Raspi2-3_GenImage Commit - r174:a92319703224 · Collaboration Tremplin des Sciences

Introduce as_nobody() function to make it easier to control how it is done....

Petter Reinholdtsen -

r174:a92319703224

parent child

Context file:

r174:a92319703224

Collapse all files

bootstrap.d/13-kernel.sh +2 -2

             #
             # Build and Setup RPi2/3 Kernel
             #
             # Load utility functions
             . ./functions.sh
             # Fetch and build latest raspberry kernel
             if [ "$BUILD_KERNEL" = true ] ; then
               # Setup source directory
               mkdir -p "${R}/usr/src"
               # Copy existing kernel sources into chroot directory
               if [ -n "$KERNELSRC_DIR" ] && [ -d "$KERNELSRC_DIR" ] ; then
                 # Copy kernel sources
                 cp -r "${KERNELSRC_DIR}" "${R}/usr/src"
                 # Clean the kernel sources
                 if [ "$KERNELSRC_CLEAN" = true ] && [ "$KERNELSRC_PREBUILT" = false ] ; then
                   make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" mrproper
                 fi
               else # KERNELSRC_DIR=""
                 # Create temporary directory for kernel sources
-                temp_dir=$(sudo -u nobody mktemp -d)
+                temp_dir=$(as_nobody mktemp -d)
                 # Fetch current RPi2/3 kernel sources
-                sudo -u nobody git -C "${temp_dir}" clone --depth=1 "${KERNEL_URL}"
+                as_nobody git -C "${temp_dir}" clone --depth=1 "${KERNEL_URL}"
                 # Copy downloaded kernel sources
                 mv "${temp_dir}/linux" "${R}/usr/src/"
                 # Remove temporary directory for kernel sources
                 rm -fr "${temp_dir}"
                 # Set permissions of the kernel sources
                 chown -R root:root "${R}/usr/src"
               fi
               # Calculate optimal number of kernel building threads
               if [ "$KERNEL_THREADS" = "1" ] && [ -r /proc/cpuinfo ] ; then
                 KERNEL_THREADS=$(grep -c processor /proc/cpuinfo)
               fi
               # Configure and build kernel
               if [ "$KERNELSRC_PREBUILT" = false ] ; then
                 # Remove device, network and filesystem drivers from kernel configuration
                 if [ "$KERNEL_REDUCE" = true ] ; then
                   make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" "${KERNEL_DEFCONFIG}"
                   sed -i\
                   -e "s/\(^CONFIG_SND.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_SOUND.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_AC97.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_VIDEO_.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_MEDIA_TUNER.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_DVB.*\=\)[ym]/\1n/"\
                   -e "s/\(^CONFIG_REISERFS.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_JFS.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_XFS.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_GFS2.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_OCFS2.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_BTRFS.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_HFS.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_JFFS2.*\=\)[ym]/\1n/"\
                   -e "s/\(^CONFIG_UBIFS.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_SQUASHFS.*\=\)[ym]/\1n/"\
                   -e "s/\(^CONFIG_W1.*\=\)[ym]/\1n/"\
                   -e "s/\(^CONFIG_HAMRADIO.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_CAN.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_IRDA.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_BT_.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_WIMAX.*\=\)[ym]/\1n/"\
                   -e "s/\(^CONFIG_6LOWPAN.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_IEEE802154.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_NFC.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_FB_TFT=.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_TOUCHSCREEN.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_USB_GSPCA_.*\=\).*/\1n/"\
                   -e "s/\(^CONFIG_DRM.*\=\).*/\1n/"\
                   "${KERNEL_DIR}/.config"
                 fi
                 if [ "$KERNELSRC_CONFIG" = true ] ; then
                   # Load default raspberry kernel configuration
                   make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" "${KERNEL_DEFCONFIG}"
                   if [ ! -z "$KERNELSRC_USRCONFIG" ] ; then
                     cp $KERNELSRC_USRCONFIG ${KERNEL_DIR}/.config
                   fi
                   # Start menu-driven kernel configuration (interactive)
                   if [ "$KERNEL_MENUCONFIG" = true ] ; then
                     make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" menuconfig
                   fi
                 fi
                 # Cross compile kernel and modules
                 make -C "${KERNEL_DIR}" -j${KERNEL_THREADS} ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" zImage modules dtbs
               fi
               # Check if kernel compilation was successful
               if [ ! -r "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/zImage" ] ; then
                 echo "error: kernel compilation failed! (zImage not found)"
                 cleanup
                 exit 1
               fi
               # Install kernel modules
               if [ "$ENABLE_REDUCE" = true ] ; then
                 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=../../.. modules_install
               else
                 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" INSTALL_MOD_PATH=../../.. modules_install
                 # Install kernel firmware
                 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" INSTALL_FW_PATH=../../../lib firmware_install
               fi
               # Install kernel headers
               if [ "$KERNEL_HEADERS" = true ] && [ "$KERNEL_REDUCE" = false ] ; then
                 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" INSTALL_HDR_PATH=../.. headers_install
               fi
               # Prepare boot (firmware) directory
               mkdir "${BOOT_DIR}"
               # Get kernel release version
               KERNEL_VERSION=`cat "${KERNEL_DIR}/include/config/kernel.release"`
               # Copy kernel configuration file to the boot directory
               install_readonly "${KERNEL_DIR}/.config" "${R}/boot/config-${KERNEL_VERSION}"
               # Copy dts and dtb device tree sources and binaries
               mkdir "${BOOT_DIR}/overlays"
               install_readonly "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/dts/"*.dtb "${BOOT_DIR}/"
               install_readonly "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/dts/overlays/"*.dtb* "${BOOT_DIR}/overlays/"
               install_readonly "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/dts/overlays/README" "${BOOT_DIR}/overlays/README"
               if [ "$ENABLE_UBOOT" = false ] ; then
                 # Convert and copy zImage kernel to the boot directory
                 "${KERNEL_DIR}/scripts/mkknlimg" "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/zImage" "${BOOT_DIR}/${KERNEL_IMAGE}"
               else
                 # Copy zImage kernel to the boot directory
                 install_readonly "${KERNEL_DIR}/arch/${KERNEL_ARCH}/boot/zImage" "${BOOT_DIR}/${KERNEL_IMAGE}"
               fi
               # Remove kernel sources
               if [ "$KERNEL_REMOVESRC" = true ] ; then
                 rm -fr "${KERNEL_DIR}"
               else
                 make -C "${KERNEL_DIR}" ARCH="${KERNEL_ARCH}" CROSS_COMPILE="${CROSS_COMPILE}" modules_prepare
                 # Create symlinks for kernel modules
                 ln -sf "${KERNEL_DIR}" "${R}/lib/modules/${KERNEL_VERSION}/build"
                 ln -sf "${KERNEL_DIR}" "${R}/lib/modules/${KERNEL_VERSION}/source"
               fi
             else # BUILD_KERNEL=false
               # Kernel installation
               chroot_exec apt-get -qq -y --no-install-recommends install linux-image-"${COLLABORA_KERNEL}" raspberrypi-bootloader-nokernel
               # Install flash-kernel last so it doesn't try (and fail) to detect the platform in the chroot
               chroot_exec apt-get -qq -y install flash-kernel
               # Check if kernel installation was successful
               VMLINUZ="$(ls -1 ${R}/boot/vmlinuz-* | sort | tail -n 1)"
               if [ -z "$VMLINUZ" ] ; then
                 echo "error: kernel installation failed! (/boot/vmlinuz-* not found)"
                 cleanup
                 exit 1
               fi
               # Copy vmlinuz kernel to the boot directory
               install_readonly "${VMLINUZ}" "${BOOT_DIR}/${KERNEL_IMAGE}"
             fi

bootstrap.d/15-rpi-config.sh +8 -8

             #
             # Setup RPi2/3 config and cmdline
             #
             # Load utility functions
             . ./functions.sh
             if [ "$BUILD_KERNEL" = true ] ; then
               if [ -n "$RPI_FIRMWARE_DIR" ] && [ -d "$RPI_FIRMWARE_DIR" ] ; then
                 # Install boot binaries from local directory
                 cp ${RPI_FIRMWARE_DIR}/boot/bootcode.bin ${BOOT_DIR}/bootcode.bin
                 cp ${RPI_FIRMWARE_DIR}/boot/fixup.dat ${BOOT_DIR}/fixup.dat
                 cp ${RPI_FIRMWARE_DIR}/boot/fixup_cd.dat ${BOOT_DIR}/fixup_cd.dat
                 cp ${RPI_FIRMWARE_DIR}/boot/fixup_x.dat ${BOOT_DIR}/fixup_x.dat
                 cp ${RPI_FIRMWARE_DIR}/boot/start.elf ${BOOT_DIR}/start.elf
                 cp ${RPI_FIRMWARE_DIR}/boot/start_cd.elf ${BOOT_DIR}/start_cd.elf
                 cp ${RPI_FIRMWARE_DIR}/boot/start_x.elf ${BOOT_DIR}/start_x.elf
               else
                 # Create temporary directory for boot binaries
-                temp_dir=$(sudo -u nobody mktemp -d)
+                temp_dir=$(as_nobody mktemp -d)
                 # Install latest boot binaries from raspberry/firmware github
-                sudo -u nobody wget -q -O "${temp_dir}/bootcode.bin" "${FIRMWARE_URL}/bootcode.bin"
+                as_nobody wget -q -O "${temp_dir}/bootcode.bin" "${FIRMWARE_URL}/bootcode.bin"
-                sudo -u nobody wget -q -O "${temp_dir}/fixup.dat" "${FIRMWARE_URL}/fixup.dat"
+                as_nobody wget -q -O "${temp_dir}/fixup.dat" "${FIRMWARE_URL}/fixup.dat"
-                sudo -u nobody wget -q -O "${temp_dir}/fixup_cd.dat" "${FIRMWARE_URL}/fixup_cd.dat"
+                as_nobody wget -q -O "${temp_dir}/fixup_cd.dat" "${FIRMWARE_URL}/fixup_cd.dat"
-                sudo -u nobody wget -q -O "${temp_dir}/fixup_x.dat" "${FIRMWARE_URL}/fixup_x.dat"
+                as_nobody wget -q -O "${temp_dir}/fixup_x.dat" "${FIRMWARE_URL}/fixup_x.dat"
-                sudo -u nobody wget -q -O "${temp_dir}/start.elf" "${FIRMWARE_URL}/start.elf"
+                as_nobody wget -q -O "${temp_dir}/start.elf" "${FIRMWARE_URL}/start.elf"
-                sudo -u nobody wget -q -O "${temp_dir}/start_cd.elf" "${FIRMWARE_URL}/start_cd.elf"
+                as_nobody wget -q -O "${temp_dir}/start_cd.elf" "${FIRMWARE_URL}/start_cd.elf"
-                sudo -u nobody wget -q -O "${temp_dir}/start_x.elf" "${FIRMWARE_URL}/start_x.elf"
+                as_nobody wget -q -O "${temp_dir}/start_x.elf" "${FIRMWARE_URL}/start_x.elf"
                 # Move downloaded boot binaries
                 mv "${temp_dir}/"* "${BOOT_DIR}/"
                 # Remove temporary directory for boot binaries
                 rm -fr "${temp_dir}"
                 # Set permissions of the boot binaries
                 chown -R root:root "${BOOT_DIR}"
                 chmod -R 600 "${BOOT_DIR}"
               fi
             fi
             # Setup firmware boot cmdline
             if [ "$ENABLE_SPLITFS" = true ] ; then
               CMDLINE="dwc_otg.lpm_enable=0 root=/dev/sda1 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline rootwait console=tty1"
             else
               CMDLINE="dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 rootflags=commit=100,data=writeback elevator=deadline rootwait console=tty1"
             fi
             # Add encrypted root partition to cmdline.txt
             if [ "$ENABLE_CRYPTFS" = true ] ; then
               if [ "$ENABLE_SPLITFS" = true ] ; then
                 CMDLINE=$(echo ${CMDLINE} | sed "s/sda1/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/sda1:${CRYPTFS_MAPPING}/")
               else
                 CMDLINE=$(echo ${CMDLINE} | sed "s/mmcblk0p2/mapper\/${CRYPTFS_MAPPING} cryptdevice=\/dev\/mmcblk0p2:${CRYPTFS_MAPPING}/")
               fi
             fi
             # Add serial console support
             if [ "$ENABLE_CONSOLE" = true ] ; then
               CMDLINE="${CMDLINE} console=ttyAMA0,115200 kgdboc=ttyAMA0,115200"
             fi
             # Remove IPv6 networking support
             if [ "$ENABLE_IPV6" = false ] ; then
               CMDLINE="${CMDLINE} ipv6.disable=1"
             fi
             # Automatically assign predictable network interface names
             if [ "$ENABLE_IFNAMES" = false ] ; then
               CMDLINE="${CMDLINE} net.ifnames=0"
             else
               CMDLINE="${CMDLINE} net.ifnames=1"
             fi
             # Set init to systemd if required by Debian release
             if [ "$RELEASE" = "stretch" ] ; then
               CMDLINE="${CMDLINE} init=/bin/systemd"
             fi
             # Install firmware boot cmdline
             echo "${CMDLINE}" > "${BOOT_DIR}/cmdline.txt"
             # Install firmware config
             install_readonly files/boot/config.txt "${BOOT_DIR}/config.txt"
             # Setup minimal GPU memory allocation size: 16MB (no X)
             if [ "$ENABLE_MINGPU" = true ] ; then
               echo "gpu_mem=16" >> "${BOOT_DIR}/config.txt"
             fi
             # Setup boot with initramfs
             if [ "$ENABLE_INITRAMFS" = true ] ; then
               echo "initramfs initramfs-${KERNEL_VERSION} followkernel" >> "${BOOT_DIR}/config.txt"
             fi
             # Disable RPi3 Bluetooth and restore ttyAMA0 serial device
             if [ "$RPI_MODEL" = 3 ] ; then
               if [ "$ENABLE_CONSOLE" = true ] && [ "$ENABLE_UBOOT" = false ] ; then
                 echo "dtoverlay=pi3-disable-bt" >> "${BOOT_DIR}/config.txt"
                 echo "enable_uart=1" >> "${BOOT_DIR}/config.txt"
               fi
             fi
             # Create firmware configuration and cmdline symlinks
             ln -sf firmware/config.txt "${R}/boot/config.txt"
             ln -sf firmware/cmdline.txt "${R}/boot/cmdline.txt"
             # Install and setup kernel modules to load at boot
             mkdir -p "${R}/lib/modules-load.d/"
             install_readonly files/modules/rpi2.conf "${R}/lib/modules-load.d/rpi2.conf"
             # Load hardware random module at boot
             if [ "$ENABLE_HWRANDOM" = true ] && [ "$BUILD_KERNEL" = false ] ; then
               sed -i "s/^# bcm2708_rng/bcm2708_rng/" "${R}/lib/modules-load.d/rpi2.conf"
             fi
             # Load sound module at boot
             if [ "$ENABLE_SOUND" = true ] ; then
               sed -i "s/^# snd_bcm2835/snd_bcm2835/" "${R}/lib/modules-load.d/rpi2.conf"
             else
               echo "dtparam=audio=off" >> "${BOOT_DIR}/config.txt"
             fi
             # Enable I2C interface
             if [ "$ENABLE_I2C" = true ] ; then
               echo "dtparam=i2c_arm=on" >> "${BOOT_DIR}/config.txt"
               sed -i "s/^# i2c-bcm2708/i2c-bcm2708/" "${R}/lib/modules-load.d/rpi2.conf"
               sed -i "s/^# i2c-dev/i2c-dev/" "${R}/lib/modules-load.d/rpi2.conf"
             fi
             # Enable SPI interface
             if [ "$ENABLE_SPI" = true ] ; then
               echo "dtparam=spi=on" >> "${BOOT_DIR}/config.txt"
               echo "spi-bcm2708" >> "${R}/lib/modules-load.d/rpi2.conf"
               if [ "$RPI_MODEL" = 3 ] ; then
                 sed -i "s/spi-bcm2708/spi-bcm2835/" "${R}/lib/modules-load.d/rpi2.conf"
               fi
             fi
             # Disable RPi2/3 under-voltage warnings
             if [ ! -z "$DISABLE_UNDERVOLT_WARNINGS" ] ; then
               echo "avoid_warnings=${DISABLE_UNDERVOLT_WARNINGS}" >> "${BOOT_DIR}/config.txt"
             fi
             # Install kernel modules blacklist
             mkdir -p "${ETC_DIR}/modprobe.d/"
             install_readonly files/modules/raspi-blacklist.conf "${ETC_DIR}/modprobe.d/raspi-blacklist.conf"
             # Install sysctl.d configuration files
             install_readonly files/sysctl.d/81-rpi-vm.conf "${ETC_DIR}/sysctl.d/81-rpi-vm.conf"

bootstrap.d/20-networking.sh +3 -3

             #
             # Setup Networking
             #
             # Load utility functions
             . ./functions.sh
             # Install and setup hostname
             install_readonly files/network/hostname "${ETC_DIR}/hostname"
             sed -i "s/^rpi2-jessie/${HOSTNAME}/" "${ETC_DIR}/hostname"
             # Install and setup hosts
             install_readonly files/network/hosts "${ETC_DIR}/hosts"
             sed -i "s/rpi2-jessie/${HOSTNAME}/" "${ETC_DIR}/hosts"
             # Setup hostname entry with static IP
             if [ "$NET_ADDRESS" != "" ] ; then
               NET_IP=$(echo "${NET_ADDRESS}" | cut -f 1 -d'/')
               sed -i "s/^127.0.1.1/${NET_IP}/" "${ETC_DIR}/hosts"
             fi
             # Remove IPv6 hosts
             if [ "$ENABLE_IPV6" = false ] ; then
               sed -i -e "/::[1-9]/d" -e "/^$/d" "${ETC_DIR}/hosts"
             fi
             # Install hint about network configuration
             install_readonly files/network/interfaces "${ETC_DIR}/network/interfaces"
             # Install configuration for interface eth0
             install_readonly files/network/eth.network "${ETC_DIR}/systemd/network/eth.network"
             if [ "$ENABLE_DHCP" = true ] ; then
               # Enable DHCP configuration for interface eth0
               sed -i -e "s/DHCP=.*/DHCP=yes/" -e "/DHCP/q" "${ETC_DIR}/systemd/network/eth.network"
               # Set DHCP configuration to IPv4 only
               if [ "$ENABLE_IPV6" = false ] ; then
                 sed -i "s/DHCP=.*/DHCP=v4/" "${ETC_DIR}/systemd/network/eth.network"
               fi
             else # ENABLE_DHCP=false
               # Set static network configuration for interface eth0
               sed -i\
               -e "s|DHCP=.*|DHCP=no|"\
               -e "s|Address=\$|Address=${NET_ADDRESS}|"\
               -e "s|Gateway=\$|Gateway=${NET_GATEWAY}|"\
               -e "0,/DNS=\$/ s|DNS=\$|DNS=${NET_DNS_1}|"\
               -e "0,/DNS=\$/ s|DNS=\$|DNS=${NET_DNS_2}|"\
               -e "s|Domains=\$|Domains=${NET_DNS_DOMAINS}|"\
               -e "0,/NTP=\$/ s|NTP=\$|NTP=${NET_NTP_1}|"\
               -e "0,/NTP=\$/ s|NTP=\$|NTP=${NET_NTP_2}|"\
               "${ETC_DIR}/systemd/network/eth.network"
             fi
             # Remove empty settings from network configuration
             sed -i "/.*=\$/d" "${ETC_DIR}/systemd/network/eth.network"
             # Move systemd network configuration if required by Debian release
             if [ "$RELEASE" = "stretch" ] ; then
               mv -v "${ETC_DIR}/systemd/network/eth.network" "${LIB_DIR}/systemd/network/10-eth.network"
               rm -fr "${ETC_DIR}/systemd/network"
             fi
             # Enable systemd-networkd service
             chroot_exec systemctl enable systemd-networkd
             # Install host.conf resolver configuration
             install_readonly files/network/host.conf "${ETC_DIR}/host.conf"
             # Enable network stack hardening
             if [ "$ENABLE_HARDNET" = true ] ; then
               # Install sysctl.d configuration files
               install_readonly files/sysctl.d/82-rpi-net-hardening.conf "${ETC_DIR}/sysctl.d/82-rpi-net-hardening.conf"
               # Setup resolver warnings about spoofed addresses
               sed -i "s/^# spoof warn/spoof warn/" "${ETC_DIR}/host.conf"
             fi
             # Enable time sync
             if [ "NET_NTP_1" != "" ] ; then
               chroot_exec systemctl enable systemd-timesyncd.service
             fi
             # Download the firmware binary blob required to use the RPi3 wireless interface
             if [ "$ENABLE_WIRELESS" = true ] ; then
               if [ ! -d ${WLAN_FIRMWARE_DIR} ] ; then
                 mkdir -p ${WLAN_FIRMWARE_DIR}
               fi
               # Create temporary directory for firmware binary blob
-              temp_dir=$(sudo -u nobody mktemp -d)
+              temp_dir=$(as_nobody mktemp -d)
               # Fetch firmware binary blob
-              sudo -u nobody wget -q -O "${temp_dir}/brcmfmac43430-sdio.bin" "${WLAN_FIRMWARE_URL}/brcmfmac43430-sdio.bin"
+              as_nobody wget -q -O "${temp_dir}/brcmfmac43430-sdio.bin" "${WLAN_FIRMWARE_URL}/brcmfmac43430-sdio.bin"
-              sudo -u nobody wget -q -O "${temp_dir}/brcmfmac43430-sdio.txt" "${WLAN_FIRMWARE_URL}/brcmfmac43430-sdio.txt"
+              as_nobody wget -q -O "${temp_dir}/brcmfmac43430-sdio.txt" "${WLAN_FIRMWARE_URL}/brcmfmac43430-sdio.txt"
               # Move downloaded firmware binary blob
               mv "${temp_dir}/brcmfmac43430-sdio."* "${WLAN_FIRMWARE_DIR}/"
               # Remove temporary directory for firmware binary blob
               rm -fr "${temp_dir}"
               # Set permissions of the firmware binary blob
               chown root:root "${WLAN_FIRMWARE_DIR}/brcmfmac43430-sdio."*
               chmod 600 "${WLAN_FIRMWARE_DIR}/brcmfmac43430-sdio."*
             fi

bootstrap.d/41-uboot.sh +2 -2

             #
             # Build and Setup U-Boot
             #
             # Load utility functions
             . ./functions.sh
             # Fetch and build U-Boot bootloader
             if [ "$ENABLE_UBOOT" = true ] ; then
               # Install c/c++ build environment inside the chroot
               chroot_install_cc
               # Copy existing U-Boot sources into chroot directory
               if [ -n "$UBOOTSRC_DIR" ] && [ -d "$UBOOTSRC_DIR" ] ; then
                 # Copy local U-Boot sources
                 cp -r "${UBOOTSRC_DIR}" "${R}/tmp"
               else
                 # Create temporary directory for U-Boot sources
-                temp_dir=$(sudo -u nobody mktemp -d)
+                temp_dir=$(as_nobody mktemp -d)
                 # Fetch U-Boot sources
-                sudo -u nobody git -C "${temp_dir}" clone "${UBOOT_URL}"
+                as_nobody git -C "${temp_dir}" clone "${UBOOT_URL}"
                 # Copy downloaded U-Boot sources
                 mv "${temp_dir}/u-boot" "${R}/tmp/"
                 # Set permissions of the U-Boot sources
                 chown -R root:root "${R}/tmp/u-boot"
                 # Remove temporary directory for U-Boot sources
                 rm -fr "${temp_dir}"
               fi
               # Build and install U-Boot inside chroot
               chroot_exec make -j${KERNEL_THREADS} -C /tmp/u-boot/ ${UBOOT_CONFIG} all
               # Copy compiled bootloader binary and set config.txt to load it
               install_exec "${R}/tmp/u-boot/tools/mkimage" "${R}/usr/sbin/mkimage"
               install_readonly "${R}/tmp/u-boot/u-boot.bin" "${BOOT_DIR}/u-boot.bin"
               printf "\n# boot u-boot kernel\nkernel=u-boot.bin\n" >> "${BOOT_DIR}/config.txt"
               # Install and setup U-Boot command file
               install_readonly files/boot/uboot.mkimage "${BOOT_DIR}/uboot.mkimage"
               printf "# Set the kernel boot command line\nsetenv bootargs \"earlyprintk ${CMDLINE}\"\n\n$(cat ${BOOT_DIR}/uboot.mkimage)" > "${BOOT_DIR}/uboot.mkimage"
               if [ "$ENABLE_INITRAMFS" = true ] ; then
                 # Convert generated initramfs for U-Boot using mkimage
                 chroot_exec /usr/sbin/mkimage -A "${KERNEL_ARCH}" -T ramdisk -C none -n "initramfs-${KERNEL_VERSION}" -d "/boot/firmware/initramfs-${KERNEL_VERSION}" "/boot/firmware/initramfs-${KERNEL_VERSION}.uboot"
                 # Remove original initramfs file
                 rm -f "${BOOT_DIR}/initramfs-${KERNEL_VERSION}"
                 # Configure U-Boot to load generated initramfs
                 printf "# Set initramfs file\nsetenv initramfs initramfs-${KERNEL_VERSION}.uboot\n\n$(cat ${BOOT_DIR}/uboot.mkimage)" > "${BOOT_DIR}/uboot.mkimage"
                 printf "\nbootz \${kernel_addr_r} \${ramdisk_addr_r} \${fdt_addr_r}" >> "${BOOT_DIR}/uboot.mkimage"
               else # ENABLE_INITRAMFS=false
                 # Remove initramfs from U-Boot mkfile
                 sed -i '/.*initramfs.*/d' "${BOOT_DIR}/uboot.mkimage"
                 if [ "$BUILD_KERNEL" = false ] ; then
                   # Remove dtbfile from U-Boot mkfile
                   sed -i '/.*dtbfile.*/d' "${BOOT_DIR}/uboot.mkimage"
                   printf "\nbootz \${kernel_addr_r}" >> "${BOOT_DIR}/uboot.mkimage"
                 else
                   printf "\nbootz \${kernel_addr_r} - \${fdt_addr_r}" >> "${BOOT_DIR}/uboot.mkimage"
                 fi
               fi
               # Set mkfile to use the correct dtb file
               sed -i "s/^\(setenv dtbfile \).*/\1${DTB_FILE}/" "${BOOT_DIR}/uboot.mkimage"
               # Set mkfile to use kernel image
               sed -i "s/^\(fatload mmc 0:1 \${kernel_addr_r} \).*/\1${KERNEL_IMAGE}/" "${BOOT_DIR}/uboot.mkimage"
               # Remove all leading blank lines
               sed -i "/./,\$!d" "${BOOT_DIR}/uboot.mkimage"
               # Generate U-Boot bootloader image
               chroot_exec /usr/sbin/mkimage -A "${KERNEL_ARCH}" -O linux -T script -C none -a 0x00000000 -e 0x00000000 -n "RPi${RPI_MODEL}" -d /boot/firmware/uboot.mkimage /boot/firmware/boot.scr
               # Remove U-Boot sources
               rm -fr "${R}/tmp/u-boot"
             fi

bootstrap.d/42-fbturbo.sh +2 -2

             #
             # Build and Setup fbturbo Xorg driver
             #
             # Load utility functions
             . ./functions.sh
             if [ "$ENABLE_FBTURBO" = true ] ; then
               # Install c/c++ build environment inside the chroot
               chroot_install_cc
               # Copy existing fbturbo sources into chroot directory
               if [ -n "$FBTURBOSRC_DIR" ] && [ -d "$FBTURBOSRC_DIR" ] ; then
                 # Copy local fbturbo sources
                 cp -r "${FBTURBOSRC_DIR}" "${R}/tmp"
               else
                 # Create temporary directory for fbturbo sources
-                temp_dir=$(sudo -u nobody mktemp -d)
+                temp_dir=$(as_nobody mktemp -d)
                 # Fetch fbturbo sources
-                sudo -u nobody git -C "${temp_dir}" clone "${FBTURBO_URL}"
+                as_nobody git -C "${temp_dir}" clone "${FBTURBO_URL}"
                 # Move downloaded fbturbo sources
                 mv "${temp_dir}/xf86-video-fbturbo" "${R}/tmp/"
                 # Remove temporary directory for fbturbo sources
                 rm -fr "${temp_dir}"
               fi
               # Install Xorg build dependencies
               if [ "$RELEASE" = "jessie" ] ; then
                 chroot_exec apt-get -q -y --no-install-recommends install xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev
               elif [ "$RELEASE" = "stretch" ] ; then
                 chroot_exec apt-get -q -y --no-install-recommends --allow-unauthenticated install xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev
               fi
               # Build and install fbturbo driver inside chroot
               chroot_exec /bin/bash -x <<'EOF'
             cd /tmp/xf86-video-fbturbo
             autoreconf -vi
             ./configure --prefix=/usr
             make
             make install
             EOF
               # Install fbturbo driver Xorg configuration
               install_readonly files/xorg/99-fbturbo.conf "${R}/usr/share/X11/xorg.conf.d/99-fbturbo.conf"
               # Remove Xorg build dependencies
               chroot_exec apt-get -qq -y --auto-remove purge xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev
             fi

functions.sh +5 0

             # This file contains utility functions used by rpi23-gen-image.sh
             cleanup (){
               set +x
               set +e
               # Identify and kill all processes still using files
               echo "killing processes using mount point ..."
               fuser -k "${R}"
               sleep 3
               fuser -9 -k -v "${R}"
               # Clean up temporary .password file
               if [ -r ".password" ] ; then
                 shred -zu .password
               fi
               # Clean up all temporary mount points
               echo "removing temporary mount points ..."
               umount -l "${R}/proc" 2> /dev/null
               umount -l "${R}/sys" 2> /dev/null
               umount -l "${R}/dev/pts" 2> /dev/null
               umount "$BUILDDIR/mount/boot/firmware" 2> /dev/null
               umount "$BUILDDIR/mount" 2> /dev/null
               cryptsetup close "${CRYPTFS_MAPPING}" 2> /dev/null
               losetup -d "$ROOT_LOOP" 2> /dev/null
               losetup -d "$FRMW_LOOP" 2> /dev/null
               trap - 0 1 2 3 6
             }
             chroot_exec() {
               # Exec command in chroot
               LANG=C LC_ALL=C DEBIAN_FRONTEND=noninteractive chroot ${R} $*
             }
+            as_nobody() {
+              # Exec command as user nobody
+              sudo -u nobody LANG=C LC_ALL=C $*
+            }
             install_readonly() {
               # Install file with user read-only permissions
               install -o root -g root -m 644 $*
             }
             install_exec() {
               # Install file with root exec permissions
               install -o root -g root -m 744 $*
             }
             use_template () {
               # Test if configuration template file exists
               if [ ! -r "./templates/${CONFIG_TEMPLATE}" ] ; then
                 echo "error: configuration template ${CONFIG_TEMPLATE} not found"
                 exit 1
               fi
               # Load template configuration parameters
               . "./templates/${CONFIG_TEMPLATE}"
             }
             chroot_install_cc() {
               # Install c/c++ build environment inside the chroot
               if [ -z "${COMPILER_PACKAGES}" ] ; then
                 COMPILER_PACKAGES=$(chroot_exec apt-get -s install g++ make bc | grep "^Inst " | awk -v ORS=" " '{ print $2 }')
                 if [ "$RELEASE" = "jessie" ] ; then
                   chroot_exec apt-get -q -y --no-install-recommends install ${COMPILER_PACKAGES}
                 elif [ "$RELEASE" = "stretch" ] ; then
                   chroot_exec apt-get -q -y --allow-unauthenticated --no-install-recommends install ${COMPILER_PACKAGES}
                 fi
               fi
             }
             chroot_remove_cc() {
               # Remove c/c++ build environment from the chroot
               if [ ! -z "${COMPILER_PACKAGES}" ] ; then
                 chroot_exec apt-get -qq -y --auto-remove purge ${COMPILER_PACKAGES}
                 COMPILER_PACKAGES=""
               fi
             }

General Comments 0

Écrire
Preview

Vous devez vous connecter pour laisser un commentaire. Se connecter maintenant

No TODOs yet

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Dépôts
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages