##// END OF EJS Templates
Merge branch 'master' into rpifegen
vidal -
r182:a67eae38695d Fusion
parent child
Show More
@@ -0,0 +1,15
1 # Configuration template file used by rpi23-gen-image.sh
2 # Debian Stretch using the Arm64 for kernel compilation and Debian distribution.
3
4 RPI_MODEL=3
5 RELEASE=stretch
6 BUILD_KERNEL=true
7 KERNEL_ARCH=arm64
8 RELEASE_ARCH=arm64
9 CROSS_COMPILE=aarch64-linux-gnu-
10 QEMU_BINARY=/usr/bin/qemu-aarch64-static
11 KERNEL_DEFCONFIG=bcmrpi3_defconfig
12 KERNEL_BIN_IMAGE=Image
13 KERNEL_IMAGE=kernel8.img
14 KERNEL_BRANCH=rpi-4.11.y
15 ENABLE_WIRELESS=true
@@ -1,425 +1,452
1 1 # rpi23-gen-image
2 2 ## Introduction
3 `rpi23-gen-image.sh` is an advanced Debian Linux bootstrapping shell script for generating Debian OS images for Raspberry Pi 2 (RPi2) and Raspberry Pi 3 (RPi3) computers. The script at this time supports the bootstrapping of the Debian (armhf) releases `jessie` and `stretch`. Raspberry Pi 3 images are currently generated for 32-bit mode only.
3 `rpi23-gen-image.sh` is an advanced Debian Linux bootstrapping shell script for generating Debian OS images for Raspberry Pi 2 (RPi2) and Raspberry Pi 3 (RPi3) computers. The script at this time supports the bootstrapping of the Debian (armhf) releases `jessie` and `stretch`. Raspberry Pi 3 images are generated for 32-bit mode only. Raspberry Pi 3 64-bit images can be generated using custom configuration parameters (```templates/rpi3-stretch-arm64-4.11.y```).
4 4
5 5 ## Build dependencies
6 6 The following list of Debian packages must be installed on the build system because they are essentially required for the bootstrapping process. The script will check if all required packages are installed and missing packages will be installed automatically if confirmed by the user.
7 7
8 8 ```debootstrap debian-archive-keyring qemu-user-static binfmt-support dosfstools rsync bmap-tools whois git bc psmisc dbus sudo```
9 9
10 10 It is recommended to configure the `rpi23-gen-image.sh` script to build and install the latest Raspberry Pi Linux kernel. For the RPi3 this is mandetory. Kernel compilation and linking will be performed on the build system using an ARM (armhf) cross-compiler toolchain.
11 11
12 12 The script has been tested using the default `crossbuild-essential-armhf` toolchain meta package on Debian Linux `jessie` and `stretch` build systems. Please check the [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains) for further information.
13 13
14 14 If a Debian Linux `jessie` build system is used it will be required to add the [Debian Cross-toolchains repository](http://emdebian.org/tools/debian/) first:
15 15
16 16 ```
17 17 echo "deb http://emdebian.org/tools/debian/ jessie main" > /etc/apt/sources.list.d/crosstools.list
18 18 sudo -u nobody wget -O - http://emdebian.org/tools/debian/emdebian-toolchain-archive.key | apt-key add -
19 19 dpkg --add-architecture armhf
20 20 apt-get update
21 21 ```
22 22
23 23 ## Command-line parameters
24 24 The script accepts certain command-line parameters to enable or disable specific OS features, services and configuration settings. These parameters are passed to the `rpi23-gen-image.sh` script via (simple) shell-variables. Unlike environment shell-variables (simple) shell-variables are defined at the beginning of the command-line call of the `rpi23-gen-image.sh` script.
25 25
26 #####Command-line examples:
26 ##### Command-line examples:
27 27 ```shell
28 28 ENABLE_UBOOT=true ./rpi23-gen-image.sh
29 29 ENABLE_CONSOLE=false ENABLE_IPV6=false ./rpi23-gen-image.sh
30 30 ENABLE_WM=xfce4 ENABLE_FBTURBO=true ENABLE_MINBASE=true ./rpi23-gen-image.sh
31 31 ENABLE_HARDNET=true ENABLE_IPTABLES=true /rpi23-gen-image.sh
32 32 APT_SERVER=ftp.de.debian.org APT_PROXY="http://127.0.0.1:3142/" ./rpi23-gen-image.sh
33 33 ENABLE_MINBASE=true ./rpi23-gen-image.sh
34 34 BUILD_KERNEL=true ENABLE_MINBASE=true ENABLE_IPV6=false ./rpi23-gen-image.sh
35 35 BUILD_KERNEL=true KERNELSRC_DIR=/tmp/linux ./rpi23-gen-image.sh
36 36 ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
37 37 ENABLE_CRYPTFS=true CRYPTFS_PASSWORD=changeme EXPANDROOT=false ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
38 38 RELEASE=stretch BUILD_KERNEL=true ./rpi23-gen-image.sh
39 39 RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
40 40 RELEASE=stretch RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
41 41 ```
42 42
43 43 ## Configuration template files
44 44 To avoid long lists of command-line parameters and to help to store the favourite parameter configurations the `rpi23-gen-image.sh` script supports so called configuration template files (`CONFIG_TEMPLATE`=template). These are simple text files located in the `./templates` directory that contain the list of configuration parameters that will be used. New configuration template files can be added to the `./templates` directory.
45 45
46 #####Command-line examples:
46 ##### Command-line examples:
47 47 ```shell
48 48 CONFIG_TEMPLATE=rpi3stretch ./rpi23-gen-image.sh
49 49 CONFIG_TEMPLATE=rpi2stretch ./rpi23-gen-image.sh
50 50 ```
51 51
52 52 ## Supported parameters and settings
53 53 #### APT settings:
54 54 ##### `APT_SERVER`="ftp.debian.org"
55 55 Set Debian packages server address. Choose a server from the list of Debian worldwide [mirror sites](https://www.debian.org/mirror/list). Using a nearby server will probably speed-up all required downloads within the bootstrapping process.
56 56
57 57 ##### `APT_PROXY`=""
58 58 Set Proxy server address. Using a local Proxy-Cache like `apt-cacher-ng` will speed-up the bootstrapping process because all required Debian packages will only be downloaded from the Debian mirror site once.
59 59
60 60 ##### `APT_INCLUDES`=""
61 A comma separated list of additional packages to be installed during bootstrapping.
61 A comma separated list of additional packages to be installed by debootstrap during bootstrapping.
62
63 ##### `APT_INCLUDES_LATE`=""
64 A comma separated list of additional packages to be installed by apt after bootstrapping and after APT sources are set up. This is useful for packages with pre-depends, which debootstrap do not handle well.
62 65
63 66 ---
64 67
65 68 #### General system settings:
66 69 ##### `RPI_MODEL`=2
67 70 Specifiy the target Raspberry Pi hardware model. The script at this time supports the Raspberry Pi models `2` and `3`. `BUILD_KERNEL`=true will automatically be set if the Raspberry Pi model `3` is used.
68 71
69 72 ##### `RELEASE`="jessie"
70 73 Set the desired Debian release name. The script at this time supports the bootstrapping of the Debian releases "jessie" and "stretch". `BUILD_KERNEL`=true will automatically be set if the Debian release `stretch` is used.
71 74
75 ##### `RELEASE_ARCH`="armhf"
76 Set the desired Debian release architecture.
77
72 78 ##### `HOSTNAME`="rpi$RPI_MODEL-$RELEASE"
73 79 Set system host name. It's recommended that the host name is unique in the corresponding subnet.
74 80
75 81 ##### `PASSWORD`="raspberry"
76 82 Set system `root` password. It's **STRONGLY** recommended that you choose a custom password.
77 83
78 84 ##### `USER_PASSWORD`="raspberry"
79 85 Set password for the created non-root user `USER_NAME`=pi. Ignored if `ENABLE_USER`=false. It's **STRONGLY** recommended that you choose a custom password.
80 86
81 87 ##### `DEFLOCAL`="en_US.UTF-8"
82 88 Set default system locale. This setting can also be changed inside the running OS using the `dpkg-reconfigure locales` command. Please note that on using this parameter the script will automatically install the required packages `locales`, `keyboard-configuration` and `console-setup`.
83 89
84 90 ##### `TIMEZONE`="Europe/Berlin"
85 91 Set default system timezone. All available timezones can be found in the `/usr/share/zoneinfo/` directory. This setting can also be changed inside the running OS using the `dpkg-reconfigure tzdata` command.
86 92
87 93 ##### `EXPANDROOT`=true
88 94 Expand the root partition and filesystem automatically on first boot.
89 95
90 96 ---
91 97
92 #### Keyboard settings:
98 #### Keyboard settings:
93 99 These options are used to configure keyboard layout in `/etc/default/keyboard` for console and Xorg. These settings can also be changed inside the running OS using the `dpkg-reconfigure keyboard-configuration` command.
94 100
95 101 ##### `XKB_MODEL`=""
96 102 Set the name of the model of your keyboard type.
97 103
98 104 ##### `XKB_LAYOUT`=""
99 105 Set the supported keyboard layout(s).
100 106
101 107 ##### `XKB_VARIANT`=""
102 108 Set the supported variant(s) of the keyboard layout(s).
103 109
104 110 ##### `XKB_OPTIONS`=""
105 111 Set extra xkb configuration options.
106 112
107 113 ---
108 114
109 115 #### Networking settings (DHCP):
110 116 This parameter is used to set up networking auto configuration in `/etc/systemd/network/eth.network`. The default location of network configuration files in the Debian `stretch` release was changed to `/lib/systemd/network`.`
111 117
112 #####`ENABLE_DHCP`=true
118 ##### `ENABLE_DHCP`=true
113 119 Set the system to use DHCP. This requires an DHCP server.
114 120
115 121 ---
116 122
117 123 #### Networking settings (static):
118 124 These parameters are used to set up a static networking configuration in `/etc/systemd/network/eth.network`. The following static networking parameters are only supported if `ENABLE_DHCP` was set to `false`. The default location of network configuration files in the Debian `stretch` release was changed to `/lib/systemd/network`.
119 125
120 #####`NET_ADDRESS`=""
126 ##### `NET_ADDRESS`=""
121 127 Set a static IPv4 or IPv6 address and its prefix, separated by "/", eg. "192.169.0.3/24".
122 128
123 #####`NET_GATEWAY`=""
129 ##### `NET_GATEWAY`=""
124 130 Set the IP address for the default gateway.
125 131
126 #####`NET_DNS_1`=""
132 ##### `NET_DNS_1`=""
127 133 Set the IP address for the first DNS server.
128 134
129 #####`NET_DNS_2`=""
135 ##### `NET_DNS_2`=""
130 136 Set the IP address for the second DNS server.
131 137
132 #####`NET_DNS_DOMAINS`=""
138 ##### `NET_DNS_DOMAINS`=""
133 139 Set the default DNS search domains to use for non fully qualified host names.
134 140
135 #####`NET_NTP_1`=""
141 ##### `NET_NTP_1`=""
136 142 Set the IP address for the first NTP server.
137 143
138 #####`NET_NTP_2`=""
144 ##### `NET_NTP_2`=""
139 145 Set the IP address for the second NTP server.
140 146
141 147 ---
142 148
143 149 #### Basic system features:
144 150 ##### `ENABLE_CONSOLE`=true
145 151 Enable serial console interface. Recommended if no monitor or keyboard is connected to the RPi2/3. In case of problems fe. if the network (auto) configuration failed - the serial console can be used to access the system.
146 152
147 153 ##### `ENABLE_I2C`=false
148 154 Enable I2C interface on the RPi2/3. Please check the [RPi2/3 pinout diagrams](http://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins.
149 155
150 156 ##### `ENABLE_SPI`=false
151 157 Enable SPI interface on the RPi2/3. Please check the [RPi2/3 pinout diagrams](http://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins.
152 158
153 159 ##### `ENABLE_IPV6`=true
154 160 Enable IPv6 support. The network interface configuration is managed via systemd-networkd.
155 161
156 162 ##### `ENABLE_SSHD`=true
157 163 Install and enable OpenSSH service. The default configuration of the service doesn't allow `root` to login. Please use the user `pi` instead and `su -` or `sudo` to execute commands as root.
158 164
159 165 ##### `ENABLE_NONFREE`=false
160 166 Allow the installation of non-free Debian packages that do not comply with the DFSG. This is required to install closed-source firmware binary blobs.
161 167
162 168 ##### `ENABLE_WIRELESS`=false
163 169 Download and install the [closed-source firmware binary blob](https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm80211/brcm) that is required to run the internal wireless interface of the Raspberry Pi model `3`. This parameter is ignored if the specified `RPI_MODEL` is not `3`.
164 170
165 171 ##### `ENABLE_RSYSLOG`=true
166 172 If set to false, disable and uninstall rsyslog (so logs will be available only
167 173 in journal files)
168 174
169 175 ##### `ENABLE_SOUND`=true
170 176 Enable sound hardware and install Advanced Linux Sound Architecture.
171 177
172 178 ##### `ENABLE_HWRANDOM`=true
173 179 Enable Hardware Random Number Generator. Strong random numbers are important for most network based communications that use encryption. It's recommended to be enabled.
174 180
175 181 ##### `ENABLE_MINGPU`=false
176 182 Minimize the amount of shared memory reserved for the GPU. It doesn't seem to be possible to fully disable the GPU.
177 183
178 184 ##### `ENABLE_DBUS`=true
179 185 Install and enable D-Bus message bus. Please note that systemd should work without D-bus but it's recommended to be enabled.
180 186
181 187 ##### `ENABLE_XORG`=false
182 188 Install Xorg open-source X Window System.
183 189
184 190 ##### `ENABLE_WM`=""
185 191 Install a user defined window manager for the X Window System. To make sure all X related package dependencies are getting installed `ENABLE_XORG` will automatically get enabled if `ENABLE_WM` is used. The `rpi23-gen-image.sh` script has been tested with the following list of window managers: `blackbox`, `openbox`, `fluxbox`, `jwm`, `dwm`, `xfce4`, `awesome`.
186 192
187 193 ---
188 194
189 195 #### Advanced system features:
190 196 ##### `ENABLE_MINBASE`=false
191 197 Use debootstrap script variant `minbase` which only includes essential packages and apt. This will reduce the disk usage by about 65 MB.
192 198
193 199 ##### `ENABLE_REDUCE`=false
194 200 Reduce the disk space usage by deleting packages and files. See `REDUCE_*` parameters for detailed information.
195 201
196 202 ##### `ENABLE_UBOOT`=false
197 203 Replace the default RPi2/3 second stage bootloader (bootcode.bin) with [U-Boot bootloader](http://git.denx.de/?p=u-boot.git;a=summary). U-Boot can boot images via the network using the BOOTP/TFTP protocol.
198 204
199 205 ##### `UBOOTSRC_DIR`=""
200 206 Path to a directory (`u-boot`) of [U-Boot bootloader sources](http://git.denx.de/?p=u-boot.git;a=summary) that will be copied, configured, build and installed inside the chroot.
201 207
202 208 ##### `ENABLE_FBTURBO`=false
203 209 Install and enable the [hardware accelerated Xorg video driver](https://github.com/ssvb/xf86-video-fbturbo) `fbturbo`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling.
204 210
205 211 ##### `FBTURBOSRC_DIR`=""
206 212 Path to a directory (`xf86-video-fbturbo`) of [hardware accelerated Xorg video driver sources](https://github.com/ssvb/xf86-video-fbturbo) that will be copied, configured, build and installed inside the chroot.
207 213
208 214 ##### `ENABLE_IPTABLES`=false
209 215 Enable iptables IPv4/IPv6 firewall. Simplified ruleset: Allow all outgoing connections. Block all incoming connections except to OpenSSH service.
210 216
211 217 ##### `ENABLE_USER`=true
212 218 Create non-root user with password `USER_PASSWORD`=raspberry. Unless overridden with `USER_NAME`=user, username will be `pi`.
213 219
214 220 ##### `USER_NAME`=pi
215 221 Non-root user to create. Ignored if `ENABLE_USER`=false
216 222
217 223 ##### `ENABLE_ROOT`=false
218 224 Set root user password so root login will be enabled
219 225
220 226 ##### `ENABLE_HARDNET`=false
221 227 Enable IPv4/IPv6 network stack hardening settings.
222 228
223 229 ##### `ENABLE_SPLITFS`=false
224 230 Enable having root partition on an USB drive by creating two image files: one for the `/boot/firmware` mount point, and another for `/`.
225 231
226 232 ##### `CHROOT_SCRIPTS`=""
227 233 Path to a directory with scripts that should be run in the chroot before the image is finally built. Every executable file in this directory is run in lexicographical order.
228 234
229 235 ##### `ENABLE_INITRAMFS`=false
230 236 Create an initramfs that that will be loaded during the Linux startup process. `ENABLE_INITRAMFS` will automatically get enabled if `ENABLE_CRYPTFS`=true. This parameter will be ignored if `BUILD_KERNEL`=false.
231 237
232 238 ##### `ENABLE_IFNAMES`=true
233 239 Enable automatic assignment of predictable, stable network interface names for all local Ethernet, WLAN interfaces. This might create complex and long interface names. This parameter is only supported if the Debian release `stretch` is used.
234 240
235 241 ##### `DISABLE_UNDERVOLT_WARNINGS`=
236 242 Disable RPi2/3 under-voltage warnings and overlays. Setting the parameter to `1` will disable the warning overlay. Setting it to `2` will additionally allow RPi2/3 turbo mode when low-voltage is present.
237 243
238 244 ---
239 245
240 246 #### SSH settings:
241 247 ##### `SSH_ENABLE_ROOT`=false
242 248 Enable password root login via SSH. This may be a security risk with default password, use only in trusted environments. `ENABLE_ROOT` must be set to `true`.
243 249
244 250 ##### `SSH_DISABLE_PASSWORD_AUTH`=false
245 251 Disable password based SSH authentication. Only public key based SSH (v2) authentication will be supported.
246 252
247 253 ##### `SSH_LIMIT_USERS`=false
248 254 Limit the users that are allowed to login via SSH. Only allow user `USER_NAME`=pi and root if `SSH_ENABLE_ROOT`=true to login. This parameter will be ignored if `dropbear` SSH is used (`REDUCE_SSHD`=true).
249 255
250 256 ##### `SSH_ROOT_PUB_KEY`=""
251 257 Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `root`. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported. `ENABLE_ROOT` **and** `SSH_ENABLE_ROOT` must be set to `true`.
252 258
253 259 ##### `SSH_USER_PUB_KEY`=""
254 260 Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `USER_NAME`=pi. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported.
255 261
256 262 ---
257 263
258 264 #### Kernel compilation:
259 265 ##### `BUILD_KERNEL`=false
260 266 Build and install the latest RPi2/3 Linux kernel. Currently only the default RPi2/3 kernel configuration is used. `BUILD_KERNEL`=true will automatically be set if the Raspberry Pi model `3` is used.
261 267
268 ##### `CROSS_COMPILE`="arm-linux-gnueabihf-"
269 This sets the cross compile enviornment for the compiler.
270
271 ##### `KERNEL_ARCH`="arm"
272 This sets the kernel architecture for the compiler.
273
274 ##### `KERNEL_IMAGE`="kernel7.img"
275 Name of the image file in the boot partition.
276
277 ##### `KERNEL_BRANCH`=""
278 Name of the requested branch from the GIT location for the RPi Kernel. Default is using the current default branch from the GIT site.
279
280 ##### `QEMU_BINARY`="/usr/bin/qemu-arm-static"
281 Sets the QEMU enviornment for the Debian archive.
282
283 ##### `KERNEL_DEFCONFIG`="bcm2709_defconfig"
284 Sets the default config for kernel compiling.
285
262 286 ##### `KERNEL_REDUCE`=false
263 287 Reduce the size of the generated kernel by removing unwanted device, network and filesystem drivers (experimental).
264 288
265 289 ##### `KERNEL_THREADS`=1
266 290 Number of parallel kernel building threads. If the parameter is left untouched the script will automatically determine the number of CPU cores to set the number of parallel threads to speed the kernel compilation.
267 291
268 292 ##### `KERNEL_HEADERS`=true
269 293 Install kernel headers with built kernel.
270 294
271 295 ##### `KERNEL_MENUCONFIG`=false
272 296 Start `make menuconfig` interactive menu-driven kernel configuration. The script will continue after `make menuconfig` was terminated.
273 297
274 298 ##### `KERNEL_REMOVESRC`=true
275 299 Remove all kernel sources from the generated OS image after it was built and installed.
276 300
277 301 ##### `KERNELSRC_DIR`=""
278 302 Path to a directory (`linux`) of [RaspberryPi Linux kernel sources](https://github.com/raspberrypi/linux) that will be copied, configured, build and installed inside the chroot.
279 303
280 304 ##### `KERNELSRC_CLEAN`=false
281 305 Clean the existing kernel sources directory `KERNELSRC_DIR` (using `make mrproper`) after it was copied to the chroot and before the compilation of the kernel has started. This parameter will be ignored if no `KERNELSRC_DIR` was specified or if `KERNELSRC_PREBUILT`=true.
282 306
283 307 ##### `KERNELSRC_CONFIG`=true
284 308 Run `make bcm2709_defconfig` (and optional `make menuconfig`) to configure the kernel sources before building. This parameter is automatically set to `true` if no existing kernel sources directory was specified using `KERNELSRC_DIR`. This parameter is ignored if `KERNELSRC_PREBUILT`=true.
285 309
286 310 ##### `KERNELSRC_USRCONFIG`=""
287 311 Copy own config file to kernel `.config`. If `KERNEL_MENUCONFIG`=true then running after copy.
288 312
289 313 ##### `KERNELSRC_PREBUILT`=false
290 314 With this parameter set to true the script expects the existing kernel sources directory to be already successfully cross-compiled. The parameters `KERNELSRC_CLEAN`, `KERNELSRC_CONFIG`, `KERNELSRC_USRCONFIG` and `KERNEL_MENUCONFIG` are ignored and no kernel compilation tasks are performed.
291 315
292 316 ##### `RPI_FIRMWARE_DIR`=""
293 317 The directory (`firmware`) containing a local copy of the firmware from the [RaspberryPi firmware project](https://github.com/raspberrypi/firmware). Default is to download the latest firmware directly from the project.
294 318
295 319 ---
296 320
297 321 #### Reduce disk usage:
298 322 The following list of parameters is ignored if `ENABLE_REDUCE`=false.
299 323
300 324 ##### `REDUCE_APT`=true
301 325 Configure APT to use compressed package repository lists and no package caching files.
302 326
303 327 ##### `REDUCE_DOC`=true
304 328 Remove all doc files (harsh). Configure APT to not include doc files on future `apt-get` package installations.
305 329
306 330 ##### `REDUCE_MAN`=true
307 331 Remove all man pages and info files (harsh). Configure APT to not include man pages on future `apt-get` package installations.
308 332
309 333 ##### `REDUCE_VIM`=false
310 334 Replace `vim-tiny` package by `levee` a tiny vim clone.
311 335
312 336 ##### `REDUCE_BASH`=false
313 337 Remove `bash` package and switch to `dash` shell (experimental).
314 338
315 339 ##### `REDUCE_HWDB`=true
316 340 Remove PCI related hwdb files (experimental).
317 341
318 342 ##### `REDUCE_SSHD`=true
319 343 Replace `openssh-server` with `dropbear`.
320 344
321 345 ##### `REDUCE_LOCALE`=true
322 346 Remove all `locale` translation files.
323 347
324 348 ---
325 349
326 350 #### Encrypted root partition:
327 351 ##### `ENABLE_CRYPTFS`=false
328 352 Enable full system encryption with dm-crypt. Setup a fully LUKS encrypted root partition (aes-xts-plain64:sha512) and generate required initramfs. The /boot directory will not be encrypted. This parameter will be ignored if `BUILD_KERNEL`=false. `ENABLE_CRYPTFS` is experimental. SSH-to-initramfs is currently not supported but will be soon - feel free to help.
329 353
330 354 ##### `CRYPTFS_PASSWORD`=""
331 355 Set password of the encrypted root partition. This parameter is mandatory if `ENABLE_CRYPTFS`=true.
332 356
333 357 ##### `CRYPTFS_MAPPING`="secure"
334 358 Set name of dm-crypt managed device-mapper mapping.
335 359
336 360 ##### `CRYPTFS_CIPHER`="aes-xts-plain64:sha512"
337 361 Set cipher specification string. `aes-xts*` ciphers are strongly recommended.
338 362
339 363 ##### `CRYPTFS_XTSKEYSIZE`=512
340 364 Sets key size in bits. The argument has to be a multiple of 8.
341 365
342 366 ---
343 367
344 368 #### Build settings:
345 369 ##### `BASEDIR`=$(pwd)/images/${RELEASE}
346 370 Set a path to a working directory used by the script to generate an image.
347 371
348 ##### `IMAGE_NAME`=${BASEDIR}/${DATE}-rpi${RPI_MODEL}-${RELEASE}
349 Set a filename for the output file(s). Note: the script will create $IMAGE_NAME.img if `ENABLE_SPLITFS`=false or $IMAGE_NAME-frmw.img and $IMAGE_NAME-root.img if `ENABLE_SPLITFS`=true.
372 ##### `IMAGE_NAME`=${BASEDIR}/${DATE}-${KERNEL_ARCH}-${KERNEL_BRANCH}-rpi${RPI_MODEL}-${RELEASE}-${RELEASE_ARCH}
373 Set a filename for the output file(s). Note: the script will create $IMAGE_NAME.img if `ENABLE_SPLITFS`=false or $IMAGE_NAME-frmw.img and $IMAGE_NAME-root.img if `ENABLE_SPLITFS`=true. Note 2: If the KERNEL_BRANCH is not set, the word "CURRENT" is used.
350 374
351 375 ## Understanding the script
352 376 The functions of this script that are required for the different stages of the bootstrapping are split up into single files located inside the `bootstrap.d` directory. During the bootstrapping every script in this directory gets executed in lexicographical order:
353 377
354 378 | Script | Description |
355 379 | --- | --- |
356 380 | `10-bootstrap.sh` | Debootstrap basic system |
357 381 | `11-apt.sh` | Setup APT repositories |
358 382 | `12-locale.sh` | Setup Locales and keyboard settings |
359 383 | `13-kernel.sh` | Build and install RPi2/3 Kernel |
360 384 | `14-fstab.sh` | Setup fstab and initramfs |
361 385 | `15-rpi-config.sh` | Setup RPi2/3 config and cmdline |
362 386 | `20-networking.sh` | Setup Networking |
363 387 | `21-firewall.sh` | Setup Firewall |
364 388 | `30-security.sh` | Setup Users and Security settings |
365 389 | `31-logging.sh` | Setup Logging |
366 390 | `32-sshd.sh` | Setup SSH and public keys |
367 391 | `41-uboot.sh` | Build and Setup U-Boot |
368 392 | `42-fbturbo.sh` | Build and Setup fbturbo Xorg driver |
369 393 | `50-firstboot.sh` | First boot actions |
370 394 | `99-reduce.sh` | Reduce the disk space usage |
371 395
372 396 All the required configuration files that will be copied to the generated OS image are located inside the `files` directory. It is not recommended to modify these configuration files manually.
373 397
374 398 | Directory | Description |
375 399 | --- | --- |
376 400 | `apt` | APT management configuration files |
377 401 | `boot` | Boot and RPi2/3 configuration files |
378 402 | `dpkg` | Package Manager configuration |
379 403 | `etc` | Configuration files and rc scripts |
380 404 | `firstboot` | Scripts that get executed on first boot |
381 405 | `initramfs` | Initramfs scripts |
382 406 | `iptables` | Firewall configuration files |
383 407 | `locales` | Locales configuration |
384 408 | `modules` | Kernel Modules configuration |
385 409 | `mount` | Fstab configuration |
386 410 | `network` | Networking configuration files |
387 411 | `sysctl.d` | Swapping and Network Hardening configuration |
388 412 | `xorg` | fbturbo Xorg driver configuration |
389 413
390 414 ## Custom packages and scripts
391 415 Debian custom packages, i.e. those not in the debian repositories, can be installed by placing them in the `packages` directory. They are installed immediately after packages from the repositories are installed. Any dependencies listed in the custom packages will be downloaded automatically from the repositories. Do not list these custom packages in `APT_INCLUDES`.
392 416
393 417 Scripts in the custom.d directory will be executed after all other installation is complete but before the image is created.
394 418
395 419 ## Logging of the bootstrapping process
396 420 All information related to the bootstrapping process and the commands executed by the `rpi23-gen-image.sh` script can easily be saved into a logfile. The common shell command `script` can be used for this purpose:
397 421
398 422 ```shell
399 423 script -c 'APT_SERVER=ftp.de.debian.org ./rpi23-gen-image.sh' ./build.log
400 424 ```
401 425
402 426 ## Flashing the image file
403 427 After the image file was successfully created by the `rpi23-gen-image.sh` script it can be copied to the microSD card that will be used by the RPi2/3 computer. This can be performed by using the tools `bmaptool` or `dd`. Using `bmaptool` will probably speed-up the copy process because `bmaptool` copies more wisely than `dd`.
404 428
405 #####Flashing examples:
429 ##### Flashing examples:
406 430 ```shell
407 431 bmaptool copy ./images/jessie/2017-01-23-rpi3-jessie.img /dev/mmcblk0
408 432 dd bs=4M if=./images/jessie/2017-01-23-rpi3-jessie.img of=/dev/mmcblk0
409 433 ```
410 434 If you have set `ENABLE_SPLITFS`, copy the `-frmw` image on the microSD card, then the `-root` one on the USB drive:
411 435 ```shell
412 436 bmaptool copy ./images/jessie/2017-01-23-rpi3-jessie-frmw.img /dev/mmcblk0
413 437 bmaptool copy ./images/jessie/2017-01-23-rpi3-jessie-root.img /dev/sdc
414 438 ```
439 ## Weekly image builds
440 The image files are provided by JRWR'S I/O PORT and are built once a Sunday at midnight UTC!
441 * [Debian Stretch Raspberry Pi2/3 Weekly Image Builds](https://jrwr.io/doku.php?id=projects:debianpi)
415 442
416 443 ## External links and references
417 444 * [Debian worldwide mirror sites](https://www.debian.org/mirror/list)
418 445 * [Debian Raspberry Pi 2 Wiki](https://wiki.debian.org/RaspberryPi2)
419 446 * [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains)
420 447 * [Official Raspberry Pi Firmware on github](https://github.com/raspberrypi/firmware)
421 448 * [Official Raspberry Pi Kernel on github](https://github.com/raspberrypi/linux)
422 449 * [U-BOOT git repository](http://git.denx.de/?p=u-boot.git;a=summary)
423 450 * [Xorg DDX driver fbturbo](https://github.com/ssvb/xf86-video-fbturbo)
424 451 * [RPi3 Wireless interface firmware](https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm80211/brcm)
425 452 * [Collabora RPi2 Kernel precompiled](https://repositories.collabora.co.uk/debian/)
@@ -1,48 +1,47
1 1 #
2 2 # Debootstrap basic system
3 3 #
4 4
5 5 # Load utility functions
6 6 . ./functions.sh
7 7
8 8 VARIANT=""
9 9 COMPONENTS="main"
10 10 EXCLUDES=""
11 11
12 12 # Use non-free Debian packages if needed
13 13 if [ "$ENABLE_NONFREE" = true ] ; then
14 14 COMPONENTS="main,non-free"
15 15 fi
16 16
17 17 # Use minbase bootstrap variant which only includes essential packages
18 18 if [ "$ENABLE_MINBASE" = true ] ; then
19 19 VARIANT="--variant=minbase"
20 20 fi
21 21
22 22 # Exclude packages if required by Debian release
23 23 if [ "$RELEASE" = "stretch" ] || [ "$RELEASE" = "buster" ] ; then
24 24 EXCLUDES="--exclude=init,systemd-sysv"
25 25 fi
26 26
27 27 # Base debootstrap (unpack only)
28 28 http_proxy=${APT_PROXY} debootstrap ${EXCLUDES} --arch="${RELEASE_ARCH}" --foreign ${VARIANT} --components="${COMPONENTS}" --include="${APT_INCLUDES}" "${RELEASE}" "${R}" "http://${APT_SERVER}/debian"
29 29
30 # Copy qemu emulator binary to chroot modified for changes in _apt management in buster
31 #install_exec "${QEMU_BINARY}" "${R}${QEMU_BINARY}"
30 # Copy qemu emulator binary to chroot
32 31 install -m 755 -o root -g root "${QEMU_BINARY}" "${R}${QEMU_BINARY}"
33 32
34 33 # Copy debian-archive-keyring.pgp
35 34 mkdir -p "${R}/usr/share/keyrings"
36 35 install_readonly /usr/share/keyrings/debian-archive-keyring.gpg "${R}/usr/share/keyrings/debian-archive-keyring.gpg"
37 36
38 37 # Complete the bootstrapping process
39 38 chroot_exec /debootstrap/debootstrap --second-stage
40 39
41 40 # Mount required filesystems
42 41 mount -t proc none "${R}/proc"
43 42 mount -t sysfs none "${R}/sys"
44 43
45 44 # Mount pseudo terminal slave if supported by Debian release
46 45 if [ -d "${R}/dev/pts" ] ; then
47 46 mount --bind /dev/pts "${R}/dev/pts"
48 47 fi
@@ -1,52 +1,56
1 1 #
2 2 # Setup APT repositories
3 3 #
4 4
5 5 # Load utility functions
6 6 . ./functions.sh
7 7
8 8 # Install and setup APT proxy configuration
9 9 if [ -z "$APT_PROXY" ] ; then
10 10 install_readonly files/apt/10proxy "${ETC_DIR}/apt/apt.conf.d/10proxy"
11 11 sed -i "s/\"\"/\"${APT_PROXY}\"/" "${ETC_DIR}/apt/apt.conf.d/10proxy"
12 12 fi
13 13
14 14 if [ "$BUILD_KERNEL" = false ] ; then
15 15 # Install APT pinning configuration for flash-kernel package
16 16 install_readonly files/apt/flash-kernel "${ETC_DIR}/apt/preferences.d/flash-kernel"
17 17
18 18 # Install APT sources.list
19 19 install_readonly files/apt/sources.list "${ETC_DIR}/apt/sources.list"
20 20 echo "deb ${COLLABORA_URL} ${RELEASE} rpi2" >> "${ETC_DIR}/apt/sources.list"
21 21
22 22 # Upgrade collabora package index and install collabora keyring
23 23 chroot_exec apt-get -qq -y update
24 24 # Removed --allow-unauthenticated as suggested after modification on _apt privileges
25 25 chroot_exec apt-get -qq -y install collabora-obs-archive-keyring
26 26 else # BUILD_KERNEL=true
27 27 # Install APT sources.list
28 28 install_readonly files/apt/sources.list "${ETC_DIR}/apt/sources.list"
29 29
30 30 # Use specified APT server and release
31 31 sed -i "s/\/ftp.debian.org\//\/${APT_SERVER}\//" "${ETC_DIR}/apt/sources.list"
32 32 sed -i "s/ jessie/ ${RELEASE}/" "${ETC_DIR}/apt/sources.list"
33 33 fi
34 34
35 35 # Allow the installation of non-free Debian packages
36 36 if [ "$ENABLE_NONFREE" = true ] ; then
37 37 sed -i "s/ contrib/ contrib non-free/" "${ETC_DIR}/apt/sources.list"
38 38 fi
39 39
40 40 # Upgrade package index and update all installed packages and changed dependencies
41 41 chroot_exec apt-get -qq -y update
42 42 chroot_exec apt-get -qq -y -u dist-upgrade
43 43
44 if [ "$APT_INCLUDES_LATE" ] ; then
45 chroot_exec apt-get -qq -y install $(echo $APT_INCLUDES_LATE |tr , ' ')
46 fi
47
44 48 if [ -d packages ] ; then
45 49 for package in packages/*.deb ; do
46 50 cp $package ${R}/tmp
47 51 chroot_exec dpkg --unpack /tmp/$(basename $package)
48 52 done
49 53 fi
50 54 chroot_exec apt-get -qq -y -f install
51 55
52 56 chroot_exec apt-get -qq -y check
@@ -1,172 +1,183
1 1 #
2 2 # Build and Setup RPi2/3 Kernel
3 3 #
4 4
5 5 # Load utility functions
6 6 . ./functions.sh
7 7
8 8 # Fetch and build latest raspberry kernel
9 9 if [ "$BUILD_KERNEL" = true ] ; then
10 10 # Setup source directory
11 11 mkdir -p "${R}/usr/src"
12 12
13 13 # Copy existing kernel sources into chroot directory
14 14 if [ -n "$KERNELSRC_DIR" ] && [ -d "$KERNELSRC_DIR" ] ; then
15 15 # Copy kernel sources
16 16 cp -r "${KERNELSRC_DIR}" "${R}/usr/src"
17 17
18 18 # Clean the kernel sources
19 19 if [ "$KERNELSRC_CLEAN" = true ] && [ "$KERNELSRC_PREBUILT" = false ] ; then
20 20 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" mrproper
21 21 fi
22 22 else # KERNELSRC_DIR=""
23 23 # Create temporary directory for kernel sources
24 temp_dir=$(sudo -u nobody mktemp -d)
24 temp_dir=$(as_nobody mktemp -d)
25 25
26 26 # Fetch current RPi2/3 kernel sources
27 sudo -u nobody git -C "${temp_dir}" clone --depth=1 "${KERNEL_URL}"
28
27 if [ -z "${KERNEL_BRANCH}" ] ; then
28 as_nobody -u nobody git -C "${temp_dir}" clone --depth=1 "${KERNEL_URL}"
29 else
30 as_nobody -u nobody git -C "${temp_dir}" clone --depth=1 --branch "${KERNEL_BRANCH}" "${KERNEL_URL}"
31 fi
32
29 33 # Copy downloaded kernel sources
30 34 mv "${temp_dir}/linux" "${R}/usr/src/"
31 35
32 36 # Remove temporary directory for kernel sources
33 37 rm -fr "${temp_dir}"
34 38
35 39 # Set permissions of the kernel sources
36 40 chown -R root:root "${R}/usr/src"
37 41 fi
38 42
39 43 # Calculate optimal number of kernel building threads
40 44 if [ "$KERNEL_THREADS" = "1" ] && [ -r /proc/cpuinfo ] ; then
41 45 KERNEL_THREADS=$(grep -c processor /proc/cpuinfo)
42 46 fi
43 47
44 48 # Configure and build kernel
45 49 if [ "$KERNELSRC_PREBUILT" = false ] ; then
46 50 # Remove device, network and filesystem drivers from kernel configuration
47 51 if [ "$KERNEL_REDUCE" = true ] ; then
48 52 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" "${KERNEL_DEFCONFIG}"
49 53 sed -i\
50 54 -e "s/\(^CONFIG_SND.*\=\).*/\1n/"\
51 55 -e "s/\(^CONFIG_SOUND.*\=\).*/\1n/"\
52 56 -e "s/\(^CONFIG_AC97.*\=\).*/\1n/"\
53 57 -e "s/\(^CONFIG_VIDEO_.*\=\).*/\1n/"\
54 58 -e "s/\(^CONFIG_MEDIA_TUNER.*\=\).*/\1n/"\
55 59 -e "s/\(^CONFIG_DVB.*\=\)[ym]/\1n/"\
56 60 -e "s/\(^CONFIG_REISERFS.*\=\).*/\1n/"\
57 61 -e "s/\(^CONFIG_JFS.*\=\).*/\1n/"\
58 62 -e "s/\(^CONFIG_XFS.*\=\).*/\1n/"\
59 63 -e "s/\(^CONFIG_GFS2.*\=\).*/\1n/"\
60 64 -e "s/\(^CONFIG_OCFS2.*\=\).*/\1n/"\
61 65 -e "s/\(^CONFIG_BTRFS.*\=\).*/\1n/"\
62 66 -e "s/\(^CONFIG_HFS.*\=\).*/\1n/"\
63 67 -e "s/\(^CONFIG_JFFS2.*\=\)[ym]/\1n/"\
64 68 -e "s/\(^CONFIG_UBIFS.*\=\).*/\1n/"\
65 69 -e "s/\(^CONFIG_SQUASHFS.*\=\)[ym]/\1n/"\
66 70 -e "s/\(^CONFIG_W1.*\=\)[ym]/\1n/"\
67 71 -e "s/\(^CONFIG_HAMRADIO.*\=\).*/\1n/"\
68 72 -e "s/\(^CONFIG_CAN.*\=\).*/\1n/"\
69 73 -e "s/\(^CONFIG_IRDA.*\=\).*/\1n/"\
70 74 -e "s/\(^CONFIG_BT_.*\=\).*/\1n/"\
71 75 -e "s/\(^CONFIG_WIMAX.*\=\)[ym]/\1n/"\
72 76 -e "s/\(^CONFIG_6LOWPAN.*\=\).*/\1n/"\
73 77 -e "s/\(^CONFIG_IEEE802154.*\=\).*/\1n/"\
74 78 -e "s/\(^CONFIG_NFC.*\=\).*/\1n/"\
75 79 -e "s/\(^CONFIG_FB_TFT=.*\=\).*/\1n/"\
76 80 -e "s/\(^CONFIG_TOUCHSCREEN.*\=\).*/\1n/"\
77 81 -e "s/\(^CONFIG_USB_GSPCA_.*\=\).*/\1n/"\
78 82 -e "s/\(^CONFIG_DRM.*\=\).*/\1n/"\
79 83 "${KERNEL_DIR}/.config"
80 84 fi
81 85
82 86 if [ "$KERNELSRC_CONFIG" = true ] ; then
83 87 # Load default raspberry kernel configuration
84 88 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" "${KERNEL_DEFCONFIG}"
85 89
86 90 if [ ! -z "$KERNELSRC_USRCONFIG" ] ; then
87 91 cp $KERNELSRC_USRCONFIG ${KERNEL_DIR}/.config
88 92 fi
89 93
90 94 # Start menu-driven kernel configuration (interactive)
91 95 if [ "$KERNEL_MENUCONFIG" = true ] ; then
92 96 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" menuconfig
93 97 fi
94 98 fi
95 99
96 100 # Cross compile kernel and modules
97 make -C "${KERNEL_DIR}" -j${KERNEL_THREADS} ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" zImage modules dtbs
101 make -C "${KERNEL_DIR}" -j${KERNEL_THREADS} ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" "${KERNEL_BIN_IMAGE}" modules dtbs
98 102 fi
99 103
100 104 # Check if kernel compilation was successful
101 if [ ! -r "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/zImage" ] ; then
102 echo "error: kernel compilation failed! (zImage not found)"
105 if [ ! -r "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/${KERNEL_BIN_IMAGE}" ] ; then
106 echo "error: kernel compilation failed! (kernel image not found)"
103 107 cleanup
104 108 exit 1
105 109 fi
106 110
107 111 # Install kernel modules
108 112 if [ "$ENABLE_REDUCE" = true ] ; then
109 113 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=../../.. modules_install
110 114 else
111 115 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" INSTALL_MOD_PATH=../../.. modules_install
112 116
113 117 # Install kernel firmware
114 118 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" INSTALL_FW_PATH=../../../lib firmware_install
115 119 fi
116 120
117 121 # Install kernel headers
118 122 if [ "$KERNEL_HEADERS" = true ] && [ "$KERNEL_REDUCE" = false ] ; then
119 123 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" INSTALL_HDR_PATH=../.. headers_install
120 124 fi
121 125
122 126 # Prepare boot (firmware) directory
123 127 mkdir "${BOOT_DIR}"
124 128
125 129 # Get kernel release version
126 130 KERNEL_VERSION=`cat "${KERNEL_DIR}/include/config/kernel.release"`
127 131
128 132 # Copy kernel configuration file to the boot directory
129 133 install_readonly "${KERNEL_DIR}/.config" "${R}/boot/config-${KERNEL_VERSION}"
130 134
131 135 # Copy dts and dtb device tree sources and binaries
132 136 mkdir "${BOOT_DIR}/overlays"
133 install_readonly "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/dts/"*.dtb "${BOOT_DIR}/"
137
138 # Ensure the proper .dtb is located
139 if [ "$KERNEL_ARCH" = "arm" ] ; then
140 install_readonly "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/dts/"*.dtb "${BOOT_DIR}/"
141 else
142 install_readonly "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/dts/broadcom/"*.dtb "${BOOT_DIR}/"
143 fi
144
134 145 install_readonly "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/dts/overlays/"*.dtb* "${BOOT_DIR}/overlays/"
135 146 install_readonly "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/dts/overlays/README" "${BOOT_DIR}/overlays/README"
136 147
137 148 if [ "$ENABLE_UBOOT" = false ] ; then
138 # Convert and copy zImage kernel to the boot directory
139 "${KERNEL_DIR}/scripts/mkknlimg" "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/zImage" "${BOOT_DIR}/${KERNEL_IMAGE}"
149 # Convert and copy kernel image to the boot directory
150 "${KERNEL_DIR}/scripts/mkknlimg" "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/${KERNEL_BIN_IMAGE}" "${BOOT_DIR}/${KERNEL_IMAGE}"
140 151 else
141 # Copy zImage kernel to the boot directory
142 install_readonly "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/zImage" "${BOOT_DIR}/${KERNEL_IMAGE}"
152 # Copy kernel image to the boot directory
153 install_readonly "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/${KERNEL_BIN_IMAGE}" "${BOOT_DIR}/${KERNEL_IMAGE}"
143 154 fi
144 155
145 156 # Remove kernel sources
146 157 if [ "$KERNEL_REMOVESRC" = true ] ; then
147 158 rm -fr "${KERNEL_DIR}"
148 159 else
149 160 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" modules_prepare
150 161
151 162 # Create symlinks for kernel modules
152 ln -sf "${KERNEL_DIR}" "${R}/lib/modules/${KERNEL_VERSION}/build"
153 ln -sf "${KERNEL_DIR}" "${R}/lib/modules/${KERNEL_VERSION}/source"
163 chroot_exec ln -sf /usr/src/linux "/lib/modules/${KERNEL_VERSION}/build"
164 chroot_exec ln -sf /usr/src/linux "/lib/modules/${KERNEL_VERSION}/source"
154 165 fi
155 166
156 167 else # BUILD_KERNEL=false
157 168 # Kernel installation
158 169 chroot_exec apt-get -qq -y --no-install-recommends install linux-image-"${COLLABORA_KERNEL}" raspberrypi-bootloader-nokernel
159 170
160 171 # Install flash-kernel last so it doesn't try (and fail) to detect the platform in the chroot
161 172 chroot_exec apt-get -qq -y install flash-kernel
162 173
163 174 # Check if kernel installation was successful
164 175 VMLINUZ="$(ls -1 ${R}/boot/vmlinuz-* | sort | tail -n 1)"
165 176 if [ -z "$VMLINUZ" ] ; then
166 177 echo "error: kernel installation failed! (/boot/vmlinuz-* not found)"
167 178 cleanup
168 179 exit 1
169 180 fi
170 181 # Copy vmlinuz kernel to the boot directory
171 182 install_readonly "${VMLINUZ}" "${BOOT_DIR}/${KERNEL_IMAGE}"
172 183 fi
@@ -1,151 +1,151
1 1 #
2 2 # Setup RPi2/3 config and cmdline
3 3 #
4 4
5 5 # Load utility functions
6 6 . ./functions.sh
7 7
8 8 if [ "$BUILD_KERNEL" = true ] ; then
9 9 if [ -n "$RPI_FIRMWARE_DIR" ] && [ -d "$RPI_FIRMWARE_DIR" ] ; then
10 10 # Install boot binaries from local directory
11 11 cp ${RPI_FIRMWARE_DIR}/boot/bootcode.bin ${BOOT_DIR}/bootcode.bin
12 12 cp ${RPI_FIRMWARE_DIR}/boot/fixup.dat ${BOOT_DIR}/fixup.dat
13 13 cp ${RPI_FIRMWARE_DIR}/boot/fixup_cd.dat ${BOOT_DIR}/fixup_cd.dat
14 14 cp ${RPI_FIRMWARE_DIR}/boot/fixup_x.dat ${BOOT_DIR}/fixup_x.dat
15 15 cp ${RPI_FIRMWARE_DIR}/boot/start.elf ${BOOT_DIR}/start.elf
16 16 cp ${RPI_FIRMWARE_DIR}/boot/start_cd.elf ${BOOT_DIR}/start_cd.elf
17 17 cp ${RPI_FIRMWARE_DIR}/boot/start_x.elf ${BOOT_DIR}/start_x.elf
18 18 else
19 19 # Create temporary directory for boot binaries
20 temp_dir=$(sudo -u nobody mktemp -d)
20 temp_dir=$(as_nobody mktemp -d)
21 21
22 22 # Install latest boot binaries from raspberry/firmware github
23 sudo -u nobody wget -q -O "${temp_dir}/bootcode.bin" "${FIRMWARE_URL}/bootcode.bin"
24 sudo -u nobody wget -q -O "${temp_dir}/fixup.dat" "${FIRMWARE_URL}/fixup.dat"
25 sudo -u nobody wget -q -O "${temp_dir}/fixup_cd.dat" "${FIRMWARE_URL}/fixup_cd.dat"
26 sudo -u nobody wget -q -O "${temp_dir}/fixup_x.dat" "${FIRMWARE_URL}/fixup_x.dat"
27 sudo -u nobody wget -q -O "${temp_dir}/start.elf" "${FIRMWARE_URL}/start.elf"
28 sudo -u nobody wget -q -O "${temp_dir}/start_cd.elf" "${FIRMWARE_URL}/start_cd.elf"
29 sudo -u nobody wget -q -O "${temp_dir}/start_x.elf" "${FIRMWARE_URL}/start_x.elf"
23 as_nobody wget -q -O "${temp_dir}/bootcode.bin" "${FIRMWARE_URL}/bootcode.bin"
24 as_nobody wget -q -O "${temp_dir}/fixup.dat" "${FIRMWARE_URL}/fixup.dat"
25 as_nobody wget -q -O "${temp_dir}/fixup_cd.dat" "${FIRMWARE_URL}/fixup_cd.dat"
26 as_nobody wget -q -O "${temp_dir}/fixup_x.dat" "${FIRMWARE_URL}/fixup_x.dat"
27 as_nobody wget -q -O "${temp_dir}/start.elf" "${FIRMWARE_URL}/start.elf"
28 as_nobody wget -q -O "${temp_dir}/start_cd.elf" "${FIRMWARE_URL}/start_cd.elf"
29 as_nobody wget -q -O "${temp_dir}/start_x.elf" "${FIRMWARE_URL}/start_x.elf"
30 30
31 31 # Move downloaded boot binaries
32 32 mv "${temp_dir}/"* "${BOOT_DIR}/"
33 33
34 34 # Remove temporary directory for boot binaries
35 35 rm -fr "${temp_dir}"
36 36
37 37 # Set permissions of the boot binaries
38 38 chown -R root:root "${BOOT_DIR}"
39 39 chmod -R 600 "${BOOT_DIR}"
40 40 fi
41 41 fi
42 42
43 43 # Setup firmware boot cmdline
44 44 if [ "$ENABLE_SPLITFS" = true ] ; then
45 45 CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda1 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline rootwait console=tty1"
46 46 else
47 47 CMDLINE="dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline rootwait console=tty1"
48 48 fi
49 49
50 50 # Add encrypted root partition to cmdline.txt
51 51 if [ "$ENABLE_CRYPTFS" = true ] ; then
52 52 if [ "$ENABLE_SPLITFS" = true ] ; then
53 53 CMDLINE=$(echo ${CMDLINE} | sed "s/sda1/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda1:${CRYPTFS_MAPPING}/")
54 54 else
55 55 CMDLINE=$(echo ${CMDLINE} | sed "s/mmcblk0p2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/mmcblk0p2:${CRYPTFS_MAPPING}/")
56 56 fi
57 57 fi
58 58
59 59 # Add serial console support
60 60 if [ "$ENABLE_CONSOLE" = true ] ; then
61 61 CMDLINE="${CMDLINE} console=ttyAMA0,115200 kgdboc=ttyAMA0,115200"
62 62 fi
63 63
64 64 # Remove IPv6 networking support
65 65 if [ "$ENABLE_IPV6" = false ] ; then
66 66 CMDLINE="${CMDLINE} ipv6.disable=1"
67 67 fi
68 68
69 69 # Automatically assign predictable network interface names
70 70 if [ "$ENABLE_IFNAMES" = false ] ; then
71 71 CMDLINE="${CMDLINE} net.ifnames=0"
72 72 else
73 73 CMDLINE="${CMDLINE} net.ifnames=1"
74 74 fi
75 75
76 76 # Set init to systemd if required by Debian release stretch or buster
77 77 if [ "$RELEASE" = "stretch" ] || [ "$RELEASE" = "buster" ] ; then
78 78 CMDLINE="${CMDLINE} init=/bin/systemd"
79 79 fi
80 80
81 81 # Install firmware boot cmdline
82 82 echo "${CMDLINE}" > "${BOOT_DIR}/cmdline.txt"
83 83
84 84 # Install firmware config
85 85 install_readonly files/boot/config.txt "${BOOT_DIR}/config.txt"
86 86
87 87 # Setup minimal GPU memory allocation size: 16MB (no X)
88 88 if [ "$ENABLE_MINGPU" = true ] ; then
89 89 echo "gpu_mem=16" >> "${BOOT_DIR}/config.txt"
90 90 fi
91 91
92 92 # Setup boot with initramfs
93 93 if [ "$ENABLE_INITRAMFS" = true ] ; then
94 94 echo "initramfs initramfs-${KERNEL_VERSION} followkernel" >> "${BOOT_DIR}/config.txt"
95 95 fi
96 96
97 97 # Disable RPi3 Bluetooth and restore ttyAMA0 serial device
98 98 if [ "$RPI_MODEL" = 3 ] ; then
99 99 if [ "$ENABLE_CONSOLE" = true ] && [ "$ENABLE_UBOOT" = false ] ; then
100 100 echo "dtoverlay=pi3-disable-bt" >> "${BOOT_DIR}/config.txt"
101 101 echo "enable_uart=1" >> "${BOOT_DIR}/config.txt"
102 102 fi
103 103 fi
104 104
105 105 # Create firmware configuration and cmdline symlinks
106 106 ln -sf firmware/config.txt "${R}/boot/config.txt"
107 107 ln -sf firmware/cmdline.txt "${R}/boot/cmdline.txt"
108 108
109 109 # Install and setup kernel modules to load at boot
110 110 mkdir -p "${R}/lib/modules-load.d/"
111 111 install_readonly files/modules/rpi2.conf "${R}/lib/modules-load.d/rpi2.conf"
112 112
113 113 # Load hardware random module at boot
114 114 if [ "$ENABLE_HWRANDOM" = true ] && [ "$BUILD_KERNEL" = false ] ; then
115 115 sed -i "s/^# bcm2708_rng/bcm2708_rng/" "${R}/lib/modules-load.d/rpi2.conf"
116 116 fi
117 117
118 118 # Load sound module at boot
119 119 if [ "$ENABLE_SOUND" = true ] ; then
120 120 sed -i "s/^# snd_bcm2835/snd_bcm2835/" "${R}/lib/modules-load.d/rpi2.conf"
121 121 else
122 122 echo "dtparam=audio=off" >> "${BOOT_DIR}/config.txt"
123 123 fi
124 124
125 125 # Enable I2C interface
126 126 if [ "$ENABLE_I2C" = true ] ; then
127 127 echo "dtparam=i2c_arm=on" >> "${BOOT_DIR}/config.txt"
128 128 sed -i "s/^# i2c-bcm2708/i2c-bcm2708/" "${R}/lib/modules-load.d/rpi2.conf"
129 129 sed -i "s/^# i2c-dev/i2c-dev/" "${R}/lib/modules-load.d/rpi2.conf"
130 130 fi
131 131
132 132 # Enable SPI interface
133 133 if [ "$ENABLE_SPI" = true ] ; then
134 134 echo "dtparam=spi=on" >> "${BOOT_DIR}/config.txt"
135 135 echo "spi-bcm2708" >> "${R}/lib/modules-load.d/rpi2.conf"
136 136 if [ "$RPI_MODEL" = 3 ] ; then
137 137 sed -i "s/spi-bcm2708/spi-bcm2835/" "${R}/lib/modules-load.d/rpi2.conf"
138 138 fi
139 139 fi
140 140
141 141 # Disable RPi2/3 under-voltage warnings
142 142 if [ ! -z "$DISABLE_UNDERVOLT_WARNINGS" ] ; then
143 143 echo "avoid_warnings=${DISABLE_UNDERVOLT_WARNINGS}" >> "${BOOT_DIR}/config.txt"
144 144 fi
145 145
146 146 # Install kernel modules blacklist
147 147 mkdir -p "${ETC_DIR}/modprobe.d/"
148 148 install_readonly files/modules/raspi-blacklist.conf "${ETC_DIR}/modprobe.d/raspi-blacklist.conf"
149 149
150 150 # Install sysctl.d configuration files
151 151 install_readonly files/sysctl.d/81-rpi-vm.conf "${ETC_DIR}/sysctl.d/81-rpi-vm.conf"
@@ -1,107 +1,107
1 1 #
2 2 # Setup Networking
3 3 #
4 4
5 5 # Load utility functions
6 6 . ./functions.sh
7 7
8 8 # Install and setup hostname
9 9 install_readonly files/network/hostname "${ETC_DIR}/hostname"
10 10 sed -i "s/^rpi2-jessie/${HOSTNAME}/" "${ETC_DIR}/hostname"
11 11
12 12 # Install and setup hosts
13 13 install_readonly files/network/hosts "${ETC_DIR}/hosts"
14 14 sed -i "s/rpi2-jessie/${HOSTNAME}/" "${ETC_DIR}/hosts"
15 15
16 16 # Setup hostname entry with static IP
17 17 if [ "$NET_ADDRESS" != "" ] ; then
18 18 NET_IP=$(echo "${NET_ADDRESS}" | cut -f 1 -d'/')
19 19 sed -i "s/^127.0.1.1/${NET_IP}/" "${ETC_DIR}/hosts"
20 20 fi
21 21
22 22 # Remove IPv6 hosts
23 23 if [ "$ENABLE_IPV6" = false ] ; then
24 24 sed -i -e "/::[1-9]/d" -e "/^$/d" "${ETC_DIR}/hosts"
25 25 fi
26 26
27 27 # Install hint about network configuration
28 28 install_readonly files/network/interfaces "${ETC_DIR}/network/interfaces"
29 29
30 30 # Install configuration for interface eth0
31 31 install_readonly files/network/eth.network "${ETC_DIR}/systemd/network/eth.network"
32 32
33 33 if [ "$ENABLE_DHCP" = true ] ; then
34 34 # Enable DHCP configuration for interface eth0
35 35 sed -i -e "s/DHCP=.*/DHCP=yes/" -e "/DHCP/q" "${ETC_DIR}/systemd/network/eth.network"
36 36
37 37 # Set DHCP configuration to IPv4 only
38 38 if [ "$ENABLE_IPV6" = false ] ; then
39 39 sed -i "s/DHCP=.*/DHCP=v4/" "${ETC_DIR}/systemd/network/eth.network"
40 40 fi
41 41
42 42 else # ENABLE_DHCP=false
43 43 # Set static network configuration for interface eth0
44 44 sed -i\
45 45 -e "s|DHCP=.*|DHCP=no|"\
46 46 -e "s|Address=\$|Address=${NET_ADDRESS}|"\
47 47 -e "s|Gateway=\$|Gateway=${NET_GATEWAY}|"\
48 48 -e "0,/DNS=\$/ s|DNS=\$|DNS=${NET_DNS_1}|"\
49 49 -e "0,/DNS=\$/ s|DNS=\$|DNS=${NET_DNS_2}|"\
50 50 -e "s|Domains=\$|Domains=${NET_DNS_DOMAINS}|"\
51 51 -e "0,/NTP=\$/ s|NTP=\$|NTP=${NET_NTP_1}|"\
52 52 -e "0,/NTP=\$/ s|NTP=\$|NTP=${NET_NTP_2}|"\
53 53 "${ETC_DIR}/systemd/network/eth.network"
54 54 fi
55 55
56 56 # Remove empty settings from network configuration
57 57 sed -i "/.*=\$/d" "${ETC_DIR}/systemd/network/eth.network"
58 58
59 59 # Move systemd network configuration if required by Debian release stretch or buster
60 60 if [ "$RELEASE" = "stretch" ] || [ "$RELEASE" = "buster" ] ; then
61 61 mv -v "${ETC_DIR}/systemd/network/eth.network" "${LIB_DIR}/systemd/network/10-eth.network"
62 62 rm -fr "${ETC_DIR}/systemd/network"
63 63 fi
64 64
65 65 # Enable systemd-networkd service
66 66 chroot_exec systemctl enable systemd-networkd
67 67
68 68 # Install host.conf resolver configuration
69 69 install_readonly files/network/host.conf "${ETC_DIR}/host.conf"
70 70
71 71 # Enable network stack hardening
72 72 if [ "$ENABLE_HARDNET" = true ] ; then
73 73 # Install sysctl.d configuration files
74 74 install_readonly files/sysctl.d/82-rpi-net-hardening.conf "${ETC_DIR}/sysctl.d/82-rpi-net-hardening.conf"
75 75
76 76 # Setup resolver warnings about spoofed addresses
77 77 sed -i "s/^# spoof warn/spoof warn/" "${ETC_DIR}/host.conf"
78 78 fi
79 79
80 80 # Enable time sync
81 81 if [ "NET_NTP_1" != "" ] ; then
82 82 chroot_exec systemctl enable systemd-timesyncd.service
83 83 fi
84 84
85 85 # Download the firmware binary blob required to use the RPi3 wireless interface
86 86 if [ "$ENABLE_WIRELESS" = true ] ; then
87 87 if [ ! -d ${WLAN_FIRMWARE_DIR} ] ; then
88 88 mkdir -p ${WLAN_FIRMWARE_DIR}
89 89 fi
90 90
91 91 # Create temporary directory for firmware binary blob
92 temp_dir=$(sudo -u nobody mktemp -d)
92 temp_dir=$(as_nobody mktemp -d)
93 93
94 94 # Fetch firmware binary blob
95 sudo -u nobody wget -q -O "${temp_dir}/brcmfmac43430-sdio.bin" "${WLAN_FIRMWARE_URL}/brcmfmac43430-sdio.bin"
96 sudo -u nobody wget -q -O "${temp_dir}/brcmfmac43430-sdio.txt" "${WLAN_FIRMWARE_URL}/brcmfmac43430-sdio.txt"
95 as_nobody wget -q -O "${temp_dir}/brcmfmac43430-sdio.bin" "${WLAN_FIRMWARE_URL}/brcmfmac43430-sdio.bin"
96 as_nobody wget -q -O "${temp_dir}/brcmfmac43430-sdio.txt" "${WLAN_FIRMWARE_URL}/brcmfmac43430-sdio.txt"
97 97
98 98 # Move downloaded firmware binary blob
99 99 mv "${temp_dir}/brcmfmac43430-sdio."* "${WLAN_FIRMWARE_DIR}/"
100 100
101 101 # Remove temporary directory for firmware binary blob
102 102 rm -fr "${temp_dir}"
103 103
104 104 # Set permissions of the firmware binary blob
105 105 chown root:root "${WLAN_FIRMWARE_DIR}/brcmfmac43430-sdio."*
106 106 chmod 600 "${WLAN_FIRMWARE_DIR}/brcmfmac43430-sdio."*
107 107 fi
@@ -1,83 +1,83
1 1 #
2 2 # Build and Setup U-Boot
3 3 #
4 4
5 5 # Load utility functions
6 6 . ./functions.sh
7 7
8 8 # Fetch and build U-Boot bootloader
9 9 if [ "$ENABLE_UBOOT" = true ] ; then
10 10 # Install c/c++ build environment inside the chroot
11 11 chroot_install_cc
12 12
13 13 # Copy existing U-Boot sources into chroot directory
14 14 if [ -n "$UBOOTSRC_DIR" ] && [ -d "$UBOOTSRC_DIR" ] ; then
15 15 # Copy local U-Boot sources
16 16 cp -r "${UBOOTSRC_DIR}" "${R}/tmp"
17 17 else
18 18 # Create temporary directory for U-Boot sources
19 temp_dir=$(sudo -u nobody mktemp -d)
19 temp_dir=$(as_nobody mktemp -d)
20 20
21 21 # Fetch U-Boot sources
22 sudo -u nobody git -C "${temp_dir}" clone "${UBOOT_URL}"
22 as_nobody git -C "${temp_dir}" clone "${UBOOT_URL}"
23 23
24 24 # Copy downloaded U-Boot sources
25 25 mv "${temp_dir}/u-boot" "${R}/tmp/"
26 26
27 27 # Set permissions of the U-Boot sources
28 28 chown -R root:root "${R}/tmp/u-boot"
29 29
30 30 # Remove temporary directory for U-Boot sources
31 31 rm -fr "${temp_dir}"
32 32 fi
33 33
34 34 # Build and install U-Boot inside chroot
35 35 chroot_exec make -j${KERNEL_THREADS} -C /tmp/u-boot/ ${UBOOT_CONFIG} all
36 36
37 37 # Copy compiled bootloader binary and set config.txt to load it
38 38 install_exec "${R}/tmp/u-boot/tools/mkimage" "${R}/usr/sbin/mkimage"
39 39 install_readonly "${R}/tmp/u-boot/u-boot.bin" "${BOOT_DIR}/u-boot.bin"
40 40 printf "\n# boot u-boot kernel\nkernel=u-boot.bin\n" >> "${BOOT_DIR}/config.txt"
41 41
42 42 # Install and setup U-Boot command file
43 43 install_readonly files/boot/uboot.mkimage "${BOOT_DIR}/uboot.mkimage"
44 44 printf "# Set the kernel boot command line\nsetenv bootargs \"earlyprintk ${CMDLINE}\"\n\n$(cat ${BOOT_DIR}/uboot.mkimage)" > "${BOOT_DIR}/uboot.mkimage"
45 45
46 46 if [ "$ENABLE_INITRAMFS" = true ] ; then
47 47 # Convert generated initramfs for U-Boot using mkimage
48 48 chroot_exec /usr/sbin/mkimage -A "${KERNEL_ARCH}" -T ramdisk -C none -n "initramfs-${KERNEL_VERSION}" -d "/boot/firmware/initramfs-${KERNEL_VERSION}" "/boot/firmware/initramfs-${KERNEL_VERSION}.uboot"
49 49
50 50 # Remove original initramfs file
51 51 rm -f "${BOOT_DIR}/initramfs-${KERNEL_VERSION}"
52 52
53 53 # Configure U-Boot to load generated initramfs
54 54 printf "# Set initramfs file\nsetenv initramfs initramfs-${KERNEL_VERSION}.uboot\n\n$(cat ${BOOT_DIR}/uboot.mkimage)" > "${BOOT_DIR}/uboot.mkimage"
55 55 printf "\nbootz \${kernel_addr_r} \${ramdisk_addr_r} \${fdt_addr_r}" >> "${BOOT_DIR}/uboot.mkimage"
56 56 else # ENABLE_INITRAMFS=false
57 57 # Remove initramfs from U-Boot mkfile
58 58 sed -i '/.*initramfs.*/d' "${BOOT_DIR}/uboot.mkimage"
59 59
60 60 if [ "$BUILD_KERNEL" = false ] ; then
61 61 # Remove dtbfile from U-Boot mkfile
62 62 sed -i '/.*dtbfile.*/d' "${BOOT_DIR}/uboot.mkimage"
63 63 printf "\nbootz \${kernel_addr_r}" >> "${BOOT_DIR}/uboot.mkimage"
64 64 else
65 65 printf "\nbootz \${kernel_addr_r} - \${fdt_addr_r}" >> "${BOOT_DIR}/uboot.mkimage"
66 66 fi
67 67 fi
68 68
69 69 # Set mkfile to use the correct dtb file
70 70 sed -i "s/^\(setenv dtbfile \).*/\1${DTB_FILE}/" "${BOOT_DIR}/uboot.mkimage"
71 71
72 72 # Set mkfile to use kernel image
73 73 sed -i "s/^\(fatload mmc 0:1 \${kernel_addr_r} \).*/\1${KERNEL_IMAGE}/" "${BOOT_DIR}/uboot.mkimage"
74 74
75 75 # Remove all leading blank lines
76 76 sed -i "/./,\$!d" "${BOOT_DIR}/uboot.mkimage"
77 77
78 78 # Generate U-Boot bootloader image
79 79 chroot_exec /usr/sbin/mkimage -A "${KERNEL_ARCH}" -O linux -T script -C none -a 0x00000000 -e 0x00000000 -n "RPi${RPI_MODEL}" -d /boot/firmware/uboot.mkimage /boot/firmware/boot.scr
80 80
81 81 # Remove U-Boot sources
82 82 rm -fr "${R}/tmp/u-boot"
83 83 fi
@@ -1,49 +1,49
1 1 #
2 2 # Build and Setup fbturbo Xorg driver
3 3 #
4 4
5 5 # Load utility functions
6 6 . ./functions.sh
7 7
8 8 if [ "$ENABLE_FBTURBO" = true ] ; then
9 9 # Install c/c++ build environment inside the chroot
10 10 chroot_install_cc
11 11
12 12 # Copy existing fbturbo sources into chroot directory
13 13 if [ -n "$FBTURBOSRC_DIR" ] && [ -d "$FBTURBOSRC_DIR" ] ; then
14 14 # Copy local fbturbo sources
15 15 cp -r "${FBTURBOSRC_DIR}" "${R}/tmp"
16 16 else
17 17 # Create temporary directory for fbturbo sources
18 temp_dir=$(sudo -u nobody mktemp -d)
18 temp_dir=$(as_nobody mktemp -d)
19 19
20 20 # Fetch fbturbo sources
21 sudo -u nobody git -C "${temp_dir}" clone "${FBTURBO_URL}"
21 as_nobody git -C "${temp_dir}" clone "${FBTURBO_URL}"
22 22
23 23 # Move downloaded fbturbo sources
24 24 mv "${temp_dir}/xf86-video-fbturbo" "${R}/tmp/"
25 25
26 26 # Remove temporary directory for fbturbo sources
27 27 rm -fr "${temp_dir}"
28 28 fi
29 29
30 30 # Install Xorg build dependencies
31 31 if [ "$RELEASE" = "jessie" ] || [ "$RELEASE" = "stretch" ] || [ "$RELEASE" = "buster" ] ; then
32 32 chroot_exec apt-get -q -y --no-install-recommends install xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev
33 33 fi
34 34
35 35 # Build and install fbturbo driver inside chroot
36 36 chroot_exec /bin/bash -x <<'EOF'
37 37 cd /tmp/xf86-video-fbturbo
38 38 autoreconf -vi
39 39 ./configure --prefix=/usr
40 40 make
41 41 make install
42 42 EOF
43 43
44 44 # Install fbturbo driver Xorg configuration
45 45 install_readonly files/xorg/99-fbturbo.conf "${R}/usr/share/X11/xorg.conf.d/99-fbturbo.conf"
46 46
47 47 # Remove Xorg build dependencies
48 48 chroot_exec apt-get -qq -y --auto-remove purge xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev
49 49 fi
@@ -1,74 +1,79
1 1 # This file contains utility functions used by rpi23-gen-image.sh
2 2
3 3 cleanup (){
4 4 set +x
5 5 set +e
6 6
7 7 # Identify and kill all processes still using files
8 8 echo "killing processes using mount point ..."
9 9 fuser -k "${R}"
10 10 sleep 3
11 11 fuser -9 -k -v "${R}"
12 12
13 13 # Clean up temporary .password file
14 14 if [ -r ".password" ] ; then
15 15 shred -zu .password
16 16 fi
17 17
18 18 # Clean up all temporary mount points
19 19 echo "removing temporary mount points ..."
20 20 umount -l "${R}/proc" 2> /dev/null
21 21 umount -l "${R}/sys" 2> /dev/null
22 22 umount -l "${R}/dev/pts" 2> /dev/null
23 23 umount "$BUILDDIR/mount/boot/firmware" 2> /dev/null
24 24 umount "$BUILDDIR/mount" 2> /dev/null
25 25 cryptsetup close "${CRYPTFS_MAPPING}" 2> /dev/null
26 26 losetup -d "$ROOT_LOOP" 2> /dev/null
27 27 losetup -d "$FRMW_LOOP" 2> /dev/null
28 28 trap - 0 1 2 3 6
29 29 }
30 30
31 31 chroot_exec() {
32 32 # Exec command in chroot
33 33 LANG=C LC_ALL=C DEBIAN_FRONTEND=noninteractive chroot ${R} $*
34 34 }
35 35
36 as_nobody() {
37 # Exec command as user nobody
38 sudo -E -u nobody LANG=C LC_ALL=C $*
39 }
40
36 41 install_readonly() {
37 42 # Install file with user read-only permissions
38 43 install -o root -g root -m 644 $*
39 44 }
40 45
41 46 install_exec() {
42 47 # Install file with root exec permissions
43 48 install -o root -g root -m 744 $*
44 49 }
45 50
46 51 use_template () {
47 52 # Test if configuration template file exists
48 53 if [ ! -r "./templates/${CONFIG_TEMPLATE}" ] ; then
49 54 echo "error: configuration template ${CONFIG_TEMPLATE} not found"
50 55 exit 1
51 56 fi
52 57
53 58 # Load template configuration parameters
54 59 . "./templates/${CONFIG_TEMPLATE}"
55 60 }
56 61
57 62 chroot_install_cc() {
58 63 # Install c/c++ build environment inside the chroot
59 64 if [ -z "${COMPILER_PACKAGES}" ] ; then
60 65 COMPILER_PACKAGES=$(chroot_exec apt-get -s install g++ make bc | grep "^Inst " | awk -v ORS=" " '{ print $2 }')
61 66
62 67 if [ "$RELEASE" = "jessie" ] || [ "$RELEASE" = "stretch" ] || [ "$RELEASE" = "buster" ] ; then
63 68 chroot_exec apt-get -q -y --no-install-recommends install ${COMPILER_PACKAGES}
64 69 fi
65 70 fi
66 71 }
67 72
68 73 chroot_remove_cc() {
69 74 # Remove c/c++ build environment from the chroot
70 75 if [ ! -z "${COMPILER_PACKAGES}" ] ; then
71 76 chroot_exec apt-get -qq -y --auto-remove purge ${COMPILER_PACKAGES}
72 77 COMPILER_PACKAGES=""
73 78 fi
74 79 }
@@ -1,629 +1,640
1 1 #!/bin/sh
2 2
3 3 ########################################################################
4 4 # rpi23-gen-image.sh 2015-2017
5 5 #
6 6 # Advanced Debian "jessie" and "stretch" bootstrap script for RPi2/3
7 7 #
8 8 # This program is free software; you can redistribute it and/or
9 9 # modify it under the terms of the GNU General Public License
10 10 # as published by the Free Software Foundation; either version 2
11 11 # of the License, or (at your option) any later version.
12 12 #
13 13 # Copyright (C) 2015 Jan Wagner <mail@jwagner.eu>
14 14 #
15 15 # Big thanks for patches and enhancements by 10+ github contributors!
16 16 ########################################################################
17 17
18 18 # Are we running as root?
19 19 if [ "$(id -u)" -ne "0" ] ; then
20 20 echo "error: this script must be executed with root privileges!"
21 21 exit 1
22 22 fi
23 23
24 24 # Check if ./functions.sh script exists
25 25 if [ ! -r "./functions.sh" ] ; then
26 26 echo "error: './functions.sh' required script not found!"
27 27 exit 1
28 28 fi
29 29
30 30 # Load utility functions
31 31 . ./functions.sh
32 32
33 33 # Load parameters from configuration template file
34 34 if [ ! -z "$CONFIG_TEMPLATE" ] ; then
35 35 use_template
36 36 fi
37 37
38 38 # Introduce settings
39 39 set -e
40 40 echo -n -e "\n#\n# RPi2/3 Bootstrap Settings\n#\n"
41 41 set -x
42 42
43 43 # Raspberry Pi model configuration
44 44 RPI_MODEL=${RPI_MODEL:=2}
45 45 RPI2_DTB_FILE=${RPI2_DTB_FILE:=bcm2709-rpi-2-b.dtb}
46 46 RPI2_UBOOT_CONFIG=${RPI2_UBOOT_CONFIG:=rpi_2_defconfig}
47 47 RPI3_DTB_FILE=${RPI3_DTB_FILE:=bcm2710-rpi-3-b.dtb}
48 48 RPI3_UBOOT_CONFIG=${RPI3_UBOOT_CONFIG:=rpi_3_32b_defconfig}
49 49
50 50 # Debian release
51 51 RELEASE=${RELEASE:=jessie}
52 52 KERNEL_ARCH=${KERNEL_ARCH:=arm}
53 53 RELEASE_ARCH=${RELEASE_ARCH:=armhf}
54 54 CROSS_COMPILE=${CROSS_COMPILE:=arm-linux-gnueabihf-}
55 55 COLLABORA_KERNEL=${COLLABORA_KERNEL:=3.18.0-trunk-rpi2}
56 56 KERNEL_DEFCONFIG=${KERNEL_DEFCONFIG:=bcm2709_defconfig}
57 57 KERNEL_IMAGE=${KERNEL_IMAGE:=kernel7.img}
58 58 QEMU_BINARY=${QEMU_BINARY:=/usr/bin/qemu-arm-static}
59 KERNEL_BRANCH=${KERNEL_BRANCH:=""}
59 60
60 61 # URLs
61 62 KERNEL_URL=${KERNEL_URL:=https://github.com/raspberrypi/linux}
62 63 FIRMWARE_URL=${FIRMWARE_URL:=https://github.com/raspberrypi/firmware/raw/master/boot}
63 64 WLAN_FIRMWARE_URL=${WLAN_FIRMWARE_URL:=https://github.com/RPi-Distro/firmware-nonfree/raw/master/brcm80211/brcm}
64 65 COLLABORA_URL=${COLLABORA_URL:=https://repositories.collabora.co.uk/debian}
65 66 FBTURBO_URL=${FBTURBO_URL:=https://github.com/ssvb/xf86-video-fbturbo.git}
66 67 UBOOT_URL=${UBOOT_URL:=git://git.denx.de/u-boot.git}
67 68
68 69 # Build directories
69 70 BASEDIR=${BASEDIR:=$(pwd)/images/${RELEASE}}
70 71 BUILDDIR="${BASEDIR}/build"
72
71 73 # Prepare date string for default image file name
72 74 DATE="$(date +%Y-%m-%d)"
73 IMAGE_NAME=${IMAGE_NAME:=${BASEDIR}/${DATE}-rpi${RPI_MODEL}-${RELEASE}}
75 if [ -z "$KERNEL_BRANCH" ] ; then
76 IMAGE_NAME=${IMAGE_NAME:=${BASEDIR}/${DATE}-${KERNEL_ARCH}-CURRENT-rpi${RPI_MODEL}-${RELEASE}-${RELEASE_ARCH}}
77 else
78 IMAGE_NAME=${IMAGE_NAME:=${BASEDIR}/${DATE}-${KERNEL_ARCH}-${KERNEL_BRANCH}-rpi${RPI_MODEL}-${RELEASE}-${RELEASE_ARCH}}
79 fi
74 80
75 81 # Chroot directories
76 82 R="${BUILDDIR}/chroot"
77 83 ETC_DIR="${R}/etc"
78 84 LIB_DIR="${R}/lib"
79 85 BOOT_DIR="${R}/boot/firmware"
80 86 KERNEL_DIR="${R}/usr/src/linux"
81 87 WLAN_FIRMWARE_DIR="${R}/lib/firmware/brcm"
82 88
83 89 # Firmware directory: Blank if download from github
84 90 RPI_FIRMWARE_DIR=${RPI_FIRMWARE_DIR:=""}
85 91
86 92 # General settings
87 93 HOSTNAME=${HOSTNAME:=rpi${RPI_MODEL}-${RELEASE}}
88 94 PASSWORD=${PASSWORD:=raspberry}
89 95 USER_PASSWORD=${USER_PASSWORD:=raspberry}
90 96 DEFLOCAL=${DEFLOCAL:="en_US.UTF-8"}
91 97 TIMEZONE=${TIMEZONE:="Europe/Berlin"}
92 98 EXPANDROOT=${EXPANDROOT:=true}
93 99
94 100 # Keyboard settings
95 101 XKB_MODEL=${XKB_MODEL:=""}
96 102 XKB_LAYOUT=${XKB_LAYOUT:=""}
97 103 XKB_VARIANT=${XKB_VARIANT:=""}
98 104 XKB_OPTIONS=${XKB_OPTIONS:=""}
99 105
100 106 # Network settings (DHCP)
101 107 ENABLE_DHCP=${ENABLE_DHCP:=true}
102 108
103 109 # Network settings (static)
104 110 NET_ADDRESS=${NET_ADDRESS:=""}
105 111 NET_GATEWAY=${NET_GATEWAY:=""}
106 112 NET_DNS_1=${NET_DNS_1:=""}
107 113 NET_DNS_2=${NET_DNS_2:=""}
108 114 NET_DNS_DOMAINS=${NET_DNS_DOMAINS:=""}
109 115 NET_NTP_1=${NET_NTP_1:=""}
110 116 NET_NTP_2=${NET_NTP_2:=""}
111 117
112 118 # APT settings
113 119 APT_PROXY=${APT_PROXY:=""}
114 120 APT_SERVER=${APT_SERVER:="ftp.debian.org"}
115 121
116 122 # Feature settings
117 123 ENABLE_CONSOLE=${ENABLE_CONSOLE:=true}
118 124 ENABLE_I2C=${ENABLE_I2C:=false}
119 125 ENABLE_SPI=${ENABLE_SPI:=false}
120 126 ENABLE_IPV6=${ENABLE_IPV6:=true}
121 127 ENABLE_SSHD=${ENABLE_SSHD:=true}
122 128 ENABLE_NONFREE=${ENABLE_NONFREE:=false}
123 129 ENABLE_WIRELESS=${ENABLE_WIRELESS:=false}
124 130 ENABLE_SOUND=${ENABLE_SOUND:=true}
125 131 ENABLE_DBUS=${ENABLE_DBUS:=true}
126 132 ENABLE_HWRANDOM=${ENABLE_HWRANDOM:=true}
127 133 ENABLE_MINGPU=${ENABLE_MINGPU:=false}
128 134 ENABLE_XORG=${ENABLE_XORG:=false}
129 135 ENABLE_WM=${ENABLE_WM:=""}
130 136 ENABLE_RSYSLOG=${ENABLE_RSYSLOG:=true}
131 137 ENABLE_USER=${ENABLE_USER:=true}
132 138 USER_NAME=${USER_NAME:="pi"}
133 139 ENABLE_ROOT=${ENABLE_ROOT:=false}
134 140
135 141 # SSH settings
136 142 SSH_ENABLE_ROOT=${SSH_ENABLE_ROOT:=false}
137 143 SSH_DISABLE_PASSWORD_AUTH=${SSH_DISABLE_PASSWORD_AUTH:=false}
138 144 SSH_LIMIT_USERS=${SSH_LIMIT_USERS:=false}
139 145 SSH_ROOT_PUB_KEY=${SSH_ROOT_PUB_KEY:=""}
140 146 SSH_USER_PUB_KEY=${SSH_USER_PUB_KEY:=""}
141 147
142 148 # Advanced settings
143 149 ENABLE_MINBASE=${ENABLE_MINBASE:=false}
144 150 ENABLE_REDUCE=${ENABLE_REDUCE:=false}
145 151 ENABLE_UBOOT=${ENABLE_UBOOT:=false}
146 152 UBOOTSRC_DIR=${UBOOTSRC_DIR:=""}
147 153 ENABLE_FBTURBO=${ENABLE_FBTURBO:=false}
148 154 FBTURBOSRC_DIR=${FBTURBOSRC_DIR:=""}
149 155 ENABLE_HARDNET=${ENABLE_HARDNET:=false}
150 156 ENABLE_IPTABLES=${ENABLE_IPTABLES:=false}
151 157 ENABLE_SPLITFS=${ENABLE_SPLITFS:=false}
152 158 ENABLE_INITRAMFS=${ENABLE_INITRAMFS:=false}
153 159 ENABLE_IFNAMES=${ENABLE_IFNAMES:=true}
154 160 DISABLE_UNDERVOLT_WARNINGS=${DISABLE_UNDERVOLT_WARNINGS:=}
155 161
156 162 # Kernel compilation settings
157 163 BUILD_KERNEL=${BUILD_KERNEL:=false}
158 164 KERNEL_REDUCE=${KERNEL_REDUCE:=false}
159 165 KERNEL_THREADS=${KERNEL_THREADS:=1}
160 166 KERNEL_HEADERS=${KERNEL_HEADERS:=true}
161 167 KERNEL_MENUCONFIG=${KERNEL_MENUCONFIG:=false}
162 168 KERNEL_REMOVESRC=${KERNEL_REMOVESRC:=true}
169 KERNEL_BIN_IMAGE=${KERNEL_BIN_IMAGE:="zImage"}
163 170
164 171 # Kernel compilation from source directory settings
165 172 KERNELSRC_DIR=${KERNELSRC_DIR:=""}
166 173 KERNELSRC_CLEAN=${KERNELSRC_CLEAN:=false}
167 174 KERNELSRC_CONFIG=${KERNELSRC_CONFIG:=true}
168 175 KERNELSRC_PREBUILT=${KERNELSRC_PREBUILT:=false}
169 176
170 177 # Reduce disk usage settings
171 178 REDUCE_APT=${REDUCE_APT:=true}
172 179 REDUCE_DOC=${REDUCE_DOC:=true}
173 180 REDUCE_MAN=${REDUCE_MAN:=true}
174 181 REDUCE_VIM=${REDUCE_VIM:=false}
175 182 REDUCE_BASH=${REDUCE_BASH:=false}
176 183 REDUCE_HWDB=${REDUCE_HWDB:=true}
177 184 REDUCE_SSHD=${REDUCE_SSHD:=true}
178 185 REDUCE_LOCALE=${REDUCE_LOCALE:=true}
179 186
180 187 # Encrypted filesystem settings
181 188 ENABLE_CRYPTFS=${ENABLE_CRYPTFS:=false}
182 189 CRYPTFS_PASSWORD=${CRYPTFS_PASSWORD:=""}
183 190 CRYPTFS_MAPPING=${CRYPTFS_MAPPING:="secure"}
184 191 CRYPTFS_CIPHER=${CRYPTFS_CIPHER:="aes-xts-plain64:sha512"}
185 192 CRYPTFS_XTSKEYSIZE=${CRYPTFS_XTSKEYSIZE:=512}
186 193
187 194 # Stop the Crypto Wars
188 195 DISABLE_FBI=${DISABLE_FBI:=false}
189 196
190 197 # Chroot scripts directory
191 198 CHROOT_SCRIPTS=${CHROOT_SCRIPTS:=""}
192 199
193 200 # Packages required in the chroot build environment
194 201 APT_INCLUDES=${APT_INCLUDES:=""}
195 202 APT_INCLUDES="${APT_INCLUDES},apt-transport-https,apt-utils,ca-certificates,debian-archive-keyring,dialog,sudo,systemd,sysvinit-utils"
196 203
197 204 # Packages required for bootstrapping
198 205 REQUIRED_PACKAGES="debootstrap debian-archive-keyring qemu-user-static binfmt-support dosfstools rsync bmap-tools whois git bc psmisc dbus sudo"
199 206 MISSING_PACKAGES=""
200 207
201 208 # Packages installed for c/c++ build environment in chroot (keep empty)
202 209 COMPILER_PACKAGES=""
203 210
204 211 set +x
205 212
206 213 # Set Raspberry Pi model specific configuration
207 214 if [ "$RPI_MODEL" = 2 ] ; then
208 215 DTB_FILE=${RPI2_DTB_FILE}
209 216 UBOOT_CONFIG=${RPI2_UBOOT_CONFIG}
210 217 elif [ "$RPI_MODEL" = 3 ] ; then
211 218 DTB_FILE=${RPI3_DTB_FILE}
212 219 UBOOT_CONFIG=${RPI3_UBOOT_CONFIG}
213 220 BUILD_KERNEL=true
214 221 else
215 222 echo "error: Raspberry Pi model ${RPI_MODEL} is not supported!"
216 223 exit 1
217 224 fi
218 225
219 226 # Check if the internal wireless interface is supported by the RPi model
220 227 if [ "$ENABLE_WIRELESS" = true ] && [ "$RPI_MODEL" != 3 ] ; then
221 228 echo "error: The selected Raspberry Pi model has no internal wireless interface"
222 229 exit 1
223 230 fi
224 231
225 232 # Check if DISABLE_UNDERVOLT_WARNINGS parameter value is supported
226 233 if [ ! -z "$DISABLE_UNDERVOLT_WARNINGS" ] ; then
227 234 if [ "$DISABLE_UNDERVOLT_WARNINGS" != 1 ] && [ "$DISABLE_UNDERVOLT_WARNINGS" != 2 ] ; then
228 235 echo "error: DISABLE_UNDERVOLT_WARNINGS=${DISABLE_UNDERVOLT_WARNINGS} is not supported"
229 236 exit 1
230 237 fi
231 238 fi
232 239
233 240 # Build RPi2/3 Linux kernel if required by Debian release
234 241 if [ "$RELEASE" = "stretch" ] ; then
235 242 BUILD_KERNEL=true
236 243 fi
237 244
238 245 # Add packages required for kernel cross compilation
239 246 if [ "$BUILD_KERNEL" = true ] ; then
240 REQUIRED_PACKAGES="${REQUIRED_PACKAGES} crossbuild-essential-armhf"
247 if [ "$KERNEL_ARCH" = "arm" ] ; then
248 REQUIRED_PACKAGES="${REQUIRED_PACKAGES} crossbuild-essential-armhf"
249 else
250 REQUIRED_PACKAGES="${REQUIRED_PACKAGES} crossbuild-essential-arm64"
251 fi
241 252 fi
242 253
243 254 # Add libncurses5 to enable kernel menuconfig
244 255 if [ "$KERNEL_MENUCONFIG" = true ] ; then
245 256 REQUIRED_PACKAGES="${REQUIRED_PACKAGES} libncurses5-dev"
246 257 fi
247 258
248 259 # Stop the Crypto Wars
249 260 if [ "$DISABLE_FBI" = true ] ; then
250 261 ENABLE_CRYPTFS=true
251 262 fi
252 263
253 264 # Add cryptsetup package to enable filesystem encryption
254 265 if [ "$ENABLE_CRYPTFS" = true ] && [ "$BUILD_KERNEL" = true ] ; then
255 266 REQUIRED_PACKAGES="${REQUIRED_PACKAGES} cryptsetup"
256 267 APT_INCLUDES="${APT_INCLUDES},cryptsetup"
257 268
258 269 if [ -z "$CRYPTFS_PASSWORD" ] ; then
259 270 echo "error: no password defined (CRYPTFS_PASSWORD)!"
260 271 exit 1
261 272 fi
262 273 ENABLE_INITRAMFS=true
263 274 fi
264 275
265 276 # Add initramfs generation tools
266 277 if [ "$ENABLE_INITRAMFS" = true ] && [ "$BUILD_KERNEL" = true ] ; then
267 278 APT_INCLUDES="${APT_INCLUDES},initramfs-tools"
268 279 fi
269 280
270 281 # Add device-tree-compiler required for building the U-Boot bootloader
271 282 if [ "$ENABLE_UBOOT" = true ] ; then
272 283 APT_INCLUDES="${APT_INCLUDES},device-tree-compiler"
273 284 fi
274 285
275 286 # Check if root SSH (v2) public key file exists
276 287 if [ ! -z "$SSH_ROOT_PUB_KEY" ] ; then
277 288 if [ ! -f "$SSH_ROOT_PUB_KEY" ] ; then
278 289 echo "error: '$SSH_ROOT_PUB_KEY' specified SSH public key file not found (SSH_ROOT_PUB_KEY)!"
279 290 exit 1
280 291 fi
281 292 fi
282 293
283 294 # Check if $USER_NAME SSH (v2) public key file exists
284 295 if [ ! -z "$SSH_USER_PUB_KEY" ] ; then
285 296 if [ ! -f "$SSH_USER_PUB_KEY" ] ; then
286 297 echo "error: '$SSH_USER_PUB_KEY' specified SSH public key file not found (SSH_USER_PUB_KEY)!"
287 298 exit 1
288 299 fi
289 300 fi
290 301
291 302 # Check if all required packages are installed on the build system
292 303 for package in $REQUIRED_PACKAGES ; do
293 304 if [ "`dpkg-query -W -f='${Status}' $package`" != "install ok installed" ] ; then
294 305 MISSING_PACKAGES="${MISSING_PACKAGES} $package"
295 306 fi
296 307 done
297 308
298 309 # If there are missing packages ask confirmation for install, or exit
299 310 if [ -n "$MISSING_PACKAGES" ] ; then
300 311 echo "the following packages needed by this script are not installed:"
301 312 echo "$MISSING_PACKAGES"
302 313
303 314 echo -n "\ndo you want to install the missing packages right now? [y/n] "
304 315 read confirm
305 316 [ "$confirm" != "y" ] && exit 1
306 317
307 318 # Make sure all missing required packages are installed
308 319 apt-get -qq -y install ${MISSING_PACKAGES}
309 320 fi
310 321
311 322 # Check if ./bootstrap.d directory exists
312 323 if [ ! -d "./bootstrap.d/" ] ; then
313 324 echo "error: './bootstrap.d' required directory not found!"
314 325 exit 1
315 326 fi
316 327
317 328 # Check if ./files directory exists
318 329 if [ ! -d "./files/" ] ; then
319 330 echo "error: './files' required directory not found!"
320 331 exit 1
321 332 fi
322 333
323 334 # Check if specified KERNELSRC_DIR directory exists
324 335 if [ -n "$KERNELSRC_DIR" ] && [ ! -d "$KERNELSRC_DIR" ] ; then
325 336 echo "error: '${KERNELSRC_DIR}' specified directory not found (KERNELSRC_DIR)!"
326 337 exit 1
327 338 fi
328 339
329 340 # Check if specified UBOOTSRC_DIR directory exists
330 341 if [ -n "$UBOOTSRC_DIR" ] && [ ! -d "$UBOOTSRC_DIR" ] ; then
331 342 echo "error: '${UBOOTSRC_DIR}' specified directory not found (UBOOTSRC_DIR)!"
332 343 exit 1
333 344 fi
334 345
335 346 # Check if specified FBTURBOSRC_DIR directory exists
336 347 if [ -n "$FBTURBOSRC_DIR" ] && [ ! -d "$FBTURBOSRC_DIR" ] ; then
337 348 echo "error: '${FBTURBOSRC_DIR}' specified directory not found (FBTURBOSRC_DIR)!"
338 349 exit 1
339 350 fi
340 351
341 352 # Check if specified CHROOT_SCRIPTS directory exists
342 353 if [ -n "$CHROOT_SCRIPTS" ] && [ ! -d "$CHROOT_SCRIPTS" ] ; then
343 354 echo "error: ${CHROOT_SCRIPTS} specified directory not found (CHROOT_SCRIPTS)!"
344 355 exit 1
345 356 fi
346 357
347 358 # Check if specified device mapping already exists (will be used by cryptsetup)
348 359 if [ -r "/dev/mapping/${CRYPTFS_MAPPING}" ] ; then
349 360 echo "error: mapping /dev/mapping/${CRYPTFS_MAPPING} already exists, not proceeding"
350 361 exit 1
351 362 fi
352 363
353 364 # Don't clobber an old build
354 365 if [ -e "$BUILDDIR" ] ; then
355 366 echo "error: directory ${BUILDDIR} already exists, not proceeding"
356 367 exit 1
357 368 fi
358 369
359 370 # Setup chroot directory
360 371 mkdir -p "${R}"
361 372
362 373 # Check if build directory has enough of free disk space >512MB
363 374 if [ "$(df --output=avail ${BUILDDIR} | sed "1d")" -le "524288" ] ; then
364 375 echo "error: ${BUILDDIR} not enough space left to generate the output image!"
365 376 exit 1
366 377 fi
367 378
368 379 set -x
369 380
370 381 # Call "cleanup" function on various signals and errors
371 382 trap cleanup 0 1 2 3 6
372 383
373 384 # Add required packages for the minbase installation
374 385 if [ "$ENABLE_MINBASE" = true ] ; then
375 386 APT_INCLUDES="${APT_INCLUDES},vim-tiny,netbase,net-tools,ifupdown"
376 387 fi
377 388
378 389 # Add required locales packages
379 390 if [ "$DEFLOCAL" != "en_US.UTF-8" ] ; then
380 391 APT_INCLUDES="${APT_INCLUDES},locales,keyboard-configuration,console-setup"
381 392 fi
382 393
383 394 # Add parted package, required to get partprobe utility
384 395 if [ "$EXPANDROOT" = true ] ; then
385 396 APT_INCLUDES="${APT_INCLUDES},parted"
386 397 fi
387 398
388 399 # Add dbus package, recommended if using systemd
389 400 if [ "$ENABLE_DBUS" = true ] ; then
390 401 APT_INCLUDES="${APT_INCLUDES},dbus"
391 402 fi
392 403
393 404 # Add iptables IPv4/IPv6 package
394 405 if [ "$ENABLE_IPTABLES" = true ] ; then
395 406 APT_INCLUDES="${APT_INCLUDES},iptables"
396 407 fi
397 408
398 409 # Add openssh server package
399 410 if [ "$ENABLE_SSHD" = true ] ; then
400 411 APT_INCLUDES="${APT_INCLUDES},openssh-server"
401 412 fi
402 413
403 414 # Add alsa-utils package
404 415 if [ "$ENABLE_SOUND" = true ] ; then
405 416 APT_INCLUDES="${APT_INCLUDES},alsa-utils"
406 417 fi
407 418
408 419 # Add rng-tools package
409 420 if [ "$ENABLE_HWRANDOM" = true ] ; then
410 421 APT_INCLUDES="${APT_INCLUDES},rng-tools"
411 422 fi
412 423
413 424 # Add fbturbo video driver
414 425 if [ "$ENABLE_FBTURBO" = true ] ; then
415 426 # Enable xorg package dependencies
416 427 ENABLE_XORG=true
417 428 fi
418 429
419 430 # Add user defined window manager package
420 431 if [ -n "$ENABLE_WM" ] ; then
421 432 APT_INCLUDES="${APT_INCLUDES},${ENABLE_WM}"
422 433
423 434 # Enable xorg package dependencies
424 435 ENABLE_XORG=true
425 436 fi
426 437
427 438 # Add xorg package
428 439 if [ "$ENABLE_XORG" = true ] ; then
429 440 APT_INCLUDES="${APT_INCLUDES},xorg"
430 441 fi
431 442
432 443 # Replace selected packages with smaller clones
433 444 if [ "$ENABLE_REDUCE" = true ] ; then
434 445 # Add levee package instead of vim-tiny
435 446 if [ "$REDUCE_VIM" = true ] ; then
436 447 APT_INCLUDES="$(echo ${APT_INCLUDES} | sed "s/vim-tiny/levee/")"
437 448 fi
438 449
439 450 # Add dropbear package instead of openssh-server
440 451 if [ "$REDUCE_SSHD" = true ] ; then
441 452 APT_INCLUDES="$(echo ${APT_INCLUDES} | sed "s/openssh-server/dropbear/")"
442 453 fi
443 454 fi
444 455
445 456 # Configure kernel sources if no KERNELSRC_DIR
446 457 if [ "$BUILD_KERNEL" = true ] && [ -z "$KERNELSRC_DIR" ] ; then
447 458 KERNELSRC_CONFIG=true
448 459 fi
449 460
450 461 # Configure reduced kernel
451 462 if [ "$KERNEL_REDUCE" = true ] ; then
452 463 KERNELSRC_CONFIG=false
453 464 fi
454 465
455 466 # Execute bootstrap scripts
456 467 for SCRIPT in bootstrap.d/*.sh; do
457 468 head -n 3 "$SCRIPT"
458 469 . "$SCRIPT"
459 470 done
460 471
461 472 ## Execute custom bootstrap scripts
462 473 if [ -d "custom.d" ] ; then
463 474 for SCRIPT in custom.d/*.sh; do
464 475 . "$SCRIPT"
465 476 done
466 477 fi
467 478
468 479 # Execute custom scripts inside the chroot
469 480 if [ -n "$CHROOT_SCRIPTS" ] && [ -d "$CHROOT_SCRIPTS" ] ; then
470 481 cp -r "${CHROOT_SCRIPTS}" "${R}/chroot_scripts"
471 482 chroot_exec /bin/bash -x <<'EOF'
472 483 for SCRIPT in /chroot_scripts/* ; do
473 484 if [ -f $SCRIPT -a -x $SCRIPT ] ; then
474 485 $SCRIPT
475 486 fi
476 487 done
477 488 EOF
478 489 rm -rf "${R}/chroot_scripts"
479 490 fi
480 491
481 492 # Remove c/c++ build environment from the chroot
482 493 chroot_remove_cc
483 494
484 495 # Remove apt-utils
485 496 if [ "$RELEASE" = "jessie" ] ; then
486 497 chroot_exec apt-get purge -qq -y --force-yes apt-utils
487 498 fi
488 499
489 500 # Generate required machine-id
490 501 MACHINE_ID=$(dbus-uuidgen)
491 502 echo -n "${MACHINE_ID}" > "${R}/var/lib/dbus/machine-id"
492 503 echo -n "${MACHINE_ID}" > "${ETC_DIR}/machine-id"
493 504
494 505 # APT Cleanup
495 506 chroot_exec apt-get -y clean
496 507 chroot_exec apt-get -y autoclean
497 508 chroot_exec apt-get -y autoremove
498 509
499 510 # Unmount mounted filesystems
500 511 umount -l "${R}/proc"
501 512 umount -l "${R}/sys"
502 513
503 514 # Clean up directories
504 515 rm -rf "${R}/run/*"
505 516 rm -rf "${R}/tmp/*"
506 517
507 518 # Clean up files
508 519 rm -f "${ETC_DIR}/ssh/ssh_host_*"
509 520 rm -f "${ETC_DIR}/dropbear/dropbear_*"
510 521 rm -f "${ETC_DIR}/apt/sources.list.save"
511 522 rm -f "${ETC_DIR}/resolvconf/resolv.conf.d/original"
512 523 rm -f "${ETC_DIR}/*-"
513 524 rm -f "${ETC_DIR}/apt/apt.conf.d/10proxy"
514 525 rm -f "${ETC_DIR}/resolv.conf"
515 526 rm -f "${R}/root/.bash_history"
516 527 rm -f "${R}/var/lib/urandom/random-seed"
517 528 rm -f "${R}/initrd.img"
518 529 rm -f "${R}/vmlinuz"
519 530 rm -f "${R}${QEMU_BINARY}"
520 531
521 532 # Calculate size of the chroot directory in KB
522 533 CHROOT_SIZE=$(expr `du -s "${R}" | awk '{ print $1 }'`)
523 534
524 535 # Calculate the amount of needed 512 Byte sectors
525 536 TABLE_SECTORS=$(expr 1 \* 1024 \* 1024 \/ 512)
526 537 FRMW_SECTORS=$(expr 64 \* 1024 \* 1024 \/ 512)
527 538 ROOT_OFFSET=$(expr ${TABLE_SECTORS} + ${FRMW_SECTORS})
528 539
529 540 # The root partition is EXT4
530 541 # This means more space than the actual used space of the chroot is used.
531 542 # As overhead for journaling and reserved blocks 25% are added.
532 543 ROOT_SECTORS=$(expr $(expr ${CHROOT_SIZE} + ${CHROOT_SIZE} \/ 100 \* 25) \* 1024 \/ 512)
533 544
534 545 # Calculate required image size in 512 Byte sectors
535 546 IMAGE_SECTORS=$(expr ${TABLE_SECTORS} + ${FRMW_SECTORS} + ${ROOT_SECTORS})
536 547
537 548 # Prepare image file
538 549 if [ "$ENABLE_SPLITFS" = true ] ; then
539 550 dd if=/dev/zero of="$IMAGE_NAME-frmw.img" bs=512 count=${TABLE_SECTORS}
540 551 dd if=/dev/zero of="$IMAGE_NAME-frmw.img" bs=512 count=0 seek=${FRMW_SECTORS}
541 552 dd if=/dev/zero of="$IMAGE_NAME-root.img" bs=512 count=${TABLE_SECTORS}
542 553 dd if=/dev/zero of="$IMAGE_NAME-root.img" bs=512 count=0 seek=${ROOT_SECTORS}
543 554
544 555 # Write firmware/boot partition tables
545 556 sfdisk -q -L -uS -f "$IMAGE_NAME-frmw.img" 2> /dev/null <<EOM
546 557 ${TABLE_SECTORS},${FRMW_SECTORS},c,*
547 558 EOM
548 559
549 560 # Write root partition table
550 561 sfdisk -q -L -uS -f "$IMAGE_NAME-root.img" 2> /dev/null <<EOM
551 562 ${TABLE_SECTORS},${ROOT_SECTORS},83
552 563 EOM
553 564
554 565 # Setup temporary loop devices
555 566 FRMW_LOOP="$(losetup -o 1M --sizelimit 64M -f --show $IMAGE_NAME-frmw.img)"
556 567 ROOT_LOOP="$(losetup -o 1M -f --show $IMAGE_NAME-root.img)"
557 568 else # ENABLE_SPLITFS=false
558 569 dd if=/dev/zero of="$IMAGE_NAME.img" bs=512 count=${TABLE_SECTORS}
559 570 dd if=/dev/zero of="$IMAGE_NAME.img" bs=512 count=0 seek=${IMAGE_SECTORS}
560 571
561 572 # Write partition table
562 573 sfdisk -q -L -uS -f "$IMAGE_NAME.img" 2> /dev/null <<EOM
563 574 ${TABLE_SECTORS},${FRMW_SECTORS},c,*
564 575 ${ROOT_OFFSET},${ROOT_SECTORS},83
565 576 EOM
566 577
567 578 # Setup temporary loop devices
568 579 FRMW_LOOP="$(losetup -o 1M --sizelimit 64M -f --show $IMAGE_NAME.img)"
569 580 ROOT_LOOP="$(losetup -o 65M -f --show $IMAGE_NAME.img)"
570 581 fi
571 582
572 583 if [ "$ENABLE_CRYPTFS" = true ] ; then
573 584 # Create dummy ext4 fs
574 585 mkfs.ext4 "$ROOT_LOOP"
575 586
576 587 # Setup password keyfile
577 588 touch .password
578 589 chmod 600 .password
579 590 echo -n ${CRYPTFS_PASSWORD} > .password
580 591
581 592 # Initialize encrypted partition
582 593 echo "YES" | cryptsetup luksFormat "${ROOT_LOOP}" -c "${CRYPTFS_CIPHER}" -s "${CRYPTFS_XTSKEYSIZE}" .password
583 594
584 595 # Open encrypted partition and setup mapping
585 596 cryptsetup luksOpen "${ROOT_LOOP}" -d .password "${CRYPTFS_MAPPING}"
586 597
587 598 # Secure delete password keyfile
588 599 shred -zu .password
589 600
590 601 # Update temporary loop device
591 602 ROOT_LOOP="/dev/mapper/${CRYPTFS_MAPPING}"
592 603
593 604 # Wipe encrypted partition (encryption cipher is used for randomness)
594 605 dd if=/dev/zero of="${ROOT_LOOP}" bs=512 count=$(blockdev --getsz "${ROOT_LOOP}")
595 606 fi
596 607
597 608 # Build filesystems
598 609 mkfs.vfat "$FRMW_LOOP"
599 610 mkfs.ext4 "$ROOT_LOOP"
600 611
601 612 # Mount the temporary loop devices
602 613 mkdir -p "$BUILDDIR/mount"
603 614 mount "$ROOT_LOOP" "$BUILDDIR/mount"
604 615
605 616 mkdir -p "$BUILDDIR/mount/boot/firmware"
606 617 mount "$FRMW_LOOP" "$BUILDDIR/mount/boot/firmware"
607 618
608 619 # Copy all files from the chroot to the loop device mount point directory
609 620 rsync -a "${R}/" "$BUILDDIR/mount/"
610 621
611 622 # Unmount all temporary loop devices and mount points
612 623 cleanup
613 624
614 625 # Create block map file(s) of image(s)
615 626 if [ "$ENABLE_SPLITFS" = true ] ; then
616 627 # Create block map files for "bmaptool"
617 628 bmaptool create -o "$IMAGE_NAME-frmw.bmap" "$IMAGE_NAME-frmw.img"
618 629 bmaptool create -o "$IMAGE_NAME-root.bmap" "$IMAGE_NAME-root.img"
619 630
620 631 # Image was successfully created
621 632 echo "$IMAGE_NAME-frmw.img ($(expr \( ${TABLE_SECTORS} + ${FRMW_SECTORS} \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
622 633 echo "$IMAGE_NAME-root.img ($(expr \( ${TABLE_SECTORS} + ${ROOT_SECTORS} \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
623 634 else
624 635 # Create block map file for "bmaptool"
625 636 bmaptool create -o "$IMAGE_NAME.bmap" "$IMAGE_NAME.img"
626 637
627 638 # Image was successfully created
628 639 echo "$IMAGE_NAME.img ($(expr \( ${TABLE_SECTORS} + ${FRMW_SECTORS} + ${ROOT_SECTORS} \) \* 512 \/ 1024 \/ 1024)M)" ": successfully created"
629 640 fi
General Comments 0
Vous devez vous connecter pour laisser un commentaire. Se connecter maintenant