##// END OF EJS Templates
Raspi2-3_GenImage
RSS

Cloner depuis https://github.com/drtyhlpr/rpi23-gen-image.git

Merge branch 'rpifegen' of http://depot.tremplin.ens-lyon.fr/Raspi2-3_GenImage into rpifegen
vidal -
r752:8bc725a78d71 Fusion
parent child
Show More
Show file before | Show file after | Hide comments
1 NO CONTENT: new file 100644, binary diff hidden
NO CONTENT: new file 100644, binary diff hidden
Show file before | Show file after | Hide comments
@@ -0,0 +1,22
1 ## Templates used at IFÉ ENS de Lyon for "Tremplin des sciences" project
2
3 These templates have been used to create Raspberry Pi images for the
4 project "Climate and meteorolgy springboard for teaching sciences".
5 These images are tuned andused as explained in the
6 [blog](http://blog.climatetmeteo.fr/GerardVidal/) (mostly in french
7 but under translation).
8
9 The aim is to share with teachers a Raspberry Pi3 binary image providing software resources to use commercial weatherstations or DIY weathersystems made with various sensors. The following images have been built :
10
11 * raspife2-stretch Debian stretch image for raspi 2
12 * raspife3-jessie Debian jessie image for raspi 3
13 * raspife3-stretch Debian stretch image for raspi 3
14 * raspife3W-stretch Debian stretch image for raspi 3 with single IPAddress and weewx service
15 * raspife3-buster Debian buster image for raspi 3
16
17 In these images language ichoosen is french and can easily be changed.
18 Pathes and other variables are the ones that have been used during
19 execution and personnal data are replaced by "*******", change the
20 values according to your needs.
21
22
Show file before | Show file after | Hide comments
@@ -0,0 +1,80
1 Configuration file raspife2 Stretch IFÉ 2017/02/24
2 #
3 APT_SERVER=ftp.fr.debian.org
4 APT_INCLUDES="gnupg,gnupg2,firmware-realtek,firmware-linux-nonfree,firmware-linux,tightvncserver,build-essentia$
5 bison,libboost-all-dev,automake,autoconf,autogen,libtool,pkg-config,checkinstall,python3,python3-dev,menulibre,$
6 libnotify-bin,python,python-configobj,python-cheetah,python-imaging,python-serial,python-usb,python-dev,\
7 pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,jed,i2c-tools,python-smbus,policykit-1,usbutils,\
8 pmount,python-pip,python3-pip,geany,geany-plugin-py,geany-plugin-markdown,firefox-esr,firefox-esr-l10n-fr,\
9 icedtea-8-plugin,openjdk-8-jdk,openjdk-8-jre,openjdk-8-jre-headless,libqtwebkit-dev,libqt5webkit5-dev,\
10 libudev-dev,libzzip-dev,zlib1g-dev,libcanberra-gtk-module,libnss-myhostname,libfreetype6-dev,libpng16-16,\
11 lxsession,openbox-lxde-session,lxde"
12 #----------------------
13 RPI_MODEL=2
14 RELEASE="stretch"
15 HOSTNAME="raspife2"
16 PASSWORD="***********"
17 USER_PASSWORD="**************"
18 DEFLOCAL="fr_FR.UTF-8"
19 TIMEZONE="Europe/Paris"
20 EXPANDROOT=false
21 #-----------------------
22 XKB_MODEL="pc105"
23 XKB_LAYOUT="fr"
24 XKB_VARIANT="latin9"
25 XKB_OPTIONS=""
26 #------------------------
27 ENABLE_DHCP=true
28 #------------------------
29 ENABLE_CONSOLE=true
30 ENABLE_I2C=true
31 ENABLE_SPI=true
32 ENABLE_IPV6=true
33 ENABLE_SSHD=true
34 ENABLE_NONFREE=true
35 ENABLE_WIRELESS=false
36 ENABLE_RSYSLOG=true
37 ENABLE_SOUND=true
38 ENABLE_HWRANDOM=true
39 ENABLE_MINGPU=true
40 ENABLE_DBUS=true
41 ENABLE_XORG=true
42 ENABLE_WM="lxdm"
43 #------------------------
44 ENABLE_MINBASE=false
45 ENABLE_REDUCE=false
46 ENABLE_UBOOT=false
47 ENABLE_FBTURBO=true
48 ENABLE_IPTABLES=false
49 ENABLE_USER=true
50 USER_NAME=ens-ife
51 ENABLE_ROOT=true
52 ENABLE_HARDNET=true
53 ENABLE_INITRAMFS=true
54 ENABLE_IFNAMES=true
55 #------------------------
56 ENABLE_ROOT_SSH=false
57 SSH_LIMIT_USERS=false
58 SSH_ROOT_PUB_KEY="/home/********/.ssh/authorized_keys"
59 SSH_USER_PUB_KEY="/home/********/.ssh/authorized_keys"
60 #------------------------
61 BUILD_KERNEL=true
62 KERNEL_REDUCE=false
63 KERNEL_HEADERS=true
64 KERNEL_REMOVESRC=true
65 KERNELSRC_CLEAN=true
66 KERNELSRC_CONFIG=true
67 #------------------------
68 REDUCE_APT=false
69 REDUCE_DOC=true
70 REDUCE_MAN=false
71 REDUCE_HWDB=true
72 REDUCE_BASH=false
73 REDUCE_SSHD=false
74 REDUCE_LOCALE=false
75 #-------------------------
76 ENABLE_CRYPTFS=false
77 #-------------------------
78 BASEDIR=/media/********/images/${RELEASE}
79 DATE=date
80 +%Y-%m-%d IMAGE_NAME=${BASEDIR}/${DATE}-rpi${RPI_MODEL}-${RELEASE}
Show file before | Show file after | Hide comments
@@ -0,0 +1,98
1 # Configuration file raspi3 Buster IFÉ 2017/11/01
2 #
3 APT_SERVER=debian.mirrors.ovh.net
4 APT_INCLUDES=""
5 APT_INCLUDES_LATE="gnupg,firmware-linux-nonfree,firmware-linux,dh-autoreconf,\
6 gettext,build-essential,git,cmake,libjson-c-dev,unzip,usbutils,\
7 bison,libboost-all-dev,automake,autoconf,autogen,libtool,libtool-bin,\
8 pkg-config,checkinstall,menulibre,libnotify-bin,pandoc,\
9 python3,python3-dev,python3-pypandoc,python3-scipy,python3-tk,python3-pandocfilters,\
10 python3-geopy,python3-pip,\
11 python,python-dev,python-pypandoc,python-scipy,python-tk,python-pandocfilters,\
12 python-geopy,python-pip,python-tk,pandoc,\
13 python-configobj,python-cheetah,python-imaging,python-serial,python-usb,\
14 pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,i2c-tools,python-smbus,policykit-1,\
15 pmount,ntpdate,ntp,rsync,\
16 texlive,texlive-xetex,nginx-extras,ffmpeg,wicd,wicd-gtk,console-data,keyboard-configuration,\
17 libqtwebkit-dev,libqt5webkit5-dev,\
18 libudev-dev,libzzip-dev,zlib1g-dev,libcanberra-gtk-module,libnss-myhostname,libfreetype6-dev,libpng16-16,\
19 nmap,libltdl-dev,dbus-user-session,debian-archive-keyring,\
20 xutils-dev,lxsession,openbox-lxde-session,lxde,x11proto-randr-dev,lxrandr,\
21 tightvncserver,geany,geany-plugin-py,firefox-esr,firefox-esr-l10n-fr,jed,terminator,automake"
22 #ca-certificates-java,icedtea-plugin,icedtea-netx,\
23 #openjdk-8-jdk,openjdk-8-jre,openjdk-8-jre-headless,\
24 #openjdk-9-jdk,openjdk-9-jre,openjdk-9-jre-headless"
25 #----------------------
26 RPI_MODEL=3
27 RELEASE="buster"
28 RELEASE_ARCH="armhf"
29 HOSTNAME="raspife3"
30 PASSWORD="***********"
31 USER_PASSWORD="*************"
32 DEFLOCAL="fr_FR.UTF-8"
33 TIMEZONE="Europe/Paris"
34 EXPANDROOT=false
35 #-----------------------
36 XKB_MODEL="pc105"
37 XKB_LAYOUT="fr"
38 XKB_VARIANT="latin9"
39 XKB_OPTIONS=""
40 #------------------------
41 ENABLE_DHCP=true
42 #------------------------
43 ENABLE_CONSOLE=false
44 ENABLE_I2C=true
45 ENABLE_SPI=true
46 ENABLE_IPV6=true
47 ENABLE_SSHD=true
48 ENABLE_NONFREE=true
49 ENABLE_WIRELESS=true
50 ENABLE_RSYSLOG=true
51 ENABLE_SOUND=true
52 ENABLE_HWRANDOM=true
53 ENABLE_MINGPU=true
54 ENABLE_DBUS=true
55 ENABLE_XORG=true
56 ENABLE_WM="lxdm"
57 #------------------------
58 ENABLE_MINBASE=false
59 ENABLE_REDUCE=false
60 ENABLE_UBOOT=false
61 ENABLE_FBTURBO=true
62 ENABLE_IPTABLES=false
63 ENABLE_USER=true
64 USER_NAME=ens-ife
65 ENABLE_ROOT=true
66 ENABLE_HARDNET=true
67 ENABLE_INITRAMFS=true
68 ENABLE_IFNAMES=true
69 #------------------------
70 ENABLE_ROOT_SSH=false
71 SSH_LIMIT_USERS=false
72 SSH_ROOT_PUB_KEY="/home/*****/.ssh/authorized_keys"
73 SSH_USER_PUB_KEY="/home/*****/.ssh/authorized_keys"
74 #------------------------
75 BUILD_KERNEL=true
76 KERNEL_BRANCH=rpi-4.13.y
77 KERNEL_REDUCE=false
78 KERNEL_HEADERS=true
79 KERNEL_REMOVESRC=true
80 KERNELSRC_CLEAN=true
81 KERNELSRC_CONFIG=true
82 #------------------------
83 REDUCE_APT=false
84 REDUCE_DOC=true
85 REDUCE_MAN=false
86 REDUCE_HWDB=true
87 REDUCE_BASH=false
88 REDUCE_SSHD=false
89 REDUCE_LOCALE=false
90 #-------------------------
91 ENABLE_CRYPTFS=false
92 #-------------------------
93 BASEDIR=/data/RpiGenImage/Images/${RELEASE}
94 #BASEDIR=/media/*******/*********/Nano-Ordinateurs/RaspberryPi/RpiGenImage/Images/${RELEASE}
95 DATE=`date +%Y-%m-%d`
96 IMAGE_NAME=${BASEDIR}/${DATE}-rpi${RPI_MODEL}-${RELEASE}
97
98
Show file before | Show file after | Hide comments
@@ -0,0 +1,106
1 # Configuration file raspi3 Buster IFÉ 2017/11/01
2 #
3 APT_SERVER=debian.mirrors.ovh.net
4 APT_INCLUDES=""
5 APT_INCLUDES_LATE=""
6 APT_INCLUDES_LATE="gnupg,firmware-linux-nonfree,firmware-linux,dh-autoreconf,\
7 gettext,build-essential,git,cmake,libjson-c-dev,unzip,usbutils,\
8 bison,libboost-all-dev,automake,autoconf,autogen,libtool,libtool-bin,\
9 pkg-config,checkinstall,menulibre,libnotify-bin,pandoc,\
10 python3,python3-dev,python3-pypandoc,python3-scipy,python3-tk,python3-pandocfilters,\
11 python3-geopy,python3-pip,\
12 python,python-dev,python-pypandoc,python-scipy,python-tk,python-pandocfilters,\
13 python-geopy,python-pip,python-tk,pandoc,\
14 python-configobj,python-cheetah,python-imaging,python-serial,python-usb,\
15 pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,i2c-tools,python-smbus,policykit-1,\
16 pmount,ntpdate,ntp,rsync,\
17 texlive,texlive-xetex,nginx-extras,ffmpeg,wicd,wicd-gtk,console-data,keyboard-configuration,\
18 libqtwebkit-dev,libqt5webkit5-dev,\
19 libudev-dev,libzzip-dev,zlib1g-dev,libcanberra-gtk-module,libnss-myhostname,libfreetype6-dev,libpng16-16,\
20 nmap,libltdl-dev,dbus-user-session,debian-archive-keyring,\
21 xutils-dev,lxsession,openbox-lxde-session,lxde,x11proto-randr-dev,lxrandr,\
22 tightvncserver,geany,geany-plugin-py,firefox-esr,firefox-esr-l10n-fr,jed"
23 #ca-certificates-java,icedtea-plugin,icedtea-netx,\
24 #openjdk-8-jdk,openjdk-8-jre,openjdk-8-jre-headless,\
25 #openjdk-9-jdk,openjdk-9-jre,openjdk-9-jre-headless"
26 #----------------------
27 RPI_MODEL=3
28 RELEASE=buster
29 RELEASE_ARCH="armhf"
30 HOSTNAME="raspife3"
31 PASSWORD="AChanger1$"
32 USER_PASSWORD="AChanger1$"
33 DEFLOCAL="fr_FR.UTF-8"
34 TIMEZONE="Europe/Paris"
35 EXPANDROOT=false
36 #-----------------------
37 XKB_MODEL="pc105"
38 XKB_LAYOUT="fr"
39 XKB_VARIANT="latin9"
40 XKB_OPTIONS=""
41 #------------------------
42 ENABLE_DHCP=true
43 #------------------------
44 ENABLE_CONSOLE=false
45 ENABLE_I2C=true
46 ENABLE_SPI=true
47 ENABLE_IPV6=true
48 ENABLE_SSHD=true
49 ENABLE_NONFREE=true
50 ENABLE_WIRELESS=true
51 ENABLE_RSYSLOG=true
52 ENABLE_SOUND=true
53 ENABLE_HWRANDOM=true
54 ENABLE_MINGPU=true
55 ENABLE_DBUS=true
56 ENABLE_XORG=true
57 ENABLE_WM="lxdm"
58 #------------------------
59 ENABLE_MINBASE=false
60 ENABLE_REDUCE=false
61 ENABLE_UBOOT=false
62 ENABLE_FBTURBO=true
63 ENABLE_IPTABLES=false
64 ENABLE_USER=true
65 USER_NAME=ens-ife
66 ENABLE_ROOT=true
67 ENABLE_HARDNET=true
68 ENABLE_INITRAMFS=true
69 ENABLE_IFNAMES=true
70 #------------------------
71 ENABLE_ROOT_SSH=false
72 SSH_LIMIT_USERS=false
73 SSH_ROOT_PUB_KEY="/home/vidal/.ssh/authorized_keys"
74 SSH_USER_PUB_KEY="/home/vidal/.ssh/authorized_keys"
75 #------------------------
76 BUILD_KERNEL=true
77 KERNEL_ARCH=arm64
78 RELEASE_ARCH=arm64
79 CROSS_COMPILE=aarch64-linux-gnu-
80 QEMU_BINARY=/usr/bin/qemu-aarch64-static
81 KERNEL_DEFCONFIG=bcmrpi3_defconfig
82 KERNEL_BIN_IMAGE=Image
83 KERNEL_IMAGE="kernel10.img"
84 KERNEL_BRANCH=rpi-4.13.y
85 KERNEL_REDUCE=false
86 KERNEL_HEADERS=true
87 KERNEL_REMOVESRC=true
88 KERNELSRC_CLEAN=true
89 KERNELSRC_CONFIG=true
90 #------------------------
91 REDUCE_APT=false
92 REDUCE_DOC=true
93 REDUCE_MAN=false
94 REDUCE_HWDB=true
95 REDUCE_BASH=false
96 REDUCE_SSHD=false
97 REDUCE_LOCALE=false
98 #-------------------------
99 ENABLE_CRYPTFS=false
100 #-------------------------
101 BASEDIR=/data/RpiGenImage/Images/${RELEASE}
102 #BASEDIR=/media/vidal/ExternGV/Nano-Ordinateurs/RaspberryPi/RpiGenImage/Images/${RELEASE}
103 DATE=`date +%Y-%m-%d`
104 IMAGE_NAME=${BASEDIR}/${DATE}-rpi${RPI_MODEL}-${RELEASE}
105
106
Show file before | Show file after | Hide comments
@@ -0,0 +1,91
1 # Configuration file raspi3 Stretch IFÉ 2017/07/26
2 #
3 APT_SERVER=ftp.fr.debian.org
4 APT_INCLUDES="gnupg,gnupg2,firmware-linux-nonfree,firmware-linux,dh-autoreconf,\
5 gettext,build-essential,git,cmake,libjson-c-dev,unzip,usbutils,\
6 bison,libboost-all-dev,automake,autoconf,autogen,libtool,libtool-bin,\
7 pkg-config,checkinstall,menulibre,libnotify-bin,pandoc,\
8 python3,python3-dev,python3-pypandoc,python3-scipy,python3-tk,python3-pandocfilters,\
9 python,python-dev,python-pypandoc,python-scipy,python-tk,python-pandocfilters,\
10 python3-geopy,python3-pip,\
11 python-geopy,python-pip,\
12 python-configobj,python-cheetah,python-imaging,python-serial,python-usb,\
13 pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,jed,i2c-tools,python-smbus,policykit-1,\
14 pmount,ntpdate,\
15 texlive,texlive-xetex,nginx-extras,ffmpeg,wicd,wicd-gtk,console-data,keyboard-configuration,\
16 icedtea-8-plugin,openjdk-8-jdk,openjdk-8-jre,openjdk-8-jre-headless,libqtwebkit-dev,libqt5webkit5-dev,\
17 libudev-dev,libzzip-dev,zlib1g-dev,libcanberra-gtk-module,libnss-myhostname,libfreetype6-dev,libpng16-16,\
18 nmap,libltdl-dev,dbus-user-session,debian-archive-keyring,\
19 xutils-dev,lxsession,openbox-lxde-session,lxde,x11proto-randr-dev,lxrandr,\
20 tightvncserver,geany,geany-plugin-py,geany-plugin-markdown,firefox-esr,firefox-esr-l10n-fr"
21 #----------------------
22 RPI_MODEL=3
23 RELEASE="stretch"
24 HOSTNAME="raspife3"
25 PASSWORD="**************"
26 USER_PASSWORD="***************"
27 DEFLOCAL="fr_FR.UTF-8"
28 TIMEZONE="Europe/Paris"
29 EXPANDROOT=false
30 #-----------------------
31 XKB_MODEL="pc105"
32 XKB_LAYOUT="fr"
33 XKB_VARIANT="latin9"
34 XKB_OPTIONS=""
35 #------------------------
36 ENABLE_DHCP=true
37 #------------------------
38 ENABLE_CONSOLE=false
39 ENABLE_I2C=true
40 ENABLE_SPI=true
41 ENABLE_IPV6=true
42 ENABLE_SSHD=true
43 ENABLE_NONFREE=true
44 ENABLE_WIRELESS=true
45 ENABLE_RSYSLOG=true
46 ENABLE_SOUND=true
47 ENABLE_HWRANDOM=true
48 ENABLE_MINGPU=true
49 ENABLE_DBUS=true
50 ENABLE_XORG=true
51 ENABLE_WM="lxdm"
52 #------------------------
53 ENABLE_MINBASE=false
54 ENABLE_REDUCE=false
55 ENABLE_UBOOT=false
56 ENABLE_FBTURBO=true
57 ENABLE_IPTABLES=false
58 ENABLE_USER=true
59 USER_NAME=ens-ife
60 ENABLE_ROOT=true
61 ENABLE_HARDNET=true
62 ENABLE_INITRAMFS=true
63 ENABLE_IFNAMES=true
64 #------------------------
65 ENABLE_ROOT_SSH=false
66 SSH_LIMIT_USERS=false
67 SSH_ROOT_PUB_KEY="/home/*******/.ssh/authorized_keys"
68 SSH_USER_PUB_KEY="/home/*******/.ssh/authorized_keys"
69 #------------------------
70 BUILD_KERNEL=true
71 KERNEL_REDUCE=false
72 KERNEL_HEADERS=true
73 KERNEL_REMOVESRC=true
74 KERNELSRC_CLEAN=true
75 KERNELSRC_CONFIG=true
76 #------------------------
77 REDUCE_APT=false
78 REDUCE_DOC=true
79 REDUCE_MAN=false
80 REDUCE_HWDB=true
81 REDUCE_BASH=false
82 REDUCE_SSHD=false
83 REDUCE_LOCALE=false
84 #-------------------------
85 ENABLE_CRYPTFS=false
86 #-------------------------
87 BASEDIR=/data/RpiGenImage/Images/${RELEASE}
88 DATE=`date +%Y-%m-%d`
89 IMAGE_NAME=${BASEDIR}/${DATE}-rpi${RPI_MODEL}-${RELEASE}
90
91
Show file before | Show file after | Hide comments
@@ -0,0 +1,89
1 # Configuration file raspi3 Stretch Weewx IFÉ 2017/07/26
2 #
3 APT_SERVER=ftp.fr.debian.org
4 APT_INCLUDES="debian-archive-keyring,debian-keyring,automake,autoconf,autogen,gawk,gnupg,gnupg2,\
5 build-essential,git,cmake,libjson-c-dev,unzip,\
6 bison,libboost-all-dev,libtool,libtool-bin,pkg-config,checkinstall,libnotify-bin,pandoc,\
7 python3,python3-dev,python,python-dev,python-configobj,python-cheetah,python-mysqldb\
8 python-imaging,python-serial,python-usb,python-tk,python3-tk,python3-scipy,\
9 python-pypandoc,python3-pypandoc,python-pandocfilters,python3-pandocfilters,\
10 python-geopy,python3-geopy,python-pip,python3-pip,python-smbus,\
11 libudev-dev,libzzip-dev,zlib1g-dev,libnss-myhostname,libpng16-16,nmap,\
12 libltdl-dev,usbutils,pmount,ntpdate,texlive,texlive-xetex,nginx-extras,policykit-1,\
13 openjdk-8-jdk-headless,openjdk-8-jre-headless,\
14 pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,i2c-tools"
15 #----------------------
16 RPI_MODEL=3
17 RELEASE="stretch"
18 HOSTNAME="raspwife3"
19 PASSWORD="************"
20 USER_PASSWORD="************"
21 DEFLOCAL="fr_FR.UTF-8"
22 TIMEZONE="Europe/Paris"
23 EXPANDROOT=false
24 #-----------------------
25 XKB_MODEL="pc105"
26 XKB_LAYOUT="fr"
27 XKB_VARIANT="latin9"
28 XKB_OPTIONS=""
29 #------------------------
30 ENABLE_DHCP=false
31 NET_ADDRESS="192.168.***.***/24"
32 NET_GATEWAY="192.168.***.1"
33 NET_DNS_1="192.168.***.1"
34 NET_DNS_2="8.8.8.8"
35 #------------------------
36 ENABLE_CONSOLE=false
37 ENABLE_I2C=true
38 ENABLE_SPI=true
39 ENABLE_IPV6=true
40 ENABLE_SSHD=true
41 ENABLE_NONFREE=true
42 ENABLE_WIRELESS=true
43 ENABLE_RSYSLOG=true
44 ENABLE_SOUND=true
45 ENABLE_HWRANDOM=true
46 ENABLE_MINGPU=true
47 ENABLE_DBUS=true
48 ENABLE_XORG=false
49 ENABLE_WM=""
50 #------------------------
51 ENABLE_MINBASE=false
52 ENABLE_REDUCE=false
53 ENABLE_UBOOT=false
54 ENABLE_FBTURBO=false
55 ENABLE_IPTABLES=false
56 ENABLE_USER=true
57 USER_NAME=ens-ife
58 ENABLE_ROOT=true
59 ENABLE_HARDNET=true
60 ENABLE_INITRAMFS=true
61 ENABLE_IFNAMES=true
62 #------------------------
63 ENABLE_ROOT_SSH=false
64 SSH_LIMIT_USERS=false
65 SSH_ROOT_PUB_KEY="/home/*******/.ssh/authorized_keys"
66 SSH_USER_PUB_KEY="/home/*******/.ssh/authorized_keys"
67 #------------------------
68 BUILD_KERNEL=true
69 KERNEL_REDUCE=false
70 KERNEL_HEADERS=true
71 KERNEL_REMOVESRC=true
72 KERNELSRC_CLEAN=true
73 KERNELSRC_CONFIG=true
74 #------------------------
75 REDUCE_APT=false
76 REDUCE_DOC=true
77 REDUCE_MAN=false
78 REDUCE_HWDB=true
79 REDUCE_BASH=false
80 REDUCE_SSHD=false
81 REDUCE_LOCALE=false
82 #-------------------------
83 ENABLE_CRYPTFS=false
84 #-------------------------
85 BASEDIR=/data/RpiGenImage/Images/${RELEASE}
86 DATE=`date +%Y-%m-%d`
87 IMAGE_NAME=${BASEDIR}/${DATE}-rpiw${RPI_MODEL}-${RELEASE}
88
89
Show file before | Show file after | Hide comments
@@ -1,6 +1,6
1 images
1 images
2 custom.d
2 custom.d
3 packages
4 *.swp
3 *.swp
5 *.bak
4 *.bak
6 *.log
5 *.log
6 *~ No newline at end of file
Show file before | Show file after | Hide comments
@@ -1,403 +1,405
1 # rpi23-gen-image
1 # rpi23-gen-image
2 ## Introduction
2 ## Introduction
3 `rpi23-gen-image.sh` is an advanced Debian Linux bootstrapping shell script for generating Debian OS images for all Raspberry Pi computers. The script at this time supports the bootstrapping of the Debian (armhf/armel) releases `stretch` and `buster`. Raspberry Pi 0/1/2/3/4 images are generated for 32-bit mode only. Raspberry Pi 3 supports 64-bit images that can be generated using custom configuration parameters (```templates/rpi3-stretch-arm64-4.14.y```).
3 `rpi23-gen-image.sh` is an advanced Debian Linux bootstrapping shell script for generating Debian OS images for all Raspberry Pi computers. The script at this time supports the bootstrapping of the Debian (armhf/armel) releases `stretch` and `buster`. Raspberry Pi 0/1/2/3/4 images are generated for 32-bit mode only. Raspberry Pi 3 supports 64-bit images that can be generated using custom configuration parameters (```templates/rpi3-stretch-arm64-4.14.y```).
4
4
5
6
5 ## Build dependencies
7 ## Build dependencies
6 The following list of Debian packages must be installed on the build system because they are essentially required for the bootstrapping process. The script will check if all required packages are installed and missing packages will be installed automatically if confirmed by the user.
8 The following list of Debian packages must be installed on the build system because they are essentially required for the bootstrapping process. The script will check if all required packages are installed and missing packages will be installed automatically if confirmed by the user.
7
9
8 ```debootstrap debian-archive-keyring qemu-user-static binfmt-support dosfstools rsync bmap-tools whois git bc psmisc dbus sudo```
10 ```debootstrap debian-archive-keyring qemu-user-static binfmt-support dosfstools rsync bmap-tools whois git bc psmisc dbus sudo```
9
11
10 It is recommended to configure the `rpi23-gen-image.sh` script to build and install the latest Raspberry Pi Linux kernel. For the Raspberry 3 this is mandatory. Kernel compilation and linking will be performed on the build system using an ARM (armhf/armel/aarch64) cross-compiler toolchain.
12 It is recommended to configure the `rpi23-gen-image.sh` script to build and install the latest Raspberry Pi Linux kernel. For the Raspberry 3 this is mandatory. Kernel compilation and linking will be performed on the build system using an ARM (armhf/armel/aarch64) cross-compiler toolchain.
11
13
12 The script has been tested using the default `crossbuild-essential-armhf` and `crossbuild-essential-armel` toolchain meta packages on Debian Linux `stretch` build systems. Please check the [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains) for further information.
14 The script has been tested using the default `crossbuild-essential-armhf` and `crossbuild-essential-armel` toolchain meta packages on Debian Linux `stretch` build systems. Please check the [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains) for further information.
13
15
14 ## Command-line parameters
16 ## Command-line parameters
15 The script accepts certain command-line parameters to enable or disable specific OS features, services and configuration settings. These parameters are passed to the `rpi23-gen-image.sh` script via (simple) shell-variables. Unlike environment shell-variables (simple) shell-variables are defined at the beginning of the command-line call of the `rpi23-gen-image.sh` script.
17 The script accepts certain command-line parameters to enable or disable specific OS features, services and configuration settings. These parameters are passed to the `rpi23-gen-image.sh` script via (simple) shell-variables. Unlike environment shell-variables (simple) shell-variables are defined at the beginning of the command-line call of the `rpi23-gen-image.sh` script.
16
18
17 ##### Command-line examples:
19 ##### Command-line examples:
18 ```shell
20 ```shell
19 ENABLE_UBOOT=true ./rpi23-gen-image.sh
21 ENABLE_UBOOT=true ./rpi23-gen-image.sh
20 ENABLE_CONSOLE=false ENABLE_IPV6=false ./rpi23-gen-image.sh
22 ENABLE_CONSOLE=false ENABLE_IPV6=false ./rpi23-gen-image.sh
21 ENABLE_WM=xfce4 ENABLE_FBTURBO=true ENABLE_MINBASE=true ./rpi23-gen-image.sh
23 ENABLE_WM=xfce4 ENABLE_FBTURBO=true ENABLE_MINBASE=true ./rpi23-gen-image.sh
22 ENABLE_HARDNET=true ENABLE_IPTABLES=true /rpi23-gen-image.sh
24 ENABLE_HARDNET=true ENABLE_IPTABLES=true /rpi23-gen-image.sh
23 APT_SERVER=ftp.de.debian.org APT_PROXY="http://127.0.0.1:3142/" ./rpi23-gen-image.sh
25 APT_SERVER=ftp.de.debian.org APT_PROXY="http://127.0.0.1:3142/" ./rpi23-gen-image.sh
24 ENABLE_MINBASE=true ./rpi23-gen-image.sh
26 ENABLE_MINBASE=true ./rpi23-gen-image.sh
25 BUILD_KERNEL=true ENABLE_MINBASE=true ENABLE_IPV6=false ./rpi23-gen-image.sh
27 BUILD_KERNEL=true ENABLE_MINBASE=true ENABLE_IPV6=false ./rpi23-gen-image.sh
26 BUILD_KERNEL=true KERNELSRC_DIR=/tmp/linux ./rpi23-gen-image.sh
28 BUILD_KERNEL=true KERNELSRC_DIR=/tmp/linux ./rpi23-gen-image.sh
27 ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
29 ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
28 ENABLE_CRYPTFS=true CRYPTFS_PASSWORD=changeme EXPANDROOT=false ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
30 ENABLE_CRYPTFS=true CRYPTFS_PASSWORD=changeme EXPANDROOT=false ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
29 RELEASE=buster BUILD_KERNEL=true ./rpi23-gen-image.sh
31 RELEASE=buster BUILD_KERNEL=true ./rpi23-gen-image.sh
30 RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
32 RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
31 RELEASE=buster RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
33 RELEASE=buster RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
32 ```
34 ```
33
35
34 ## Configuration template files
36 ## Configuration template files
35 To avoid long lists of command-line parameters and to help to store the favourite parameter configurations the `rpi23-gen-image.sh` script supports so called configuration template files (`CONFIG_TEMPLATE`=template). These are simple text files located in the `./templates` directory that contain the list of configuration parameters that will be used. New configuration template files can be added to the `./templates` directory.
37 To avoid long lists of command-line parameters and to help to store the favourite parameter configurations the `rpi23-gen-image.sh` script supports so called configuration template files (`CONFIG_TEMPLATE`=template). These are simple text files located in the `./templates` directory that contain the list of configuration parameters that will be used. New configuration template files can be added to the `./templates` directory.
36
38
37 ##### Command-line examples:
39 ##### Command-line examples:
38 ```shell
40 ```shell
39 CONFIG_TEMPLATE=rpi3stretch ./rpi23-gen-image.sh
41 CONFIG_TEMPLATE=rpi3stretch ./rpi23-gen-image.sh
40 CONFIG_TEMPLATE=rpi2stretch ./rpi23-gen-image.sh
42 CONFIG_TEMPLATE=rpi2stretch ./rpi23-gen-image.sh
41 ```
43 ```
42
44
43 ## Working with the your template:
45 ## Working with the your template:
44 * **A Pipe ("|") represents a logical OR**
46 * **A Pipe ("|") represents a logical OR**
45 * **A valuetype of boolean represents the options true or false**
47 * **A valuetype of boolean represents the options true or false**
46 * **Values without a default are required if you want do use that feature. It is possible that not every feature has a (working) sanity check.**
48 * **Values without a default are required if you want do use that feature. It is possible that not every feature has a (working) sanity check.**
47 * **If it's not working as expected, search your option in all the files in this repository (With e.g.grep or notepad++).**
49 * **If it's not working as expected, search your option in all the files in this repository (With e.g.grep or notepad++).**
48 * **Check if your missing a required option while looking at the code**
50 * **Check if your missing a required option while looking at the code**
49
51
50 ## Supported parameters and settings
52 ## Supported parameters and settings
51
53
52 #### APT settings:
54 #### APT settings:
53 |Option|Value|default value|value format|desciption|
55 |Option|Value|default value|value format|desciption|
54 |---|---|---|---|---|
56 |---|---|---|---|---|
55 |APT_SERVER|string|ftp.debian.org|`URL`|Set Debian packages server address. Choose a server from the list of Debian worldwide [mirror sites](https://www.debian.org/mirror/list). Using a nearby server will probably speed-up all required downloads within the bootstrapping process.|
57 |APT_SERVER|string|ftp.debian.org|`URL`|Set Debian packages server address. Choose a server from the list of Debian worldwide [mirror sites](https://www.debian.org/mirror/list). Using a nearby server will probably speed-up all required downloads within the bootstrapping process.|
56 |APT_PROXY|string||`URL`|Set Proxy server address. Using a local Proxy-Cache like `apt-cacher-ng` will speed-up the bootstrapping process because all required Debian packages will only be downloaded from the Debian mirror site once. If `apt-cacher-ng` is running on default `http://127.0.0.1:3142` it is autodetected and you don't need to set this.|
58 |APT_PROXY|string||`URL`|Set Proxy server address. Using a local Proxy-Cache like `apt-cacher-ng` will speed-up the bootstrapping process because all required Debian packages will only be downloaded from the Debian mirror site once. If `apt-cacher-ng` is running on default `http://127.0.0.1:3142` it is autodetected and you don't need to set this.|
57 |KEEP_APT_PROXY|boolean|false|`true`\|`false`|true=Keep the APT_PROXY settings used in the bootsrapping process in the generated image|
59 |KEEP_APT_PROXY|boolean|false|`true`\|`false`|true=Keep the APT_PROXY settings used in the bootsrapping process in the generated image|
58 |APT_INCLUDES|string list||`packageA`,`packageB`,...|A comma-separated list of additional packages to be installed by debootstrap during bootstrapping.|
60 |APT_INCLUDES|string list||`packageA`,`packageB`,...|A comma-separated list of additional packages to be installed by debootstrap during bootstrapping.|
59 |APT_INCLUDES_LATE|string list||`packageA`,`packageB`,...|A comma-separated list of additional packages to be installed by apt after bootstrapping and after APT sources are set up. This is useful for packages with pre-depends, which debootstrap do not handle well.|
61 |APT_INCLUDES_LATE|string list||`packageA`,`packageB`,...|A comma-separated list of additional packages to be installed by apt after bootstrapping and after APT sources are set up. This is useful for packages with pre-depends, which debootstrap do not handle well.|
60 |APT_EXCLUDES|string list||`packageA`,`packageB`,...|A comma-separated list of packages to exclude. Use carefully|
62 |APT_EXCLUDES|string list||`packageA`,`packageB`,...|A comma-separated list of packages to exclude. Use carefully|
61 ---
63 ---
62
64
63 #### General system settings:
65 #### General system settings:
64 |Option|Value|default value|value format|desciption|
66 |Option|Value|default value|value format|desciption|
65 |---|---|---|---|---|
67 |---|---|---|---|---|
66 |SET_ARCH|integer|32|`32`\|`64`|Set Architecture to default 32bit. If you want to compile 64-bit (RPI3/RPI3+/RPI4) set it to `64`. This option will set every needed cross-compiler or board specific option for a successful build.|
68 |SET_ARCH|integer|32|`32`\|`64`|Set Architecture to default 32bit. If you want to compile 64-bit (RPI3/RPI3+/RPI4) set it to `64`. This option will set every needed cross-compiler or board specific option for a successful build.|
67 |RPI_MODEL|string|3P|`0`\|`1`\|`1P`\|`2`\|`3`\|`3P`\|`4`|Set Architecture. This option will set most build options accordingly. Specify the target Raspberry Pi hardware model.|
69 |RPI_MODEL|string|3P|`0`\|`1`\|`1P`\|`2`\|`3`\|`3P`\|`4`|Set Architecture. This option will set most build options accordingly. Specify the target Raspberry Pi hardware model.|
68 |RELEASE|string|buster|`jessie`\|`buster`\|`stretch`<br>\|`bullseye`\|`testing`\|`stable`<br>\|`oldstable`|Set the desired Debian release name. The script at this time supports the bootstrapping of the Debian releases `stretch` and `buster`.|
70 |RELEASE|string|buster|`jessie`\|`buster`\|`stretch`<br>\|`bullseye`\|`testing`\|`stable`<br>\|`oldstable`|Set the desired Debian release name. The script at this time supports the bootstrapping of the Debian releases `stretch` and `buster`.|
69 |HOSTNAME|string|RPI_MODEL-RELEASE(e.g. RPI3-buster)|`SomeImageName.img`|Set system hostname. It's recommended that the hostname is unique in the corresponding subnet.|
71 |HOSTNAME|string|RPI_MODEL-RELEASE(e.g. RPI3-buster)|`SomeImageName.img`|Set system hostname. It's recommended that the hostname is unique in the corresponding subnet.|
70 |DEFLOCAL|string|en_US.UTF-8|`Locale.Charset`|Set default system locale. This setting can also be changed inside the running OS using the `dpkg-reconfigure locales` command. Please note that on using this parameter the script will automatically install the required packages `locales`, `keyboard-configuration` and `console-setup`.|
72 |DEFLOCAL|string|en_US.UTF-8|`Locale.Charset`|Set default system locale. This setting can also be changed inside the running OS using the `dpkg-reconfigure locales` command. Please note that on using this parameter the script will automatically install the required packages `locales`, `keyboard-configuration` and `console-setup`.|
71 |TIMEZONE|string|Europe/Berlin|`Timezone`|Set default system timezone. All available timezones can be found in the `/usr/share/zoneinfo/` directory. This setting can also be changed inside the running OS using the `dpkg-reconfigure tzdata` command.|
73 |TIMEZONE|string|Europe/Berlin|`Timezone`|Set default system timezone. All available timezones can be found in the `/usr/share/zoneinfo/` directory. This setting can also be changed inside the running OS using the `dpkg-reconfigure tzdata` command.|
72 |EXPANDROOT|boolean|true|`true`\|`false`|true=Expand the root partition and filesystem automatically on first boot|
74 |EXPANDROOT|boolean|true|`true`\|`false`|true=Expand the root partition and filesystem automatically on first boot|
73
75
74 ---
76 ---
75
77
76 #### User settings:
78 #### User settings:
77 |Option|Value|default value|desciption|
79 |Option|Value|default value|desciption|
78 |---|---|---|---|
80 |---|---|---|---|
79 |ENABLE_ROOT|boolean|false|true=root login if ROOT_PASSWORD is set|
81 |ENABLE_ROOT|boolean|false|true=root login if ROOT_PASSWORD is set|
80 |ROOT_PASSWORD|string|raspberry|Set password for `root` user. It's **STRONGLY** recommended that you choose a custom password.|
82 |ROOT_PASSWORD|string|raspberry|Set password for `root` user. It's **STRONGLY** recommended that you choose a custom password.|
81 |ENABLE_USER|boolean|true|true=Create non-root user with password `USER_PASSWORD` and username `USER_NAME`|
83 |ENABLE_USER|boolean|true|true=Create non-root user with password `USER_PASSWORD` and username `USER_NAME`|
82 |USER_NAME|string|pi|Set username for non-root user, if `ENABLE_USER` is true|
84 |USER_NAME|string|pi|Set username for non-root user, if `ENABLE_USER` is true|
83 |USER_PASSWORD|string|raspberry|Set password for non-root user, if `ENABLE_USER` is true. It's **STRONGLY** recommended that you choose a custom password.|
85 |USER_PASSWORD|string|raspberry|Set password for non-root user, if `ENABLE_USER` is true. It's **STRONGLY** recommended that you choose a custom password.|
84
86
85 ---
87 ---
86
88
87 #### Keyboard settings:
89 #### Keyboard settings:
88
90
89 These options are used to configure keyboard layout in `/etc/default/keyboard` for console and Xorg. These settings can also be changed inside the running OS using the `dpkg-reconfigure keyboard-configuration` command.
91 These options are used to configure keyboard layout in `/etc/default/keyboard` for console and Xorg. These settings can also be changed inside the running OS using the `dpkg-reconfigure keyboard-configuration` command.
90
92
91 |Option|Value|default value|value format|desciption|
93 |Option|Value|default value|value format|desciption|
92 |---|---|---|---|---|
94 |---|---|---|---|---|
93 |XKB_MODEL|string||`pc104`|Set the name of the model of your keyboard type|
95 |XKB_MODEL|string||`pc104`|Set the name of the model of your keyboard type|
94 |XKB_LAYOUT|string||`us`|Set the supported keyboard layout(s)|
96 |XKB_LAYOUT|string||`us`|Set the supported keyboard layout(s)|
95 |XKB_VARIANT|string||`basic`|Set the supported variant(s) of the keyboard layout(s)|
97 |XKB_VARIANT|string||`basic`|Set the supported variant(s) of the keyboard layout(s)|
96 |XKB_OPTIONS|string||`grp:alt_shift_toggle`|Set extra xkb configuration options|
98 |XKB_OPTIONS|string||`grp:alt_shift_toggle`|Set extra xkb configuration options|
97
99
98 ---
100 ---
99
101
100 #### Networking settings:
102 #### Networking settings:
101 ethernet setting go to `/etc/systemd/network/eth0.network`.
103 ethernet setting go to `/etc/systemd/network/eth0.network`.
102 wifi settings go to `/etc/systemd/network/wlan0.network`.
104 wifi settings go to `/etc/systemd/network/wlan0.network`.
103
105
104 The default location of network configuration files in the Debian `stretch` release was changed to `/lib/systemd/network`.`
106 The default location of network configuration files in the Debian `stretch` release was changed to `/lib/systemd/network`.`
105
107
106 |Option|Value|default value|desciption|
108 |Option|Value|default value|desciption|
107 |---|---|---|---|
109 |---|---|---|---|
108 |ENABLE_IPV6|boolean|true|true=Enable IPv6 support via systemd-networkd|
110 |ENABLE_IPV6|boolean|true|true=Enable IPv6 support via systemd-networkd|
109 |ENABLE_WIRELESS|boolean|false|true=Download and install the [closed-source firmware binary blob](https://github.com/RPi-Distro/firmware-nonfree/raw/master/brcm) that is required to run the internal wireless interface of the Raspberry Pi model `3`. This parameter is ignored if the specified `RPI_MODEL` is not `0`,`3`,`3P`,`4`|
111 |ENABLE_WIRELESS|boolean|false|true=Download and install the [closed-source firmware binary blob](https://github.com/RPi-Distro/firmware-nonfree/raw/master/brcm) that is required to run the internal wireless interface of the Raspberry Pi model `3`. This parameter is ignored if the specified `RPI_MODEL` is not `0`,`3`,`3P`,`4`|
110 |ENABLE_IPTABLES|boolean|false|true=Enable iptables IPv4/IPv6 firewall. Simplified ruleset: Allow all outgoing connections. Block all incoming connections except to OpenSSH service.|
112 |ENABLE_IPTABLES|boolean|false|true=Enable iptables IPv4/IPv6 firewall. Simplified ruleset: Allow all outgoing connections. Block all incoming connections except to OpenSSH service.|
111 |ENABLE_HARDNET|boolean|false|true=Enable IPv4/IPv6 network stack hardening settings|
113 |ENABLE_HARDNET|boolean|false|true=Enable IPv4/IPv6 network stack hardening settings|
112 |ENABLE_IFNAMES|boolean|true|true=creates complex and long interface names like e.g. encx8945924. Enable automatic assignment of predictable, stable network interface names for all NICs|
114 |ENABLE_IFNAMES|boolean|true|true=creates complex and long interface names like e.g. encx8945924. Enable automatic assignment of predictable, stable network interface names for all NICs|
113
115
114 ---
116 ---
115
117
116 #### Networking settings (DHCP):
118 #### Networking settings (DHCP):
117
119
118
120
119 |Option|Value|default value|desciption|
121 |Option|Value|default value|desciption|
120 |---|---|---|---|
122 |---|---|---|---|
121 |ENABLE_ETH_DHCP|boolean|true|Set the system to use DHCP on wired interface. This requires an DHCP server|
123 |ENABLE_ETH_DHCP|boolean|true|Set the system to use DHCP on wired interface. This requires an DHCP server|
122 |ENABLE_WIFI_DHCP|boolean|true|Set the system to use DHCP on wifi interface. This requires an DHCP server. Requires ENABLE_WIRELESS|
124 |ENABLE_WIFI_DHCP|boolean|true|Set the system to use DHCP on wifi interface. This requires an DHCP server. Requires ENABLE_WIRELESS|
123
125
124 ---
126 ---
125
127
126 #### Networking settings (ethernet static):
128 #### Networking settings (ethernet static):
127 The following static networking parameters are only supported if `ENABLE_ETH_DHCP` was set to `false`.
129 The following static networking parameters are only supported if `ENABLE_ETH_DHCP` was set to `false`.
128
130
129 |Option|Value|value format|desciption|
131 |Option|Value|value format|desciption|
130 |---|---|---|---|
132 |---|---|---|---|
131 |NET_ETH_ADDRESS|string|`CIDR`|static IPv4 or IPv6 address and its prefix, separated by "/", eg. "192.169.0.3/24"|
133 |NET_ETH_ADDRESS|string|`CIDR`|static IPv4 or IPv6 address and its prefix, separated by "/", eg. "192.169.0.3/24"|
132 |NET_ETH_GATEWAY|string|`IP`|default gateway|
134 |NET_ETH_GATEWAY|string|`IP`|default gateway|
133 |NET_ETH_DNS_1|string|`IP`|first DNS server|
135 |NET_ETH_DNS_1|string|`IP`|first DNS server|
134 |NET_ETH_DNS_2|string|`IP`|second DNS server|
136 |NET_ETH_DNS_2|string|`IP`|second DNS server|
135 |NET_ETH_DNS_DOMAINS|string|`example.local`|default DNS search domains to use for non fully qualified hostnames|
137 |NET_ETH_DNS_DOMAINS|string|`example.local`|default DNS search domains to use for non fully qualified hostnames|
136 |NET_ETH_NTP_1|string|`IP`|first NTP server|
138 |NET_ETH_NTP_1|string|`IP`|first NTP server|
137 |NET_ETH_NTP_2|string|`IP`|second NTP server|
139 |NET_ETH_NTP_2|string|`IP`|second NTP server|
138
140
139 ---
141 ---
140
142
141 #### Networking settings (WIFI):
143 #### Networking settings (WIFI):
142
144
143 |Option|Value|value format|desciption|
145 |Option|Value|value format|desciption|
144 |---|---|---|---|
146 |---|---|---|---|
145 |NET_WIFI_SSID|string|`yourwifiname`|WIFI SSID|
147 |NET_WIFI_SSID|string|`yourwifiname`|WIFI SSID|
146 |NET_WIFI_PSK|string|`yourwifikeytojoinnetwork`|WPA/WPA2 PSK|
148 |NET_WIFI_PSK|string|`yourwifikeytojoinnetwork`|WPA/WPA2 PSK|
147
149
148 ---
150 ---
149
151
150 #### Networking settings (WIFI static):
152 #### Networking settings (WIFI static):
151 The following static networking parameters are only supported if `ENABLE_WIFI_DHCP` was set to `false`.
153 The following static networking parameters are only supported if `ENABLE_WIFI_DHCP` was set to `false`.
152
154
153 |Option|Value|value format|desciption|
155 |Option|Value|value format|desciption|
154 |---|---|---|---|
156 |---|---|---|---|
155 |NET_WIFI_ADDRESS|string|`CIDR`|static IPv4 or IPv6 address and its prefix, separated by "/", eg. "192.169.0.3/24"|
157 |NET_WIFI_ADDRESS|string|`CIDR`|static IPv4 or IPv6 address and its prefix, separated by "/", eg. "192.169.0.3/24"|
156 |NET_WIFI_GATEWAY|string|`IP`|default gateway|
158 |NET_WIFI_GATEWAY|string|`IP`|default gateway|
157 |NET_WIFI_DNS_1|string|`IP`|first DNS server|
159 |NET_WIFI_DNS_1|string|`IP`|first DNS server|
158 |NET_WIFI_DNS_2|string|`IP`|second DNS server|
160 |NET_WIFI_DNS_2|string|`IP`|second DNS server|
159 |NET_WIFI_DNS_DOMAINS|string|`example.local`|default DNS search domains to use for non fully qualified hostnames|
161 |NET_WIFI_DNS_DOMAINS|string|`example.local`|default DNS search domains to use for non fully qualified hostnames|
160 |NET_WIFI_NTP_1|string|`IP`|first NTP server|
162 |NET_WIFI_NTP_1|string|`IP`|first NTP server|
161 |NET_WIFI_NTP_2|string|`IP`|second NTP server|
163 |NET_WIFI_NTP_2|string|`IP`|second NTP server|
162
164
163 ---
165 ---
164
166
165 #### Basic system features:
167 #### Basic system features:
166
168
167 |Option|Value|default value|value format|desciption|
169 |Option|Value|default value|value format|desciption|
168 |---|---|---|---|---|
170 |---|---|---|---|---|
169 |ENABLE_CONSOLE|boolean|false|`true`\|`false`|true=Enable serial console interface.Recommended if no monitor or keyboard is connected to the RPi2/3. In case of problems fe. if the network (auto) configuration failed - the serial console can be used to access the system. On RPI `0` `3` `3P` the CPU speed is locked at lowest speed.|
171 |ENABLE_CONSOLE|boolean|false|`true`\|`false`|true=Enable serial console interface.Recommended if no monitor or keyboard is connected to the RPi2/3. In case of problems fe. if the network (auto) configuration failed - the serial console can be used to access the system. On RPI `0` `3` `3P` the CPU speed is locked at lowest speed.|
170 |ENABLE_PRINTK|boolean|false|`true`\|`false`|true=Enables printing kernel messages to konsole. printk is `3 4 1 3` as in raspbian|
172 |ENABLE_PRINTK|boolean|false|`true`\|`false`|true=Enables printing kernel messages to konsole. printk is `3 4 1 3` as in raspbian|
171 |ENABLE_BLUETOOTH|boolean|false|`true`\|`false`|true=Enable onboard Bluetooth interface on the RPi0/3/3P. See: [Configuring the GPIO serial port on Raspbian jessie and stretch](https://spellfoundry.com/2016/05/29/configuring-gpio-serial-port-raspbian-jessie-including-pi-3/)|
173 |ENABLE_BLUETOOTH|boolean|false|`true`\|`false`|true=Enable onboard Bluetooth interface on the RPi0/3/3P. See: [Configuring the GPIO serial port on Raspbian jessie and stretch](https://spellfoundry.com/2016/05/29/configuring-gpio-serial-port-raspbian-jessie-including-pi-3/)|
172 |ENABLE_MINIUART_OVERLAY|boolean|false|`true`\|`false`|true=Enable Bluetooth to use this. Adds overlay to swap UART0 with UART1. Enabling (slower) Bluetooth and full speed serial console. - RPI `0` `3` `3P` have a fast `hardware UART0` (ttyAMA0) and a `mini UART1` (ttyS0)! RPI `1` `1P` `2` only have a `hardware UART0`. `UART0` is considered better, because is faster and more stable than `mini UART1`. By default the Bluetooth modem is mapped to the `hardware UART0` and `mini UART` is used for console. The `mini UART` is a problem for the serial console, because its baudrate depends on the CPU frequency, which is changing on runtime. Resulting in a volatile baudrate and thus in an unusable serial console.|
174 |ENABLE_MINIUART_OVERLAY|boolean|false|`true`\|`false`|true=Enable Bluetooth to use this. Adds overlay to swap UART0 with UART1. Enabling (slower) Bluetooth and full speed serial console. - RPI `0` `3` `3P` have a fast `hardware UART0` (ttyAMA0) and a `mini UART1` (ttyS0)! RPI `1` `1P` `2` only have a `hardware UART0`. `UART0` is considered better, because is faster and more stable than `mini UART1`. By default the Bluetooth modem is mapped to the `hardware UART0` and `mini UART` is used for console. The `mini UART` is a problem for the serial console, because its baudrate depends on the CPU frequency, which is changing on runtime. Resulting in a volatile baudrate and thus in an unusable serial console.|
173 |ENABLE_TURBO|boolean|false|`true`\|`false`|true=Enable Turbo mode. This setting locks cpu at the highest frequency. As setting ENABLE_CONSOLE=true locks RPI to lowest CPU speed, this is can be used additionally to lock cpu hat max speed. Need a good power supply and probably cooling for the Raspberry PI|
175 |ENABLE_TURBO|boolean|false|`true`\|`false`|true=Enable Turbo mode. This setting locks cpu at the highest frequency. As setting ENABLE_CONSOLE=true locks RPI to lowest CPU speed, this is can be used additionally to lock cpu hat max speed. Need a good power supply and probably cooling for the Raspberry PI|
174 |ENABLE_I2C|boolean|true|`true`\|`false`|true=Enable I2C interface on the RPi 0/1/2/3. Please check the [RPi 0/1/2/3 pinout diagrams](https://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins|
176 |ENABLE_I2C|boolean|true|`true`\|`false`|true=Enable I2C interface on the RPi 0/1/2/3. Please check the [RPi 0/1/2/3 pinout diagrams](https://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins|
175 |ENABLE_SPI|boolean|true|`true`\|`false`|true=Enable SPI interface on the RPi 0/1/2/3. Please check the [RPi 0/1/2/3 pinout diagrams](https://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins|
177 |ENABLE_SPI|boolean|true|`true`\|`false`|true=Enable SPI interface on the RPi 0/1/2/3. Please check the [RPi 0/1/2/3 pinout diagrams](https://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins|
176 |SSH_ENABLE|boolean|true|`true`\|`false`|Install and enable OpenSSH service. The default configuration of the service doesn't allow `root` to login. Please use the user `pi` instead and `su -` or `sudo` to execute commands as root|
178 |SSH_ENABLE|boolean|true|`true`\|`false`|Install and enable OpenSSH service. The default configuration of the service doesn't allow `root` to login. Please use the user `pi` instead and `su -` or `sudo` to execute commands as root|
177 |ENABLE_NONFREE|boolean|false|`true`\|`false`|true=enable non-free\|false=disable non free. Edits /etc/apt/sources.list in your resulting image|
179 |ENABLE_NONFREE|boolean|false|`true`\|`false`|true=enable non-free\|false=disable non free. Edits /etc/apt/sources.list in your resulting image|
178 |ENABLE_RSYSLOG|boolean|false|`true`\|`false`|true=keep rsyslog\|false=remove rsyslog. If rsyslog is removed (false), logs will be available only in journal files)|
180 |ENABLE_RSYSLOG|boolean|false|`true`\|`false`|true=keep rsyslog\|false=remove rsyslog. If rsyslog is removed (false), logs will be available only in journal files)|
179 |ENABLE_SOUND|boolean|false|`true`\|`false`|true=Enable sound\|false=Disable sound|
181 |ENABLE_SOUND|boolean|false|`true`\|`false`|true=Enable sound\|false=Disable sound|
180 |ENABLE_HWRANDOM|boolean|true|`true`\|`false`|true=Enable Hardware Random Number Generator(RNG)\|false=Disable Hardware RNG\|Strong random numbers are important for most network-based communications that use encryption. It's recommended to be enabled|
182 |ENABLE_HWRANDOM|boolean|true|`true`\|`false`|true=Enable Hardware Random Number Generator(RNG)\|false=Disable Hardware RNG\|Strong random numbers are important for most network-based communications that use encryption. It's recommended to be enabled|
181 |ENABLE_MINGPU|boolean|false|`true`\|`false`|true=GPU 16MB RAM\|false=64MB RAM\|Minimize the amount of shared memory reserved for the GPU. It doesn't seem to be possible to fully disable the GPU. Also removes start.elf,fixup.dat,start_x.elf,fixup_x.dat form /boot|
183 |ENABLE_MINGPU|boolean|false|`true`\|`false`|true=GPU 16MB RAM\|false=64MB RAM\|Minimize the amount of shared memory reserved for the GPU. It doesn't seem to be possible to fully disable the GPU. Also removes start.elf,fixup.dat,start_x.elf,fixup_x.dat form /boot|
182 |ENABLE_XORG|boolean|false|`true`\|`false`|true=Install Xorg X Window System|\false=install no Xorg|
184 |ENABLE_XORG|boolean|false|`true`\|`false`|true=Install Xorg X Window System|\false=install no Xorg|
183 |ENABLE_WM|string||`blackbox`, `openbox`, `fluxbox`,<br> `jwm`, `dwm`, `xfce4`, `awesome`|Install a user-defined window manager for the X Window System. To make sure all X related package dependencies are getting installed `ENABLE_XORG` will automatically set true if `ENABLE_WM` is used|
185 |ENABLE_WM|string||`blackbox`, `openbox`, `fluxbox`,<br> `jwm`, `dwm`, `xfce4`, `awesome`|Install a user-defined window manager for the X Window System. To make sure all X related package dependencies are getting installed `ENABLE_XORG` will automatically set true if `ENABLE_WM` is used|
184 |ENABLE_SYSVINIT|boolean|false|`true`\|`false`|true=Support for halt,init,poweroff,reboot,runlevel,shutdown,init commands\|false=use systemd commands|
186 |ENABLE_SYSVINIT|boolean|false|`true`\|`false`|true=Support for halt,init,poweroff,reboot,runlevel,shutdown,init commands\|false=use systemd commands|
185 |ENABLE_SPLASH|boolean|true|`true`\|`false`|true=Enable default Raspberry Pi boot up rainbow splash screen|
187 |ENABLE_SPLASH|boolean|true|`true`\|`false`|true=Enable default Raspberry Pi boot up rainbow splash screen|
186 |ENABLE_LOGO|boolean|true|`true`\|`false`|true=Enable default Raspberry Pi console logo (image of four raspberries in the top left corner)|
188 |ENABLE_LOGO|boolean|true|`true`\|`false`|true=Enable default Raspberry Pi console logo (image of four raspberries in the top left corner)|
187 |ENABLE_SILENT_BOOT|boolean|false|`true`\|`false`|true=Set the verbosity of console messages shown during boot up to a strict minimum|
189 |ENABLE_SILENT_BOOT|boolean|false|`true`\|`false`|true=Set the verbosity of console messages shown during boot up to a strict minimum|
188 |DISABLE_UNDERVOLT_WARNINGS|integer||`1`\|`2`|Unset to keep default behaviour. Setting the parameter to `1` will disable the warning overlay. Setting it to `2` will additionally allow RPi2/3 turbo mode when low-voltage is present|
190 |DISABLE_UNDERVOLT_WARNINGS|integer||`1`\|`2`|Unset to keep default behaviour. Setting the parameter to `1` will disable the warning overlay. Setting it to `2` will additionally allow RPi2/3 turbo mode when low-voltage is present|
189
191
190 ---
192 ---
191
193
192 #### Advanced system features:
194 #### Advanced system features:
193
195
194 |Option|Value|default value|value format|desciption|
196 |Option|Value|default value|value format|desciption|
195 |---|---|---|---|---|
197 |---|---|---|---|---|
196 |ENABLE_DPHYSSWAP|boolean|true|`true`\|`false`|Enable swap. The size of the swapfile is chosen relative to the size of the root partition. It'll use the `dphys-swapfile` package for that|
198 |ENABLE_DPHYSSWAP|boolean|true|`true`\|`false`|Enable swap. The size of the swapfile is chosen relative to the size of the root partition. It'll use the `dphys-swapfile` package for that|
197 |ENABLE_SYSTEMDSWAP|boolean|false|`true`\|`false`|Enables [Systemd-swap service](https://github.com/Nefelim4ag/systemd-swap). Usefull if `KERNEL_ZSWAP` is enabled|
199 |ENABLE_SYSTEMDSWAP|boolean|false|`true`\|`false`|Enables [Systemd-swap service](https://github.com/Nefelim4ag/systemd-swap). Usefull if `KERNEL_ZSWAP` is enabled|
198 |ENABLE_QEMU|boolean|false|`true`\|`false`|Generate kernel (`vexpress_defconfig`), file system image (`qcow2`) and DTB files that can be used for QEMU full system emulation (`vexpress-A15`). The output files are stored in the `$(pwd)/images/qemu` directory. You can find more information about running the generated image in the QEMU section of this readme file|
200 |ENABLE_QEMU|boolean|false|`true`\|`false`|Generate kernel (`vexpress_defconfig`), file system image (`qcow2`) and DTB files that can be used for QEMU full system emulation (`vexpress-A15`). The output files are stored in the `$(pwd)/images/qemu` directory. You can find more information about running the generated image in the QEMU section of this readme file|
199 |QEMU_BINARY|string||`FullPathToQemuBinaryFile`|Sets the QEMU enviornment for the Debian archive. **Set by RPI_MODEL**|
201 |QEMU_BINARY|string||`FullPathToQemuBinaryFile`|Sets the QEMU enviornment for the Debian archive. **Set by RPI_MODEL**|
200 |ENABLE_KEYGEN|boolean|false|`true`\|`false`|Recover your lost codec license|
202 |ENABLE_KEYGEN|boolean|false|`true`\|`false`|Recover your lost codec license|
201 |ENABLE_MINBASE|boolean|false|`true`\|`false`|Use debootstrap script variant `minbase` which only includes essential packages and apt. This will reduce the disk usage by about 65 MB|
203 |ENABLE_MINBASE|boolean|false|`true`\|`false`|Use debootstrap script variant `minbase` which only includes essential packages and apt. This will reduce the disk usage by about 65 MB|
202 |ENABLE_SPLITFS|boolean|false|`true`\|`false`|Enable having root partition on an USB drive by creating two image files: one for the `/boot/firmware` mount point, and another for `/`|
204 |ENABLE_SPLITFS|boolean|false|`true`\|`false`|Enable having root partition on an USB drive by creating two image files: one for the `/boot/firmware` mount point, and another for `/`|
203 |ENABLE_INITRAMFS|boolean|false|`true`\|`false`|Create an initramfs that that will be loaded during the Linux startup process. `ENABLE_INITRAMFS` will automatically get enabled if `ENABLE_CRYPTFS`=true. This parameter will be ignored if `BUILD_KERNEL`=false|
205 |ENABLE_INITRAMFS|boolean|false|`true`\|`false`|Create an initramfs that that will be loaded during the Linux startup process. `ENABLE_INITRAMFS` will automatically get enabled if `ENABLE_CRYPTFS`=true. This parameter will be ignored if `BUILD_KERNEL`=false|
204 |ENABLE_DBUS|boolean|true|`true`\|`false`|Install and enable D-Bus message bus. Please note that systemd should work without D-bus but it's recommended to be enabled|
206 |ENABLE_DBUS|boolean|true|`true`\|`false`|Install and enable D-Bus message bus. Please note that systemd should work without D-bus but it's recommended to be enabled|
205 |ENABLE_USBBOOT|boolean|false|`true`\|`false`|true=prepare image for usbboot. use with `ENABLE_SPLTFS`=true|
207 |ENABLE_USBBOOT|boolean|false|`true`\|`false`|true=prepare image for usbboot. use with `ENABLE_SPLTFS`=true|
206 |CHROOT_SCRIPTS|string||`FullPathToScriptFolder`|Full path to a directory with scripts that should be run in the chroot before the image is finally built. Every executable file in this directory is run in lexicographical order|
208 |CHROOT_SCRIPTS|string||`FullPathToScriptFolder`|Full path to a directory with scripts that should be run in the chroot before the image is finally built. Every executable file in this directory is run in lexicographical order|
207 |ENABLE_UBOOT|boolean|false|`true`\|`false`|Replace the default RPi 0/1/2/3 second stage bootloader (bootcode.bin) with [U-Boot bootloader](https://git.denx.de/?p=u-boot.git;a=summary). U-Boot can boot images via the network using the BOOTP/TFTP protocol. RPI4 needs tbd|
209 |ENABLE_UBOOT|boolean|false|`true`\|`false`|Replace the default RPi 0/1/2/3 second stage bootloader (bootcode.bin) with [U-Boot bootloader](https://git.denx.de/?p=u-boot.git;a=summary). U-Boot can boot images via the network using the BOOTP/TFTP protocol. RPI4 needs tbd|
208 |UBOOTSRC_DIR|string||`FullPathToUBootFolder`|Full path to a directory named `u-boot` of [U-Boot bootloader sources](https://git.denx.de/?p=u-boot.git;a=summary) that will be copied, configured, build and installed inside the chroot|
210 |UBOOTSRC_DIR|string||`FullPathToUBootFolder`|Full path to a directory named `u-boot` of [U-Boot bootloader sources](https://git.denx.de/?p=u-boot.git;a=summary) that will be copied, configured, build and installed inside the chroot|
209 |ENABLE_FBTURBO|boolean|false|`true`\|`false`|Install and enable the [hardware accelerated Xorg video driver](https://github.com/ssvb/xf86-video-fbturbo) `fbturbo`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling|
211 |ENABLE_FBTURBO|boolean|false|`true`\|`false`|Install and enable the [hardware accelerated Xorg video driver](https://github.com/ssvb/xf86-video-fbturbo) `fbturbo`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling|
210 |FBTURBOSRC_DIR|string||`FullPathToFbTurboFolder`|Full path to a directory named `xf86-video-fbturbo` of [hardware accelerated Xorg video driver sources](https://github.com/ssvb/xf86-video-fbturbo) that will be copied, configured, build and installed inside the chroot|
212 |FBTURBOSRC_DIR|string||`FullPathToFbTurboFolder`|Full path to a directory named `xf86-video-fbturbo` of [hardware accelerated Xorg video driver sources](https://github.com/ssvb/xf86-video-fbturbo) that will be copied, configured, build and installed inside the chroot|
211 |ENABLE_VIDEOCORE|boolean|false|`true`\|`false`|Install and enable the [ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) `vcgencmd`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling|
213 |ENABLE_VIDEOCORE|boolean|false|`true`\|`false`|Install and enable the [ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) `vcgencmd`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling|
212 |VIDEOCORESRC_DIR|string||`FullPathToVideoSrcFolder`|Full path to a directory named `userland` of [ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) that will be copied, configured, build and installed inside the chroot|
214 |VIDEOCORESRC_DIR|string||`FullPathToVideoSrcFolder`|Full path to a directory named `userland` of [ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) that will be copied, configured, build and installed inside the chroot|
213 |ENABLE_NEXMON|boolean|false|`true`\|`false`|Install and enable the source code for a C-based firmware patching framework for Broadcom/Cypress WiFi chips that enables you to write your own firmware patches, for example, to enable monitor mode with radiotap headers and frame injection](https://github.com/seemoo-lab/nexmon.git)|
215 |ENABLE_NEXMON|boolean|false|`true`\|`false`|Install and enable the source code for a C-based firmware patching framework for Broadcom/Cypress WiFi chips that enables you to write your own firmware patches, for example, to enable monitor mode with radiotap headers and frame injection](https://github.com/seemoo-lab/nexmon.git)|
214 |NEXMONSRC_DIR|string||`FullPathToNexmonFolder`|Full path to a directory named `nexmon` of [Source code for ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) that will be copied, configured, build and installed inside the chroot|
216 |NEXMONSRC_DIR|string||`FullPathToNexmonFolder`|Full path to a directory named `nexmon` of [Source code for ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) that will be copied, configured, build and installed inside the chroot|
215
217
216 ---
218 ---
217
219
218 #### SSH settings:
220 #### SSH settings:
219
221
220 |Option|Value|default value|value format|desciption|
222 |Option|Value|default value|value format|desciption|
221 |---|---|---|---|---|
223 |---|---|---|---|---|
222 |SSH_ENABLE_ROOT|boolean|false|`true`\|`false`|Enable password-based root login via SSH. This may be a security risk with the default password set, use only in trusted environments. `ENABLE_ROOT` must be set to `true`|
224 |SSH_ENABLE_ROOT|boolean|false|`true`\|`false`|Enable password-based root login via SSH. This may be a security risk with the default password set, use only in trusted environments. `ENABLE_ROOT` must be set to `true`|
223 |SSH_DISABLE_PASSWORD_AUTH|boolean|false|`true`\|`false`|Disable password-based SSH authentication. Only public key based SSH (v2) authentication will be supported|
225 |SSH_DISABLE_PASSWORD_AUTH|boolean|false|`true`\|`false`|Disable password-based SSH authentication. Only public key based SSH (v2) authentication will be supported|
224 |SSH_LIMIT_USERS|boolean|false|`true`\|`false`|Limit the users that are allowed to login via SSH. Only allow user `USER_NAME`=pi and root if `SSH_ENABLE_ROOT`=true to login. This parameter will be ignored if `dropbear` SSH is used (`REDUCE_SSHD`=true)|
226 |SSH_LIMIT_USERS|boolean|false|`true`\|`false`|Limit the users that are allowed to login via SSH. Only allow user `USER_NAME`=pi and root if `SSH_ENABLE_ROOT`=true to login. This parameter will be ignored if `dropbear` SSH is used (`REDUCE_SSHD`=true)|
225 |SSH_ROOT_PUB_KEY|string||`PathToYourROOT`<br>`RSAPublicKeyFile`|Full path to file. Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `root`. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported. `ENABLE_ROOT` **and** `SSH_ENABLE_ROOT` must be set to `true`|
227 |SSH_ROOT_PUB_KEY|string||`PathToYourROOT`<br>`RSAPublicKeyFile`|Full path to file. Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `root`. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported. `ENABLE_ROOT` **and** `SSH_ENABLE_ROOT` must be set to `true`|
226 |SSH_USER_PUB_KEY|string||`PathToYourUSER`<br>`RSAPublicKeyFile`|Full path to file. Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `USER_NAME`=pi. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported|
228 |SSH_USER_PUB_KEY|string||`PathToYourUSER`<br>`RSAPublicKeyFile`|Full path to file. Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `USER_NAME`=pi. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported|
227
229
228 ---
230 ---
229
231
230 #### Kernel settings:
232 #### Kernel settings:
231
233
232 |Option|Value|default value|value format|desciption|
234 |Option|Value|default value|value format|desciption|
233 |---|---|---|---|---|
235 |---|---|---|---|---|
234 |BUILD_KERNEL||true|`true`\|`false`|Build and install the latest RPi 0/1/2/3/4 Linux kernel. The default RPi 0/1/2/3/ kernel configuration is used most of the time. ENABLE_NEXMON - Changes Kernel Source to [https://github.com/Re4son/](Kali Linux Kernel) Precompiled 32bit kernel for RPI0/1/2/3 by [https://github.com/hypriot/](hypriot) Precompiled 64bit kernel for RPI3/4 by [https://github.com/sakaki-/](sakaki)|
236 |BUILD_KERNEL||true|`true`\|`false`|Build and install the latest RPi 0/1/2/3/4 Linux kernel. The default RPi 0/1/2/3/ kernel configuration is used most of the time. ENABLE_NEXMON - Changes Kernel Source to [https://github.com/Re4son/](Kali Linux Kernel) Precompiled 32bit kernel for RPI0/1/2/3 by [https://github.com/hypriot/](hypriot) Precompiled 64bit kernel for RPI3/4 by [https://github.com/sakaki-/](sakaki)|
235 |CROSS_COMPILE|string|||This sets the cross-compile environment for the compiler. Set by RPI_MODEL|
237 |CROSS_COMPILE|string|||This sets the cross-compile environment for the compiler. Set by RPI_MODEL|
236 |KERNEL_ARCH|string|||This sets the kernel architecture for the compiler. Set by RPI_MODEL|
238 |KERNEL_ARCH|string|||This sets the kernel architecture for the compiler. Set by RPI_MODEL|
237 |KERNEL_IMAGE|string|||Name of the image file in the boot partition. Set by RPI_MODEL|
239 |KERNEL_IMAGE|string|||Name of the image file in the boot partition. Set by RPI_MODEL|
238 |KERNEL_BRANCH|string|||Name of the requested branch from the GIT location for the RPi Kernel. Default is using the current default branch from the GIT site|
240 |KERNEL_BRANCH|string|||Name of the requested branch from the GIT location for the RPi Kernel. Default is using the current default branch from the GIT site|
239 |KERNEL_DEFCONFIG|string|||Sets the default config for kernel compiling. Set by RPI_MODEL|
241 |KERNEL_DEFCONFIG|string|||Sets the default config for kernel compiling. Set by RPI_MODEL|
240 |KERNEL_THREADS|integer|1|`1`\|`2`\|`3`\|...|Number of threads to build the kernel. If not set, the script will automatically determine the maximum number of CPU cores to speed up kernel compilation|
242 |KERNEL_THREADS|integer|1|`1`\|`2`\|`3`\|...|Number of threads to build the kernel. If not set, the script will automatically determine the maximum number of CPU cores to speed up kernel compilation|
241 |KERNEL_HEADERS|boolean|true|`true`\|`false`|Install kernel headers with the built kernel|
243 |KERNEL_HEADERS|boolean|true|`true`\|`false`|Install kernel headers with the built kernel|
242 |KERNEL_MENUCONFIG|boolean|false|`true`\|`false`|Start `make menuconfig` interactive menu-driven kernel configuration. The script will continue after `make menuconfig` was terminated|
244 |KERNEL_MENUCONFIG|boolean|false|`true`\|`false`|Start `make menuconfig` interactive menu-driven kernel configuration. The script will continue after `make menuconfig` was terminated|
243 |KERNEL_OLDDEFCONFIG|boolean|false|`true`\|`false`|Run `make olddefconfig` to automatically set all new kernel configuration options to their recommended default values|
245 |KERNEL_OLDDEFCONFIG|boolean|false|`true`\|`false`|Run `make olddefconfig` to automatically set all new kernel configuration options to their recommended default values|
244 |KERNEL_CCACHE|boolean|false|`true`\|`false`|Compile the kernel using ccache. This speeds up kernel recompilation by caching previous compilations and detecting when the same compilation is being done again|
246 |KERNEL_CCACHE|boolean|false|`true`\|`false`|Compile the kernel using ccache. This speeds up kernel recompilation by caching previous compilations and detecting when the same compilation is being done again|
245 |KERNEL_REMOVESRC|boolean|true|`true`\|`false`|Remove all kernel sources from the generated OS image after it was built and installed|
247 |KERNEL_REMOVESRC|boolean|true|`true`\|`false`|Remove all kernel sources from the generated OS image after it was built and installed|
246 |KERNELSRC_DIR|string||`FullPathToKernelSrcDir`|Full path to a directory named `linux` of [RaspberryPi Linux kernel sources](https://github.com/raspberrypi/linux) that will be copied, configured, build and installed inside the chroot|
248 |KERNELSRC_DIR|string||`FullPathToKernelSrcDir`|Full path to a directory named `linux` of [RaspberryPi Linux kernel sources](https://github.com/raspberrypi/linux) that will be copied, configured, build and installed inside the chroot|
247 |KERNELSRC_CLEAN|boolean|false|`true`\|`false`|Clean the existing kernel sources directory `KERNELSRC_DIR` (using `make mrproper`) after it was copied to the chroot and before the compilation of the kernel has started. This parameter will be ignored if no `KERNELSRC_DIR` was specified or if `KERNELSRC_PREBUILT`=true|
249 |KERNELSRC_CLEAN|boolean|false|`true`\|`false`|Clean the existing kernel sources directory `KERNELSRC_DIR` (using `make mrproper`) after it was copied to the chroot and before the compilation of the kernel has started. This parameter will be ignored if no `KERNELSRC_DIR` was specified or if `KERNELSRC_PREBUILT`=true|
248 |KERNELSRC_CONFIG|boolean|true|`true`\|`false`|true=enable custom kernel options. This parameter is automatically set to `true` if no existing kernel sources directory was specified using `KERNELSRC_DIR`. This parameter is ignored if `KERNELSRC_PREBUILT`=true|
250 |KERNELSRC_CONFIG|boolean|true|`true`\|`false`|true=enable custom kernel options. This parameter is automatically set to `true` if no existing kernel sources directory was specified using `KERNELSRC_DIR`. This parameter is ignored if `KERNELSRC_PREBUILT`=true|
249 |KERNELSRC_USRCONFIG|string||`FullPathToUserKernel.config`|Copy own config file to kernel `.config`. If `KERNEL_MENUCONFIG`=true then running after copy|
251 |KERNELSRC_USRCONFIG|string||`FullPathToUserKernel.config`|Copy own config file to kernel `.config`. If `KERNEL_MENUCONFIG`=true then running after copy|
250 |KERNELSRC_PREBUILT|boolean|false|`true`\|`false`|With this parameter set to true the script expects the existing kernel sources directory to be already successfully cross-compiled. The parameters `KERNELSRC_CLEAN`, `KERNELSRC_CONFIG`, `KERNELSRC_USRCONFIG` and `KERNEL_MENUCONFIG` are ignored and no kernel compilation tasks are performed|
252 |KERNELSRC_PREBUILT|boolean|false|`true`\|`false`|With this parameter set to true the script expects the existing kernel sources directory to be already successfully cross-compiled. The parameters `KERNELSRC_CLEAN`, `KERNELSRC_CONFIG`, `KERNELSRC_USRCONFIG` and `KERNEL_MENUCONFIG` are ignored and no kernel compilation tasks are performed|
251 |RPI_FIRMWARE_DIR|string||`FullPathToFolder`|Full path to a directory named `firmware`, containing a local copy of the firmware from the [RaspberryPi firmware project](https://github.com/raspberrypi/firmware). Default is to download the latest firmware directly from the project|
253 |RPI_FIRMWARE_DIR|string||`FullPathToFolder`|Full path to a directory named `firmware`, containing a local copy of the firmware from the [RaspberryPi firmware project](https://github.com/raspberrypi/firmware). Default is to download the latest firmware directly from the project|
252 |KERNEL_DEFAULT_GOV|string|ondemand|`performance`\|`powersave`<br>\|`userspace`\|`ondemand`<br>\|`conservative`\|`schedutil`|Set the default cpu governor at kernel compilation|
254 |KERNEL_DEFAULT_GOV|string|ondemand|`performance`\|`powersave`<br>\|`userspace`\|`ondemand`<br>\|`conservative`\|`schedutil`|Set the default cpu governor at kernel compilation|
253 |KERNEL_NF|boolean|false|`true`\|`false`|Enable Netfilter modules as kernel modules. You want that for iptables|
255 |KERNEL_NF|boolean|false|`true`\|`false`|Enable Netfilter modules as kernel modules. You want that for iptables|
254 |KERNEL_VIRT|boolean|false|`true`\|`false`|Enable Kernel KVM support (/dev/kvm)|
256 |KERNEL_VIRT|boolean|false|`true`\|`false`|Enable Kernel KVM support (/dev/kvm)|
255 |KERNEL_ZSWAP|boolean|false|`true`\|`false`|Enable Kernel Zswap support. Best use on high RAM load and mediocre CPU load usecases|
257 |KERNEL_ZSWAP|boolean|false|`true`\|`false`|Enable Kernel Zswap support. Best use on high RAM load and mediocre CPU load usecases|
256 |KERNEL_BPF|boolean|true|`true`\|`false`|Allow attaching eBPF programs to a cgroup using the bpf syscall (CONFIG_BPF_SYSCALL CONFIG_CGROUP_BPF) [systemd wants it - File /lib/systemd/system/systemd-journald.server:36 configures an IP firewall (IPAddressDeny=all), but the local system does not support BPF/cgroup based firewalls]|
258 |KERNEL_BPF|boolean|true|`true`\|`false`|Allow attaching eBPF programs to a cgroup using the bpf syscall (CONFIG_BPF_SYSCALL CONFIG_CGROUP_BPF) [systemd wants it - File /lib/systemd/system/systemd-journald.server:36 configures an IP firewall (IPAddressDeny=all), but the local system does not support BPF/cgroup based firewalls]|
257 |KERNEL_SECURITY|boolean|false|`true`\|`false`|Enables Apparmor, integrity subsystem, auditing|
259 |KERNEL_SECURITY|boolean|false|`true`\|`false`|Enables Apparmor, integrity subsystem, auditing|
258 |KERNEL_BTRFS|boolean|false|`true`\|`false`|enable btrfs kernel support|
260 |KERNEL_BTRFS|boolean|false|`true`\|`false`|enable btrfs kernel support|
259 |KERNEL_POEHAT|boolean|false|`true`\|`false`|enable Enable RPI POE HAT fan kernel support|
261 |KERNEL_POEHAT|boolean|false|`true`\|`false`|enable Enable RPI POE HAT fan kernel support|
260 |KERNEL_NSPAWN|boolean|false|`true`\|`false`|Enable per-interface network priority control - for systemd-nspawn|
262 |KERNEL_NSPAWN|boolean|false|`true`\|`false`|Enable per-interface network priority control - for systemd-nspawn|
261 |KERNEL_DHKEY|boolean|true|`true`\|`false`|Diffie-Hellman operations on retained keys - required for >keyutils-1.6|
263 |KERNEL_DHKEY|boolean|true|`true`\|`false`|Diffie-Hellman operations on retained keys - required for >keyutils-1.6|
262
264
263 ---
265 ---
264
266
265 #### Reduce disk usage:
267 #### Reduce disk usage:
266 The following list of parameters is ignored if `ENABLE_REDUCE`=false.
268 The following list of parameters is ignored if `ENABLE_REDUCE`=false.
267
269
268 |Option|Value|default value|value format|desciption|
270 |Option|Value|default value|value format|desciption|
269 |---|---|---|---|---|
271 |---|---|---|---|---|
270 |ENABLE_REDUCE|boolean|false|`true`\|`false`|Reduce the disk space usage by deleting packages and files. See `REDUCE_*` parameters for detailed information|
272 |ENABLE_REDUCE|boolean|false|`true`\|`false`|Reduce the disk space usage by deleting packages and files. See `REDUCE_*` parameters for detailed information|
271 |REDUCE_APT|boolean|true|`true`\|`false`|Configure APT to use compressed package repository lists and no package caching files|
273 |REDUCE_APT|boolean|true|`true`\|`false`|Configure APT to use compressed package repository lists and no package caching files|
272 |REDUCE_DOC|boolean|false|`true`\|`false`|Remove all doc files (harsh). Configure APT to not include doc files on future `apt-get` package installations|
274 |REDUCE_DOC|boolean|false|`true`\|`false`|Remove all doc files (harsh). Configure APT to not include doc files on future `apt-get` package installations|
273 |REDUCE_MAN|boolean|false|`true`\|`false`|Remove all man pages and info files (harsh). Configure APT to not include man pages on future `apt-get` package installations|
275 |REDUCE_MAN|boolean|false|`true`\|`false`|Remove all man pages and info files (harsh). Configure APT to not include man pages on future `apt-get` package installations|
274 |REDUCE_VIM|boolean|false|`true`\|`false`|Replace `vim-tiny` package by `levee` a tiny vim clone|
276 |REDUCE_VIM|boolean|false|`true`\|`false`|Replace `vim-tiny` package by `levee` a tiny vim clone|
275 |REDUCE_BASH|boolean|false|`true`\|`false`|Remove `bash` package and switch to `dash` shell (experimental)|
277 |REDUCE_BASH|boolean|false|`true`\|`false`|Remove `bash` package and switch to `dash` shell (experimental)|
276 |REDUCE_HWDB|boolean|false|`true`\|`false`|Remove PCI related hwdb files (experimental)|
278 |REDUCE_HWDB|boolean|false|`true`\|`false`|Remove PCI related hwdb files (experimental)|
277 |REDUCE_SSHD|boolean|false|`true`\|`false`|Replace `openssh-server` with `dropbear`|
279 |REDUCE_SSHD|boolean|false|`true`\|`false`|Replace `openssh-server` with `dropbear`|
278 |REDUCE_LOCALE|boolean|false|`true`\|`false`|Remove all `locale` translation files|
280 |REDUCE_LOCALE|boolean|false|`true`\|`false`|Remove all `locale` translation files|
279 |REDUCE_KERNEL|boolean|false|`true`\|`false`|Reduce the size of the generated kernel by removing unwanted devices, network and filesystem drivers (experimental)|
281 |REDUCE_KERNEL|boolean|false|`true`\|`false`|Reduce the size of the generated kernel by removing unwanted devices, network and filesystem drivers (experimental)|
280 ---
282 ---
281
283
282 #### Encrypted root partition:
284 #### Encrypted root partition:
283 #### On first boot, you will be asked to enter you password several time
285 #### On first boot, you will be asked to enter you password several time
284 #### See cryptsetup options for a more information about opttion values(https://wiki.archlinux.org/index.php/Dm-crypt/Device_encryption)
286 #### See cryptsetup options for a more information about opttion values(https://wiki.archlinux.org/index.php/Dm-crypt/Device_encryption)
285
287
286 |Option|Value|default value|value format|desciption|
288 |Option|Value|default value|value format|desciption|
287 |---|---|---|---|---|
289 |---|---|---|---|---|
288 |ENABLE_CRYPTFS|boolean|false|`true`\|`false`|Enable full system encryption with dm-crypt. Setup a fully LUKS encrypted root partition (aes-xts-plain64:sha512) and generate required initramfs. The /boot directory will not be encrypted. This parameter will be ignored if `BUILD_KERNEL`=false. `ENABLE_CRYPTFS` is experimental|
290 |ENABLE_CRYPTFS|boolean|false|`true`\|`false`|Enable full system encryption with dm-crypt. Setup a fully LUKS encrypted root partition (aes-xts-plain64:sha512) and generate required initramfs. The /boot directory will not be encrypted. This parameter will be ignored if `BUILD_KERNEL`=false. `ENABLE_CRYPTFS` is experimental|
289 |CRYPTFS_PASSWORD|string||`YourPasswordToUnlockCrypto`|Set password of the encrypted root partition. This parameter is mandatory if `ENABLE_CRYPTFS`=true|
291 |CRYPTFS_PASSWORD|string||`YourPasswordToUnlockCrypto`|Set password of the encrypted root partition. This parameter is mandatory if `ENABLE_CRYPTFS`=true|
290 |CRYPTFS_MAPPING|string|secure|`YourDevMNapperName`|crypsetup device-mapper name|
292 |CRYPTFS_MAPPING|string|secure|`YourDevMNapperName`|crypsetup device-mapper name|
291 |CRYPTFS_CIPHER|string|aes-xts-plain64|`aes-cbc-essiv:sha256`|cryptsetup cipher `aes-xts*` ciphers are strongly recommended|
293 |CRYPTFS_CIPHER|string|aes-xts-plain64|`aes-cbc-essiv:sha256`|cryptsetup cipher `aes-xts*` ciphers are strongly recommended|
292 |CRYPTFS_HASH|string|sha256|`sha256`\|`sha512`|cryptsetup hash algorithm|
294 |CRYPTFS_HASH|string|sha256|`sha256`\|`sha512`|cryptsetup hash algorithm|
293 |CRYPTFS_XTSKEYSIZE|integer|256|`256`\|`512`||Sets key size in bits. The argument has to be a multiple of 8|
295 |CRYPTFS_XTSKEYSIZE|integer|256|`256`\|`512`||Sets key size in bits. The argument has to be a multiple of 8|
294 |CRYPTFS_DROPBEAR|boolean|false|`true`\|`false`|true=Enable Dropbear Initramfs support\|false=disable dropbear|
296 |CRYPTFS_DROPBEAR|boolean|false|`true`\|`false`|true=Enable Dropbear Initramfs support\|false=disable dropbear|
295 |CRYPTFS_DROPBEAR_PUBKEY|string||`PathToYourPublicDropbearKeyFile`|Full path to dropbear Public RSA-OpenSSH Key|
297 |CRYPTFS_DROPBEAR_PUBKEY|string||`PathToYourPublicDropbearKeyFile`|Full path to dropbear Public RSA-OpenSSH Key|
296
298
297 ---
299 ---
298
300
299 #### Build settings:
301 #### Build settings:
300 |Option|Value|default value|value format|desciption|
302 |Option|Value|default value|value format|desciption|
301 |---|---|---|---|---|
303 |---|---|---|---|---|
302 |BASEDIR|string||`FullPathToScriptRootDir`|If unset start from scriptroot or set to Full path to rpi123-gen-image directory|
304 |BASEDIR|string||`FullPathToScriptRootDir`|If unset start from scriptroot or set to Full path to rpi123-gen-image directory|
303 |IMAGE_NAME|string||`YourImageName`|if unset creates a name after this template: rpi`RPI_MODEL`-`RELEASE`-`RELEASE_ARCH`|
305 |IMAGE_NAME|string||`YourImageName`|if unset creates a name after this template: rpi`RPI_MODEL`-`RELEASE`-`RELEASE_ARCH`|
304
306
305 ---
307 ---
306
308
307 ## Understanding the script
309 ## Understanding the script
308 The functions of this script that are required for the different stages of the bootstrapping are split up into single files located inside the `bootstrap.d` directory. During the bootstrapping every script in this directory gets executed in lexicographical order:
310 The functions of this script that are required for the different stages of the bootstrapping are split up into single files located inside the `bootstrap.d` directory. During the bootstrapping every script in this directory gets executed in lexicographical order:
309
311
310 | Script | Description |
312 | Script | Description |
311 | --- | --- |
313 | --- | --- |
312 | `10-bootstrap.sh` | Debootstrap basic system |
314 | `10-bootstrap.sh` | Debootstrap basic system |
313 | `11-apt.sh` | Setup APT repositories |
315 | `11-apt.sh` | Setup APT repositories |
314 | `12-locale.sh` | Setup Locales and keyboard settings |
316 | `12-locale.sh` | Setup Locales and keyboard settings |
315 | `13-kernel.sh` | Build and install RPi 0/1/2/3 Kernel |
317 | `13-kernel.sh` | Build and install RPi 0/1/2/3 Kernel |
316 | `14-fstab.sh` | Setup fstab and initramfs |
318 | `14-fstab.sh` | Setup fstab and initramfs |
317 | `15-rpi-config.sh` | Setup RPi 0/1/2/3 config and cmdline |
319 | `15-rpi-config.sh` | Setup RPi 0/1/2/3 config and cmdline |
318 | `20-networking.sh` | Setup Networking |
320 | `20-networking.sh` | Setup Networking |
319 | `21-firewall.sh` | Setup Firewall |
321 | `21-firewall.sh` | Setup Firewall |
320 | `30-security.sh` | Setup Users and Security settings |
322 | `30-security.sh` | Setup Users and Security settings |
321 | `31-logging.sh` | Setup Logging |
323 | `31-logging.sh` | Setup Logging |
322 | `32-sshd.sh` | Setup SSH and public keys |
324 | `32-sshd.sh` | Setup SSH and public keys |
323 | `41-uboot.sh` | Build and Setup U-Boot |
325 | `41-uboot.sh` | Build and Setup U-Boot |
324 | `42-fbturbo.sh` | Build and Setup fbturbo Xorg driver |
326 | `42-fbturbo.sh` | Build and Setup fbturbo Xorg driver |
325 | `43-videocore.sh` | Build and Setup videocore libraries |
327 | `43-videocore.sh` | Build and Setup videocore libraries |
326 | `50-firstboot.sh` | First boot actions |
328 | `50-firstboot.sh` | First boot actions |
327 | `99-reduce.sh` | Reduce the disk space usage |
329 | `99-reduce.sh` | Reduce the disk space usage |
328
330
329 All the required configuration files that will be copied to the generated OS image are located inside the `files` directory. It is not recommended to modify these configuration files manually.
331 All the required configuration files that will be copied to the generated OS image are located inside the `files` directory. It is not recommended to modify these configuration files manually.
330
332
331 | Directory | Description |
333 | Directory | Description |
332 | --- | --- |
334 | --- | --- |
333 | `apt` | APT management configuration files |
335 | `apt` | APT management configuration files |
334 | `boot` | Boot and RPi 0/1/2/3 configuration files |
336 | `boot` | Boot and RPi 0/1/2/3 configuration files |
335 | `dpkg` | Package Manager configuration |
337 | `dpkg` | Package Manager configuration |
336 | `etc` | Configuration files and rc scripts |
338 | `etc` | Configuration files and rc scripts |
337 | `firstboot` | Scripts that get executed on first boot |
339 | `firstboot` | Scripts that get executed on first boot |
338 | `initramfs` | Initramfs scripts |
340 | `initramfs` | Initramfs scripts |
339 | `iptables` | Firewall configuration files |
341 | `iptables` | Firewall configuration files |
340 | `locales` | Locales configuration |
342 | `locales` | Locales configuration |
341 | `modules` | Kernel Modules configuration |
343 | `modules` | Kernel Modules configuration |
342 | `mount` | Fstab configuration |
344 | `mount` | Fstab configuration |
343 | `network` | Networking configuration files |
345 | `network` | Networking configuration files |
344 | `sysctl.d` | Swapping and Network Hardening configuration |
346 | `sysctl.d` | Swapping and Network Hardening configuration |
345 | `xorg` | fbturbo Xorg driver configuration |
347 | `xorg` | fbturbo Xorg driver configuration |
346
348
347 ## Custom packages and scripts
349 ## Custom packages and scripts
348 Debian custom packages, i.e. those not in the debian repositories, can be installed by placing them in the `packages` directory. They are installed immediately after packages from the repositories are installed. Any dependencies listed in the custom packages will be downloaded automatically from the repositories. Do not list these custom packages in `APT_INCLUDES`.
350 Debian custom packages, i.e. those not in the debian repositories, can be installed by placing them in the `packages` directory. They are installed immediately after packages from the repositories are installed. Any dependencies listed in the custom packages will be downloaded automatically from the repositories. Do not list these custom packages in `APT_INCLUDES`.
349
351
350 Scripts in the custom.d directory will be executed after all other installation is complete but before the image is created.
352 Scripts in the custom.d directory will be executed after all other installation is complete but before the image is created.
351
353
352 ## Logging of the bootstrapping process
354 ## Logging of the bootstrapping process
353 All information related to the bootstrapping process and the commands executed by the `rpi23-gen-image.sh` script can easily be saved into a logfile. The common shell command `script` can be used for this purpose:
355 All information related to the bootstrapping process and the commands executed by the `rpi23-gen-image.sh` script can easily be saved into a logfile. The common shell command `script` can be used for this purpose:
354
356
355 ```shell
357 ```shell
356 script -c 'APT_SERVER=ftp.de.debian.org ./rpi23-gen-image.sh' ./build.log
358 script -c 'APT_SERVER=ftp.de.debian.org ./rpi23-gen-image.sh' ./build.log
357 ```
359 ```
358
360
359 ## Flashing the image file
361 ## Flashing the image file
360 After the image file was successfully created by the `rpi23-gen-image.sh` script it can be copied to the microSD card that will be used by the RPi 0/1/2/3 computer. This can be performed by using the tools `bmaptool` or `dd`. Using `bmaptool` will probably speed-up the copy process because `bmaptool` copies more wisely than `dd`.
362 After the image file was successfully created by the `rpi23-gen-image.sh` script it can be copied to the microSD card that will be used by the RPi 0/1/2/3 computer. This can be performed by using the tools `bmaptool` or `dd`. Using `bmaptool` will probably speed-up the copy process because `bmaptool` copies more wisely than `dd`.
361
363
362 ##### Flashing examples:
364 ##### Flashing examples:
363 ```shell
365 ```shell
364 bmaptool copy ./images/buster/2017-01-23-rpi3-buster.img /dev/mmcblk0
366 bmaptool copy ./images/buster/2017-01-23-rpi3-buster.img /dev/mmcblk0
365 dd bs=4M if=./images/buster/2017-01-23-rpi3-buster.img of=/dev/mmcblk0
367 dd bs=4M if=./images/buster/2017-01-23-rpi3-buster.img of=/dev/mmcblk0
366 ```
368 ```
367 If you have set `ENABLE_SPLITFS`, copy the `-frmw` image on the microSD card, then the `-root` one on the USB drive:
369 If you have set `ENABLE_SPLITFS`, copy the `-frmw` image on the microSD card, then the `-root` one on the USB drive:
368 ```shell
370 ```shell
369 bmaptool copy ./images/buster/2017-01-23-rpi3-buster-frmw.img /dev/mmcblk0
371 bmaptool copy ./images/buster/2017-01-23-rpi3-buster-frmw.img /dev/mmcblk0
370 bmaptool copy ./images/buster/2017-01-23-rpi3-buster-root.img /dev/sdc
372 bmaptool copy ./images/buster/2017-01-23-rpi3-buster-root.img /dev/sdc
371 ```
373 ```
372
374
373 ## QEMU emulation
375 ## QEMU emulation
374 Start QEMU full system emulation:
376 Start QEMU full system emulation:
375 ```shell
377 ```shell
376 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=tty1"
378 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=tty1"
377 ```
379 ```
378
380
379 Start QEMU full system emulation and output to console:
381 Start QEMU full system emulation and output to console:
380 ```shell
382 ```shell
381 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
383 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
382 ```
384 ```
383
385
384 Start QEMU full system emulation with SMP and output to console:
386 Start QEMU full system emulation with SMP and output to console:
385 ```shell
387 ```shell
386 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -smp cpus=2,maxcpus=2 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
388 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -smp cpus=2,maxcpus=2 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
387 ```
389 ```
388
390
389 Start QEMU full system emulation with cryptfs, initramfs and output to console:
391 Start QEMU full system emulation with cryptfs, initramfs and output to console:
390 ```shell
392 ```shell
391 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -initrd "initramfs-${KERNEL_VERSION}" -append "root=/dev/mapper/secure cryptdevice=/dev/mmcblk0p2:secure rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
393 qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -initrd "initramfs-${KERNEL_VERSION}" -append "root=/dev/mapper/secure cryptdevice=/dev/mmcblk0p2:secure rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
392 ```
394 ```
393
395
394 ## External links and references
396 ## External links and references
395 * [Debian worldwide mirror sites](https://www.debian.org/mirror/list)
397 * [Debian worldwide mirror sites](https://www.debian.org/mirror/list)
396 * [Debian Raspberry Pi 2 Wiki](https://wiki.debian.org/RaspberryPi2)
398 * [Debian Raspberry Pi 2 Wiki](https://wiki.debian.org/RaspberryPi2)
397 * [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains)
399 * [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains)
398 * [Official Raspberry Pi Firmware on github](https://github.com/raspberrypi/firmware)
400 * [Official Raspberry Pi Firmware on github](https://github.com/raspberrypi/firmware)
399 * [Official Raspberry Pi Kernel on github](https://github.com/raspberrypi/linux)
401 * [Official Raspberry Pi Kernel on github](https://github.com/raspberrypi/linux)
400 * [U-BOOT git repository](https://git.denx.de/?p=u-boot.git;a=summary)
402 * [U-BOOT git repository](https://git.denx.de/?p=u-boot.git;a=summary)
401 * [Xorg DDX driver fbturbo](https://github.com/ssvb/xf86-video-fbturbo)
403 * [Xorg DDX driver fbturbo](https://github.com/ssvb/xf86-video-fbturbo)
402 * [RPi3 Wireless interface firmware](https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm)
404 * [RPi3 Wireless interface firmware](https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm)
403 * [Collabora RPi2 Kernel precompiled](https://repositories.collabora.co.uk/debian/)
405 * [Collabora RPi2 Kernel precompiled](https://repositories.collabora.co.uk/debian/)
Show file before | Show file after | Hide comments
@@ -1,4 +1,4
1 # Configuration template file used by rpi23-gen-image.sh
1 # Configuration template file used by rpi23-gen-image.sh
2 RPI_MODEL=2
2 RPI_MODEL=3
3 RELEASE=buster
3 RELEASE=jessie
4 BUILD_KERNEL=true
4 BUILD_KERNEL=true
General Comments 0
Vous devez vous connecter pour laisser un commentaire. Se connecter maintenant