Raspi2-3_GenImage Commit - r762:9c40b3f139b8 · Collaboration Tremplin des Sciences

Added choice to enable v3d graphics accelerator for Pi4...

vidal -

r762:9c40b3f139b8

parent child

Context file:

r762:9c40b3f139b8

README.md +1 0

              # rpi23-gen-image
              ## Introduction
              `rpi23-gen-image.sh` is an advanced Debian Linux bootstrapping shell script for generating Debian OS images for all Raspberry Pi computers. The script at this time supports the bootstrapping of the Debian (armhf/armel) releases `stretch` and `buster`. Raspberry Pi 0/1/2/3/4 images are generated for 32-bit mode only. Raspberry Pi 3 supports 64-bit images that can be generated using custom configuration parameters (```templates/rpi3-stretch-arm64-4.14.y```).
              ## Build dependencies
              The following list of Debian packages must be installed on the build system because they are essentially required for the bootstrapping process. The script will check if all required packages are installed and missing packages will be installed automatically if confirmed by the user.
                ```debootstrap debian-archive-keyring qemu-user-static binfmt-support dosfstools rsync bmap-tools whois git bc psmisc dbus sudo```
              It is recommended to configure the `rpi23-gen-image.sh` script to build and install the latest Raspberry Pi Linux kernel. For the Raspberry 3 this is mandatory. Kernel compilation and linking will be performed on the build system using an ARM (armhf/armel/aarch64) cross-compiler toolchain.
              The script has been tested using the default `crossbuild-essential-armhf` and `crossbuild-essential-armel` toolchain meta packages on Debian Linux `stretch` build systems. Please check the [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains) for further information.
              ## Command-line parameters
              The script accepts certain command-line parameters to enable or disable specific OS features, services and configuration settings. These parameters are passed to the `rpi23-gen-image.sh` script via (simple) shell-variables. Unlike environment shell-variables (simple) shell-variables are defined at the beginning of the command-line call of the `rpi23-gen-image.sh` script.
              ##### Command-line examples:
              ```shell
              ENABLE_UBOOT=true ./rpi23-gen-image.sh
              ENABLE_CONSOLE=false ENABLE_IPV6=false ./rpi23-gen-image.sh
              ENABLE_WM=xfce4 ENABLE_FBTURBO=true ENABLE_MINBASE=true ./rpi23-gen-image.sh
              ENABLE_HARDNET=true ENABLE_IPTABLES=true /rpi23-gen-image.sh
              APT_SERVER=ftp.de.debian.org APT_PROXY="http://127.0.0.1:3142/" ./rpi23-gen-image.sh
              ENABLE_MINBASE=true ./rpi23-gen-image.sh
              BUILD_KERNEL=true ENABLE_MINBASE=true ENABLE_IPV6=false ./rpi23-gen-image.sh
              BUILD_KERNEL=true KERNELSRC_DIR=/tmp/linux ./rpi23-gen-image.sh
              ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
              ENABLE_CRYPTFS=true CRYPTFS_PASSWORD=changeme EXPANDROOT=false ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
              RELEASE=buster BUILD_KERNEL=true ./rpi23-gen-image.sh
              RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
              RELEASE=buster RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
              ```
              ## Configuration template files
              To avoid long lists of command-line parameters and to help to store the favourite parameter configurations the `rpi23-gen-image.sh` script supports so called configuration template files (`CONFIG_TEMPLATE`=template). These are simple text files located in the `./templates` directory that contain the list of configuration parameters that will be used. New configuration template files can be added to the `./templates` directory.
              ##### Command-line examples:
              ```shell
              CONFIG_TEMPLATE=rpi3stretch ./rpi23-gen-image.sh
              CONFIG_TEMPLATE=rpi2stretch ./rpi23-gen-image.sh
              ```
              ## Working with the your template:
               * **A Pipe ("|") represents a logical OR**
               * **A valuetype of boolean represents the options true or false**
               * **Values without a default are required if you want do use that feature. It is possible that not every feature has a (working) sanity check.**
               * **If it's not working as expected, search your option in all the files in this repository (With e.g.grep or notepad++).**
               * **Check if your missing a required option while looking at the code**
              ## Supported parameters and settings
              #### APT settings:
              |Option|Value|default value|value format|desciption|
              |---|---|---|---|---|
              |APT_SERVER|string|ftp.debian.org|`URL`|Set Debian packages server address. Choose a server from the list of Debian worldwide [mirror sites](https://www.debian.org/mirror/list). Using a nearby server will probably speed-up all required downloads within the bootstrapping process.|
              |APT_PROXY|string||`URL`|Set Proxy server address. Using a local Proxy-Cache like `apt-cacher-ng` will speed-up the bootstrapping process because all required Debian packages will only be downloaded from the Debian mirror site once. If `apt-cacher-ng` is running on default `http://127.0.0.1:3142` it is autodetected and you don't need to set this.|
              |KEEP_APT_PROXY|boolean|false|`true`\|`false`|true=Keep the APT_PROXY settings used in the bootsrapping process in the generated image|
              |APT_INCLUDES|string list||`packageA`,`packageB`,...|A comma-separated list of additional packages to be installed by debootstrap during bootstrapping.|
              |APT_INCLUDES_LATE|string list||`packageA`,`packageB`,...|A comma-separated list of additional packages to be installed by apt after bootstrapping and after APT sources are set up.  This is useful for packages with pre-depends, which debootstrap do not handle well.|
              |APT_EXCLUDES|string list||`packageA`,`packageB`,...|A comma-separated list of packages to exclude. Use carefully|
              ---
              #### General system settings:
              |Option|Value|default value|value format|desciption|
              |---|---|---|---|---|
              |SET_ARCH|integer|32|`32`\|`64`|Set Architecture to default 32bit. If you want to compile 64-bit (RPI3/RPI3+/RPI4) set it to `64`. This option will set every needed cross-compiler or board specific option for a successful build.|
              |RPI_MODEL|string|3P|`0`\|`1`\|`1P`\|`2`\|`3`\|`3P`\|`4`|Set Architecture. This option will set most build options accordingly. Specify the target Raspberry Pi hardware model.|
              |RELEASE|string|buster|`jessie`\|`buster`\|`stretch`<br>\|`bullseye`\|`testing`\|`stable`<br>\|`oldstable`|Set the desired Debian release name. The script at this time supports the bootstrapping of the Debian releases `stretch` and `buster`.|
              |HOSTNAME|string|RPI_MODEL-RELEASE(e.g. RPI3-buster)|`SomeImageName.img`|Set system hostname. It's recommended that the hostname is unique in the corresponding subnet.|
              |DEFLOCAL|string|en_US.UTF-8|`Locale.Charset`|Set default system locale. This setting can also be changed inside the running OS using the `dpkg-reconfigure locales` command. Please note that on using this parameter the script will automatically install the required packages `locales`, `keyboard-configuration` and `console-setup`.|
              |TIMEZONE|string|Europe/Berlin|`Timezone`|Set default system timezone. All available timezones can be found in the `/usr/share/zoneinfo/` directory. This setting can also be changed inside the running OS using the `dpkg-reconfigure tzdata` command.|
              |EXPANDROOT|boolean|true|`true`\|`false`|true=Expand the root partition and filesystem automatically on first boot|
              ---
              #### User settings:
              |Option|Value|default value|desciption|
              |---|---|---|---|
              |ENABLE_ROOT|boolean|false|true=root login if ROOT_PASSWORD is set|
              |ROOT_PASSWORD|string|raspberry|Set password for `root` user. It's **STRONGLY** recommended that you choose a custom password.|
              |ENABLE_USER|boolean|true|true=Create non-root user with password `USER_PASSWORD` and username `USER_NAME`|
              |USER_NAME|string|pi|Set username for non-root user, if `ENABLE_USER` is true|
              |USER_PASSWORD|string|raspberry|Set password for non-root user, if `ENABLE_USER` is true. It's **STRONGLY** recommended that you choose a custom password.|
              ---
              #### Keyboard settings:
              These options are used to configure keyboard layout in `/etc/default/keyboard` for console and Xorg. These settings can also be changed inside the running OS using the `dpkg-reconfigure keyboard-configuration` command.
              |Option|Value|default value|value format|desciption|
              |---|---|---|---|---|
              |XKB_MODEL|string||`pc104`|Set the name of the model of your keyboard type|
              |XKB_LAYOUT|string||`us`|Set the supported keyboard layout(s)|
              |XKB_VARIANT|string||`basic`|Set the supported variant(s) of the keyboard layout(s)|
              |XKB_OPTIONS|string||`grp:alt_shift_toggle`|Set extra xkb configuration options|
              ---
              #### Networking settings:
              ethernet setting go to `/etc/systemd/network/eth0.network`.
              wifi settings go to `/etc/systemd/network/wlan0.network`.
              The default location of network configuration files in the Debian `stretch` release was changed to `/lib/systemd/network`.`
              |Option|Value|default value|desciption|
              |---|---|---|---|
              |ENABLE_IPV6|boolean|true|true=Enable IPv6 support via systemd-networkd|
              |ENABLE_WIRELESS|boolean|false|true=Download and install the [closed-source firmware binary blob](https://github.com/RPi-Distro/firmware-nonfree/raw/master/brcm) that is required to run the internal wireless interface of the Raspberry Pi model `3`. This parameter is ignored if the specified `RPI_MODEL` is not `0`,`3`,`3P`,`4`|
              |ENABLE_IPTABLES|boolean|false|true=Enable iptables IPv4/IPv6 firewall. Simplified ruleset: Allow all outgoing connections. Block all incoming connections except to OpenSSH service.|
              |ENABLE_HARDNET|boolean|false|true=Enable IPv4/IPv6 network stack hardening settings|
              |ENABLE_IFNAMES|boolean|true|true=creates complex and long interface names like e.g. encx8945924. Enable automatic assignment of predictable, stable network interface names for all NICs|
              ---
              #### Networking settings (DHCP):
              |Option|Value|default value|desciption|
              |---|---|---|---|
              |ENABLE_ETH_DHCP|boolean|true|Set the system to use DHCP on wired interface. This requires an DHCP server|
              |ENABLE_WIFI_DHCP|boolean|true|Set the system to use DHCP on wifi interface. This requires an DHCP server. Requires ENABLE_WIRELESS|
              ---
              #### Networking settings (ethernet static):
              The following static networking parameters are only supported if `ENABLE_ETH_DHCP` was set to `false`.
              |Option|Value|value format|desciption|
              |---|---|---|---|
              |NET_ETH_ADDRESS|string|`CIDR`|static IPv4 or IPv6 address and its prefix, separated by "/", eg. "192.169.0.3/24"|
              |NET_ETH_GATEWAY|string|`IP`|default gateway|
              |NET_ETH_DNS_1|string|`IP`|first DNS server|
              |NET_ETH_DNS_2|string|`IP`|second DNS server|
              |NET_ETH_DNS_DOMAINS|string|`example.local`|default DNS search domains to use for non fully qualified hostnames|
              |NET_ETH_NTP_1|string|`IP`|first NTP server|
              |NET_ETH_NTP_2|string|`IP`|second NTP server|
              ---
              #### Networking settings (WIFI):
              |Option|Value|value format|desciption|
              |---|---|---|---|
              |NET_WIFI_SSID|string|`yourwifiname`|WIFI SSID|
              |NET_WIFI_PSK|string|`yourwifikeytojoinnetwork`|WPA/WPA2 PSK|
              ---
              #### Networking settings (WIFI static):
              The following static networking parameters are only supported if `ENABLE_WIFI_DHCP` was set to `false`.
              |Option|Value|value format|desciption|
              |---|---|---|---|
              |NET_WIFI_ADDRESS|string|`CIDR`|static IPv4 or IPv6 address and its prefix, separated by "/", eg. "192.169.0.3/24"|
              |NET_WIFI_GATEWAY|string|`IP`|default gateway|
              |NET_WIFI_DNS_1|string|`IP`|first DNS server|
              |NET_WIFI_DNS_2|string|`IP`|second DNS server|
              |NET_WIFI_DNS_DOMAINS|string|`example.local`|default DNS search domains to use for non fully qualified hostnames|
              |NET_WIFI_NTP_1|string|`IP`|first NTP server|
              |NET_WIFI_NTP_2|string|`IP`|second NTP server|
              ---
              #### Basic system features:
              |Option|Value|default value|value format|desciption|
              |---|---|---|---|---|
              |ENABLE_CONSOLE|boolean|false|`true`\|`false`|true=Enable serial console interface.Recommended if no monitor or keyboard is connected to the RPi2/3. In case of problems fe. if the network (auto) configuration failed - the serial console can be used to access the system. On RPI `0` `3` `3P` the CPU speed is locked at lowest speed.|
              |ENABLE_PRINTK|boolean|false|`true`\|`false`|true=Enables printing kernel messages to konsole. printk is `3 4 1 3` as in raspbian|
              |ENABLE_BLUETOOTH|boolean|false|`true`\|`false`|true=Enable onboard Bluetooth interface on the RPi0/3/3P. See: [Configuring the GPIO serial port on Raspbian jessie and stretch](https://spellfoundry.com/2016/05/29/configuring-gpio-serial-port-raspbian-jessie-including-pi-3/)|
              |ENABLE_MINIUART_OVERLAY|boolean|false|`true`\|`false`|true=Enable Bluetooth to use this. Adds overlay to swap UART0 with UART1. Enabling (slower) Bluetooth and full speed serial console. - RPI `0` `3` `3P` have a fast `hardware UART0` (ttyAMA0) and a `mini UART1` (ttyS0)! RPI `1` `1P` `2` only have a `hardware UART0`. `UART0` is considered better, because is faster and more stable than `mini UART1`. By default the Bluetooth modem is mapped to the `hardware UART0` and `mini UART` is used for console. The `mini UART` is a problem for the serial console, because its baudrate depends on the CPU frequency, which is changing on runtime. Resulting in a volatile baudrate and thus in an unusable serial console.|
              |ENABLE_TURBO|boolean|false|`true`\|`false`|true=Enable Turbo mode. This setting locks cpu at the highest frequency. As setting ENABLE_CONSOLE=true locks RPI to lowest CPU speed, this is can be used additionally to lock cpu hat max speed. Need a good power supply and probably cooling for the Raspberry PI|
              |ENABLE_I2C|boolean|true|`true`\|`false`|true=Enable I2C interface on the RPi 0/1/2/3. Please check the [RPi 0/1/2/3 pinout diagrams](https://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins|
              |ENABLE_SPI|boolean|true|`true`\|`false`|true=Enable SPI interface on the RPi 0/1/2/3. Please check the [RPi 0/1/2/3 pinout diagrams](https://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins|
              |SSH_ENABLE|boolean|true|`true`\|`false`|Install and enable OpenSSH service. The default configuration of the service doesn't allow `root` to login. Please use the user `pi` instead and `su -` or `sudo` to execute commands as root|
              |ENABLE_NONFREE|boolean|false|`true`\|`false`|true=enable non-free\|false=disable non free. Edits /etc/apt/sources.list in your resulting image|
              |ENABLE_RSYSLOG|boolean|false|`true`\|`false`|true=keep rsyslog\|false=remove rsyslog. If rsyslog is removed (false), logs will be available only in journal files)|
              |ENABLE_SOUND|boolean|false|`true`\|`false`|true=Enable sound\|false=Disable sound|
              |ENABLE_HWRANDOM|boolean|true|`true`\|`false`|true=Enable Hardware Random Number Generator(RNG)\|false=Disable Hardware RNG\|Strong random numbers are important for most network-based communications that use encryption. It's recommended to be enabled|
              |ENABLE_MINGPU|boolean|false|`true`\|`false`|true=GPU 16MB RAM\|false=64MB RAM\|Minimize the amount of shared memory reserved for the GPU. It doesn't seem to be possible to fully disable the GPU. Also removes start.elf,fixup.dat,start_x.elf,fixup_x.dat form /boot|
              |ENABLE_XORG|boolean|false|`true`\|`false`|true=Install Xorg X Window System|\false=install no Xorg|
              |ENABLE_WM|string||`blackbox`, `openbox`, `fluxbox`,<br> `jwm`, `dwm`, `xfce4`, `awesome`|Install a user-defined window manager for the X Window System. To make sure all X related package dependencies are getting installed `ENABLE_XORG` will automatically set true if `ENABLE_WM` is used|
              |ENABLE_SYSVINIT|boolean|false|`true`\|`false`|true=Support for halt,init,poweroff,reboot,runlevel,shutdown,init commands\|false=use systemd commands|
              |ENABLE_SPLASH|boolean|true|`true`\|`false`|true=Enable default Raspberry Pi boot up rainbow splash screen|
              |ENABLE_LOGO|boolean|true|`true`\|`false`|true=Enable default Raspberry Pi console logo (image of four raspberries in the top left corner)|
              |ENABLE_SILENT_BOOT|boolean|false|`true`\|`false`|true=Set the verbosity of console messages shown during boot up to a strict minimum|
              |DISABLE_UNDERVOLT_WARNINGS|integer||`1`\|`2`|Unset to keep default behaviour. Setting the parameter to `1` will disable the warning overlay. Setting it to `2` will additionally allow RPi2/3 turbo mode when low-voltage is present|
              ---
              #### Advanced system features:
              |Option|Value|default value|value format|desciption|
              |---|---|---|---|---|
              |ENABLE_DPHYSSWAP|boolean|true|`true`\|`false`|Enable swap. The size of the swapfile is chosen relative to the size of the root partition. It'll use the `dphys-swapfile` package for that|
              |ENABLE_SYSTEMDSWAP|boolean|false|`true`\|`false`|Enables [Systemd-swap service](https://github.com/Nefelim4ag/systemd-swap). Usefull if `KERNEL_ZSWAP` is enabled|
              |ENABLE_QEMU|boolean|false|`true`\|`false`|Generate kernel (`vexpress_defconfig`), file system image (`qcow2`) and DTB files that can be used for QEMU full system emulation (`vexpress-A15`). The output files are stored in the `$(pwd)/images/qemu` directory. You can find more information about running the generated image in the QEMU section of this readme file|
              |QEMU_BINARY|string||`FullPathToQemuBinaryFile`|Sets the QEMU enviornment for the Debian archive. **Set by RPI_MODEL**|
              |ENABLE_KEYGEN|boolean|false|`true`\|`false`|Recover your lost codec license|
              |ENABLE_MINBASE|boolean|false|`true`\|`false`|Use debootstrap script variant `minbase` which only includes essential packages and apt. This will reduce the disk usage by about 65 MB|
              |ENABLE_SPLITFS|boolean|false|`true`\|`false`|Enable having root partition on an USB drive by creating two image files: one for the `/boot/firmware` mount point, and another for `/`|
              |ENABLE_INITRAMFS|boolean|false|`true`\|`false`|Create an initramfs that that will be loaded during the Linux startup process. `ENABLE_INITRAMFS` will automatically get enabled if `ENABLE_CRYPTFS`=true. This parameter will be ignored if `BUILD_KERNEL`=false|
              |ENABLE_DBUS|boolean|true|`true`\|`false`|Install and enable D-Bus message bus. Please note that systemd should work without D-bus but it's recommended to be enabled|
              |ENABLE_USBBOOT|boolean|false|`true`\|`false`|true=prepare image for usbboot. use with `ENABLE_SPLTFS`=true|
              |CHROOT_SCRIPTS|string||`FullPathToScriptFolder`|Full path to a directory with scripts that should be run in the chroot before the image is finally built. Every executable file in this directory is run in lexicographical order|
              |ENABLE_UBOOT|boolean|false|`true`\|`false`|Replace the default RPi 0/1/2/3 second stage bootloader (bootcode.bin) with [U-Boot bootloader](https://git.denx.de/?p=u-boot.git;a=summary). U-Boot can boot images via the network using the BOOTP/TFTP protocol. RPI4 needs tbd|
              |UBOOTSRC_DIR|string||`FullPathToUBootFolder`|Full path to a directory named `u-boot` of [U-Boot bootloader sources](https://git.denx.de/?p=u-boot.git;a=summary) that will be copied, configured, build and installed inside the chroot|
              |ENABLE_FBTURBO|boolean|false|`true`\|`false`|Install and enable the [hardware accelerated Xorg video driver](https://github.com/ssvb/xf86-video-fbturbo) `fbturbo`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling|
+             |ENABLE_GR_ACCEL|boolean|false|`true`\|`false`|Install and enable [one of the 3D graphics accelerators for Raspi4](https://www.raspberrypi.org/documentation/configuration/config-txt/video.md) `vc4-fkms-v3d`.  Not compatible with `fbturbo` mutually excluded and installed for Raspberry4 only|
              |FBTURBOSRC_DIR|string||`FullPathToFbTurboFolder`|Full path to a directory named `xf86-video-fbturbo` of [hardware accelerated Xorg video driver sources](https://github.com/ssvb/xf86-video-fbturbo) that will be copied, configured, build and installed inside the chroot|
              |ENABLE_VIDEOCORE|boolean|false|`true`\|`false`|Install and enable the [ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) `vcgencmd`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling|
              |VIDEOCORESRC_DIR|string||`FullPathToVideoSrcFolder`|Full path to a directory named `userland` of [ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) that will be copied, configured, build and installed inside the chroot|
              |ENABLE_NEXMON|boolean|false|`true`\|`false`|Install and enable the source code for a C-based firmware patching framework for Broadcom/Cypress WiFi chips that enables you to write your own firmware patches, for example, to enable monitor mode with radiotap headers and frame injection](https://github.com/seemoo-lab/nexmon.git)|
              |NEXMONSRC_DIR|string||`FullPathToNexmonFolder`|Full path to a directory named `nexmon` of [Source code for ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) that will be copied, configured, build and installed inside the chroot|
              ---
              #### SSH settings:
              |Option|Value|default value|value format|desciption|
              |---|---|---|---|---|
              |SSH_ENABLE_ROOT|boolean|false|`true`\|`false`|Enable password-based root login via SSH. This may be a security risk with the default password set, use only in trusted environments. `ENABLE_ROOT` must be set to `true`|
              |SSH_DISABLE_PASSWORD_AUTH|boolean|false|`true`\|`false`|Disable password-based SSH authentication. Only public key based SSH (v2) authentication will be supported|
              |SSH_LIMIT_USERS|boolean|false|`true`\|`false`|Limit the users that are allowed to login via SSH. Only allow user `USER_NAME`=pi and root if `SSH_ENABLE_ROOT`=true to login. This parameter will be ignored if `dropbear` SSH is used (`REDUCE_SSHD`=true)|
              |SSH_ROOT_PUB_KEY|string||`PathToYourROOT`<br>`RSAPublicKeyFile`|Full path to file. Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `root`. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported. `ENABLE_ROOT` **and** `SSH_ENABLE_ROOT` must be set to `true`|
              |SSH_USER_PUB_KEY|string||`PathToYourUSER`<br>`RSAPublicKeyFile`|Full path to file. Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `USER_NAME`=pi. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported|
              ---
              #### Kernel settings:
              |Option|Value|default value|value format|desciption|
              |---|---|---|---|---|
              |BUILD_KERNEL||true|`true`\|`false`|Build and install the latest RPi 0/1/2/3/4 Linux kernel. The default RPi 0/1/2/3/ kernel configuration is used most of the time. ENABLE_NEXMON - Changes Kernel Source to [https://github.com/Re4son/](Kali Linux Kernel) Precompiled 32bit kernel for RPI0/1/2/3 by [https://github.com/hypriot/](hypriot) Precompiled 64bit kernel for RPI3/4 by [https://github.com/sakaki-/](sakaki)|
              |CROSS_COMPILE|string|||This sets the cross-compile environment for the compiler. Set by RPI_MODEL|
              |KERNEL_ARCH|string|||This sets the kernel architecture for the compiler. Set by RPI_MODEL|
              |KERNEL_IMAGE|string|||Name of the image file in the boot partition. Set by RPI_MODEL|
              |KERNEL_BRANCH|string|||Name of the requested branch from the GIT location for the RPi Kernel. Default is using the current default branch from the GIT site|
              |KERNEL_DEFCONFIG|string|||Sets the default config for kernel compiling. Set by RPI_MODEL|
              |KERNEL_THREADS|integer|1|`1`\|`2`\|`3`\|...|Number of threads to build the kernel. If not set, the script will automatically determine the maximum number of CPU cores to speed up kernel compilation|
              |KERNEL_HEADERS|boolean|true|`true`\|`false`|Install kernel headers with the built kernel|
              |KERNEL_MENUCONFIG|boolean|false|`true`\|`false`|Start `make menuconfig` interactive menu-driven kernel configuration. The script will continue after `make menuconfig` was terminated|
              |KERNEL_OLDDEFCONFIG|boolean|false|`true`\|`false`|Run `make olddefconfig` to automatically set all new kernel configuration options to their recommended default values|
              |KERNEL_CCACHE|boolean|false|`true`\|`false`|Compile the kernel using ccache. This speeds up kernel recompilation by caching previous compilations and detecting when the same compilation is being done again|
              |KERNEL_REMOVESRC|boolean|true|`true`\|`false`|Remove all kernel sources from the generated OS image after it was built and installed|
              |KERNELSRC_DIR|string||`FullPathToKernelSrcDir`|Full path to a directory named `linux` of [RaspberryPi Linux kernel sources](https://github.com/raspberrypi/linux) that will be copied, configured, build and installed inside the chroot|
              |KERNELSRC_CLEAN|boolean|false|`true`\|`false`|Clean the existing kernel sources directory `KERNELSRC_DIR` (using `make mrproper`) after it was copied to the chroot and before the compilation of the kernel has started. This parameter will be ignored if no `KERNELSRC_DIR` was specified or if `KERNELSRC_PREBUILT`=true|
              |KERNELSRC_CONFIG|boolean|true|`true`\|`false`|true=enable custom kernel options. This parameter is automatically set to `true` if no existing kernel sources directory was specified using `KERNELSRC_DIR`. This parameter is ignored if `KERNELSRC_PREBUILT`=true|
              |KERNELSRC_USRCONFIG|string||`FullPathToUserKernel.config`|Copy own config file to kernel `.config`. If `KERNEL_MENUCONFIG`=true then running after copy|
              |KERNELSRC_PREBUILT|boolean|false|`true`\|`false`|With this parameter set to true the script expects the existing kernel sources directory to be already successfully cross-compiled. The parameters `KERNELSRC_CLEAN`, `KERNELSRC_CONFIG`, `KERNELSRC_USRCONFIG` and `KERNEL_MENUCONFIG` are ignored and no kernel compilation tasks are performed|
              |RPI_FIRMWARE_DIR|string||`FullPathToFolder`|Full path to a directory named `firmware`, containing a local copy of the firmware from the [RaspberryPi firmware project](https://github.com/raspberrypi/firmware). Default is to download the latest firmware directly from the project|
              |KERNEL_DEFAULT_GOV|string|ondemand|`performance`\|`powersave`<br>\|`userspace`\|`ondemand`<br>\|`conservative`\|`schedutil`|Set the default cpu governor at kernel compilation|
              |KERNEL_NF|boolean|false|`true`\|`false`|Enable Netfilter modules as kernel modules. You want that for iptables|
              |KERNEL_VIRT|boolean|false|`true`\|`false`|Enable Kernel KVM support (/dev/kvm)|
              |KERNEL_ZSWAP|boolean|false|`true`\|`false`|Enable Kernel Zswap support. Best use on high RAM load and mediocre CPU load usecases|
              |KERNEL_BPF|boolean|true|`true`\|`false`|Allow attaching eBPF programs to a cgroup using the bpf syscall (CONFIG_BPF_SYSCALL CONFIG_CGROUP_BPF) [systemd wants it - File /lib/systemd/system/systemd-journald.server:36 configures an IP firewall (IPAddressDeny=all), but the local system does not support BPF/cgroup based firewalls]|
              |KERNEL_SECURITY|boolean|false|`true`\|`false`|Enables Apparmor, integrity subsystem, auditing|
              |KERNEL_BTRFS|boolean|false|`true`\|`false`|enable btrfs kernel support|
              |KERNEL_POEHAT|boolean|false|`true`\|`false`|enable Enable RPI POE HAT fan kernel support|
              |KERNEL_NSPAWN|boolean|false|`true`\|`false`|Enable per-interface network priority control - for systemd-nspawn|
              |KERNEL_DHKEY|boolean|true|`true`\|`false`|Diffie-Hellman operations on retained keys - required for >keyutils-1.6|
              ---
              #### Reduce disk usage:
              The following list of parameters is ignored if `ENABLE_REDUCE`=false.
              |Option|Value|default value|value format|desciption|
              |---|---|---|---|---|
              |ENABLE_REDUCE|boolean|false|`true`\|`false`|Reduce the disk space usage by deleting packages and files. See `REDUCE_*` parameters for detailed information|
              |REDUCE_APT|boolean|true|`true`\|`false`|Configure APT to use compressed package repository lists and no package caching files|
              |REDUCE_DOC|boolean|false|`true`\|`false`|Remove all doc files (harsh). Configure APT to not include doc files on future `apt-get` package installations|
              |REDUCE_MAN|boolean|false|`true`\|`false`|Remove all man pages and info files (harsh).  Configure APT to not include man pages on future `apt-get` package installations|
              |REDUCE_VIM|boolean|false|`true`\|`false`|Replace `vim-tiny` package by `levee` a tiny vim clone|
              |REDUCE_BASH|boolean|false|`true`\|`false`|Remove `bash` package and switch to `dash` shell (experimental)|
              |REDUCE_HWDB|boolean|false|`true`\|`false`|Remove PCI related hwdb files (experimental)|
              |REDUCE_SSHD|boolean|false|`true`\|`false`|Replace `openssh-server` with `dropbear`|
              |REDUCE_LOCALE|boolean|false|`true`\|`false`|Remove all `locale` translation files|
              |REDUCE_KERNEL|boolean|false|`true`\|`false`|Reduce the size of the generated kernel by removing unwanted devices, network and filesystem drivers (experimental)|
              ---
              #### Encrypted root partition:
              #### On first boot, you will be asked to enter you password several time
              #### See cryptsetup options for a more information about opttion values(https://wiki.archlinux.org/index.php/Dm-crypt/Device_encryption)
              |Option|Value|default value|value format|desciption|
              |---|---|---|---|---|
              |ENABLE_CRYPTFS|boolean|false|`true`\|`false`|Enable full system encryption with dm-crypt. Setup a fully LUKS encrypted root partition (aes-xts-plain64:sha512) and generate required initramfs. The /boot directory will not be encrypted. This parameter will be ignored if `BUILD_KERNEL`=false. `ENABLE_CRYPTFS` is experimental|
              |CRYPTFS_PASSWORD|string||`YourPasswordToUnlockCrypto`|Set password of the encrypted root partition. This parameter is mandatory if `ENABLE_CRYPTFS`=true|
              |CRYPTFS_MAPPING|string|secure|`YourDevMNapperName`|crypsetup device-mapper name|
              |CRYPTFS_CIPHER|string|aes-xts-plain64|`aes-cbc-essiv:sha256`|cryptsetup cipher `aes-xts*` ciphers are strongly recommended|
              |CRYPTFS_HASH|string|sha256|`sha256`\|`sha512`|cryptsetup hash algorithm|
              |CRYPTFS_XTSKEYSIZE|integer|256|`256`\|`512`||Sets key size in bits. The argument has to be a multiple of 8|
              |CRYPTFS_DROPBEAR|boolean|false|`true`\|`false`|true=Enable Dropbear Initramfs support\|false=disable dropbear|
              |CRYPTFS_DROPBEAR_PUBKEY|string||`PathToYourPublicDropbearKeyFile`|Full path to dropbear Public RSA-OpenSSH Key|
              ---
              #### Build settings:
              |Option|Value|default value|value format|desciption|
              |---|---|---|---|---|
              |BASEDIR|string||`FullPathToScriptRootDir`|If unset start from scriptroot or set to Full path to rpi123-gen-image directory|
              |IMAGE_NAME|string||`YourImageName`|if unset creates a name after this template: rpi`RPI_MODEL`-`RELEASE`-`RELEASE_ARCH`|
              ---
              ## Understanding the script
              The functions of this script that are required for the different stages of the bootstrapping are split up into single files located inside the `bootstrap.d` directory. During the bootstrapping every script in this directory gets executed in lexicographical order:
              | Script | Description |
              | --- | --- |
              | `10-bootstrap.sh` | Debootstrap basic system |
              | `11-apt.sh` | Setup APT repositories |
              | `12-locale.sh` | Setup Locales and keyboard settings |
              | `13-kernel.sh` | Build and install RPi 0/1/2/3 Kernel |
              | `14-fstab.sh` | Setup fstab and initramfs |
              | `15-rpi-config.sh` | Setup RPi 0/1/2/3 config and cmdline |
              | `20-networking.sh` | Setup Networking |
              | `21-firewall.sh` | Setup Firewall |
              | `30-security.sh` | Setup Users and Security settings |
              | `31-logging.sh` | Setup Logging |
              | `32-sshd.sh` | Setup SSH and public keys |
              | `41-uboot.sh` | Build and Setup U-Boot |
              | `42-fbturbo.sh` | Build and Setup fbturbo Xorg driver |
              | `43-videocore.sh` | Build and Setup videocore libraries |
              | `50-firstboot.sh` | First boot actions |
              | `99-reduce.sh` | Reduce the disk space usage |
              All the required configuration files that will be copied to the generated OS image are located inside the `files` directory. It is not recommended to modify these configuration files manually.
              | Directory | Description |
              | --- | --- |
              | `apt` | APT management configuration files |
              | `boot` | Boot and RPi 0/1/2/3 configuration files |
              | `dpkg` | Package Manager configuration |
              | `etc` | Configuration files and rc scripts |
              | `firstboot` | Scripts that get executed on first boot  |
              | `initramfs` | Initramfs scripts |
              | `iptables` | Firewall configuration files |
              | `locales` | Locales configuration |
              | `modules` | Kernel Modules configuration |
              | `mount` | Fstab configuration |
              | `network` | Networking configuration files |
              | `sysctl.d` | Swapping and Network Hardening configuration |
              | `xorg` | fbturbo Xorg driver configuration |
              ## Custom packages and scripts
              Debian custom packages, i.e. those not in the debian repositories, can be installed by placing them in the `packages` directory. They are installed immediately after packages from the repositories are installed. Any dependencies listed in the custom packages will be downloaded automatically from the repositories. Do not list these custom packages in `APT_INCLUDES`.
              Scripts in the custom.d directory will be executed after all other installation is complete but before the image is created.
              ## Logging of the bootstrapping process
              All information related to the bootstrapping process and the commands executed by the `rpi23-gen-image.sh` script can easily be saved into a logfile. The common shell command `script` can be used for this purpose:
              ```shell
              script -c 'APT_SERVER=ftp.de.debian.org ./rpi23-gen-image.sh' ./build.log
              ```
              ## Flashing the image file
              After the image file was successfully created by the `rpi23-gen-image.sh` script it can be copied to the microSD card that will be used by the RPi 0/1/2/3 computer. This can be performed by using the tools `bmaptool` or `dd`. Using `bmaptool` will probably speed-up the copy process because `bmaptool` copies more wisely than `dd`.
              ##### Flashing examples:
              ```shell
              bmaptool copy ./images/buster/2017-01-23-rpi3-buster.img /dev/mmcblk0
              dd bs=4M if=./images/buster/2017-01-23-rpi3-buster.img of=/dev/mmcblk0
              ```
              If you have set `ENABLE_SPLITFS`, copy the `-frmw` image on the microSD card, then the `-root` one on the USB drive:
              ```shell
              bmaptool copy ./images/buster/2017-01-23-rpi3-buster-frmw.img /dev/mmcblk0
              bmaptool copy ./images/buster/2017-01-23-rpi3-buster-root.img /dev/sdc
              ```
              ## QEMU emulation
              Start QEMU full system emulation:
              ```shell
              qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=tty1"
              ```
              Start QEMU full system emulation and output to console:
              ```shell
              qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
              ```
              Start QEMU full system emulation with SMP and output to console:
              ```shell
              qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -smp cpus=2,maxcpus=2 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
              ```
              Start QEMU full system emulation with cryptfs, initramfs and output to console:
              ```shell
              qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -initrd "initramfs-${KERNEL_VERSION}" -append "root=/dev/mapper/secure cryptdevice=/dev/mmcblk0p2:secure rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
              ```
              ## External links and references
              * [Debian worldwide mirror sites](https://www.debian.org/mirror/list)
              * [Debian Raspberry Pi 2 Wiki](https://wiki.debian.org/RaspberryPi2)
              * [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains)
              * [Official Raspberry Pi Firmware on github](https://github.com/raspberrypi/firmware)
              * [Official Raspberry Pi Kernel on github](https://github.com/raspberrypi/linux)
              * [U-BOOT git repository](https://git.denx.de/?p=u-boot.git;a=summary)
              * [Xorg DDX driver fbturbo](https://github.com/ssvb/xf86-video-fbturbo)
              * [RPi3 Wireless interface firmware](https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm)
              * [Collabora RPi2 Kernel precompiled](https://repositories.collabora.co.uk/debian/)

bootstrap.d/15-rpi-config.sh +19 -1

              #
              # Setup RPi2/3/4 config and cmdline
              #
              # Load utility functions
              . ./functions.sh
              if [ -n "$RPI_FIRMWARE_DIR" ] && [ -d "$RPI_FIRMWARE_DIR" ] ; then
                # Install boot binaries from local directory
                cp "${RPI_FIRMWARE_DIR}"/boot/bootcode.bin "${BOOT_DIR}"/bootcode.bin
                cp "${RPI_FIRMWARE_DIR}"/boot/fixup.dat "${BOOT_DIR}"/fixup.dat
                cp "${RPI_FIRMWARE_DIR}"/boot/fixup_cd.dat "${BOOT_DIR}"/fixup_cd.dat
                cp "${RPI_FIRMWARE_DIR}"/boot/fixup_x.dat "${BOOT_DIR}"/fixup_x.dat
                cp "${RPI_FIRMWARE_DIR}"/boot/start.elf "${BOOT_DIR}"/start.elf
                cp "${RPI_FIRMWARE_DIR}"/boot/start_cd.elf "${BOOT_DIR}"/start_cd.elf
                cp "${RPI_FIRMWARE_DIR}"/boot/start_x.elf "${BOOT_DIR}"/start_x.elf
                cp "${RPI_FIRMWARE_DIR}"/boot/fixup4cd.dat "${BOOT_DIR}"/fixup4cd.dat
                cp "${RPI_FIRMWARE_DIR}"/boot/fixup4.dat "${BOOT_DIR}"/fixup4.dat
                cp "${RPI_FIRMWARE_DIR}"/boot/fixup4db.dat "${BOOT_DIR}"/fixup4db.dat
                cp "${RPI_FIRMWARE_DIR}"/boot/fixup4x.dat "${BOOT_DIR}"/fixup4x.dat
                cp "${RPI_FIRMWARE_DIR}"/boot/start4cd.elf "${BOOT_DIR}"/start4cd.elf
                cp "${RPI_FIRMWARE_DIR}"/boot/start4db.elf "${BOOT_DIR}"/start4db.elf
                cp "${RPI_FIRMWARE_DIR}"/boot/start4.elf "${BOOT_DIR}"/start4x.elf
                cp "${RPI_FIRMWARE_DIR}"/boot/start4x.elf "${BOOT_DIR}"/start4x.elf
              else
                # Create temporary directory for boot binaries
                temp_dir=$(as_nobody mktemp -d)
                # Install latest boot binaries from raspberry/firmware github
                as_nobody wget -q -O "${temp_dir}/bootcode.bin" "${FIRMWARE_URL}/bootcode.bin"
                as_nobody wget -q -O "${temp_dir}/fixup.dat" "${FIRMWARE_URL}/fixup.dat"
                as_nobody wget -q -O "${temp_dir}/fixup_cd.dat" "${FIRMWARE_URL}/fixup_cd.dat"
                as_nobody wget -q -O "${temp_dir}/fixup_x.dat" "${FIRMWARE_URL}/fixup_x.dat"
                as_nobody wget -q -O "${temp_dir}/start.elf" "${FIRMWARE_URL}/start.elf"
                as_nobody wget -q -O "${temp_dir}/start_cd.elf" "${FIRMWARE_URL}/start_cd.elf"
                as_nobody wget -q -O "${temp_dir}/start_x.elf" "${FIRMWARE_URL}/start_x.elf"
                as_nobody wget -q -O "${temp_dir}/fixup4cd.dat" "${FIRMWARE_URL}/fixup4cd.dat"
                as_nobody wget -q -O "${temp_dir}/fixup4.dat" "${FIRMWARE_URL}/fixup4.dat"
                as_nobody wget -q -O "${temp_dir}/fixup4db.dat" "${FIRMWARE_URL}/fixup4db.dat"
                as_nobody wget -q -O "${temp_dir}/fixup4x.dat" "${FIRMWARE_URL}/fixup4x.dat"
                as_nobody wget -q -O "${temp_dir}/start4cd.elf" "${FIRMWARE_URL}/start4cd.elf"
                as_nobody wget -q -O "${temp_dir}/start4db.elf" "${FIRMWARE_URL}/start4db.elf"
                as_nobody wget -q -O "${temp_dir}/start4x.elf" "${FIRMWARE_URL}/start4x.elf"
                as_nobody wget -q -O "${temp_dir}/start4x.elf" "${FIRMWARE_URL}/start4x.elf"
                # Move downloaded boot binaries
                mv "${temp_dir}/"* "${BOOT_DIR}/"
                # Remove temporary directory for boot binaries
                rm -fr "${temp_dir}"
                # Set permissions of the boot binaries
                chown -R root:root "${BOOT_DIR}"
                chmod -R 600 "${BOOT_DIR}"
              fi
              # Setup firmware boot cmdline
              if [ "$ENABLE_USBBOOT" = true ] ; then
                CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"
              else
                if [ "$ENABLE_SPLITFS" = true ] ; then
                  CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda1 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"
                else
                  CMDLINE="dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline console=tty1 rootwait init=/bin/systemd"
                fi
              fi
              # Add encrypted root partition to cmdline.txt
              if [ "$ENABLE_CRYPTFS" = true ] ; then
                if [ "$ENABLE_SPLITFS" = true ] ; then
                  CMDLINE=$(echo "${CMDLINE}" | sed "s/sda1/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda1:${CRYPTFS_MAPPING}/")
                else
                  if [ "$ENABLE_USBBOOT" = true ] ; then
                    CMDLINE=$(echo "${CMDLINE}" | sed "s/sda2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda2:${CRYPTFS_MAPPING}/")
                  else
                    CMDLINE=$(echo "${CMDLINE}" | sed "s/mmcblk0p2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/mmcblk0p2:${CRYPTFS_MAPPING}/")
                  fi
                fi
              fi
              # Enable Kernel messages on standard output
              if [ "$ENABLE_PRINTK" = true ] ; then
                install_readonly files/sysctl.d/83-rpi-printk.conf "${ETC_DIR}/sysctl.d/83-rpi-printk.conf"
              fi
              # Enable Kernel messages on standard output
              if [ "$KERNEL_SECURITY" = true ] ; then
                install_readonly files/sysctl.d/84-rpi-ASLR.conf "${ETC_DIR}/sysctl.d/84-rpi-ASLR.conf"
              fi
              # Install udev rule for serial alias - serial0 = console serial1=bluetooth
              install_readonly files/etc/99-com.rules "${LIB_DIR}/udev/rules.d/99-com.rules"
              # Remove IPv6 networking support
              if [ "$ENABLE_IPV6" = false ] ; then
                CMDLINE="${CMDLINE} ipv6.disable=1"
              fi
              # Automatically assign predictable network interface names
              if [ "$ENABLE_IFNAMES" = false ] ; then
                CMDLINE="${CMDLINE} net.ifnames=0"
              else
                CMDLINE="${CMDLINE} net.ifnames=1"
              fi
              # Disable Raspberry Pi console logo
              if [ "$ENABLE_LOGO" = false ] ; then
                CMDLINE="${CMDLINE} logo.nologo"
              fi
              # Strictly limit verbosity of boot up console messages
              if [ "$ENABLE_SILENT_BOOT" = true ] ; then
                CMDLINE="${CMDLINE} quiet loglevel=0 rd.systemd.show_status=auto rd.udev.log_priority=0"
              fi
              # Install firmware config
              install_readonly files/boot/config.txt "${BOOT_DIR}/config.txt"
              # Disable Raspberry Pi console logo
              if [ "$ENABLE_SPLASH" = false ] ; then
                echo "disable_splash=1" >> "${BOOT_DIR}/config.txt"
              fi
              # Locks CPU frequency at maximum
              if [ "$ENABLE_TURBO" = true ] ; then
                echo "force_turbo=1" >> "${BOOT_DIR}/config.txt"
                # helps to avoid sdcard corruption when force_turbo is enabled.
                echo "boot_delay=1" >> "${BOOT_DIR}/config.txt"
              fi
              if [ "$RPI_MODEL" = 0 ] || [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ] || [ "$RPI_MODEL" = 4 ]; then
                # Bluetooth enabled
                if [ "$ENABLE_BLUETOOTH" = true ] ; then
                  # Create temporary directory for Bluetooth sources
                  temp_dir=$(as_nobody mktemp -d)
                  # Fetch Bluetooth sources
                  as_nobody git -C "${temp_dir}" clone "${BLUETOOTH_URL}"
                  # Copy downloaded sources
                  mv "${temp_dir}/pi-bluetooth" "${R}/tmp/"
                  # Set permissions
                  chown -R root:root "${R}/tmp/pi-bluetooth"
                  # Bluetooth firmware from arch aur https://aur.archlinux.org/packages/pi-bluetooth/
                  wget -q -O "${R}/tmp/pi-bluetooth/LICENCE.broadcom_bcm43xx" https://aur.archlinux.org/cgit/aur.git/plain/LICENCE.broadcom_bcm43xx?h=pi-bluetooth
                  wget -q -O "${R}/tmp/pi-bluetooth/BCM43430A1.hcd" https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/master/broadcom/BCM43430A1.hcd
                  # Install tools
                  install_readonly "${R}/tmp/pi-bluetooth/usr/bin/btuart" "${R}/usr/bin/btuart"
                  install_readonly "${R}/tmp/pi-bluetooth/usr/bin/bthelper" "${R}/usr/bin/bthelper"
              	# make scripts executable
              	chmod +x "${R}/usr/bin/bthelper"
              	chmod +x "${R}/usr/bin/btuart"
                  # Install bluetooth udev rule
                  install_readonly "${R}/tmp/pi-bluetooth/lib/udev/rules.d/90-pi-bluetooth.rules" "${LIB_DIR}/udev/rules.d/90-pi-bluetooth.rules"
                  # Install Firmware Flash file and apropiate licence
                  mkdir -p "$BLUETOOTH_FIRMWARE_DIR"
                  install_readonly "${R}/tmp/pi-bluetooth/LICENCE.broadcom_bcm43xx" "${BLUETOOTH_FIRMWARE_DIR}/LICENCE.broadcom_bcm43xx"
                  install_readonly "${R}/tmp/pi-bluetooth/BCM43430A1.hcd" "${BLUETOOTH_FIRMWARE_DIR}/BCM43430A1.hcd"
                  install_readonly "${R}/tmp/pi-bluetooth/debian/pi-bluetooth.bthelper@.service" "${ETC_DIR}/systemd/system/pi-bluetooth.bthelper@.service"
                  install_readonly "${R}/tmp/pi-bluetooth/debian/pi-bluetooth.hciuart.service" "${ETC_DIR}/systemd/system/pi-bluetooth.hciuart.service"
                  # Remove temporary directories
                  rm -fr "${temp_dir}"
              	rm -fr "${R}"/tmp/pi-bluetooth
                  # Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 & 15. Slow Bluetooth and slow cpu. Use /dev/ttyS0 instead of /dev/ttyAMA0
                  if [ "$ENABLE_MINIUART_OVERLAY" = true ] ; then
              	  # set overlay to swap ttyAMA0 and ttyS0
                    echo "dtoverlay=pi3-miniuart-bt" >> "${BOOT_DIR}/config.txt"
              	  if [ "$ENABLE_TURBO" = false ] ; then
                      echo "core_freq=250" >> "${BOOT_DIR}/config.txt"
                    fi
              	fi
              	# Activate services
              	chroot_exec systemctl enable pi-bluetooth.hciuart.service
                else # if ENABLE_BLUETOOTH = false
                	# set overlay to disable bluetooth
                  echo "dtoverlay=pi3-disable-bt" >> "${BOOT_DIR}/config.txt"
                fi # ENABLE_BLUETOOTH end
              fi
              # may need sudo systemctl disable hciuart
              if [ "$ENABLE_CONSOLE" = true ] ; then
                echo "enable_uart=1"  >> "${BOOT_DIR}/config.txt"
                #More debug output on early but with serial console
                echo "uart_2ndstage=1"  >> "${BOOT_DIR}/config.txt"
                # add string to cmdline
                CMDLINE="${CMDLINE} console=serial0,115200"
                if [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ]|| [ "$RPI_MODEL" = 0 ]; then
                  # if force_turbo didn't lock cpu at high speed, lock it at low speed (XOR logic) or miniuart will be broken
                  if [ "$ENABLE_TURBO" = false ] ; then
                    echo "core_freq=250" >> "${BOOT_DIR}/config.txt"
                  fi
                fi
                # Enable serial console systemd style
                chroot_exec systemctl enable serial-getty@serial0.service
              else
                echo "enable_uart=0"  >> "${BOOT_DIR}/config.txt"
              fi
              # Disable dphys-swapfile service. Will get enabled on first boot
              if [ "$ENABLE_DPHYSSWAP" = true ] ; then
                chroot_exec systemctl disable dphys-swapfile
              fi
              if [ "$ENABLE_SYSTEMDSWAP" = true ] ; then
                # Create temporary directory for systemd-swap sources
                temp_dir=$(as_nobody mktemp -d)
                # Fetch systemd-swap sources
                as_nobody git -C "${temp_dir}" clone "${SYSTEMDSWAP_URL}"
                # Copy downloaded systemd-swap sources
                mv "${temp_dir}/systemd-swap" "${R}/tmp/"
                # Change into downloaded src dir
                cd "${R}/tmp/systemd-swap" || exit
                # Get Verion
                VERSION=$(git tag | tail -n 1)
                #sed -i "s/DEB_NAME=.*/DEB_NAME=systemd-swap_all/g" "${R}/tmp/systemd-swap/package.sh"
                # Build package
                bash ./package.sh debian
                # Change back into script root dir
                cd "${WORKDIR}" || exit
                # Set permissions of the systemd-swap sources
                chown -R root:root "${R}/tmp/systemd-swap"
                # Install package - IMPROVE AND MAKE IT POSSIBLE WITHOUT VERSION NR.
                chroot_exec dpkg -i /tmp/systemd-swap/systemd-swap_"$VERSION"_all.deb
                # Enable service
                chroot_exec systemctl enable systemd-swap
                # Remove temporary directory for systemd-swap sources
                rm -fr "${temp_dir}"
              else
                # Enable ZSWAP in cmdline if systemd-swap is not used
                if [ "$KERNEL_ZSWAP" = true ] ; then
                  CMDLINE="${CMDLINE} zswap.enabled=1 zswap.max_pool_percent=25 zswap.compressor=lz4"
                fi
              fi
                if [ "$KERNEL_SECURITY" = true ] ; then
                  CMDLINE="${CMDLINE} apparmor=1 security=apparmor"
                fi
              # Install firmware boot cmdline
              echo "${CMDLINE}" > "${BOOT_DIR}/cmdline.txt"
              # Setup minimal GPU memory allocation size: 16MB (no X)
              if [ "$ENABLE_MINGPU" = true ] ; then
-               echo "gpu_mem=16" >> "${BOOT_DIR}/config.txt"
+               if [ "$ENABLE_GR_ACCEL" = false ]  ; then
+                 echo "gpu_mem=16" >> "${BOOT_DIR}/config.txt"
+               else
+                 ### Cannot reduce memory if graphics acceleration is requested
+                 echo "gpu_mem=128" >> "${BOOT_DIR}/config.txt"
+               fi
              fi
              # Setup boot with initramfs
              if [ "$ENABLE_INITRAMFS" = true ] ; then
                echo "initramfs initramfs-${KERNEL_VERSION} followkernel" >> "${BOOT_DIR}/config.txt"
              fi
              # Create firmware configuration and cmdline symlinks
              ln -sf firmware/config.txt "${R}/boot/config.txt"
              ln -sf firmware/cmdline.txt "${R}/boot/cmdline.txt"
              # Install and setup kernel modules to load at boot
              mkdir -p "${LIB_DIR}/modules-load.d/"
              install_readonly files/modules/rpi2.conf "${LIB_DIR}/modules-load.d/rpi2.conf"
              # Load hardware random module at boot
              if [ "$ENABLE_HWRANDOM" = true ] && [ "$BUILD_KERNEL" = false ] ; then
                sed -i "s/^# bcm2708_rng/bcm2708_rng/" "${LIB_DIR}/modules-load.d/rpi2.conf"
              fi
              # Load sound module at boot
              if [ "$ENABLE_SOUND" = true ] ; then
                sed -i "s/^# snd_bcm2835/snd_bcm2835/" "${LIB_DIR}/modules-load.d/rpi2.conf"
              else
                echo "dtparam=audio=off" >> "${BOOT_DIR}/config.txt"
              fi
              # Enable I2C interface
              if [ "$ENABLE_I2C" = true ] ; then
                echo "dtparam=i2c_arm=on" >> "${BOOT_DIR}/config.txt"
                sed -i "s/^# i2c-bcm2708/i2c-bcm2708/" "${LIB_DIR}/modules-load.d/rpi2.conf"
                sed -i "s/^# i2c-dev/i2c-dev/" "${LIB_DIR}/modules-load.d/rpi2.conf"
              fi
              # Enable SPI interface
              if [ "$ENABLE_SPI" = true ] ; then
                echo "dtparam=spi=on" >> "${BOOT_DIR}/config.txt"
                echo "spi-bcm2708" >> "${LIB_DIR}/modules-load.d/rpi2.conf"
                if [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ]; then
                  sed -i "s/spi-bcm2708/spi-bcm2835/" "${LIB_DIR}/modules-load.d/rpi2.conf"
                fi
              fi
              # Disable RPi2/3 under-voltage warnings
              if [ -n "$DISABLE_UNDERVOLT_WARNINGS" ] ; then
                echo "avoid_warnings=${DISABLE_UNDERVOLT_WARNINGS}" >> "${BOOT_DIR}/config.txt"
              fi
+             #Enable graphics acceleration for Model 4
+             if [ "$RPI_MODEL" = 4 ] && [ "$ENABLE_GR_ACCEL" = true ] ; then
+               echo "max_framebuffers=2" >> "${BOOT_DIR}/config.txt"
+               echo "arm_64bit=1" >> "${BOOT_DIR}/config.txt"
+               echo "cmdline=cmdline.txt" >> "${BOOT_DIR}/config.txt"
+               echo "dtparam=audio=on" >> "${BOOT_DIR}/config.txt"
+               if [ "$ENABLE_MINGPU" = false ] ; then
+                 echo "gpu_mem=128" >> "${BOOT_DIR}/config.txt"
+               fi
+               echo "dtoverlay=vc4-fkms-v3d, cma-128" >> "${BOOT_DIR}/config.txt"
+             fi
              # Install kernel modules blacklist
              mkdir -p "${ETC_DIR}/modprobe.d/"
              install_readonly files/modules/raspi-blacklist.conf "${ETC_DIR}/modprobe.d/raspi-blacklist.conf"
              # Install sysctl.d configuration files
              install_readonly files/sysctl.d/81-rpi-vm.conf "${ETC_DIR}/sysctl.d/81-rpi-vm.conf"

bootstrap.d/42-fbturbo.sh +1 -1

              #
              # Build and Setup fbturbo Xorg driver
              #
              # Load utility functions
              . ./functions.sh
-             if [ "$ENABLE_FBTURBO" = true ] ; then
+             if [ "$ENABLE_FBTURBO" = true ] && [ "$ENABLE_GR_ACCEL" = false ] ; then
                # Install c/c++ build environment inside the chroot
                chroot_install_cc
                # Copy existing fbturbo sources into chroot directory
                if [ -n "$FBTURBOSRC_DIR" ] && [ -d "$FBTURBOSRC_DIR" ] ; then
                  # Copy local fbturbo sources
                  cp -r "${FBTURBOSRC_DIR}" "${R}/tmp"
                else
                  # Create temporary directory for fbturbo sources
                  temp_dir=$(as_nobody mktemp -d)
                  # Fetch fbturbo sources
                  as_nobody git -C "${temp_dir}" clone "${FBTURBO_URL}"
                  # Move downloaded fbturbo sources
                  mv "${temp_dir}/xf86-video-fbturbo" "${R}/tmp/"
                  # Remove temporary directory for fbturbo sources
                  rm -fr "${temp_dir}"
                fi
                # Install Xorg build dependencies
                chroot_exec apt-get -q -y --no-install-recommends --allow-unauthenticated install xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev
                # Build and install fbturbo driver inside chroot
                chroot_exec /bin/bash -x <<'EOF'
              cd /tmp/xf86-video-fbturbo
              autoreconf -vi
              ./configure --prefix=/usr
              make
              make install
              EOF
                # Install fbturbo driver Xorg configuration
                install_readonly files/xorg/99-fbturbo.conf "${R}/usr/share/X11/xorg.conf.d/99-fbturbo.conf"
                # Remove Xorg build dependencies
                chroot_exec apt-get -qq -y --auto-remove purge xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev
              fi

rpi23-gen-image.sh +1 0

              #!/bin/sh
              ########################################################################
              # rpi23-gen-image.sh					       2015-2017
              #
              # Advanced Debian "stretch" and "buster" bootstrap script for Raspberry Pi
              #
              # This program is free software; you can redistribute it and/or
              # modify it under the terms of the GNU General Public License
              # as published by the Free Software Foundation; either version 2
              # of the License, or (at your option) any later version.
              #
              # Copyright (C) 2015 Jan Wagner <mail@jwagner.eu>
              #
              # Big thanks for patches and enhancements by 20+ github contributors!
              ########################################################################
              # Are we running as root?
              if [ "$(id -u)" -ne "0" ] ; then
                echo "error: this script must be executed with root privileges!"
                exit 1
              fi
              # Check if ./functions.sh script exists
              if [ ! -r "./functions.sh" ] ; then
                echo "error: './functions.sh' required script not found!"
                exit 1
              fi
              # Load utility functions
              . ./functions.sh
              # Load parameters from configuration template file
              if [ -n "$CONFIG_TEMPLATE" ] ; then
                use_template
              fi
              # Introduce settings
              set -e
              echo -n -e "\n#\n# RPi 0/1/2/3/4 Bootstrap Settings\n#\n"
              set -x
              # Raspberry Pi model configuration
              RPI_MODEL=${RPI_MODEL:=3P}
              # Debian release
              RELEASE=${RELEASE:=buster}
              if [ $RELEASE = "bullseye" ] ; then
               RELEASE=testing
              fi
              # Kernel Branch
              KERNEL_BRANCH=${KERNEL_BRANCH:=""}
              # URLs
              KERNEL_URL=${KERNEL_URL:=https://github.com/raspberrypi/linux}
              FIRMWARE_URL=${FIRMWARE_URL:=https://github.com/raspberrypi/firmware/raw/master/boot}
              WLAN_FIRMWARE_URL=${WLAN_FIRMWARE_URL:=https://github.com/RPi-Distro/firmware-nonfree/raw/master/brcm}
              FBTURBO_URL=${FBTURBO_URL:=https://github.com/ssvb/xf86-video-fbturbo.git}
              UBOOT_URL=${UBOOT_URL:=https://git.denx.de/u-boot.git}
              VIDEOCORE_URL=${VIDEOCORE_URL:=https://github.com/raspberrypi/userland}
              BLUETOOTH_URL=${BLUETOOTH_URL:=https://github.com/RPi-Distro/pi-bluetooth.git}
              NEXMON_URL=${NEXMON_URL:=https://github.com/seemoo-lab/nexmon.git}
              SYSTEMDSWAP_URL=${SYSTEMDSWAP_URL:=https://github.com/Nefelim4ag/systemd-swap.git}
              # Kernel deb packages for 32bit kernel
              RPI_32_KERNEL_URL=${RPI_32_KERNEL_URL:=https://github.com/hypriot/rpi-kernel/releases/download/v4.14.34/raspberrypi-kernel_20180422-141901_armhf.deb}
              RPI_32_KERNELHEADER_URL=${RPI_32_KERNELHEADER_URL:=https://github.com/hypriot/rpi-kernel/releases/download/v4.14.34/raspberrypi-kernel-headers_20180422-141901_armhf.deb}
              # Kernel has KVM and zswap enabled - use if KERNEL_* parameters and precompiled kernel are used
              RPI3_64_BIS_KERNEL_URL=${RPI3_64_BIS_KERNEL_URL:=https://github.com/sakaki-/bcmrpi3-kernel-bis/releases/download/4.19.102.20200211/bcmrpi3-kernel-bis-4.19.102.20200211.tar.xz}
              # Default precompiled 64bit kernel
              RPI3_64_DEF_KERNEL_URL=${RPI3_64_DEF_KERNEL_URL:=https://github.com/sakaki-/bcmrpi3-kernel/releases/download/4.19.102.20200211/bcmrpi3-kernel-4.19.102.20200211.tar.xz}
              # Sakaki BIS Kernel RPI4 - https://github.com/sakaki-/bcm2711-kernel-bis
              RPI4_64_BIS_KERNEL_URL=${RPI4_64_BIS_KERNEL_URL:=https://github.com/sakaki-/bcm2711-kernel-bis/releases/download/4.19.102.20200211/bcm2711-kernel-bis-4.19.102.20200211.tar.xz}
              # Default precompiled 64bit kernel - https://github.com/sakaki-/bcm2711-kernel
              RPI4_64_DEF_KERNEL_URL=${RPI4_64_DEF_KERNEL_URL:=https://github.com/sakaki-/bcm2711-kernel-bis/releases/download/4.19.102.20200211/bcm2711-kernel-bis-4.19.102.20200211.tar.xz}
              # Generic
              RPI3_64_KERNEL_URL=${RPI3_64_KERNEL_URL:=$RPI3_64_DEF_KERNEL_URL}
              RPI4_64_KERNEL_URL=${RPI4_64_KERNEL_URL:=$RPI4_64_DEF_KERNEL_URL}
              # Kali kernel src - used if ENABLE_NEXMON=true (they patch the wlan kernel modul)
              KALI_KERNEL_URL=${KALI_KERNEL_URL:=https://github.com/Re4son/re4son-raspberrypi-linux.git}
              # Build directories
              WORKDIR=$(pwd)
              BASEDIR=${BASEDIR:=${WORKDIR}/images/${RELEASE}}
              BUILDDIR="${BASEDIR}/build"
              # Chroot directories
              R="${BUILDDIR}/chroot"
              ETC_DIR="${R}/etc"
              LIB_DIR="${R}/lib"
              BOOT_DIR="${R}/boot/firmware"
              KERNEL_DIR="${R}/usr/src/linux"
              WLAN_FIRMWARE_DIR="${LIB_DIR}/firmware/brcm"
              BLUETOOTH_FIRMWARE_DIR="${ETC_DIR}/firmware/bt"
              # APT settings
              APT_SERVER=${APT_SERVER:="ftp.debian.org"}
              APT_PROXY=${APT_PROXY:=""}
              KEEP_APT_PROXY=${KEEP_APT_PROXY:=false}
              # Packages required in the chroot build environment
              APT_INCLUDES=${APT_INCLUDES:=""}
              APT_INCLUDES="${APT_INCLUDES},apt-transport-https,apt-utils,ca-certificates,debian-archive-keyring,dialog,sudo,systemd,sysvinit-utils,locales,keyboard-configuration,console-setup,libnss-systemd"
              # Packages to exclude from chroot build environment
              APT_EXCLUDES=${APT_EXCLUDES:=""}
              # General settings
              SET_ARCH=${SET_ARCH:=32}
              HOSTNAME=${HOSTNAME:=rpi${RPI_MODEL}-${RELEASE}}
              DEFLOCAL=${DEFLOCAL:="en_US.UTF-8"}
              TIMEZONE=${TIMEZONE:="Europe/Berlin"}
              EXPANDROOT=${EXPANDROOT:=true}
              ENABLE_ROOT=${ENABLE_ROOT:=false}
              ROOT_PASSWORD=${ROOT_PASSWORD:=raspberry}
              ENABLE_USER=${ENABLE_USER:=true}
              USER_NAME=${USER_NAME:="pi"}
              USER_PASSWORD=${USER_PASSWORD:=raspberry}
              # Keyboard settings
              XKB_MODEL=${XKB_MODEL:=""}
              XKB_LAYOUT=${XKB_LAYOUT:=""}
              XKB_VARIANT=${XKB_VARIANT:=""}
              XKB_OPTIONS=${XKB_OPTIONS:=""}
              # Networking settings:
              ENABLE_IPV6=${ENABLE_IPV6:=true}
              ENABLE_WIRELESS=${ENABLE_WIRELESS:=false}
              ENABLE_IPTABLES=${ENABLE_IPTABLES:=false}
              ENABLE_HARDNET=${ENABLE_HARDNET:=false}
              ENABLE_IFNAMES=${ENABLE_IFNAMES:=true}
              # Network settings (DHCP)
              ENABLE_ETH_DHCP=${ENABLE_ETH_DHCP:=true}
              ENABLE_WIFI_DHCP=${ENABLE_ETH_DHCP:=true}
              # Network settings (static)
              NET_ETH_ADDRESS=${NET_ETH_ADDRESS:=""}
              NET_ETH_GATEWAY=${NET_ETH_GATEWAY:=""}
              NET_ETH_DNS_1=${NET_ETH_DNS_1:=""}
              NET_ETH_DNS_2=${NET_ETH_DNS_2:=""}
              NET_ETH_DNS_DOMAINS=${NET_ETH_DNS_DOMAINS:=""}
              NET_ETH_NTP_1=${NET_ETH_NTP_1:=""}
              NET_ETH_NTP_2=${NET_ETH_NTP_2:=""}
              # Networking settings (WIFI):
              NET_WIFI_SSID=${NET_WIFI_SSID:=""}
              NET_WIFI_PSK=${NET_WIFI_PSK:=""}
              # Network settings (static)
              NET_WIFI_ADDRESS=${NET_WIFI_ADDRESS:=""}
              NET_WIFI_GATEWAY=${NET_WIFI_GATEWAY:=""}
              NET_WIFI_DNS_1=${NET_WIFI_DNS_1:=""}
              NET_WIFI_DNS_2=${NET_WIFI_DNS_2:=""}
              NET_WIFI_DNS_DOMAINS=${NET_WIFI_DNS_DOMAINS:=""}
              NET_WIFI_NTP_1=${NET_WIFI_NTP_1:=""}
              NET_WIFI_NTP_2=${NET_WIFI_NTP_2:=""}
              # Feature settings
              ENABLE_CONSOLE=${ENABLE_CONSOLE:=false}
              ENABLE_PRINTK=${ENABLE_PRINTK:=false}
              ENABLE_BLUETOOTH=${ENABLE_BLUETOOTH:=false}
              ENABLE_MINIUART_OVERLAY=${ENABLE_MINIUART_OVERLAY:=false}
              ENABLE_TURBO=${ENABLE_TURBO:=false}
              ENABLE_I2C=${ENABLE_I2C:=false}
              ENABLE_SPI=${ENABLE_SPI:=false}
              ENABLE_NONFREE=${ENABLE_NONFREE:=false}
              ENABLE_RSYSLOG=${ENABLE_RSYSLOG:=true}
              ENABLE_SOUND=${ENABLE_SOUND:=false}
              ENABLE_HWRANDOM=${ENABLE_HWRANDOM:=true}
              ENABLE_MINGPU=${ENABLE_MINGPU:=false}
              ENABLE_XORG=${ENABLE_XORG:=false}
              ENABLE_WM=${ENABLE_WM:=""}
              ENABLE_SYSVINIT=${ENABLE_SYSVINIT:=false}
              ENABLE_SPLASH=${ENABLE_SPLASH:=true}
              ENABLE_LOGO=${ENABLE_LOGO:=true}
              ENABLE_SILENT_BOOT=${ENABLE_SILENT_BOOT=false}
              DISABLE_UNDERVOLT_WARNINGS=${DISABLE_UNDERVOLT_WARNINGS:=}
              # Advanced settings
              ENABLE_DPHYSSWAP=${ENABLE_DPHYSSWAP:=true}
              ENABLE_SYSTEMDSWAP=${ENABLE_SYSTEMDSWAP:=false}
              ENABLE_QEMU=${ENABLE_QEMU:=false}
              ENABLE_KEYGEN=${ENABLE_KEYGEN:=false}
              ENABLE_MINBASE=${ENABLE_MINBASE:=false}
              ENABLE_SPLITFS=${ENABLE_SPLITFS:=false}
              ENABLE_INITRAMFS=${ENABLE_INITRAMFS:=false}
              ENABLE_DBUS=${ENABLE_DBUS:=true}
              ENABLE_USBBOOT=${ENABLE_USBBOOT=false}
              CHROOT_SCRIPTS=${CHROOT_SCRIPTS:=""}
              ENABLE_UBOOT=${ENABLE_UBOOT:=false}
              UBOOTSRC_DIR=${UBOOTSRC_DIR:=""}
              ENABLE_FBTURBO=${ENABLE_FBTURBO:=false}
+             ENABLE_GR_ACCEL=${ENABLE_GR_ACCEL:=true}
              FBTURBOSRC_DIR=${FBTURBOSRC_DIR:=""}
              ENABLE_VIDEOCORE=${ENABLE_VIDEOCORE:=false}
              VIDEOCORESRC_DIR=${VIDEOCORESRC_DIR:=""}
              ENABLE_NEXMON=${ENABLE_NEXMON:=false}
              NEXMONSRC_DIR=${NEXMONSRC_DIR:=""}
              # SSH settings
              SSH_ENABLE=${SSH_ENABLE:=true}
              SSH_ENABLE_ROOT=${SSH_ENABLE_ROOT:=false}
              SSH_DISABLE_PASSWORD_AUTH=${SSH_DISABLE_PASSWORD_AUTH:=false}
              SSH_LIMIT_USERS=${SSH_LIMIT_USERS:=false}
              SSH_ROOT_PUB_KEY=${SSH_ROOT_PUB_KEY:=""}
              SSH_USER_PUB_KEY=${SSH_USER_PUB_KEY:=""}
              # Kernel compilation settings
              BUILD_KERNEL=${BUILD_KERNEL:=true}
              KERNEL_THREADS=${KERNEL_THREADS:=1}
              KERNEL_HEADERS=${KERNEL_HEADERS:=true}
              KERNEL_MENUCONFIG=${KERNEL_MENUCONFIG:=false}
              KERNEL_OLDDEFCONFIG=${KERNEL_OLDDEFCONFIG:=false}
              KERNEL_CCACHE=${KERNEL_CCACHE:=false}
              KERNEL_REMOVESRC=${KERNEL_REMOVESRC:=true}
              KERNELSRC_DIR=${KERNELSRC_DIR:=""}
              KERNELSRC_CLEAN=${KERNELSRC_CLEAN:=false}
              KERNELSRC_CONFIG=${KERNELSRC_CONFIG:=true}
              KERNELSRC_USRCONFIG=${KERNELSRC_USRCONFIG:=""}
              KERNELSRC_PREBUILT=${KERNELSRC_PREBUILT:=false}
              # Firmware directory: Blank if download from github
              RPI_FIRMWARE_DIR=${RPI_FIRMWARE_DIR:=""}
              KERNEL_DEFAULT_GOV=${KERNEL_DEFAULT_GOV:=ondemand}
              KERNEL_NF=${KERNEL_NF:=false}
              KERNEL_VIRT=${KERNEL_VIRT:=false}
              KERNEL_ZSWAP=${KERNEL_ZSWAP:=false}
              KERNEL_BPF=${KERNEL_BPF:=false}
              KERNEL_SECURITY=${KERNEL_SECURITY:=false}
              KERNEL_BTRFS=${KERNEL_BTRFS:=false}
              KERNEL_POEHAT=${KERNEL_POEHAT:=false}
              KERNEL_NSPAN=${KERNEL_NSPAN:=false}
              KERNEL_DHKEY=${KERNEL_DHKEY:=true}
              # Reduce disk usage settings
              ENABLE_REDUCE=${ENABLE_REDUCE:=false}
              REDUCE_APT=${REDUCE_APT:=true}
              REDUCE_DOC=${REDUCE_DOC:=false}
              REDUCE_MAN=${REDUCE_MAN:=false}
              REDUCE_VIM=${REDUCE_VIM:=false}
              REDUCE_BASH=${REDUCE_BASH:=false}
              REDUCE_HWDB=${REDUCE_HWDB:=false}
              REDUCE_SSHD=${REDUCE_SSHD:=false}
              REDUCE_LOCALE=${REDUCE_LOCALE:=false}
              REDUCE_KERNEL=${REDUCE_KERNEL:=false}
              # Encrypted filesystem settings
              ENABLE_CRYPTFS=${ENABLE_CRYPTFS:=false}
              CRYPTFS_PASSWORD=${CRYPTFS_PASSWORD:=""}
              CRYPTFS_MAPPING=${CRYPTFS_MAPPING:="secure"}
              CRYPTFS_CIPHER=${CRYPTFS_CIPHER:="aes-xts-plain64"}
              CRYPTFS_HASH=${CRYPTFS_HASH:="sha256"}
              CRYPTFS_XTSKEYSIZE=${CRYPTFS_XTSKEYSIZE:=256}
              #Dropbear-initramfs supports unlocking encrypted filesystem via SSH on bootup
              CRYPTFS_DROPBEAR=${CRYPTFS_DROPBEAR:=false}
              #Provide your own Dropbear Public RSA-OpenSSH Key otherwise it will be generated
              CRYPTFS_DROPBEAR_PUBKEY=${CRYPTFS_DROPBEAR_PUBKEY:=""}
              # Packages required for bootstrapping
              REQUIRED_PACKAGES="debootstrap debian-archive-keyring qemu-user-static binfmt-support dosfstools rsync bmap-tools whois git bc psmisc dbus bison flex libssl-dev sudo"
              MISSING_PACKAGES=""
              # Packages installed for c/c++ build environment in chroot (keep empty)
              COMPILER_PACKAGES=""
              # Check if apt-cacher-ng has port 3142 open and set APT_PROXY
              APT_CACHER_RUNNING=$(lsof -i :3142 | cut -d ' ' -f3 | uniq | sed '/^\s*$/d')
              if [ "${APT_CACHER_RUNNING}" = "apt-cacher-ng" ] ; then
                APT_PROXY=http://127.0.0.1:3142/
              fi
              # Setup architecture specific settings
              if [ -n "$SET_ARCH" ] ; then
                # 64-bit configuration
                if [ "$SET_ARCH" = 64 ] ; then
                  # General 64-bit depended settings
                  QEMU_BINARY=${QEMU_BINARY:=/usr/bin/qemu-aarch64-static}
                  KERNEL_ARCH=${KERNEL_ARCH:=arm64}
                  KERNEL_BIN_IMAGE=${KERNEL_BIN_IMAGE:="Image"}
                  # Raspberry Pi model specific settings
                  if [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ] || [ "$RPI_MODEL" = 4 ] ; then
                    if [ "$RPI_MODEL" != 4 ] ; then
                      KERNEL_DEFCONFIG=${KERNEL_DEFCONFIG:=bcmrpi3_defconfig}
                    else
                      KERNEL_DEFCONFIG=${KERNEL_DEFCONFIG:=bcm2711_defconfig}
                    fi
                    REQUIRED_PACKAGES="${REQUIRED_PACKAGES} crossbuild-essential-arm64"
                    RELEASE_ARCH=${RELEASE_ARCH:=arm64}
                    KERNEL_IMAGE=${KERNEL_IMAGE:=kernel8.img}
                    CROSS_COMPILE=${CROSS_COMPILE:=aarch64-linux-gnu-}
                  else
                    echo "error: Only Raspberry PI 3, 3B+ and 4 support 64-bit"
                    exit 1
                  fi
                fi
                # 32-bit configuration
                if [ "$SET_ARCH" = 32 ] ; then
                  # General 32-bit dependend settings
                  QEMU_BINARY=${QEMU_BINARY:=/usr/bin/qemu-arm-static}
                  KERNEL_ARCH=${KERNEL_ARCH:=arm}
                  KERNEL_BIN_IMAGE=${KERNEL_BIN_IMAGE:="zImage"}
                  # Raspberry Pi model specific settings
                  if [ "$RPI_MODEL" = 0 ] || [ "$RPI_MODEL" = 1 ] || [ "$RPI_MODEL" = 1P ] ; then
                    REQUIRED_PACKAGES="${REQUIRED_PACKAGES} crossbuild-essential-armel"
                    KERNEL_DEFCONFIG=${KERNEL_DEFCONFIG:=bcmrpi_defconfig}
                    RELEASE_ARCH=${RELEASE_ARCH:=armel}
                    KERNEL_IMAGE=${KERNEL_IMAGE:=kernel.img}
                    CROSS_COMPILE=${CROSS_COMPILE:=arm-linux-gnueabi-}
              	  if [ $ENABLE_XORG = true ] ; then
              	    if [$RELEASE = "stretch" ] || [$RELEASE = "oldstable" ] ; then
              	      printf "\nBest support for armel architecture is provided under Debian stretch/oldstable. Choose yes to change release to Debian stretch[y/n] "
              	      read -r confirm
                        if [ "$confirm" = "y" ] ; then
              		    $RELEASE = "stretch"
              		  fi
              	    fi
              	  fi
                  fi
                  # Raspberry Pi model specific settings
                  if [ "$RPI_MODEL" = 2 ] || [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ] || [ "$RPI_MODEL" = 4 ] ; then
                    if [ "$RPI_MODEL" != 4 ] ; then
                      KERNEL_DEFCONFIG=${KERNEL_DEFCONFIG:=bcm2709_defconfig}
              		KERNEL_IMAGE=${KERNEL_IMAGE:=kernel7.img}
                    else
                      KERNEL_DEFCONFIG=${KERNEL_DEFCONFIG:=bcm2711_defconfig}
              		KERNEL_IMAGE=${KERNEL_IMAGE:=kernel7l.img}
                    fi
                    REQUIRED_PACKAGES="${REQUIRED_PACKAGES} crossbuild-essential-armhf"
                    RELEASE_ARCH=${RELEASE_ARCH:=armhf}
                    CROSS_COMPILE=${CROSS_COMPILE:=arm-linux-gnueabihf-}
                  fi
                fi
              # SET_ARCH not set
              else
                echo "error: Please set '32' or '64' as value for SET_ARCH"
                exit 1
              fi
              # Device specific configuration and U-Boot configuration
              case "$RPI_MODEL" in
 )
                  DTB_FILE=${DTB_FILE:=bcm2708-rpi-0-w.dtb}
                  UBOOT_CONFIG=${UBOOT_CONFIG:=rpi_defconfig}
                  ;;
 )
                  DTB_FILE=${DTB_FILE:=bcm2708-rpi-b.dtb}
                  UBOOT_CONFIG=${UBOOT_CONFIG:=rpi_defconfig}
                  ;;
 P)
                  DTB_FILE=${DTB_FILE:=bcm2708-rpi-b-plus.dtb}
                  UBOOT_CONFIG=${UBOOT_CONFIG:=rpi_defconfig}
                  ;;
 )
                  DTB_FILE=${DTB_FILE:=bcm2709-rpi-2-b.dtb}
                  UBOOT_CONFIG=${UBOOT_CONFIG:=rpi_2_defconfig}
                  ;;
 )
                  DTB_FILE=${DTB_FILE:=bcm2710-rpi-3-b.dtb}
                  UBOOT_CONFIG=${UBOOT_CONFIG:=rpi_3_defconfig}
                  ;;
 P)
                  DTB_FILE=${DTB_FILE:=bcm2710-rpi-3-b.dtb}
                  UBOOT_CONFIG=${UBOOT_CONFIG:=rpi_3_defconfig}
                  ;;
 )
                  DTB_FILE=${DTB_FILE:=bcm2711-rpi-4-b.dtb}
                  UBOOT_CONFIG=${UBOOT_CONFIG:=rpi_4_defconfig}
                  ;;
                *)
                  echo "error: Raspberry Pi model $RPI_MODEL is not supported!"
                  exit 1
                  ;;
              esac
              # Raspberry PI 0,3,3P with Bluetooth and Wifi onboard
              if [ "$RPI_MODEL" = 0 ] || [ "$RPI_MODEL" = 3 ] || [ "$RPI_MODEL" = 3P ] || [ "$RPI_MODEL" = 4 ] ; then
                # Include bluetooth packages on supported boards
                if [ "$ENABLE_BLUETOOTH" = true ] ; then
                  APT_INCLUDES="${APT_INCLUDES},bluetooth,bluez"
                fi
                if [ "$ENABLE_WIRELESS" = true ] ; then
                  APT_INCLUDES="${APT_INCLUDES},wireless-tools,crda,wireless-regdb,wpasupplicant"
                fi
              else # Raspberry PI 1,1P,2 without Wifi and bluetooth onboard
                # Check if the internal wireless interface is not supported by the RPi model
                if [ "$ENABLE_WIRELESS" = true ] || [ "$ENABLE_BLUETOOTH" = true ]; then
                  echo "error: The selected Raspberry Pi model has no integrated interface for wireless or bluetooth"
                  exit 1
                fi
              fi
              if [ "$BUILD_KERNEL" = false ] && [ "$ENABLE_NEXMON" = true ]; then
                echo "error: You have to compile kernel sources, if you want to enable nexmon"
                exit 1
              fi
              # Prepare date string for default image file name
              DATE="$(date +%Y-%m-%d)"
              if [ -z "$KERNEL_BRANCH" ] ; then
                IMAGE_NAME=${IMAGE_NAME:=${BASEDIR}/${DATE}-${KERNEL_ARCH}-CURRENT-rpi${RPI_MODEL}-${RELEASE}-${RELEASE_ARCH}}
              else
                IMAGE_NAME=${IMAGE_NAME:=${BASEDIR}/${DATE}-${KERNEL_ARCH}-${KERNEL_BRANCH}-rpi${RPI_MODEL}-${RELEASE}-${RELEASE_ARCH}}
              fi
              # Check if DISABLE_UNDERVOLT_WARNINGS parameter value is supported
              if [ -n "$DISABLE_UNDERVOLT_WARNINGS" ] ; then
                if [ "$DISABLE_UNDERVOLT_WARNINGS" != 1 ] && [ "$DISABLE_UNDERVOLT_WARNINGS" != 2 ] ; then
                  echo "error: DISABLE_UNDERVOLT_WARNINGS=${DISABLE_UNDERVOLT_WARNINGS} is not supported"
                  exit 1
                fi
              fi
              # Add cmake to compile videocore sources
              if [ "$ENABLE_VIDEOCORE" = true ] ; then
                REQUIRED_PACKAGES="${REQUIRED_PACKAGES} cmake"
              fi
              # Add deps for nexmon
              if [ "$ENABLE_NEXMON" = true ] ; then
                REQUIRED_PACKAGES="${REQUIRED_PACKAGES} libgmp3-dev gawk qpdf make autoconf automake build-essential libtool"
              fi
              # Add libncurses5 to enable kernel menuconfig
              if [ "$KERNEL_MENUCONFIG" = true ] ; then
                REQUIRED_PACKAGES="${REQUIRED_PACKAGES} libncurses-dev"
              fi
              # Add ccache compiler cache for (faster) kernel cross (re)compilation
              if [ "$KERNEL_CCACHE" = true ] ; then
                REQUIRED_PACKAGES="${REQUIRED_PACKAGES} ccache"
              fi
              # Add cryptsetup package to enable filesystem encryption
              if [ "$ENABLE_CRYPTFS" = true ]  && [ "$BUILD_KERNEL" = true ] ; then
                REQUIRED_PACKAGES="${REQUIRED_PACKAGES} cryptsetup"
                APT_INCLUDES="${APT_INCLUDES},cryptsetup,busybox,console-setup,cryptsetup-initramfs"
                # If cryptfs,dropbear and initramfs are enabled include dropbear-initramfs package
                if [ "$CRYPTFS_DROPBEAR" = true ] && [ "$ENABLE_INITRAMFS" = true ]; then
                  APT_INCLUDES="${APT_INCLUDES},dropbear-initramfs"
                fi
                if [ -z "$CRYPTFS_PASSWORD" ] ; then
                  echo "error: no password defined (CRYPTFS_PASSWORD)!"
                  exit 1
                fi
                ENABLE_INITRAMFS=true
              fi
              # Add initramfs generation tools
              if [ "$ENABLE_INITRAMFS" = true ] && [ "$BUILD_KERNEL" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},initramfs-tools"
              fi
              # Add device-tree-compiler required for building the U-Boot bootloader
              if [ "$ENABLE_UBOOT" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},device-tree-compiler,bc"
              fi
              if [ "$ENABLE_USBBOOT" = true ] ; then
                if [ "$RPI_MODEL" = 0 ] || [ "$RPI_MODEL" = 1P ] || [ "$RPI_MODEL" = 1 ] || [ "$RPI_MODEL" = 2 ]; then
                  echo "error: Booting from USB alone is only supported by Raspberry Pi 3 and 3P"
                  exit 1
                fi
              fi
              # Check if root SSH (v2) public key file exists
              if [ -n "$SSH_ROOT_PUB_KEY" ] ; then
                if [ ! -f "$SSH_ROOT_PUB_KEY" ] ; then
                  echo "error: '$SSH_ROOT_PUB_KEY' specified SSH public key file not found (SSH_ROOT_PUB_KEY)!"
                  exit 1
                fi
              fi
              # Check if $USER_NAME SSH (v2) public key file exists
              if [ -n "$SSH_USER_PUB_KEY" ] ; then
                if [ ! -f "$SSH_USER_PUB_KEY" ] ; then
                  echo "error: '$SSH_USER_PUB_KEY' specified SSH public key file not found (SSH_USER_PUB_KEY)!"
                  exit 1
                fi
              fi
              if [ "$ENABLE_NEXMON" = true ] && [ -n "$KERNEL_BRANCH" ] ; then
                echo "error: Please unset KERNEL_BRANCH if using ENABLE_NEXMON"
                exit 1
              fi
              # Check if all required packages are installed on the build system
              for package in $REQUIRED_PACKAGES ; do
                if [ "$(dpkg-query -W -f='${Status}' "$package")" != "install ok installed" ] ; then
                  MISSING_PACKAGES="${MISSING_PACKAGES} $package"
                fi
              done
              # If there are missing packages ask confirmation for install, or exit
              if [ -n "$MISSING_PACKAGES" ] ; then
                echo "the following packages needed by this script are not installed:"
                echo "$MISSING_PACKAGES"
                printf "\ndo you want to install the missing packages right now? [y/n] "
                read -r confirm
                [ "$confirm" != "y" ] && exit 1
                # Make sure all missing required packages are installed
                apt-get update && apt-get -qq -y install `echo "${MISSING_PACKAGES}" | sed "s/ //"`
              fi
              # Check if ./bootstrap.d directory exists
              if [ ! -d "./bootstrap.d/" ] ; then
                echo "error: './bootstrap.d' required directory not found!"
                exit 1
              fi
              # Check if ./files directory exists
              if [ ! -d "./files/" ] ; then
                echo "error: './files' required directory not found!"
                exit 1
              fi
              # Check if specified KERNELSRC_DIR directory exists
              if [ -n "$KERNELSRC_DIR" ] && [ ! -d "$KERNELSRC_DIR" ] ; then
                echo "error: '${KERNELSRC_DIR}' specified directory not found (KERNELSRC_DIR)!"
                exit 1
              fi
              # Check if specified UBOOTSRC_DIR directory exists
              if [ -n "$UBOOTSRC_DIR" ] && [ ! -d "$UBOOTSRC_DIR" ] ; then
                echo "error: '${UBOOTSRC_DIR}' specified directory not found (UBOOTSRC_DIR)!"
                exit 1
              fi
              # Check if specified VIDEOCORESRC_DIR directory exists
              if [ -n "$VIDEOCORESRC_DIR" ] && [ ! -d "$VIDEOCORESRC_DIR" ] ; then
                echo "error: '${VIDEOCORESRC_DIR}' specified directory not found (VIDEOCORESRC_DIR)!"
                exit 1
              fi
              # Check if specified FBTURBOSRC_DIR directory exists
              if [ -n "$FBTURBOSRC_DIR" ] && [ ! -d "$FBTURBOSRC_DIR" ] ; then
                echo "error: '${FBTURBOSRC_DIR}' specified directory not found (FBTURBOSRC_DIR)!"
                exit 1
              fi
              # Check if specified NEXMONSRC_DIR directory exists
              if [ -n "$NEXMONSRC_DIR" ] && [ ! -d "$NEXMONSRC_DIR" ] ; then
                echo "error: '${NEXMONSRC_DIR}' specified directory not found (NEXMONSRC_DIR)!"
                exit 1
              fi
              # Check if specified CHROOT_SCRIPTS directory exists
              if [ -n "$CHROOT_SCRIPTS" ] && [ ! -d "$CHROOT_SCRIPTS" ] ; then
                 echo "error: ${CHROOT_SCRIPTS} specified directory not found (CHROOT_SCRIPTS)!"
                 exit 1
              fi
              # Check if specified device mapping already exists (will be used by cryptsetup)
              if [ -r "/dev/mapping/${CRYPTFS_MAPPING}" ] ; then
                echo "error: mapping /dev/mapping/${CRYPTFS_MAPPING} already exists, not proceeding"
                exit 1
              fi
              # Don't clobber an old build
              if [ -e "$BUILDDIR" ] ; then
                echo "error: directory ${BUILDDIR} already exists, not proceeding"
                exit 1
              fi
              # Setup chroot directory
              mkdir -p "${R}"
              # Check if build directory has enough of free disk space >512MB
              if [ "$(df --output=avail "${BUILDDIR}" | sed "1d")" -le "524288" ] ; then
                echo "error: ${BUILDDIR} not enough space left to generate the output image!"
                exit 1
              fi
              set -x
              # Call "cleanup" function on various signals and errors
              trap cleanup 0 1 2 3 6
              # Add required packages for the minbase installation
              if [ "$ENABLE_MINBASE" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},vim-tiny,netbase,net-tools,ifupdown"
              fi
              # Add parted package, required to get partprobe utility
              if [ "$EXPANDROOT" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},parted"
              fi
              # Add dphys-swapfile package, required to enable swap
              if [ "$ENABLE_DPHYSSWAP" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},dphys-swapfile"
              fi
              # Add dbus package, recommended if using systemd
              if [ "$ENABLE_DBUS" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},dbus"
              fi
              # Add iptables IPv4/IPv6 package
              if [ "$ENABLE_IPTABLES" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},iptables,iptables-persistent"
              fi
              # Add apparmor for KERNEL_SECURITY
              if [ "$KERNEL_SECURITY" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},apparmor,apparmor-utils,apparmor-profiles,apparmor-profiles-extra,libapparmor-perl"
              fi
              # Add openssh server package
              if [ "$SSH_ENABLE" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},openssh-server"
              fi
              # Add alsa-utils package
              if [ "$ENABLE_SOUND" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},alsa-utils"
              fi
              # Add rng-tools package
              if [ "$ENABLE_HWRANDOM" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},rng-tools"
              fi
              # Add fbturbo video driver
              if [ "$ENABLE_FBTURBO" = true ] ; then
                # Enable xorg package dependencies
                ENABLE_XORG=true
              fi
              # Add user defined window manager package
              if [ -n "$ENABLE_WM" ] ; then
                APT_INCLUDES="${APT_INCLUDES},${ENABLE_WM}"
                # Enable xorg package dependencies
                ENABLE_XORG=true
              fi
              # Add xorg package
              if [ "$ENABLE_XORG" = true ] ; then
                APT_INCLUDES="${APT_INCLUDES},xorg,dbus-x11"
              fi
              # Replace selected packages with smaller clones
              if [ "$ENABLE_REDUCE" = true ] ; then
                # Add levee package instead of vim-tiny
                if [ "$REDUCE_VIM" = true ] ; then
                  APT_INCLUDES="$(echo ${APT_INCLUDES} | sed "s/vim-tiny/levee/")"
                fi
                # Add dropbear package instead of openssh-server
                if [ "$REDUCE_SSHD" = true ] ; then
                  APT_INCLUDES="$(echo "${APT_INCLUDES}" | sed "s/openssh-server/dropbear/")"
                fi
              fi
              # Configure systemd-sysv exclude to make halt/reboot/shutdown scripts available
              if [ "$ENABLE_SYSVINIT" = false ] ; then
                APT_EXCLUDES="--exclude=${APT_EXCLUDES},init,systemd-sysv"
              fi
              # Configure kernel sources if no KERNELSRC_DIR
              if [ "$BUILD_KERNEL" = true ] && [ -z "$KERNELSRC_DIR" ] ; then
                KERNELSRC_CONFIG=true
              fi
              # Configure reduced kernel
              if [ "$KERNEL_REDUCE" = true ] ; then
                KERNELSRC_CONFIG=false
              fi
              # Configure qemu compatible kernel
              if [ "$ENABLE_QEMU" = true ] ; then
                DTB_FILE=vexpress-v2p-ca15_a7.dtb
                UBOOT_CONFIG=vexpress_ca15_tc2_defconfig
                KERNEL_DEFCONFIG="vexpress_defconfig"
                if [ "$KERNEL_MENUCONFIG" = false ] ; then
                  KERNEL_OLDDEFCONFIG=true
                fi
              fi
              # Execute bootstrap scripts
              for SCRIPT in bootstrap.d/*.sh; do
                head -n 3 "$SCRIPT"
                . "$SCRIPT"
              done
              ## Execute custom bootstrap scripts
              if [ -d "custom.d" ] ; then
                for SCRIPT in custom.d/*.sh; do
                  . "$SCRIPT"
                done
              fi
              # Execute custom scripts inside the chroot
              if [ -n "$CHROOT_SCRIPTS" ] && [ -d "$CHROOT_SCRIPTS" ] ; then
                cp -r "${CHROOT_SCRIPTS}" "${R}/chroot_scripts"
                chroot_exec /bin/bash -x <<'EOF'
              for SCRIPT in /chroot_scripts/* ; do
                if [ -f $SCRIPT -a -x $SCRIPT ] ; then
                  $SCRIPT
                fi
              done
              EOF
                rm -rf "${R}/chroot_scripts"
              fi
              # Remove c/c++ build environment from the chroot
              chroot_remove_cc
              # Generate required machine-id
              MACHINE_ID=$(dbus-uuidgen)
              echo -n "${MACHINE_ID}" > "${R}/var/lib/dbus/machine-id"
              echo -n "${MACHINE_ID}" > "${ETC_DIR}/machine-id"
              # APT Cleanup
              chroot_exec apt-get -y clean
              chroot_exec apt-get -y autoclean
              chroot_exec apt-get -y autoremove
              # Unmount mounted filesystems
              umount -l "${R}/proc"
              umount -l "${R}/sys"
              # Clean up directories
              rm -rf "${R}/run/*"
              rm -rf "${R}/tmp/*"
              # Clean up APT proxy settings
              if [ "$KEEP_APT_PROXY" = false ] ; then
                rm -f "${ETC_DIR}/apt/apt.conf.d/10proxy"
              fi
              # Clean up files
              rm -f "${ETC_DIR}/ssh/ssh_host_*"
              rm -f "${ETC_DIR}/dropbear/dropbear_*"
              rm -f "${ETC_DIR}/apt/sources.list.save"
              rm -f "${ETC_DIR}/resolvconf/resolv.conf.d/original"
              rm -f "${ETC_DIR}/*-"
              rm -f "${ETC_DIR}/resolv.conf"
              rm -f "${R}/root/.bash_history"
              rm -f "${R}/var/lib/urandom/random-seed"
              rm -f "${R}/initrd.img"
              rm -f "${R}/vmlinuz"
              rm -f "${R}${QEMU_BINARY}"
              if [ "$ENABLE_QEMU" = true ] ; then
                # Setup QEMU directory
                mkdir "${BASEDIR}/qemu"
                # Copy kernel image to QEMU directory
                install_readonly "${BOOT_DIR}/${KERNEL_IMAGE}" "${BASEDIR}/qemu/${KERNEL_IMAGE}"
                # Copy kernel config to QEMU directory
                install_readonly "${R}/boot/config-${KERNEL_VERSION}" "${BASEDIR}/qemu/config-${KERNEL_VERSION}"
                # Copy kernel dtbs to QEMU directory
                for dtb in "${BOOT_DIR}/"*.dtb ; do
                  if [ -f "${dtb}" ] ; then
                    install_readonly "${dtb}" "${BASEDIR}/qemu/"
                  fi
                done
                # Copy kernel overlays to QEMU directory
                if [ -d "${BOOT_DIR}/overlays" ] ; then
                  # Setup overlays dtbs directory
                  mkdir "${BASEDIR}/qemu/overlays"
                  for dtb in "${BOOT_DIR}/overlays/"*.dtbo ; do
                    if [ -f "${dtb}" ] ; then
                      install_readonly "${dtb}" "${BASEDIR}/qemu/overlays/"
                    fi
                  done
                fi
                # Copy u-boot files to QEMU directory
                if [ "$ENABLE_UBOOT" = true ] ; then
                  if [ -f "${BOOT_DIR}/u-boot.bin" ] ; then
                    install_readonly "${BOOT_DIR}/u-boot.bin" "${BASEDIR}/qemu/u-boot.bin"
                  fi
                  if [ -f "${BOOT_DIR}/uboot.mkimage" ] ; then
                    install_readonly "${BOOT_DIR}/uboot.mkimage" "${BASEDIR}/qemu/uboot.mkimage"
                  fi
                  if [ -f "${BOOT_DIR}/boot.scr" ] ; then
                    install_readonly "${BOOT_DIR}/boot.scr" "${BASEDIR}/qemu/boot.scr"
                  fi
                fi
                # Copy initramfs to QEMU directory
                if [ -f "${BOOT_DIR}/initramfs-${KERNEL_VERSION}" ] ; then
                  install_readonly "${BOOT_DIR}/initramfs-${KERNEL_VERSION}" "${BASEDIR}/qemu/initramfs-${KERNEL_VERSION}"
                fi
              fi
              # Calculate size of the chroot directory in KB
              CHROOT_SIZE=$(expr "$(du -s "${R}" | awk '{ print $1 }')")
              # Calculate the amount of needed 512 Byte sectors
              TABLE_SECTORS=$(expr 1 \* 1024 \* 1024 \/ 512)
              FRMW_SECTORS=$(expr 64 \* 1024 \* 1024 \/ 512)
              ROOT_OFFSET=$(expr "${TABLE_SECTORS}" + "${FRMW_SECTORS}")
              # The root partition is EXT4
              # This means more space than the actual used space of the chroot is used.
              # As overhead for journaling and reserved blocks 35% are added.
              ROOT_SECTORS=$(expr "$(expr "${CHROOT_SIZE}" + "${CHROOT_SIZE}" \/ 100 \* 35)" \* 1024 \/ 512)
              # Calculate required image size in 512 Byte sectors
              IMAGE_SECTORS=$(expr "${TABLE_SECTORS}" + "${FRMW_SECTORS}" + "${ROOT_SECTORS}")
              # Prepare image file
              if [ "$ENABLE_SPLITFS" = true ] ; then
                dd if=/dev/zero of="$IMAGE_NAME-frmw.img" bs=512 count="${TABLE_SECTORS}"
                dd if=/dev/zero of="$IMAGE_NAME-frmw.img" bs=512 count=0 seek="${FRMW_SECTORS}"
                dd if=/dev/zero of="$IMAGE_NAME-root.img" bs=512 count="${TABLE_SECTORS}"
                dd if=/dev/zero of="$IMAGE_NAME-root.img" bs=512 count=0 seek="${ROOT_SECTORS}"
                # Write firmware/boot partition tables
                sfdisk -q -L -uS -f "$IMAGE_NAME-frmw.img" 2> /dev/null <<EOM
              ${TABLE_SECTORS},${FRMW_SECTORS},c,*
              EOM
                # Write root partition table
                sfdisk -q -L -uS -f "$IMAGE_NAME-root.img" 2> /dev/null <<EOM
              ${TABLE_SECTORS},${ROOT_SECTORS},83
              EOM
                # Setup temporary loop devices
                FRMW_LOOP="$(losetup -o 1M --sizelimit 64M -f --show "$IMAGE_NAME"-frmw.img)"
                ROOT_LOOP="$(losetup -o 1M -f --show "$IMAGE_NAME"-root.img)"
              else # ENABLE_SPLITFS=false
                dd if=/dev/zero of="$IMAGE_NAME.img" bs=512 count="${TABLE_SECTORS}"
                dd if=/dev/zero of="$IMAGE_NAME.img" bs=512 count=0 seek="${IMAGE_SECTORS}"
                # Write partition table
                sfdisk -q -L -uS -f "$IMAGE_NAME.img" 2> /dev/null <<EOM
              ${TABLE_SECTORS},${FRMW_SECTORS},c,*
              ${ROOT_OFFSET},${ROOT_SECTORS},83
              EOM
                # Setup temporary loop devices
                FRMW_LOOP="$(losetup -o 1M --sizelimit 64M -f --show "$IMAGE_NAME".img)"
                ROOT_LOOP="$(losetup -o 65M -f --show "$IMAGE_NAME".img)"
              fi
              if [ "$ENABLE_CRYPTFS" = true ] ; then
                # Create dummy ext4 fs
                mkfs.ext4 "$ROOT_LOOP"
                # Setup password keyfile
                touch .password
                chmod 600 .password
                echo -n ${CRYPTFS_PASSWORD} > .password
                # Initialize encrypted partition
                cryptsetup --verbose --debug -q luksFormat "${ROOT_LOOP}" -c "${CRYPTFS_CIPHER}" -h "${CRYPTFS_HASH}" -s "${CRYPTFS_XTSKEYSIZE}" .password
                # Open encrypted partition and setup mapping
                cryptsetup luksOpen "${ROOT_LOOP}" -d .password "${CRYPTFS_MAPPING}"
                # Secure delete password keyfile
                shred -zu .password
                # Update temporary loop device
                ROOT_LOOP="/dev/mapper/${CRYPTFS_MAPPING}"
                # Wipe encrypted partition (encryption cipher is used for randomness)
                dd if=/dev/zero of="${ROOT_LOOP}" bs=512 count="$(blockdev --getsz "${ROOT_LOOP}")"
              fi
              # Build filesystems
              mkfs.vfat "$FRMW_LOOP"
              mkfs.ext4 "$ROOT_LOOP"
              # Mount the temporary loop devices
              mkdir -p "$BUILDDIR/mount"
              mount "$ROOT_LOOP" "$BUILDDIR/mount"
              mkdir -p "$BUILDDIR/mount/boot/firmware"
              mount "$FRMW_LOOP" "$BUILDDIR/mount/boot/firmware"
              # Copy all files from the chroot to the loop device mount point directory
              rsync -a "${R}/" "$BUILDDIR/mount/"
              # Unmount all temporary loop devices and mount points
              cleanup
              # Create block map file(s) of image(s)
              if [ "$ENABLE_SPLITFS" = true ] ; then
                # Create block map files for "bmaptool"
                bmaptool create -o "$IMAGE_NAME-frmw.bmap" "$IMAGE_NAME-frmw.img"
                bmaptool create -o "$IMAGE_NAME-root.bmap" "$IMAGE_NAME-root.img"
                # Image was successfully created
                echo "$IMAGE_NAME-frmw.img ($(expr \( "${TABLE_SECTORS}" + "${FRMW_SECTORS}" \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
                echo "$IMAGE_NAME-root.img ($(expr \( "${TABLE_SECTORS}" + "${ROOT_SECTORS}" \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
              else
                # Create block map file for "bmaptool"
                bmaptool create -o "$IMAGE_NAME.bmap" "$IMAGE_NAME.img"
                # Image was successfully created
                echo "$IMAGE_NAME.img ($(expr \( "${TABLE_SECTORS}" + "${FRMW_SECTORS}" + "${ROOT_SECTORS}" \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
                # Create qemu qcow2 image
                if [ "$ENABLE_QEMU" = true ] ; then
                  QEMU_IMAGE=${QEMU_IMAGE:=${BASEDIR}/qemu/${DATE}-${KERNEL_ARCH}-CURRENT-rpi${RPI_MODEL}-${RELEASE}-${RELEASE_ARCH}}
                  QEMU_SIZE=16G
                  qemu-img convert -f raw -O qcow2 "$IMAGE_NAME".img "$QEMU_IMAGE".qcow2
                  qemu-img resize "$QEMU_IMAGE".qcow2 $QEMU_SIZE
                  echo "$QEMU_IMAGE.qcow2 ($QEMU_SIZE)" ": successfully created"
                fi
              fi

General Comments 0

Écrire
Preview

Vous devez vous connecter pour laisser un commentaire. Se connecter maintenant

No TODOs yet

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Dépôts
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages