILD_KERNEL`=false.
251 251
252 252 ##### `ENABLE_IFNAMES`=true
253 253 Enable automatic assignment of predictable, stable network interface names for all local Ethernet, WLAN interfaces. This might create complex and long interface names.
254 254
255 255 ##### `DISABLE_UNDERVOLT_WARNINGS`=
256 256 Disable RPi2/3 under-voltage warnings and overlays. Setting the parameter to `1` will disable the warning overlay. Setting it to `2` will additionally allow RPi2/3 turbo mode when low-voltage is present.
257 257
258 258 ---
259 259
260 260 #### SSH settings:
261 261 ##### `SSH_ENABLE_ROOT`=false
262 262 Enable password root login via SSH. This may be a security risk with default password, use only in trusted environments. `ENABLE_ROOT` must be set to `true`.
263 263
264 264 ##### `SSH_DISABLE_PASSWORD_AUTH`=false
265 265 Disable password based SSH authentication. Only public key based SSH (v2) authentication will be supported.
266 266
267 267 ##### `SSH_LIMIT_USERS`=false
268 268 Limit the users that are allowed to login via SSH. Only allow user `USER_NAME`=pi and root if `SSH_ENABLE_ROOT`=true to login. This parameter will be ignored if `dropbear` SSH is used (`REDUCE_SSHD`=true).
269 269
270 270 ##### `SSH_ROOT_PUB_KEY`=""
271 271 Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `root`. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported. `ENABLE_ROOT` **and** `SSH_ENABLE_ROOT` must be set to `true`.
272 272
273 273 ##### `SSH_USER_PUB_KEY`=""
274 274 Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `USER_NAME`=pi. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported.
275 275
276 276 ---
277 277
278 278 #### Kernel compilation:
279 279 ##### `BUILD_KERNEL`=true
280 280 Build and install the latest RPi2/3 Linux kernel. Currently only the default RPi2/3 kernel configuration is used.
281 281
282 282 ##### `CROSS_COMPILE`="arm-linux-gnueabihf-"
283 283 This sets the cross compile enviornment for the compiler.
284 284
285 285 ##### `KERNEL_ARCH`="arm"
286 286 This sets the kernel architecture for the compiler.
287 287
288 288 ##### `KERNEL_IMAGE`="kernel7.img"
289 289 Name of the image file in the boot partition. If not set, `KERNEL_IMAGE` will be set to "kernel8.img" automatically if building for arm64.
290 290
291 291 ##### `KERNEL_BRANCH`=""
292 292 Name of the requested branch from the GIT location for the RPi Kernel. Default is using the current default branch from the GIT site.
293 293
294 294 ##### `QEMU_BINARY`="/usr/bin/qemu-arm-static"
295 295 Sets the QEMU enviornment for the Debian archive. If not set, `QEMU_BINARY` will be set to "/usr/bin/qemu-aarch64-static" automatically if building for arm64.
296 296
297 297 ##### `KERNEL_DEFCONFIG`="bcm2709_defconfig"
298 298 Sets the default config for kernel compiling. If not set, `KERNEL_DEFCONFIG` will be set to "bcmrpi3\_defconfig" automatically if building for arm64.
299 299
300 300 ##### `KERNEL_REDUCE`=false
301 301 Reduce the size of the generated kernel by removing unwanted device, network and filesystem drivers (experimental).
302 302
303 303 ##### `KERNEL_THREADS`=1
304 304 Number of parallel kernel building threads. If the parameter is left untouched the script will automatically determine the number of CPU cores to set the number of parallel threads to speed the kernel compilation.
305 305
306 306 ##### `KERNEL_HEADERS`=true
307 307 Install kernel headers with built kernel.
308 308
309 309 ##### `KERNEL_MENUCONFIG`=false
310 310 Start `make menuconfig` interactive menu-driven kernel configuration. The script will continue after `make menuconfig` was terminated.
311 311
312 312 ##### `KERNEL_OLDDEFCONFIG`=false
313 313 Run `make olddefconfig` to automatically set all new kernel configuration options to their recommended default values.
314 314
315 315 ##### `KERNEL_CCACHE`=false
316 316 Compile the kernel using ccache. This speeds up kernel recompilation by caching previous compilations and detecting when the same compilation is being done again.
317 317
318 318 ##### `KERNEL_REMOVESRC`=true
319 319 Remove all kernel sources from the generated OS image after it was built and installed.
320 320
321 321 ##### `KERNELSRC_DIR`=""
322 322 Path to a directory (`linux`) of [RaspberryPi Linux kernel sources](https://github.com/raspberrypi/linux) that will be copied, configured, build and installed inside the chroot.
323 323
324 324 ##### `KERNELSRC_CLEAN`=false
325 325 Clean the existing kernel sources directory `KERNELSRC_DIR` (using `make mrproper`) after it was copied to the chroot and before the compilation of the kernel has started. This parameter will be ignored if no `KERNELSRC_DIR` was specified or if `KERNELSRC_PREBUILT`=true.
326 326
327 327 ##### `KERNELSRC_CONFIG`=true
328 328 Run `make bcm2709_defconfig` (and optional `make menuconfig`) to configure the kernel sources before building. This parameter is automatically set to `true` if no existing kernel sources directory was specified using `KERNELSRC_DIR`. This parameter is ignored if `KERNELSRC_PREBUILT`=true.
329 329
330 330 ##### `KERNELSRC_USRCONFIG`=""
331 331 Copy own config file to kernel `.config`. If `KERNEL_MENUCONFIG`=true then running after copy.
332 332
333 333 ##### `KERNELSRC_PREBUILT`=false
334 334 With this parameter set to true the script expects the existing kernel sources directory to be already successfully cross-compiled. The parameters `KERNELSRC_CLEAN`, `KERNELSRC_CONFIG`, `KERNELSRC_USRCONFIG` and `KERNEL_MENUCONFIG` are ignored and no kernel compilation tasks are performed.
335 335
336 336 ##### `RPI_FIRMWARE_DIR`=""
337 337 The directory (`firmware`) containing a local copy of the firmware from the [RaspberryPi firmware project](https://github.com/raspberrypi/firmware). Default is to download the latest firmware directly from the project.
338 338
339 339 ---
340 340
341 341 #### Reduce disk usage:
342 342 The following list of parameters is ignored if `ENABLE_REDUCE`=false.
343 343
344 344 ##### `REDUCE_APT`=true
345 345 Configure APT to use compressed package repository lists and no package caching files.
346 346
347 347 ##### `REDUCE_DOC`=true
348 348 Remove all doc files (harsh). Configure APT to not include doc files on future `apt-get` package installations.
349 349
350 350 ##### `REDUCE_MAN`=true
351 351 Remove all man pages and info files (harsh). Configure APT to not include man pages on future `apt-get` package installations.
352 352
353 353 ##### `REDUCE_VIM`=false
354 354 Replace `vim-tiny` package by `levee` a tiny vim clone.
355 355
356 356 ##### `REDUCE_BASH`=false
357 357 Remove `bash` package and switch to `dash` shell (experimental).
358 358
359 359 ##### `REDUCE_HWDB`=true
360 360 Remove PCI related hwdb files (experimental).
361 361
362 362 ##### `REDUCE_SSHD`=true
363 363 Replace `openssh-server` with `dropbear`.
364 364
365 365 ##### `REDUCE_LOCALE`=true
366 366 Remove all `locale` translation files.
367 367
368 368 ---
369 369
370 370 #### Encrypted root partition:
371 371 ##### `ENABLE_CRYPTFS`=false
372 372 Enable full system encryption with dm-crypt. Setup a fully LUKS encrypted root partition (aes-xts-plain64:sha512) and generate required initramfs. The /boot directory will not be encrypted. This parameter will be ignored if `BUILD_KERNEL`=false. `ENABLE_CRYPTFS` is experimental. SSH-to-initramfs is currently not supported but will be soon - feel free to help.
373 373
374 374 ##### `CRYPTFS_PASSWORD`=""
375 375 Set password of the encrypted root partition. This parameter is mandatory if `ENABLE_CRYPTFS`=true.
376 376
377 377 ##### `CRYPTFS_MAPPING`="secure"
378 378 Set name of dm-crypt managed device-mapper mapping.
379 379
380 380 ##### `CRYPTFS_CIPHER`="aes-xts-plain64:sha512"
381 381 Set cipher specification string. `aes-xts*` ciphers are strongly recommended.
382 382
383 383 ##### `CRYPTFS_XTSKEYSIZE`=512
384 384 Sets key size in bits. The argument has to be a multiple of 8.
385 385
386 386 ---
387 387
388 388 #### Build settings:
389 389 ##### `BASEDIR`=$(pwd)/images/${RELEASE}
390 390 Set a path to a working directory used by the script to generate an image.
391 391
392 392 ##### `IMAGE_NAME`=${BASEDIR}/${DATE}-${KERNEL_ARCH}-${KERNEL_BRANCH}-rpi${RPI_MODEL}-${RELEASE}-${RELEASE_ARCH}
393 393 Set a filename for the output file(s). Note: the script will create $IMAGE_NAME.img if `ENABLE_SPLITFS`=false or $IMAGE_NAME-frmw.img and $IMAGE_NAME-root.img if `ENABLE_SPLITFS`=true. Note 2: If the KERNEL_BRANCH is not set, the word "CURRENT" is used.
394 394
395 395 ## Understanding the script
396 396 The functions of this script that are required for the different stages of the bootstrapping are split up into single files located inside the `bootstrap.d` directory. During the bootstrapping every script in this directory gets executed in lexicographical order:
397 397
398 398 | Script | Description |
399 399 | --- | --- |
400 400 | `10-bootstrap.sh` | Debootstrap basic system |
401 401 | `11-apt.sh` | Setup APT repositories |
402 402 | `12-locale.sh` | Setup Locales and keyboard settings |
403 403 | `13-kernel.sh` | Build and install RPi2/3 Kernel |
404 404 | `14-fstab.sh` | Setup fstab and initramfs |
405 405 | `15-rpi-config.sh` | Setup RPi2/3 config and cmdline |
406 406 | `20-networking.sh` | Setup Networking |
407 407 | `21-firewall.sh` | Setup Firewall |
408 408 | `30-security.sh` | Setup Users and Security settings |
409 409 | `31-logging.sh` | Setup Logging |
410 410 | `32-sshd.sh` | Setup SSH and public keys |
411 411 | `41-uboot.sh` | Build and Setup U-Boot |
412 412 | `42-fbturbo.sh` | Build and Setup fbturbo Xorg driver |
413 413 | `50-firstboot.sh` | First boot actions |
414 414 | `99-reduce.sh` | Reduce the disk space usage |
415 415
416 416 All the required configuration files that will be copied to the generated OS image are located inside the `files` directory. It is not recommended to modify these configuration files manually.
417 417
418 418 | Directory | Description |
419 419 | --- | --- |
420 420 | `apt` | APT management configuration files |
421 421 | `boot` | Boot and RPi2/3 configuration files |
422 422 | `dpkg` | Package Manager configuration |
423 423 | `etc` | Configuration files and rc scripts |
424 424 | `firstboot` | Scripts that get executed on first boot |
425 425 | `initramfs` | Initramfs scripts |
426 426 | `iptables` | Firewall configuration files |
427 427 | `locales` | Locales configuration |
428 428 | `modules` | Kernel Modules configuration |
429 429 | `mount` | Fstab configuration |
430 430 | `network` | Networking configuration files |
431 431 | `sysctl.d` | Swapping and Network Hardening configuration |
432 432 | `xorg` | fbturbo Xorg driver configuration |
433 433
434 434 ## Custom packages and scripts
435 435 Debian custom packages, i.e. those not in the debian repositories, can be installed by placing them in the `packages` directory. They are installed immediately after packages from the repositories are installed. Any dependencies listed in the custom packages will be downloaded automatically from the repositories. Do not list these custom packages in `APT_INCLUDES`.
436 436
437 437 Scripts in the custom.d directory will be executed after all other installation is complete but before the image is created.
438 438
439 439 ## Logging of the bootstrapping process
440 440 All information related to the bootstrapping process and the commands executed by the `rpi23-gen-image.sh` script can easily be saved into a logfile. The common shell command `script` can be used for this purpose:
441 441
442 442 ```shell
443 443 script -c 'APT_SERVER=ftp.de.debian.org ./rpi23-gen-image.sh' ./build.log
444 444 ```
445 445
446 446 ## Flashing the image file
447 447 After the image file was successfully created by the `rpi23-gen-image.sh` script it can be copied to the microSD card that will be used by the RPi2/3 computer. This can be performed by using the tools `bmaptool` or `dd`. Using `bmaptool` will probably speed-up the copy process because `bmaptool` copies more wisely than `dd`.
448 448
449 449 ##### Flashing examples:
450 450 ```shell
451 451 bmaptool copy ./images/buster/2017-01-23-rpi3-buster.img /dev/mmcblk0
452 452 dd bs=4M if=./images/buster/2017-01-23-rpi3-buster.img of=/dev/mmcblk0
453 453 ```
454 454 If you have set `ENABLE_SPLITFS`, copy the `-frmw` image on the microSD card, then the `-root` one on the USB drive:
455 455 ```shell
456 456 bmaptool copy ./images/buster/2017-01-23-rpi3-buster-frmw.img /dev/mmcblk0
457 457 bmaptool copy ./images/buster/2017-01-23-rpi3-buster-root.img /dev/sdc
458 458 ```
459 459
460 460 ## QEMU emulation
461 461 Start QEMU full system emulation:
462 462 ```shell
463 463 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=tty1"
464 464 ```
465 465
466 466 Start QEMU full system emulation and output to console:
467 467 ```shell
468 468 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
469 469 ```
470 470
471 471 Start QEMU full system emulation with SMP and output to console:
472 472 ```shell
473 473 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -smp cpus=2,maxcpus=2 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
474 474 ```
475 475
476 476 Start QEMU full system emulation with cryptfs, initramfs and output to console:
477 477 ```shell
478 478 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -initrd "initramfs-${KERNEL_VERSION}" -append "root=/dev/mapper/secure cryptdevice=/dev/mmcblk0p2:secure rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
479 479 ```
480 480
481 481 ## External links and references
482 482 * [Debian worldwide mirror sites](https://www.debian.org/mirror/list)
483 483 * [Debian Raspberry Pi 2 Wiki](https://wiki.debian.org/RaspberryPi2)
484 484 * [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains)
485 485 * [Official Raspberry Pi Firmware on github](https://github.com/raspberrypi/firmware)
486 486 * [Official Raspberry Pi Kernel on github](https://github.com/raspberrypi/linux)
487 487 * [U-BOOT git repository](https://git.denx.de/?p=u-boot.git;a=summary)
488 488 * [Xorg DDX driver fbturbo](https://github.com/ssvb/xf86-video-fbturbo)
489 489 * [RPi3 Wireless interface firmware](https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm80211/brcm)
490 490 * [Collabora RPi2 Kernel precompiled](https://repositories.collabora.co.uk/debian/)
@@ -1,15 +1,15
1 1 # Configuration template file used by rpi23-gen-image.sh
2 2 # Debian Stretch using the Arm64 for kernel compilation and Debian distribution.
3 3
4 4 RPI_MODEL=3
5 5 RELEASE=stretch
6 6 BUILD_KERNEL=true
7 7 KERNEL_ARCH=arm64
8 8 RELEASE_ARCH=arm64
9 9 CROSS_COMPILE=aarch64-linux-gnu-
10 10 QEMU_BINARY=/usr/bin/qemu-aarch64-static
11 11 KERNEL_DEFCONFIG=bcmrpi3_defconfig
12 12 KERNEL_BIN_IMAGE=Image
13 13 KERNEL_IMAGE=kernel8.img
14 KERNEL_BRANCH=rpi-4.11.y
14 KERNEL_BRANCH=rpi-4.14.y
15 15 ENABLE_WIRELESS=true
General Comments 0
Vous devez vous connecter pour laisser un commentaire. Se connecter maintenant