Raspberries/mraa
Private
Public Access
2
0
Fork 0
Code Activity

Joule: Update references to the Intel Joule

Browse Source 
GT/GrosseTete -> Joule. This commit deprecates the MRAA_INTEL_GT_TUCHUCK
mraa_platform_t value and links the grossetete.md page to joule.md.

Signed-off-by: Wai Lun Poon <wai.lun.poon@intel.com>
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
This commit is contained in:
Wai Lun
2017-02-24 16:37:45 -05:00
committed by Brendan Le Foll
parent 2c529689ed
commit 0092e13f57
13 changed files with 171 additions and 163 deletions
Download Patch File Download Diff File Expand all files Collapse all files

138
docs/grossetete.md
View File

@@ -1,137 +1,5 @@
Intel Joule {#grossetete}
===========
{#grossetete}
The Joule Board with the daughterboard (Tuchuck) board is supported by Mraa
You probably meant to go here: @joule.
Revision Support
----------------
Tuchuck
Interface notes
---------------
**SPI**
Two SPI buses are available, with one chipselect each. Pins listed are MRAA
numbered pins. Other chip selects are available if enabled in BIOS/EEPROM but
cannot be enabled as BIOS options. You will need the spidev kernel module
loaded, Ostro-XT does this by default.
Bus 0 (32765)
MOSI = 2
MISO = 4
CS = 6
CLK = 10
Bus 1 (32766)
MOSI = 67
MISO = 69
CS0 = 59
CS1 = 61
CLK = 65
(remove 40 from numbers to get pin header number for pins on low speed header
2)
**UART** Some pins are labelled as UARTs but are not configured in BIOS as UART
so only available UART is on the FTDI header. Disable the getty on ttyS2 and
use mraa's uart raw mode to initialise on ttyS2. The Jumper J8 can be used to
switch between using the FTDI 6 pin header and the micro USB output.
Pin Mapping
-----------
Tuchuck has two breakouts, breakout #1 is 1-40 whilst breakout2 is 41-80. The
LEDs are numbered from 100-103.
| MRAA Number | Physical Pin | Function |
|-------------|--------------|----------|
| 1 | GPIO | GPIO |
| 2 | SPP1RX | GPIO SPI |
| 3 | PMICRST | NONE |
| 4 | SPP1TX | GPIO SPI |
| 5 | 19.2mhz | GPIO |
| 6 | SPP1FS0 | GPIO SPI |
| 7 | UART0TX | GPIO |
| 8 | SPP1FS2 | GPIO SPI |
| 9 | PWRGD | NONE |
| 10 | SPP1CLK | GPIO SPI |
| 11 | I2C0SDA | I2C |
| 12 | I2S1SDI | GPIO |
| 13 | I2C0SCL | I2C |
| 14 | I2S1SDO | GPIO |
| 15 | I2C1SDA | I2C |
| 16 | I2S1WS | GPIO |
| 17 | I2C1SCL | I2C |
| 18 | I2S1CLK | GPIO |
| 19 | I2C2SDA | I2C |
| 20 | I2S1MCL | GPIO |
| 21 | I2C2SCL | I2CO |
| 22 | UART1TX | UART |
| 23 | I2S4SDO | NONE |
| 24 | UART1RX | UART |
| 25 | I2S4SDI | NONE |
| 26 | PWM0 | GPIO PWM |
| 27 | I2S4BLK | GPIO |
| 28 | PWM1 | GPIO PWM |
| 29 | I2S4WS | NONE |
| 30 | PWM2 | GPIO PWM |
| 31 | I2S3SDO | NONE |
| 32 | PWM3 | GPIO PWM |
| 33 | I2S3SDI | NONE |
| 34 | 1.8V | NONE |
| 35 | I2S4BLK | GPIO |
| 36 | GND | NONE |
| 37 | GND | NONE |
| 38 | GND | NONE |
| 39 | GND | NONE |
| 40 | 3.3V | NONE |
| 41 | GND | NONE |
| 42 | 5V | NONE |
| 43 | GND | NONE |
| 44 | 5V | NONE |
| 45 | GND | NONE |
| 46 | 3.3V | NONE |
| 47 | GND | NONE |
| 48 | 3.3V | NONE |
| 49 | GND | NONE |
| 50 | 1.8V | NONE |
| 51 | GPIO | GPIO |
| 52 | 1.8V | NONE |
| 53 | PANEL | GPIO |
| 54 | GND | NONE |
| 55 | PANEL | GPIO |
| 56 | CAMERA | NONE |
| 57 | PANEL | GPIO |
| 58 | CAMERA | NONE |
| 59 | SPP0FS0 | GPIO SPI |
| 60 | CAMERA | NONE |
| 61 | SPP0FS1 | GPIO SPI |
| 62 | SPI_DAT | SPI |
| 63 | SPP0FS2 | GPIO SPI |
| 64 | SPICLKB | GPIO |
| 65 | SPP0FS3 | GPIO SPI |
| 66 | SPICLKA | GPIO |
| 67 | SPP0TX | GPIO SPI |
| 68 | UART0RX | GPIO UART|
| 69 | SPP0RX | GPIO SPI |
| 70 | UART0RT | GPIO UART|
| 71 | I2C1SDA | GPIO I2C |
| 72 | UART0CT | GPIO UART|
| 73 | I2C1SCL | GPIO I2C |
| 74 | UART1TX | GPIO UART|
| 75 | I2C2SDA | GPIO I2C |
| 76 | UART1RX | GPIO UART|
| 77 | I2C1SCL | GPIO I2C |
| 78 | UART1RT | GPIO UART|
| 79 | RTC_CLK | GPIO |
| 80 | UART1CT | GPIO UART|
| 100 | LED100 | GPIO |
| 101 | LED101 | GPIO |
| 102 | LED102 | GPIO |
| 103 | LED103 | GPIO |
| 104 | LEDWIFI | GPIO |
| 105 | LEDBT | GPIO |
To see a live pin mapping use the command:
$ mraa-gpio list
Note: This page will be deleted in the future, don't link to it!