Raspi2-3_GenImage Commit - r628:dc259c47f4af · Collaboration Tremplin des Sciences

Merge pull request #25 from g-vidal/drtyhlpr-master...

Gérard Vidal -

r628:dc259c47f4af

parent child

Context file:

r628:dc259c47f4af

Collapse all files

packages/weewx_3.7.1-1_all.deb created 644 binary 0 0

NO CONTENT: new file 100644, binary diff hidden

README.md +4 -1

             # rpi23-gen-image
             ## Introduction
-            `rpi23-gen-image.sh` is an advanced Debian Linux bootstrapping shell script for generating Debian OS images for all Raspberry Pi computers. The script at this time supports the bootstrapping of the Debian (armhf/armel) releases `stretch` and `buster`. Raspberry Pi 0/1/2/3 images are generated for 32-bit mode only. Raspberry Pi 3 supports 64-bit images that can be generated using custom configuration parameters (```templates/rpi3-stretch-arm64-4.14.y```).
+            `rpi23-gen-image.sh` is an advanced Debian Linux bootstrapping shell script for generating Debian OS images for Raspberry Pi 2 (RPi2) and Raspberry Pi 3 (RPi3) computers. The script at this time supports the bootstrapping of the Debian (armhf) releases `jessie`, `stretch` and `buster`. Raspberry Pi 3 images are generated for 32-bit mode only. Raspberry Pi 3 64-bit images can be generated using custom configuration parameters (```templates/rpi3-stretch-arm64-4.11.y```).
             ## Build dependencies
             The following list of Debian packages must be installed on the build system because they are essentially required for the bootstrapping process. The script will check if all required packages are installed and missing packages will be installed automatically if confirmed by the user.
               ```debootstrap debian-archive-keyring qemu-user-static binfmt-support dosfstools rsync bmap-tools whois git bc psmisc dbus sudo```
             It is recommended to configure the `rpi23-gen-image.sh` script to build and install the latest Raspberry Pi Linux kernel. For the Raspberry 3 this is mandatory. Kernel compilation and linking will be performed on the build system using an ARM (armhf/armel) cross-compiler toolchain.
             The script has been tested using the default `crossbuild-essential-armhf` and `crossbuild-essential-armel` toolchain meta packages on Debian Linux `stretch` build systems. Please check the [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains) for further information.
             ## Command-line parameters
             The script accepts certain command-line parameters to enable or disable specific OS features, services and configuration settings. These parameters are passed to the `rpi23-gen-image.sh` script via (simple) shell-variables. Unlike environment shell-variables (simple) shell-variables are defined at the beginning of the command-line call of the `rpi23-gen-image.sh` script.
             ##### Command-line examples:
             ```shell
             ENABLE_UBOOT=true ./rpi23-gen-image.sh
             ENABLE_CONSOLE=false ENABLE_IPV6=false ./rpi23-gen-image.sh
             ENABLE_WM=xfce4 ENABLE_FBTURBO=true ENABLE_MINBASE=true ./rpi23-gen-image.sh
             ENABLE_HARDNET=true ENABLE_IPTABLES=true /rpi23-gen-image.sh
             APT_SERVER=ftp.de.debian.org APT_PROXY="http://127.0.0.1:3142/" ./rpi23-gen-image.sh
             ENABLE_MINBASE=true ./rpi23-gen-image.sh
             BUILD_KERNEL=true ENABLE_MINBASE=true ENABLE_IPV6=false ./rpi23-gen-image.sh
             BUILD_KERNEL=true KERNELSRC_DIR=/tmp/linux ./rpi23-gen-image.sh
             ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
             ENABLE_CRYPTFS=true CRYPTFS_PASSWORD=changeme EXPANDROOT=false ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
             RELEASE=stretch BUILD_KERNEL=true ./rpi23-gen-image.sh
             RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
             RELEASE=stretch RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
             ```
             ## Configuration template files
             To avoid long lists of command-line parameters and to help to store the favourite parameter configurations the `rpi23-gen-image.sh` script supports so called configuration template files (`CONFIG_TEMPLATE`=template). These are simple text files located in the `./templates` directory that contain the list of configuration parameters that will be used. New configuration template files can be added to the `./templates` directory.
             ##### Command-line examples:
             ```shell
             CONFIG_TEMPLATE=rpi3stretch ./rpi23-gen-image.sh
             CONFIG_TEMPLATE=rpi2stretch ./rpi23-gen-image.sh
             ```
             ## Supported parameters and settings
             #### APT settings:
             ##### `APT_SERVER`="ftp.debian.org"
             Set Debian packages server address. Choose a server from the list of Debian worldwide [mirror sites](https://www.debian.org/mirror/list). Using a nearby server will probably speed-up all required downloads within the bootstrapping process.
             ##### `APT_PROXY`=""
             Set Proxy server address. Using a local Proxy-Cache like `apt-cacher-ng` will speed-up the bootstrapping process because all required Debian packages will only be downloaded from the Debian mirror site once. If `apt-cacher-ng` is running on default `http://127.0.0.1:3142` it is autodetected and you don't need to set this.
             ##### `KEEP_APT_PROXY`=false
             Keep the APT_PROXY settings used in the bootsrapping process in the generated image.
             ##### `APT_INCLUDES`=""
             A comma-separated list of additional packages to be installed by debootstrap during bootstrapping.
             ##### `APT_INCLUDES_LATE`=""
             A comma-separated list of additional packages to be installed by apt after bootstrapping and after APT sources are set up.  This is useful for packages with pre-depends, which debootstrap do not handle well.
             ---
             #### General system settings:
             ##### `SET_ARCH`=32
             Set Architecture to default 32bit. If you want to compile 64-bit (RPI3 or RPI3+) set it to `64`. This option will set every needed cross-compiler or board specific option for a successful build.
             ##### `RPI_MODEL`=2
             Specify the target Raspberry Pi hardware model. The script at this time supports the following Raspberry Pi models:
             - `0`  = Raspberry Pi 0 and Raspberry Pi 0 W
             - `1`  = Raspberry Pi 1 model A and B
             - `1P` = Raspberry Pi 1 model B+ and A+
             - `2`  = Raspberry Pi 2 model B
             - `3`  = Raspberry Pi 3 model B
             - `3P` = Raspberry Pi 3 model B+
             ##### `RELEASE`="buster"
             Set the desired Debian release name. The script at this time supports the bootstrapping of the Debian releases `stretch` and `buster`.
             ##### `RELEASE_ARCH`="armhf"
             Set the desired Debian release architecture.
             ##### `HOSTNAME`="rpi$RPI_MODEL-$RELEASE"
             Set system hostname. It's recommended that the hostname is unique in the corresponding subnet.
             ##### `PASSWORD`="raspberry"
             Set system `root` password. It's **STRONGLY** recommended that you choose a custom password.
             ##### `USER_PASSWORD`="raspberry"
             Set password for the created non-root user `USER_NAME`=pi. Ignored if `ENABLE_USER`=false. It's **STRONGLY** recommended that you choose a custom password.
             ##### `DEFLOCAL`="en_US.UTF-8"
             Set default system locale. This setting can also be changed inside the running OS using the `dpkg-reconfigure locales` command. Please note that on using this parameter the script will automatically install the required packages `locales`, `keyboard-configuration` and `console-setup`.
             ##### `TIMEZONE`="Europe/Berlin"
             Set default system timezone. All available timezones can be found in the `/usr/share/zoneinfo/` directory. This setting can also be changed inside the running OS using the `dpkg-reconfigure tzdata` command.
             ##### `EXPANDROOT`=true
             Expand the root partition and filesystem automatically on first boot.
             ##### `ENABLE_DPHYSSWAP`=true
             Enable swap. The size of the swapfile is chosen relative to the size of the root partition. It'll use the `dphys-swapfile` package for that.
             ##### `ENABLE_QEMU`=false
             Generate kernel (`vexpress_defconfig`), file system image (`qcow2`) and DTB files that can be used for QEMU full system emulation (`vexpress-A15`). The output files are stored in the `$(pwd)/images/qemu` directory. You can find more information about running the generated image in the QEMU section of this readme file.
             ---
             #### Keyboard settings:
             These options are used to configure keyboard layout in `/etc/default/keyboard` for console and Xorg. These settings can also be changed inside the running OS using the `dpkg-reconfigure keyboard-configuration` command.
             ##### `XKB_MODEL`=""
             Set the name of the model of your keyboard type.
             ##### `XKB_LAYOUT`=""
             Set the supported keyboard layout(s).
             ##### `XKB_VARIANT`=""
             Set the supported variant(s) of the keyboard layout(s).
             ##### `XKB_OPTIONS`=""
             Set extra xkb configuration options.
             ---
             #### Networking settings (DHCP):
             This parameter is used to set up networking auto-configuration in `/etc/systemd/network/eth.network`. The default location of network configuration files in the Debian `stretch` release was changed to `/lib/systemd/network`.`
             ##### `ENABLE_DHCP`=true
             Set the system to use DHCP. This requires an DHCP server.
             ---
             #### Networking settings (static):
             These parameters are used to set up a static networking configuration in `/etc/systemd/network/eth.network`. The following static networking parameters are only supported if `ENABLE_DHCP` was set to `false`. The default location of network configuration files in the Debian `stretch` release was changed to `/lib/systemd/network`.
             ##### `NET_ADDRESS`=""
             Set a static IPv4 or IPv6 address and its prefix, separated by "/", eg. "192.169.0.3/24".
             ##### `NET_GATEWAY`=""
             Set the IP address for the default gateway.
             ##### `NET_DNS_1`=""
             Set the IP address for the first DNS server.
             ##### `NET_DNS_2`=""
             Set the IP address for the second DNS server.
             ##### `NET_DNS_DOMAINS`=""
             Set the default DNS search domains to use for non fully qualified hostnames.
             ##### `NET_NTP_1`=""
             Set the IP address for the first NTP server.
             ##### `NET_NTP_2`=""
             Set the IP address for the second NTP server.
             ---
             #### Basic system features:
             ##### `ENABLE_CONSOLE`=true
             Enable serial console interface. Recommended if no monitor or keyboard is connected to the RPi2/3. In case of problems fe. if the network (auto) configuration failed - the serial console can be used to access the system. On RPI `0` `3` `3P` the CPU speed is locked at lowest speed.
             ##### `ENABLE_PRINTK`=false
             Enables printing kernel messages to konsole. printk is `3 4 1 3` as in raspbian.
             ##### `ENABLE_BLUETOOTH`=false
             Enable onboard Bluetooth interface on the RPi0/3/3P. See: [Configuring the GPIO serial port on Raspbian jessie and stretch](https://spellfoundry.com/2016/05/29/configuring-gpio-serial-port-raspbian-jessie-including-pi-3/).
             ##### `ENABLE_MINIUART_OVERLAY`=false
             Enable Bluetooth to use this. Adds overlay to swap UART0 with UART1. Enabling (slower) Bluetooth and full speed serial console. - RPI `0` `3` `3P` have a fast `hardware UART0` (ttyAMA0) and a `mini UART1` (ttyS0)! RPI `1` `1P` `2` only have a `hardware UART0`. `UART0` is considered better, because is faster and more stable than `mini UART1`. By default the Bluetooth modem is mapped to the `hardware UART0` and `mini UART` is used for console. The `mini UART` is a problem for the serial console, because its baudrate depends on the CPU frequency, which is changing on runtime. Resulting in a volatile baudrate and thus in an unusable serial console.
             ##### `ENABLE_TURBO`=false
             Enable Turbo mode. This setting locks cpu at the highest frequency. As setting ENABLE_CONSOLE=true locks RPI to lowest CPU speed, this is can be used additionally to lock cpu hat max speed. Need a good power supply and probably cooling for the Raspberry PI.
             ##### `ENABLE_I2C`=false
             Enable I2C interface on the RPi 0/1/2/3. Please check the [RPi 0/1/2/3 pinout diagrams](https://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins.
             ##### `ENABLE_SPI`=false
             Enable SPI interface on the RPi 0/1/2/3. Please check the [RPi 0/1/2/3 pinout diagrams](https://elinux.org/RPi_Low-level_peripherals) to connect the right GPIO pins.
             ##### `ENABLE_IPV6`=true
             Enable IPv6 support. The network interface configuration is managed via systemd-networkd.
             ##### `ENABLE_SSHD`=true
             Install and enable OpenSSH service. The default configuration of the service doesn't allow `root` to login. Please use the user `pi` instead and `su -` or `sudo` to execute commands as root.
             ##### `ENABLE_NONFREE`=false
             Allow the installation of non-free Debian packages that do not comply with the DFSG. This is required to install closed-source firmware binary blobs.
             ##### `ENABLE_WIRELESS`=false
             Download and install the [closed-source firmware binary blob](https://github.com/RPi-Distro/firmware-nonfree/raw/master/brcm) that is required to run the internal wireless interface of the Raspberry Pi model `3`. This parameter is ignored if the specified `RPI_MODEL` is not `3`.
             ##### `ENABLE_RSYSLOG`=true
             If set to false, disable and uninstall rsyslog (so logs will be available only in journal files)
             ##### `ENABLE_SOUND`=true
             Enable sound hardware and install Advanced Linux Sound Architecture.
             ##### `ENABLE_HWRANDOM`=true
             Enable Hardware Random Number Generator. Strong random numbers are important for most network-based communications that use encryption. It's recommended to be enabled.
             ##### `ENABLE_MINGPU`=false
             Minimize the amount of shared memory reserved for the GPU. It doesn't seem to be possible to fully disable the GPU.
             ##### `ENABLE_DBUS`=true
             Install and enable D-Bus message bus. Please note that systemd should work without D-bus but it's recommended to be enabled.
             ##### `ENABLE_XORG`=false
             Install Xorg open-source X Window System.
             ##### `ENABLE_WM`=""
             Install a user-defined window manager for the X Window System. To make sure all X related package dependencies are getting installed `ENABLE_XORG` will automatically get enabled if `ENABLE_WM` is used. The `rpi23-gen-image.sh` script has been tested with the following list of window managers: `blackbox`, `openbox`, `fluxbox`, `jwm`, `dwm`, `xfce4`, `awesome`.
             ##### `ENABLE_SYSVINIT`=false
             Support for halt,init,poweroff,reboot,runlevel,shutdown,telinit commands
             ---
             #### Advanced system features:
             ##### `ENABLE_SYSTEMDSWAP`=false
             Enables [Systemd-swap service](https://github.com/Nefelim4ag/systemd-swap). Usefull if `KERNEL_ZSWAP` is enabled.
             ##### `ENABLE_MINBASE`=false
             Use debootstrap script variant `minbase` which only includes essential packages and apt. This will reduce the disk usage by about 65 MB.
             ##### `ENABLE_REDUCE`=false
             Reduce the disk space usage by deleting packages and files. See `REDUCE_*` parameters for detailed information.
             ##### `ENABLE_UBOOT`=false
             Replace the default RPi 0/1/2/3 second stage bootloader (bootcode.bin) with [U-Boot bootloader](https://git.denx.de/?p=u-boot.git;a=summary). U-Boot can boot images via the network using the BOOTP/TFTP protocol.
             ##### `UBOOTSRC_DIR`=""
             Path to a directory (`u-boot`) of [U-Boot bootloader sources](https://git.denx.de/?p=u-boot.git;a=summary) that will be copied, configured, build and installed inside the chroot.
             ##### `ENABLE_FBTURBO`=false
             Install and enable the [hardware accelerated Xorg video driver](https://github.com/ssvb/xf86-video-fbturbo) `fbturbo`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling.
             ##### `FBTURBOSRC_DIR`=""
             Path to a directory (`xf86-video-fbturbo`) of [hardware accelerated Xorg video driver sources](https://github.com/ssvb/xf86-video-fbturbo) that will be copied, configured, build and installed inside the chroot.
             ##### `ENABLE_VIDEOCORE`=false
             Install and enable the [ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) `vcgencmd`. Please note that this driver is currently limited to hardware accelerated window moving and scrolling.
             ##### `VIDEOCORESRC_DIR`=""
             Path to a directory (`userland`) of [ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) that will be copied, configured, build and installed inside the chroot.
             ##### `ENABLE_NEXMON`=false
             Install and enable the [Source code for a C-based firmware patching framework for Broadcom/Cypress WiFi chips that enables you to write your own firmware patches, for example, to enable monitor mode with radiotap headers and frame injection](https://github.com/seemoo-lab/nexmon.git).
             ##### `NEXMONSRC_DIR`=""
             Path to a directory (`nexmon`) of [Source code for ARM side libraries for interfacing to Raspberry Pi GPU](https://github.com/raspberrypi/userland) that will be copied, configured, build and installed inside the chroot.
             ##### `ENABLE_IPTABLES`=false
             Enable iptables IPv4/IPv6 firewall. Simplified ruleset: Allow all outgoing connections. Block all incoming connections except to OpenSSH service.
             ##### `ENABLE_USER`=true
             Create non-root user with password `USER_PASSWORD`=raspberry. Unless overridden with `USER_NAME`=user, the username will be `pi`.
             ##### `USER_NAME`=pi
             Non-root user to create.  Ignored if `ENABLE_USER`=false
             ##### `ENABLE_ROOT`=false
             Set root user password so root login will be enabled
             ##### `ENABLE_HARDNET`=false
             Enable IPv4/IPv6 network stack hardening settings.
             ##### `ENABLE_SPLITFS`=false
             Enable having root partition on an USB drive by creating two image files: one for the `/boot/firmware` mount point, and another for `/`.
             ##### `CHROOT_SCRIPTS`=""
             Path to a directory with scripts that should be run in the chroot before the image is finally built. Every executable file in this directory is run in lexicographical order.
             ##### `ENABLE_INITRAMFS`=false
             Create an initramfs that that will be loaded during the Linux startup process. `ENABLE_INITRAMFS` will automatically get enabled if `ENABLE_CRYPTFS`=true. This parameter will be ignored if `BUILD_KERNEL`=false.
             ##### `ENABLE_IFNAMES`=true
             Enable automatic assignment of predictable, stable network interface names for all local Ethernet, WLAN interfaces. This might create complex and long interface names.
             ##### `ENABLE_SPLASH`=true
             Enable default Raspberry Pi boot up rainbow splash screen.
             ##### `ENABLE_LOGO`=true
             Enable default Raspberry Pi console logo (image of four raspberries in the top left corner).
             ##### `ENABLE_SILENT_BOOT`=false
             Set the verbosity of console messages shown during boot up to a strict minimum.
             ##### `DISABLE_UNDERVOLT_WARNINGS`=
             Disable RPi2/3 under-voltage warnings and overlays. Setting the parameter to `1` will disable the warning overlay. Setting it to `2` will additionally allow RPi2/3 turbo mode when low-voltage is present.
             ---
             #### SSH settings:
             ##### `SSH_ENABLE_ROOT`=false
             Enable password-based root login via SSH. This may be a security risk with the default password set, use only in trusted environments. `ENABLE_ROOT` must be set to `true`.
             ##### `SSH_DISABLE_PASSWORD_AUTH`=false
             Disable password-based SSH authentication. Only public key based SSH (v2) authentication will be supported.
             ##### `SSH_LIMIT_USERS`=false
             Limit the users that are allowed to login via SSH. Only allow user `USER_NAME`=pi and root if `SSH_ENABLE_ROOT`=true to login. This parameter will be ignored if `dropbear` SSH is used (`REDUCE_SSHD`=true).
             ##### `SSH_ROOT_PUB_KEY`=""
             Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `root`. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported. `ENABLE_ROOT` **and** `SSH_ENABLE_ROOT` must be set to `true`.
             ##### `SSH_USER_PUB_KEY`=""
             Add SSH (v2) public key(s) from specified file to `authorized_keys` file to enable public key based SSH (v2) authentication of user `USER_NAME`=pi. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported.
             ---
             #### Kernel compilation:
             ##### `BUILD_KERNEL`=true
             Build and install the latest RPi 0/1/2/3 Linux kernel. Currently only the default RPi 0/1/2/3 kernel configuration is used.
             ##### `CROSS_COMPILE`="arm-linux-gnueabihf-"
             This sets the cross-compile environment for the compiler.
             ##### `KERNEL_ARCH`="arm"
             This sets the kernel architecture for the compiler.
             ##### `KERNEL_IMAGE`="kernel7.img"
             Name of the image file in the boot partition. If not set, `KERNEL_IMAGE` will be set to "kernel8.img" automatically if building for arm64.
             ##### `KERNEL_BRANCH`=""
             Name of the requested branch from the GIT location for the RPi Kernel. Default is using the current default branch from the GIT site.
             ##### `QEMU_BINARY`="/usr/bin/qemu-arm-static"
             Sets the QEMU enviornment for the Debian archive. If not set, `QEMU_BINARY` will be set to "/usr/bin/qemu-aarch64-static" automatically if building for arm64.
             ##### `KERNEL_DEFCONFIG`="bcm2709_defconfig"
             Sets the default config for kernel compiling. If not set, `KERNEL_DEFCONFIG` will be set to "bcmrpi3\_defconfig" automatically if building for arm64.
             ##### `KERNEL_REDUCE`=false
             Reduce the size of the generated kernel by removing unwanted devices, network and filesystem drivers (experimental).
             ##### `KERNEL_THREADS`=1
             Number of parallel kernel building threads. If the parameter is left untouched the script will automatically determine the number of CPU cores to set the number of parallel threads to speed the kernel compilation.
             ##### `KERNEL_HEADERS`=true
             Install kernel headers with the built kernel.
             ##### `KERNEL_MENUCONFIG`=false
             Start `make menuconfig` interactive menu-driven kernel configuration. The script will continue after `make menuconfig` was terminated.
             ##### `KERNEL_OLDDEFCONFIG`=false
             Run `make olddefconfig` to automatically set all new kernel configuration options to their recommended default values.
             ##### `KERNEL_CCACHE`=false
             Compile the kernel using ccache. This speeds up kernel recompilation by caching previous compilations and detecting when the same compilation is being done again.
             ##### `KERNEL_REMOVESRC`=true
             Remove all kernel sources from the generated OS image after it was built and installed.
             ##### `KERNELSRC_DIR`=""
             Path to a directory (`linux`) of [RaspberryPi Linux kernel sources](https://github.com/raspberrypi/linux) that will be copied, configured, build and installed inside the chroot.
             ##### `KERNELSRC_CLEAN`=false
             Clean the existing kernel sources directory `KERNELSRC_DIR` (using `make mrproper`) after it was copied to the chroot and before the compilation of the kernel has started. This parameter will be ignored if no `KERNELSRC_DIR` was specified or if `KERNELSRC_PREBUILT`=true.
             ##### `KERNELSRC_CONFIG`=true
             Run `make bcm2709_defconfig` (and optional `make menuconfig`) to configure the kernel sources before building. This parameter is automatically set to `true` if no existing kernel sources directory was specified using `KERNELSRC_DIR`. This parameter is ignored if `KERNELSRC_PREBUILT`=true.
             ##### `KERNELSRC_USRCONFIG`=""
             Copy own config file to kernel `.config`. If `KERNEL_MENUCONFIG`=true then running after copy.
             ##### `KERNELSRC_PREBUILT`=false
             With this parameter set to true the script expects the existing kernel sources directory to be already successfully cross-compiled. The parameters `KERNELSRC_CLEAN`, `KERNELSRC_CONFIG`, `KERNELSRC_USRCONFIG` and `KERNEL_MENUCONFIG` are ignored and no kernel compilation tasks are performed.
             ##### `RPI_FIRMWARE_DIR`=""
             The directory (`firmware`) containing a local copy of the firmware from the [RaspberryPi firmware project](https://github.com/raspberrypi/firmware). Default is to download the latest firmware directly from the project.
             ##### `KERNEL_DEFAULT_GOV`="ONDEMAND"
             Set the default cpu governor at kernel compilation. Supported values are: PERFORMANCE POWERSAVE USERSPACE ONDEMAND CONSERVATIVE SCHEDUTIL
             ##### `KERNEL_NF`=false
             Enable Netfilter modules as kernel modules
             ##### `KERNEL_VIRT`=false
             Enable Kernel KVM support (/dev/kvm)
             ##### `KERNEL_ZSWAP`=false
             Enable Kernel Zswap support. Best use on high RAM load and mediocre CPU load usecases
             ##### `KERNEL_BPF`=true
             Allow attaching eBPF programs to a cgroup using the bpf syscall (CONFIG_BPF_SYSCALL CONFIG_CGROUP_BPF) [systemd compilations about it - File /lib/systemd/system/systemd-journald.server:36 configures an IP firewall (IPAddressDeny=all), but the local system does not support BPF/cgroup based firewalls]
             ##### `KERNEL_SECURITY`=false
             Enables Apparmor, integrity subsystem, auditing.
             ---
             #### Reduce disk usage:
             The following list of parameters is ignored if `ENABLE_REDUCE`=false.
             ##### `REDUCE_APT`=true
             Configure APT to use compressed package repository lists and no package caching files.
             ##### `REDUCE_DOC`=true
             Remove all doc files (harsh). Configure APT to not include doc files on future `apt-get` package installations.
             ##### `REDUCE_MAN`=true
             Remove all man pages and info files (harsh).  Configure APT to not include man pages on future `apt-get` package installations.
             ##### `REDUCE_VIM`=false
             Replace `vim-tiny` package by `levee` a tiny vim clone.
             ##### `REDUCE_BASH`=false
             Remove `bash` package and switch to `dash` shell (experimental).
             ##### `REDUCE_HWDB`=true
             Remove PCI related hwdb files (experimental).
             ##### `REDUCE_SSHD`=true
             Replace `openssh-server` with `dropbear`.
             ##### `REDUCE_LOCALE`=true
             Remove all `locale` translation files.
             ---
             #### Encrypted root partition:
             ##### `ENABLE_CRYPTFS`=false
             Enable full system encryption with dm-crypt. Setup a fully LUKS encrypted root partition (aes-xts-plain64:sha512) and generate required initramfs. The /boot directory will not be encrypted. This parameter will be ignored if `BUILD_KERNEL`=false. `ENABLE_CRYPTFS` is experimental. SSH-to-initramfs is currently not supported but will be soon - feel free to help.
             ##### `CRYPTFS_PASSWORD`=""
             Set password of the encrypted root partition. This parameter is mandatory if `ENABLE_CRYPTFS`=true.
             ##### `CRYPTFS_MAPPING`="secure"
             Set name of dm-crypt managed device-mapper mapping.
             ##### `CRYPTFS_CIPHER`="aes-xts-plain64:sha512"
             Set cipher specification string. `aes-xts*` ciphers are strongly recommended.
             ##### `CRYPTFS_XTSKEYSIZE`=512
             Sets key size in bits. The argument has to be a multiple of 8.
             ##### `CRYPTFS_DROPBEAR`=false
             Enable Dropbear Initramfs support
             ##### `CRYPTFS_DROPBEAR_PUBKEY`=""
             Provide path to dropbear Public RSA-OpenSSH Key
             ---
             #### Build settings:
             ##### `BASEDIR`=$(pwd)/images/${RELEASE}
             Set a path to a working directory used by the script to generate an image.
             ##### `IMAGE_NAME`=${BASEDIR}/${DATE}-${KERNEL_ARCH}-${KERNEL_BRANCH}-rpi${RPI_MODEL}-${RELEASE}-${RELEASE_ARCH}
             Set a filename for the output file(s). Note: the script will create $IMAGE_NAME.img if `ENABLE_SPLITFS`=false or $IMAGE_NAME-frmw.img and $IMAGE_NAME-root.img if `ENABLE_SPLITFS`=true. Note 2: If the KERNEL_BRANCH is not set, the word "CURRENT" is used.
             ## Understanding the script
             The functions of this script that are required for the different stages of the bootstrapping are split up into single files located inside the `bootstrap.d` directory. During the bootstrapping every script in this directory gets executed in lexicographical order:
             | Script | Description |
             | --- | --- |
             | `10-bootstrap.sh` | Debootstrap basic system |
             | `11-apt.sh` | Setup APT repositories |
             | `12-locale.sh` | Setup Locales and keyboard settings |
             | `13-kernel.sh` | Build and install RPi 0/1/2/3 Kernel |
             | `14-fstab.sh` | Setup fstab and initramfs |
             | `15-rpi-config.sh` | Setup RPi 0/1/2/3 config and cmdline |
             | `20-networking.sh` | Setup Networking |
             | `21-firewall.sh` | Setup Firewall |
             | `30-security.sh` | Setup Users and Security settings |
             | `31-logging.sh` | Setup Logging |
             | `32-sshd.sh` | Setup SSH and public keys |
             | `41-uboot.sh` | Build and Setup U-Boot |
             | `42-fbturbo.sh` | Build and Setup fbturbo Xorg driver |
             | `43-videocore.sh` | Build and Setup videocore libraries |
             | `50-firstboot.sh` | First boot actions |
             | `99-reduce.sh` | Reduce the disk space usage |
             All the required configuration files that will be copied to the generated OS image are located inside the `files` directory. It is not recommended to modify these configuration files manually.
             | Directory | Description |
             | --- | --- |
             | `apt` | APT management configuration files |
             | `boot` | Boot and RPi 0/1/2/3 configuration files |
             | `dpkg` | Package Manager configuration |
             | `etc` | Configuration files and rc scripts |
             | `firstboot` | Scripts that get executed on first boot  |
             | `initramfs` | Initramfs scripts |
             | `iptables` | Firewall configuration files |
             | `locales` | Locales configuration |
             | `modules` | Kernel Modules configuration |
             | `mount` | Fstab configuration |
             | `network` | Networking configuration files |
             | `sysctl.d` | Swapping and Network Hardening configuration |
             | `xorg` | fbturbo Xorg driver configuration |
             ## Custom packages and scripts
             Debian custom packages, i.e. those not in the debian repositories, can be installed by placing them in the `packages` directory. They are installed immediately after packages from the repositories are installed. Any dependencies listed in the custom packages will be downloaded automatically from the repositories. Do not list these custom packages in `APT_INCLUDES`.
             Scripts in the custom.d directory will be executed after all other installation is complete but before the image is created.
             ## Logging of the bootstrapping process
             All information related to the bootstrapping process and the commands executed by the `rpi23-gen-image.sh` script can easily be saved into a logfile. The common shell command `script` can be used for this purpose:
             ```shell
             script -c 'APT_SERVER=ftp.de.debian.org ./rpi23-gen-image.sh' ./build.log
             ```
             ## Flashing the image file
             After the image file was successfully created by the `rpi23-gen-image.sh` script it can be copied to the microSD card that will be used by the RPi 0/1/2/3 computer. This can be performed by using the tools `bmaptool` or `dd`. Using `bmaptool` will probably speed-up the copy process because `bmaptool` copies more wisely than `dd`.
             ##### Flashing examples:
             ```shell
             bmaptool copy ./images/buster/2017-01-23-rpi3-buster.img /dev/mmcblk0
             dd bs=4M if=./images/buster/2017-01-23-rpi3-buster.img of=/dev/mmcblk0
             ```
             If you have set `ENABLE_SPLITFS`, copy the `-frmw` image on the microSD card, then the `-root` one on the USB drive:
             ```shell
             bmaptool copy ./images/buster/2017-01-23-rpi3-buster-frmw.img /dev/mmcblk0
             bmaptool copy ./images/buster/2017-01-23-rpi3-buster-root.img /dev/sdc
             ```
             ## QEMU emulation
             Start QEMU full system emulation:
             ```shell
             qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=tty1"
             ```
             Start QEMU full system emulation and output to console:
             ```shell
             qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
             ```
             Start QEMU full system emulation with SMP and output to console:
             ```shell
             qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -smp cpus=2,maxcpus=2 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
             ```
             Start QEMU full system emulation with cryptfs, initramfs and output to console:
             ```shell
             qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -initrd "initramfs-${KERNEL_VERSION}" -append "root=/dev/mapper/secure cryptdevice=/dev/mmcblk0p2:secure rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio
             ```
             ## External links and references
             * [Debian worldwide mirror sites](https://www.debian.org/mirror/list)
             * [Debian Raspberry Pi 2 Wiki](https://wiki.debian.org/RaspberryPi2)
             * [Debian CrossToolchains Wiki](https://wiki.debian.org/CrossToolchains)
             * [Official Raspberry Pi Firmware on github](https://github.com/raspberrypi/firmware)
             * [Official Raspberry Pi Kernel on github](https://github.com/raspberrypi/linux)
             * [U-BOOT git repository](https://git.denx.de/?p=u-boot.git;a=summary)
             * [Xorg DDX driver fbturbo](https://github.com/ssvb/xf86-video-fbturbo)
             * [RPi3 Wireless interface firmware](https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm)
             * [Collabora RPi2 Kernel precompiled](https://repositories.collabora.co.uk/debian/)

bootstrap.d/10-bootstrap.sh +7 0

             #
             # Debootstrap basic system
             #
             # Load utility functions
             . ./functions.sh
             VARIANT=""
             COMPONENTS="main"
             # Use non-free Debian packages if needed
             if [ "$ENABLE_NONFREE" = true ] ; then
               COMPONENTS="main,non-free,contrib"
             fi
             # Use minbase bootstrap variant which only includes essential packages
             if [ "$ENABLE_MINBASE" = true ] ; then
               VARIANT="--variant=minbase"
             fi
+            # Exclude packages if required by Debian release
+            if [ "$RELEASE" = "stretch" ] || [ "$RELEASE" = "buster" ] ; then
+              EXCLUDES="--exclude=init,systemd-sysv"
+            fi
             # Base debootstrap (unpack only)
             http_proxy=${APT_PROXY} debootstrap ${APT_EXCLUDES} --arch="${RELEASE_ARCH}" --foreign ${VARIANT} --components="${COMPONENTS}" --include="${APT_INCLUDES}" "${RELEASE}" "${R}" "http://${APT_SERVER}/debian"
             # Copy qemu emulator binary to chroot
             install -m 755 -o root -g root "${QEMU_BINARY}" "${R}${QEMU_BINARY}"
             # Copy debian-archive-keyring.pgp
             mkdir -p "${R}/usr/share/keyrings"
             install_readonly /usr/share/keyrings/debian-archive-keyring.gpg "${R}/usr/share/keyrings/debian-archive-keyring.gpg"
             # Complete the bootstrapping process
             chroot_exec /debootstrap/debootstrap --second-stage
             # Mount required filesystems
             mount -t proc none "${R}/proc"
             mount -t sysfs none "${R}/sys"
             # Mount pseudo terminal slave if supported by Debian release
             if [ -d "${R}/dev/pts" ] ; then
               mount --bind /dev/pts "${R}/dev/pts"
             fi

bootstrap.d/11-apt.sh +19 0

             #
             # Setup APT repositories
             #
             # Load utility functions
             . ./functions.sh
             # Install and setup APT proxy configuration
             if [ -z "$APT_PROXY" ] ; then
               install_readonly files/apt/10proxy "${ETC_DIR}/apt/apt.conf.d/10proxy"
               sed -i "s/\"\"/\"${APT_PROXY}\"/" "${ETC_DIR}/apt/apt.conf.d/10proxy"
             fi
+            if [ "$BUILD_KERNEL" = false ] ; then
+              # Install APT pinning configuration for flash-kernel package
+              install_readonly files/apt/flash-kernel "${ETC_DIR}/apt/preferences.d/flash-kernel"
+              # Install APT sources.list
+              install_readonly files/apt/sources.list "${ETC_DIR}/apt/sources.list"
+              echo "deb ${COLLABORA_URL} ${RELEASE} rpi2" >> "${ETC_DIR}/apt/sources.list"
+              # Upgrade collabora package index and install collabora keyring
+              chroot_exec apt-get -qq -y update
+              # Removed --allow-unauthenticated as suggested after modification on _apt privileges
+              chroot_exec apt-get -qq -y install collabora-obs-archive-keyring
+            else # BUILD_KERNEL=true
               # Install APT sources.list
               install_readonly files/apt/sources.list "${ETC_DIR}/apt/sources.list"
               # Use specified APT server and release
               sed -i "s/\/ftp.debian.org\//\/${APT_SERVER}\//" "${ETC_DIR}/apt/sources.list"
+              sed -i "s/ jessie/ ${RELEASE}/" "${ETC_DIR}/apt/sources.list"
+            fi
+            # Use specified APT server and release
+            sed -i "s/\/ftp.debian.org\//\/${APT_SERVER}\//" "${ETC_DIR}/apt/sources.list"
             sed -i "s/ stretch/ ${RELEASE}/" "${ETC_DIR}/apt/sources.list"
             # Upgrade package index and update all installed packages and changed dependencies
             chroot_exec apt-get -qq -y update
             chroot_exec apt-get -qq -y -u dist-upgrade
             # Install additional packages
             if [ "$APT_INCLUDES_LATE" ] ; then
               chroot_exec apt-get -qq -y install $(echo "$APT_INCLUDES_LATE" |tr , ' ')
             fi
             # Install Debian custom packages
             if [ -d packages ] ; then
               for package in packages/*.deb ; do
                 cp "$package" "${R}"/tmp
                 chroot_exec dpkg --unpack /tmp/"$(basename "$package")"
               done
             fi
             chroot_exec apt-get -qq -y -f install
             chroot_exec apt-get -qq -y check

bootstrap.d/42-fbturbo.sh +6 0

             #
             # Build and Setup fbturbo Xorg driver
             #
             # Load utility functions
             . ./functions.sh
             if [ "$ENABLE_FBTURBO" = true ] ; then
               # Install c/c++ build environment inside the chroot
               chroot_install_cc
               # Copy existing fbturbo sources into chroot directory
               if [ -n "$FBTURBOSRC_DIR" ] && [ -d "$FBTURBOSRC_DIR" ] ; then
                 # Copy local fbturbo sources
                 cp -r "${FBTURBOSRC_DIR}" "${R}/tmp"
               else
                 # Create temporary directory for fbturbo sources
                 temp_dir=$(as_nobody mktemp -d)
                 # Fetch fbturbo sources
                 as_nobody git -C "${temp_dir}" clone "${FBTURBO_URL}"
                 # Move downloaded fbturbo sources
                 mv "${temp_dir}/xf86-video-fbturbo" "${R}/tmp/"
                 # Remove temporary directory for fbturbo sources
                 rm -fr "${temp_dir}"
               fi
               # Install Xorg build dependencies
+              if [ "$RELEASE" = "jessie" ] || [ "$RELEASE" = "stretch" ] || [ "$RELEASE" = "buster" ] ; then
+                chroot_exec apt-get -q -y --no-install-recommends install xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev
+              elif [ "$RELEASE" = "stretch" ] || [ "$RELEASE" = "buster" ] ; then
                 chroot_exec apt-get -q -y --no-install-recommends --allow-unauthenticated install xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev
+              fi
               # Build and install fbturbo driver inside chroot
               chroot_exec /bin/bash -x <<'EOF'
             cd /tmp/xf86-video-fbturbo
             autoreconf -vi
             ./configure --prefix=/usr
             make
             make install
             EOF
               # Install fbturbo driver Xorg configuration
               install_readonly files/xorg/99-fbturbo.conf "${R}/usr/share/X11/xorg.conf.d/99-fbturbo.conf"
               # Remove Xorg build dependencies
               chroot_exec apt-get -qq -y --auto-remove purge xorg-dev xutils-dev x11proto-dri2-dev libltdl-dev libtool automake libdrm-dev
             fi

functions.sh +7 -1

             # This file contains utility functions used by rpi23-gen-image.sh
             cleanup (){
               set +x
               set +e
               # Remove exports from nexmon
               unset KERNEL
               unset ARCH
               unset SUBARCH
               unset CCPLUGIN
               unset ZLIBFLATE
               unset Q
               unset NEXMON_SETUP_ENV
               unset HOSTUNAME
               unset PLATFORMUNAME
               # Identify and kill all processes still using files
               echo "killing processes using mount point ..."
               fuser -k "${R}"
               sleep 3
               fuser -9 -k -v "${R}"
               # Clean up temporary .password file
               if [ -r ".password" ] ; then
                 shred -zu .password
               fi
               # Clean up all temporary mount points
               echo "removing temporary mount points ..."
               umount -l "${R}/proc" 2> /dev/null
               umount -l "${R}/sys" 2> /dev/null
               umount -l "${R}/dev/pts" 2> /dev/null
               umount "$BUILDDIR/mount/boot/firmware" 2> /dev/null
               umount "$BUILDDIR/mount" 2> /dev/null
               cryptsetup close "${CRYPTFS_MAPPING}" 2> /dev/null
               losetup -d "$ROOT_LOOP" 2> /dev/null
               losetup -d "$FRMW_LOOP" 2> /dev/null
               trap - 0 1 2 3 6
             }
             chroot_exec() {
               # Exec command in chroot
               LANG=C LC_ALL=C DEBIAN_FRONTEND=noninteractive chroot "${R}" "$@"
             }
             as_nobody() {
               # Exec command as user nobody
               sudo -E -u nobody LANG=C LC_ALL=C "$@"
             }
             install_readonly() {
               # Install file with user read-only permissions
               install -o root -g root -m 644 "$@"
             }
             install_exec() {
               # Install file with root exec permissions
               install -o root -g root -m 744 "$@"
             }
             use_template () {
               # Test if configuration template file exists
               if [ ! -r "./templates/${CONFIG_TEMPLATE}" ] ; then
                 echo "error: configuration template ${CONFIG_TEMPLATE} not found"
                 exit 1
               fi
               # Load template configuration parameters
               . "./templates/${CONFIG_TEMPLATE}"
             }
             chroot_install_cc() {
               # Install c/c++ build environment inside the chroot
               if [ -z "${COMPILER_PACKAGES}" ] ; then
                 COMPILER_PACKAGES=$(chroot_exec apt-get -s install g++ make bc | grep "^Inst " | awk -v ORS=" " '{ print $2 }')
-            	# Install COMPILER_PACKAGES in chroot - NEVER do "${COMPILER_PACKAGES}" -> breaks uboot
+                if [ "$RELEASE" = "jessie" ] || [ "$RELEASE" = "stretch" ] || [ "$RELEASE" = "buster" ] ; then
+                  chroot_exec apt-get -q -y --no-install-recommends install ${COMPILER_PACKAGES}
+                elif [ "$RELEASE" = "stretch" ] || [ "$RELEASE" = "buster" ] ; then
                   chroot_exec apt-get -q -y --allow-unauthenticated --no-install-recommends install ${COMPILER_PACKAGES}
                 fi
+              fi
             }
             chroot_remove_cc() {
               # Remove c/c++ build environment from the chroot
               if [ -n "${COMPILER_PACKAGES}" ] ; then
                 chroot_exec apt-get -qq -y --auto-remove purge ${COMPILER_PACKAGES}
                 COMPILER_PACKAGES=""
               fi
             }
             # https://serverfault.com/a/682849 - converts e.g. /24 to 255.255.255.0
             cdr2mask ()
             {
                # Number of args to shift, 255..255, first non-255 byte, zeroes
                set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0
                [ $1 -gt 1 ] && shift $1 || shift
                echo ${1-0}.${2-0}.${3-0}.${4-0}
             }
             # GPL v2.0 - #https://github.com/sakaki-/bcmrpi3-kernel-bis/blob/master/conform_config.sh
             set_kernel_config() {
               # flag as $1, value to set as $2, config must exist at "./.config"
               TGT="CONFIG_${1#CONFIG_}"
               REP="${2}"
               if grep -q "^${TGT}[^_]" .config; then
                 sed -i "s/^\(${TGT}=.*\|# ${TGT} is not set\)/${TGT}=${REP}/" .config
               else
                 echo "${TGT}"="${2}" >> .config
               fi
             }
             # unset kernel config parameter
             unset_kernel_config() {
               # unsets flag with the value of $1, config must exist at "./.config"
               TGT="CONFIG_${1#CONFIG_}"
               sed -i "s/^${TGT}=.*/# ${TGT} is not set/" .config
             }

templates/raspife2-stretch +83 0

+             Configuration file raspife2 Stretch IFÉ 2017/02/24
+             #
+             APT_SERVER=ftp.fr.debian.org
+             APT_INCLUDES="gnupg,gnupg2,firmware-realtek,firmware-linux-nonfree,firmware-linux,tightvncserver,build-essentia$
+             bison,libboost-all-dev,automake,autoconf,autogen,libtool,pkg-config,checkinstall,python3,python3-dev,menulibre,$
+             libnotify-bin,python,python-configobj,python-cheetah,python-imaging,python-serial,python-usb,python-dev,\
+             pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,jed,i2c-tools,python-smbus,policykit-1,usbutils,\
+             pmount,python-pip,python3-pip,geany,geany-plugin-py,geany-plugin-markdown,firefox-esr,firefox-esr-l10n-fr,\
+             icedtea-8-plugin,openjdk-8-jdk,openjdk-8-jre,openjdk-8-jre-headless,libqtwebkit-dev,libqt5webkit5-dev,\
+             libudev-dev,libzzip-dev,zlib1g-dev,libcanberra-gtk-module,libnss-myhostname,libfreetype6-dev,libpng16-16,\
+             lxsession,openbox-lxde-session,lxde"
+             #----------------------
+             RPI_MODEL=2
+             RELEASE="stretch"
+             HOSTNAME="raspife2"
+             PASSWORD="***********"
+             USER_PASSWORD="**************"
+             DEFLOCAL="fr_FR.UTF-8"
+             TIMEZONE="Europe/Paris"
+             EXPANDROOT=false
+             #-----------------------
+             XKB_MODEL="pc105"
+             XKB_LAYOUT="fr"
+             XKB_VARIANT="latin9"
+             XKB_OPTIONS=""
+             #------------------------
+             ENABLE_DHCP=true
+             #------------------------
+             ENABLE_CONSOLE=true
+             ENABLE_I2C=true
+             ENABLE_SPI=true
+             ENABLE_IPV6=true
+             ENABLE_SSHD=true
+             ENABLE_NONFREE=true
+             ENABLE_WIRELESS=false
+             ENABLE_RSYSLOG=true
+             ENABLE_SOUND=true
+             ENABLE_HWRANDOM=true
+             ENABLE_MINGPU=true
+             ENABLE_DBUS=true
+             ENABLE_XORG=true
+             ENABLE_WM="lxdm"
+             #------------------------
+             ENABLE_MINBASE=false
+             ENABLE_REDUCE=false
+             ENABLE_UBOOT=false
+             ENABLE_FBTURBO=true
+             ENABLE_IPTABLES=false
+             ENABLE_USER=true
+             USER_NAME=ens-ife
+             ENABLE_ROOT=true
+             ENABLE_HARDNET=true
+             ENABLE_INITRAMFS=true
+             ENABLE_IFNAMES=true
+             #------------------------
+             ENABLE_ROOT_SSH=false
+             SSH_LIMIT_USERS=false
+             SSH_ROOT_PUB_KEY="/home/********/.ssh/authorized_keys"
+             SSH_USER_PUB_KEY="/home/********/.ssh/authorized_keys"
+             #------------------------
+             BUILD_KERNEL=true
+             KERNEL_REDUCE=false
+             KERNEL_HEADERS=true
+             KERNEL_REMOVESRC=true
+             KERNELSRC_CLEAN=true
+             KERNELSRC_CONFIG=true
+             #------------------------
+             REDUCE_APT=false
+             REDUCE_DOC=true
+             REDUCE_MAN=false
+             REDUCE_HWDB=true
+             REDUCE_BASH=false
+             REDUCE_SSHD=false
+             REDUCE_LOCALE=false
+             #-------------------------
+             ENABLE_CRYPTFS=false
+             #-------------------------
+             BASEDIR=/media/********/images/${RELEASE}
+             DATE=date
+            +%Y-%m-%d
+            IMAGE_NAME=${BASEDIR}/${DATE}-rpi${RPI_MODEL}-${RELEASE}
+            =======
             # Configuration file raspi2 Stretch IFÉ 2017/12/28
             #
             APT_SERVER=debian.mirrors.ovh.net
             APT_INCLUDES=""
             APT_INCLUDES_LATE="gnupg,firmware-linux-nonfree,firmware-linux,dh-autoreconf,\
             gettext,build-essential,git,cmake,libjson-c-dev,unzip,usbutils,\
             bison,libboost-all-dev,automake,autoconf,autogen,libtool,libtool-bin,\
             pkg-config,checkinstall,menulibre,libnotify-bin,pandoc,\
             python3,python3-dev,python3-pypandoc,python3-scipy,python3-tk,python3-pandocfilters,\
             python3-geopy,python3-pip,\
             python,python-dev,python-pypandoc,python-scipy,python-tk,python-pandocfilters,\
             python-geopy,python-pip,python-tk,pandoc,\
             python-configobj,python-cheetah,python-imaging,python-serial,python-usb,\
             pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,i2c-tools,python-smbus,policykit-1,\
             pmount,ntpdate,ntp,rsync,\
             texlive,texlive-xetex,nginx-extras,ffmpeg,wicd,wicd-gtk,console-data,keyboard-configuration,\
             libqtwebkit-dev,libqt5webkit5-dev,\
             libudev-dev,libzzip-dev,zlib1g-dev,libcanberra-gtk-module,libnss-myhostname,libfreetype6-dev,libpng16-16,\
             nmap,libltdl-dev,dbus-user-session,debian-archive-keyring,\
             xutils-dev,lxsession,openbox-lxde-session,lxde,x11proto-randr-dev,lxrandr,\
             tightvncserver,geany,geany-plugin-py,firefox-esr,firefox-esr-l10n-fr,jed,terminator,automake"
             #ca-certificates-java,icedtea-plugin,icedtea-netx,\
             #openjdk-8-jdk,openjdk-8-jre,openjdk-8-jre-headless,\
             #openjdk-9-jdk,openjdk-9-jre,openjdk-9-jre-headless"
             #----------------------
             RPI_MODEL=2
             RELEASE="stretch"
             RELEASE_ARCH="armhf"
             HOSTNAME="raspife2"
             PASSWORD="*****"
             USER_PASSWORD="*****"
             DEFLOCAL="fr_FR.UTF-8"
             TIMEZONE="Europe/Paris"
             EXPANDROOT=false
             #-----------------------
             XKB_MODEL="pc105"
             XKB_LAYOUT="fr"
             XKB_VARIANT="latin9"
             XKB_OPTIONS=""
             #------------------------
             ENABLE_DHCP=true
             #------------------------
             ENABLE_CONSOLE=false
             ENABLE_I2C=true
             ENABLE_SPI=true
             ENABLE_IPV6=true
             ENABLE_SSHD=true
             ENABLE_NONFREE=true
             ENABLE_WIRELESS=false
             ENABLE_RSYSLOG=true
             ENABLE_SOUND=true
             ENABLE_HWRANDOM=true
             ENABLE_MINGPU=true
             ENABLE_DBUS=true
             ENABLE_XORG=true
             ENABLE_WM="lxdm"
             #------------------------
             ENABLE_MINBASE=false
             ENABLE_REDUCE=false
             ENABLE_UBOOT=false
             ENABLE_FBTURBO=true
             ENABLE_IPTABLES=false
             ENABLE_USER=true
             USER_NAME=ens-ife
             ENABLE_ROOT=true
             ENABLE_HARDNET=true
             ENABLE_INITRAMFS=true
             ENABLE_IFNAMES=true
             #------------------------
             ENABLE_ROOT_SSH=false
             SSH_LIMIT_USERS=false
             SSH_ROOT_PUB_KEY="/home/*****/.ssh/id_rsa.pub"
             SSH_USER_PUB_KEY="/home/*****/.ssh/id_rsa.pub"
             #------------------------
             BUILD_KERNEL=true
             KERNEL_BRANCH=rpi-4.13.y
             KERNEL_REDUCE=false
             KERNEL_HEADERS=true
             KERNEL_REMOVESRC=true
             KERNELSRC_CLEAN=true
             KERNELSRC_CONFIG=true
             #------------------------
             REDUCE_APT=false
             REDUCE_DOC=true
             REDUCE_MAN=false
             REDUCE_HWDB=true
             REDUCE_BASH=false
             REDUCE_SSHD=false
             REDUCE_LOCALE=false
             #-------------------------
             ENABLE_CRYPTFS=false
             #-------------------------
             BASEDIR=/data/RpiGenImage/Images/${RELEASE}
             #BASEDIR=/media/*******/*********/Nano-Ordinateurs/RaspberryPi/RpiGenImage/Images/${RELEASE}
             DATE=`date +%Y-%m-%d`
             IMAGE_NAME=${BASEDIR}/${DATE}-rpi${RPI_MODEL}-${RELEASE}

templates/raspife3-buster +6 -4

-            # Configuration file raspi3 Buster IFÉ 2017/12/28
+            # Configuration file raspi3 Buster IFÉ 2017/11/01
             #
             APT_SERVER=debian.mirrors.ovh.net
             APT_INCLUDES=""
             APT_INCLUDES_LATE="gnupg,firmware-linux-nonfree,firmware-linux,dh-autoreconf,\
             gettext,build-essential,git,cmake,libjson-c-dev,unzip,usbutils,\
             bison,libboost-all-dev,automake,autoconf,autogen,libtool,libtool-bin,\
-            pkg-config,menulibre,libnotify-bin,pandoc,\
+            pkg-config,checkinstall,menulibre,libnotify-bin,pandoc,\
             python3,python3-dev,python3-pypandoc,python3-scipy,python3-tk,python3-pandocfilters,\
             python3-geopy,python3-pip,\
             python,python-dev,python-pypandoc,python-scipy,python-tk,python-pandocfilters,\
             python-geopy,python-pip,python-tk,pandoc,\
             python-configobj,python-cheetah,python-imaging,python-serial,python-usb,\
             pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,i2c-tools,python-smbus,policykit-1,\
             pmount,ntpdate,ntp,rsync,\
             texlive,texlive-xetex,nginx-extras,ffmpeg,wicd,wicd-gtk,console-data,keyboard-configuration,\
             libqtwebkit-dev,libqt5webkit5-dev,\
             libudev-dev,libzzip-dev,zlib1g-dev,libcanberra-gtk-module,libnss-myhostname,libfreetype6-dev,libpng16-16,\
             nmap,libltdl-dev,dbus-user-session,debian-archive-keyring,\
             xutils-dev,lxsession,openbox-lxde-session,lxde,x11proto-randr-dev,lxrandr,\
             tightvncserver,geany,geany-plugin-py,firefox-esr,firefox-esr-l10n-fr,jed,terminator,automake"
             #ca-certificates-java,icedtea-plugin,icedtea-netx,\
             #openjdk-8-jdk,openjdk-8-jre,openjdk-8-jre-headless,\
             #openjdk-9-jdk,openjdk-9-jre,openjdk-9-jre-headless"
             #----------------------
             RPI_MODEL=3
             RELEASE="buster"
             RELEASE_ARCH="armhf"
             HOSTNAME="raspife3"
-            PASSWORD="*****"
+            PASSWORD="***********"
-            USER_PASSWORD="*****"
+            USER_PASSWORD="*************"
             DEFLOCAL="fr_FR.UTF-8"
             TIMEZONE="Europe/Paris"
             EXPANDROOT=false
             #-----------------------
             XKB_MODEL="pc105"
             XKB_LAYOUT="fr"
             XKB_VARIANT="latin9"
             XKB_OPTIONS=""
             #------------------------
             ENABLE_DHCP=true
             #------------------------
             ENABLE_CONSOLE=false
             ENABLE_I2C=true
             ENABLE_SPI=true
             ENABLE_IPV6=true
             ENABLE_SSHD=true
             ENABLE_NONFREE=true
             ENABLE_WIRELESS=true
             ENABLE_RSYSLOG=true
             ENABLE_SOUND=true
             ENABLE_HWRANDOM=true
             ENABLE_MINGPU=true
             ENABLE_DBUS=true
             ENABLE_XORG=true
             ENABLE_WM="lxdm"
             #------------------------
             ENABLE_MINBASE=false
             ENABLE_REDUCE=false
             ENABLE_UBOOT=false
             ENABLE_FBTURBO=true
             ENABLE_IPTABLES=false
             ENABLE_USER=true
             USER_NAME=ens-ife
             ENABLE_ROOT=true
             ENABLE_HARDNET=true
             ENABLE_INITRAMFS=true
             ENABLE_IFNAMES=true
             #------------------------
             ENABLE_ROOT_SSH=false
             SSH_LIMIT_USERS=false
             SSH_ROOT_PUB_KEY="/home/*****/.ssh/authorized_keys"
             SSH_USER_PUB_KEY="/home/*****/.ssh/authorized_keys"
             #------------------------
             BUILD_KERNEL=true
             KERNEL_BRANCH=rpi-4.13.y
             KERNEL_REDUCE=false
             KERNEL_HEADERS=true
             KERNEL_REMOVESRC=true
             KERNELSRC_CLEAN=true
             KERNELSRC_CONFIG=true
             #------------------------
             REDUCE_APT=false
             REDUCE_DOC=true
             REDUCE_MAN=false
             REDUCE_HWDB=true
             REDUCE_BASH=false
             REDUCE_SSHD=false
             REDUCE_LOCALE=false
             #-------------------------
             ENABLE_CRYPTFS=false
             #-------------------------
             BASEDIR=/data/RpiGenImage/Images/${RELEASE}
             #BASEDIR=/media/*******/*********/Nano-Ordinateurs/RaspberryPi/RpiGenImage/Images/${RELEASE}
             DATE=`date +%Y-%m-%d`
             IMAGE_NAME=${BASEDIR}/${DATE}-rpi${RPI_MODEL}-${RELEASE}

templates/raspife3-stretch +17 -24

-            # Configuration file raspi3 Stretch IFÉ 2017/12/28
+            # Configuration file raspi3 Stretch IFÉ 2017/07/26
             #
-            APT_SERVER=debian.mirrors.ovh.net
+            APT_SERVER=ftp.fr.debian.org
-            APT_INCLUDES=""
+            APT_INCLUDES="gnupg,gnupg2,firmware-linux-nonfree,firmware-linux,dh-autoreconf,\
-            APT_INCLUDES_LATE="gnupg,firmware-linux-nonfree,firmware-linux,dh-autoreconf,\
             gettext,build-essential,git,cmake,libjson-c-dev,unzip,usbutils,\
             bison,libboost-all-dev,automake,autoconf,autogen,libtool,libtool-bin,\
-            pkg-config,checkinstall,libnotify-bin,pandoc,\
+            pkg-config,checkinstall,menulibre,libnotify-bin,pandoc,\
             python3,python3-dev,python3-pypandoc,python3-scipy,python3-tk,python3-pandocfilters,\
-            python3-geopy,python3-pip,\
             python,python-dev,python-pypandoc,python-scipy,python-tk,python-pandocfilters,\
-            python-geopy,python-pip,python-tk,\
+            python3-geopy,python3-pip,\
+            python-geopy,python-pip,\
             python-configobj,python-cheetah,python-imaging,python-serial,python-usb,\
-            python-mysqldb,python-smbus,\
+            pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,jed,i2c-tools,python-smbus,policykit-1,\
-            pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,i2c-tools,policykit-1,\
+            pmount,ntpdate,\
-            pmount,ntpdate,ntp,\
             texlive,texlive-xetex,nginx-extras,ffmpeg,wicd,wicd-gtk,console-data,keyboard-configuration,\
-            libqtwebkit-dev,libqt5webkit5-dev,\
+            icedtea-8-plugin,openjdk-8-jdk,openjdk-8-jre,openjdk-8-jre-headless,libqtwebkit-dev,libqt5webkit5-dev,\
             libudev-dev,libzzip-dev,zlib1g-dev,libcanberra-gtk-module,libnss-myhostname,libfreetype6-dev,libpng16-16,\
             nmap,libltdl-dev,dbus-user-session,debian-archive-keyring,\
-            menulibre,xutils-dev,lxsession,openbox-lxde-session,lxde,x11proto-randr-dev,lxrandr,\
+            xutils-dev,lxsession,openbox-lxde-session,lxde,x11proto-randr-dev,lxrandr,\
-            tightvncserver,geany,geany-plugin-py,firefox-esr,firefox-esr-l10n-fr,jed,terminator,automake"
+            tightvncserver,geany,geany-plugin-py,geany-plugin-markdown,firefox-esr,firefox-esr-l10n-fr"
-            #ca-certificates-java,icedtea-plugin,icedtea-netx,\
-            #openjdk-8-jdk,openjdk-8-jre,openjdk-8-jre-headless,\
-            #openjdk-9-jdk,openjdk-9-jre,openjdk-9-jre-headless"
             #----------------------
             RPI_MODEL=3
             RELEASE="stretch"
-            RELEASE_ARCH="armhf"
             HOSTNAME="raspife3"
-            PASSWORD="*****"
+            PASSWORD="**************"
-            USER_PASSWORD="*****"
+            USER_PASSWORD="***************
             DEFLOCAL="fr_FR.UTF-8"
             TIMEZONE="Europe/Paris"
             EXPANDROOT=false
             #-----------------------
             XKB_MODEL="pc105"
             XKB_LAYOUT="fr"
             XKB_VARIANT="latin9"
             XKB_OPTIONS=""
             #------------------------
             ENABLE_DHCP=true
             #------------------------
             ENABLE_CONSOLE=false
             ENABLE_I2C=true
             ENABLE_SPI=true
             ENABLE_IPV6=true
             ENABLE_SSHD=true
             ENABLE_NONFREE=true
             ENABLE_WIRELESS=true
             ENABLE_RSYSLOG=true
             ENABLE_SOUND=true
             ENABLE_HWRANDOM=true
             ENABLE_MINGPU=true
             ENABLE_DBUS=true
             ENABLE_XORG=true
             ENABLE_WM="lxdm"
             #------------------------
             ENABLE_MINBASE=false
             ENABLE_REDUCE=false
             ENABLE_UBOOT=false
             ENABLE_FBTURBO=true
             ENABLE_IPTABLES=false
             ENABLE_USER=true
             USER_NAME=ens-ife
             ENABLE_ROOT=true
             ENABLE_HARDNET=true
             ENABLE_INITRAMFS=true
             ENABLE_IFNAMES=true
             #------------------------
             ENABLE_ROOT_SSH=false
-            SSH_LIMIT_USERS=false
+            SSH_LIMIT_USERS=fal
-            SSH_ROOT_PUB_KEY="/home/*****/.ssh/authorized_keys"
+            SSH_ROOT_PUB_KEY="/home/*******/.ssh/authorized_keys"
-            SSH_USER_PUB_KEY="/home/*****/.ssh/authorized_keys"
+            SSH_USER_PUB_KEY="/home/*******/.ssh/authorized_keys"
             #------------------------
             BUILD_KERNEL=true
-            KERNEL_BRANCH=rpi-4.13.y
             KERNEL_REDUCE=false
             KERNEL_HEADERS=true
             KERNEL_REMOVESRC=true
             KERNELSRC_CLEAN=true
             KERNELSRC_CONFIG=true
             #------------------------
             REDUCE_APT=false
             REDUCE_DOC=true
             REDUCE_MAN=false
             REDUCE_HWDB=true
             REDUCE_BASH=false
             REDUCE_SSHD=false
             REDUCE_LOCALE=false
             #-------------------------
             ENABLE_CRYPTFS=false
             #-------------------------
             BASEDIR=/data/RpiGenImage/Images/${RELEASE}
-            #BASEDIR=/media/*******/*********/Nano-Ordinateurs/RaspberryPi/RpiGenImage/Images/${RELEASE}
             DATE=`date +%Y-%m-%d`
             IMAGE_NAME=${BASEDIR}/${DATE}-rpi${RPI_MODEL}-${RELEASE}

templates/raspife3W-stretch +21 -26

-            # Configuration file raspi3 Stretch Weewx IFÉ 2017/12/28
+            # Configuration file raspi3 Stretch Weewx IFÉ 2017/07/26
             #
-            APT_SERVER=debian.mirrors.ovh.net
+            APT_SERVER=ftp.fr.debian.org
-            APT_INCLUDES=""
+            APT_INCLUDES="debian-archive-keyring,debian-keyring,automake,autoconf,autogen,gawk,gnupg,gnupg2,\
-            APT_INCLUDES_LATE="gnupg,debian-keyring,gawk,\
+            build-essential,git,cmake,libjson-c-dev,unzip,\
-            build-essential,git,cmake,libjson-c-dev,unzip,usbutils,\
+            bison,libboost-all-dev,libtool,libtool-bin,pkg-config,checkinstall,libnotify-bin,pandoc,\
-            bison,libboost-all-dev,automake,autoconf,autogen,libtool,libtool-bin,\
+            python3,python3-dev,python,python-dev,python-configobj,python-cheetah,python-mysqldb\
-            pkg-config,checkinstall,libnotify-bin,pandoc,\
+            python-imaging,python-serial,python-usb,python-tk,python3-tk,python3-scipy,\
-            python3,python3-dev,python3-pypandoc,python3-scipy,python3-tk,python3-pandocfilters,\
+            python-pypandoc,python3-pypandoc,python-pandocfilters,python3-pandocfilters,\
-            python3-geopy,python3-pip,\
+            python-geopy,python3-geopy,python-pip,python3-pip,python-smbus,\
-            python,python-dev,python-pypandoc,python-scipy,python-tk,python-pandocfilters,\
+            libudev-dev,libzzip-dev,zlib1g-dev,libnss-myhostname,libpng16-16,nmap,\
-            python-geopy,python-pip,python-tk,\
+            libltdl-dev,usbutils,pmount,ntpdate,texlive,texlive-xetex,nginx-extras,policykit-1,\
-            python-configobj,python-cheetah,python-imaging,python-serial,python-usb,\
+            openjdk-8-jdk-headless,openjdk-8-jre-headless,\
-            python-mysqldb,python-smbus,\
+            pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,i2c-tools"
-            pcre2-utils,libpcre++-dev,libpcre2-dev,libjpeg-dev,i2c-tools,policykit-1,\
-            pmount,ntpdate,rsync,\
-            libudev-dev,libzzip-dev,zlib1g-dev,libcanberra-gtk-module,libnss-myhostname,libfreetype6-dev,libpng16-16,\
-            nmap,libltdl-dev,debian-archive-keyring,texlive,texlive-xetex,nginx-extras"
-            #openjdk-8-jdk-headless,openjdk-8-jre-headless"
             #----------------------
             RPI_MODEL=3
             RELEASE="stretch"
-            RELEASE_ARCH="armhf"
             HOSTNAME="raspwife3"
-            PASSWORD="*****"
+            PASSWORD="************"
-            USER_PASSWORD="*****"
+            USER_PASSWORD="************"
             DEFLOCAL="fr_FR.UTF-8"
             TIMEZONE="Europe/Paris"
             EXPANDROOT=false
             #-----------------------
             XKB_MODEL="pc105"
             XKB_LAYOUT="fr"
             XKB_VARIANT="latin9"
             XKB_OPTIONS=""
             #------------------------
             ENABLE_DHCP=false
             NET_ADDRESS="192.168.***.***/24"
-            NET_GATEWAY="192.168.***.***"
+            NET_GATEWAY="192.168.***.1"
-            NET_DNS_1="192.168.***.***"
+            NET_DNS_1="192.168.***.1"
             NET_DNS_2="8.8.8.8"
             #------------------------
             ENABLE_CONSOLE=false
             ENABLE_I2C=true
             ENABLE_SPI=true
             ENABLE_IPV6=true
             ENABLE_SSHD=true
             ENABLE_NONFREE=true
             ENABLE_WIRELESS=true
             ENABLE_RSYSLOG=true
             ENABLE_SOUND=true
             ENABLE_HWRANDOM=true
             ENABLE_MINGPU=true
             ENABLE_DBUS=true
             ENABLE_XORG=false
             ENABLE_WM=""
             #------------------------
             ENABLE_MINBASE=false
             ENABLE_REDUCE=false
             ENABLE_UBOOT=false
             ENABLE_FBTURBO=false
             ENABLE_IPTABLES=false
             ENABLE_USER=true
             USER_NAME=ens-ife
             ENABLE_ROOT=true
             ENABLE_HARDNET=true
             ENABLE_INITRAMFS=true
             ENABLE_IFNAMES=true
             #------------------------
             ENABLE_ROOT_SSH=false
             SSH_LIMIT_USERS=false
-            SSH_ROOT_PUB_KEY="/home/*****/.ssh/authorized_keys"
+            SSH_ROOT_PUB_KEY="/home/*******/.ssh/authorized_keys"
-            SSH_USER_PUB_KEY="/home/*****/.ssh/authorized_keys"
+            SSH_USER_PUB_KEY="/home/*******/.ssh/authorized_keys"
             #------------------------
             BUILD_KERNEL=true
-            KERNEL_BRANCH=rpi-4.13.y
             KERNEL_REDUCE=false
             KERNEL_HEADERS=true
             KERNEL_REMOVESRC=true
             KERNELSRC_CLEAN=true
             KERNELSRC_CONFIG=true
             #------------------------
             REDUCE_APT=false
             REDUCE_DOC=true
             REDUCE_MAN=false
             REDUCE_HWDB=true
             REDUCE_BASH=false
             REDUCE_SSHD=false
             REDUCE_LOCALE=false
             #-------------------------
             ENABLE_CRYPTFS=false
             #-------------------------
             BASEDIR=/data/RpiGenImage/Images/${RELEASE}
             DATE=`date +%Y-%m-%d`
             IMAGE_NAME=${BASEDIR}/${DATE}-rpiw${RPI_MODEL}-${RELEASE}

General Comments 0

Écrire
Preview

Vous devez vous connecter pour laisser un commentaire. Se connecter maintenant

No TODOs yet

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Dépôts
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages